[collectd.git] / src / collectd-python.pod

=head1 NAME

collectd-python - Documentation of collectd's C<python plugin>

=head1 SYNOPSIS

  <LoadPlugin python>
    Globals true
  </LoadPlugin>
  # ...
  <Plugin python>
    ModulePath "/path/to/your/python/modules"
    LogTraces true
    Interactive true
    Import "spam"

    <Module spam>
      spam "wonderful" "lovely"
    </Module>
  </Plugin>

=head1 DESCRIPTION

The C<python plugin> embeds a Python-interpreter into collectd and provides an
interface to collectd's plugin system. This makes it possible to write plugins
for collectd in Python. This is a lot more efficient than executing a
Python-script every time you want to read a value with the C<exec plugin> (see
L<collectd-exec(5)>) and provides a lot more functionality, too.

Currently only python2 is supported and at least version 2.3 is required.

=head1 CONFIGURATION

=over 4

=item B<LoadPlugin> I<Plugin>

Loads the Python plugin I<Plugin>. Unlike most other LoadPlugin lines, this one
should be a block containing the line "Globals true". This will cause collectd
to export the name of all objects in the python interpreter for all plugins to
see. If you don't do this or your platform does not support it, the embeded
interpreter will start anywa but you won't be able to load certain python
modules, e.g. "time".

=item B<Encoding> I<Name>

The default encoding for unicode objects you pass to collectd. If you obmit
this option it will default to B<ascii> on python2 and B<utf-8> on python3.
This is hardcoded in python and will ignore everything else, including your
locale.

=item B<ModulePath> I<Name>

Appends I<Name> to B<sys.path>. You won't be able to import any scripts you
wrote unless they are located in one of the directuries in this list. Please
note that it only has effect on plugins loaded after this option.

=item B<LogTraces> I<bool>

If a python script throws an exception it will be logged by collectd with the
name of the exception and the message. If you set this option to true it will
also log the full stacktrace just like the default output of an interactive
python interpreter. This should probably be set to false most of the time but
is very useful for development and debugging of new modules.

=item B<Interactive> I<bool>

This option will causethe module to launch an interactive python interpreter
that reads from and writes to the terminal. Note that collectd will terminate
right after starting up if you try to run it as a daemon while this option is
enabled to make sure to start collectd with the B<-f> option.

The B<collectd> module is I<not> imported into the interpreter's globals. You
have to do it manually. Be sure to read the help text of the module, it can be
used as a reference guide during coding.

This interactive session will behave slightly differently from a daemonized
collectd script as well as from a normal python interpreter:
1. collectd will try to import the B<readline> module to give you a decent
way of entering your commmands. The daemonized collectd won't do that.
2. collectd will block SIGINT. Pressing Ctrl+C will usually cause collectd to
shut down. This would be problematic in an interactive session, therefore this
signal will be blocked. You can still use it to interrupt syscalls like sleep
and pause but it won't generate a KeyboardInterrupt exception either.

To quit collectd send EOF (press Ctrl+D at the beginning of a new line).

=item E<lt>B<Module> I<Name>E<gt> block

This block may be used to pass on configuration settings to a Python module.
The configuration is converted into an instance of the B<Config> class which
is passed to the registered configuration callback. See below for details about
the B<Config> class and how to register callbacks.

The I<name> identifies the callback.

=back

=head1 WRITING YOUR OWN PLUGINS

Writing your own plugins is quite simple. collectd manages plugins by means of
B<dispatch functions> which call the appropriate B<callback functions>
registered by the plugins. Any plugin basically consists of the implementation
of these callback functions and initializing code which registers the
functions with collectd. See the section "EXAMPLES" below for a really basic
example. The following types of B<callback functions> are known to collectd
(all of them are optional):

=over 4

=item configuration functions

This type of functions is called during configuration if an appropriate
B<Module> block has been encountered. It is called once for each B<Module>
block which matches the name of the callback as provided with the
B<register_config> method - see below.

Python thread support has not been initialized at this point so do not use any
threading functions here!

=item init functions

This type of functions is called once after loading the module and before any
calls to the read and write functions. It should be used to initialize the
internal state of the plugin (e.E<nbsp>g. open sockets, ...). This is the
earliest point where you may use threads.

=item read functions

This type of function is used to collect the actual data. It is called once
per interval (see the B<Interval> configuration option of collectd). Usually
it will call B<plugin_dispatch_values> to dispatch the values to collectd
which will pass them on to all registered B<write functions>. If this function
throws any kind of exception the plugin will be skipped for an increasing
amount of time until it returns normally again.

=item write functions

This type of function is used to write the dispatched values. It is called
once for every value that was dispatched by any plugin.

=item flush functions

This type of function is used to flush internal caches of plugins. It is
usually triggered by the user only. Any plugin which caches data before
writing it to disk should provide this kind of callback function.

=item log functions

This type of function is used to pass messages of plugins or the daemon itself
to the user.

=item notification function

This type of function is used to act upon notifications. In general, a
notification is a status message that may be associated with a data instance.
Usually, a notification is generated by the daemon if a configured threshold
has been exceeded (see the section "THRESHOLD CONFIGURATION" in
L<collectd.conf(5)> for more details), but any plugin may dispatch
notifications as well.

=item shutdown functions

This type of function is called once before the daemon shuts down. It should
be used to clean up the plugin (e.g. close sockets, ...).

=back

Any function (except log functions) may set throw an exception in case of any
errors. The exception will be passed on to the user using collectd's logging
mechanism. If a log callback throws an exception it will be printed to stderr
instead.

See the documentation of the various B<register_> methods in the section
"FUNCTIONS" below for the number and types of arguments passed to each
B<callback function>. This section also explains how to register B<callback
functions> with collectd.

To enable a module, copy it to a place where Python can find it (i.E<nbsp>e. a
directory listed in B<sys.path>) just as any other Python plugin and add
an appropriate B<Import> option to the configuration file. After restarting
collectd you're done.

=head1 CLASSES

The following complex types are used to pass values between the Python plugin
and collectd:

=over 4

=item Config

The Config class is an object which keeps the informations provided in the
configuration file. The sequence of children keeps one entry for each
configuration option. Each such entry is another Config instance, which
may nest further if nested blocks are used.

class Config(object)
 |  This represents a piece of collectd's config file.
 |  It is passed to scripts with config callbacks (see B<register_config>)
 |  and is of little use if created somewhere else.
 |
 |  It has no methods beyond the bare minimum and only exists for its
 |  data members
 |
 |  ----------------------------------------------------------------------
 |  Data descriptors defined here:
 |
 |  parent
 |      This represents the parent of this node. On the root node
 |      of the config tree it will be None.
 |
 |  key
 |      This is the keyword of this item, ie the first word of any
 |      given line in the config file. It will always be a string.
 |
 |  values
 |      This is a tuple (which might be empty) of all value, ie words
 |      following the keyword in any given line in the config file.
 |
 |      Every item in this tuple will be either a string or a float or a bool,
 |      depending on the contents of the configuration file.
 |
 |  children
 |      This is a tuple of child nodes. For most nodes this will be
 |      empty. If this node represents a block instead of a single line of the config
 |      file it will contain all nodes in this block.


=item PluginData

This should not be used directly but it is the base class for both Values and
Notification. It is used to identify the source of a value or notification.

class PluginData(object)
 |  This is an internal class that is the base for Values
 |  and Notification. It is pretty useless by itself and was therefore not
 |  exported to the collectd module.
 |
 |  ----------------------------------------------------------------------
 |  Data descriptors defined here:
 |
 |  host
 |      The hostname of the host this value was read from.
 |      For dispatching this can be set to an empty string which means
 |      the local hostname as defined in collectd.conf.
 |
 |  plugin
 |      The name of the plugin that read the data. Setting this
 |      member to an empty string will insert "python" upon dispatching.
 |
 |  plugin_instance
 |
 |  time
 |      This is the Unix timestap of the time this value was read.
 |      For dispatching values this can be set to 0 which means "now".
 |      This means the time the value is actually dispatched, not the time
 |      it was set to 0.
 |
 |  type
 |      The type of this value. This type has to be defined
 |      in your types.db. Attempting to set it to any other value will
 |      raise a TypeError exception.
 |      Assigning a type is mandetory, calling dispatch without doing
 |      so will raise a RuntimeError exception.
 |
 |  type_instance


=item Values

A Value is an object which features a sequence of values. It is based on then
I<PluginData> type and uses its members to identify the values.

class Values(PluginData)
 |  A Values object used for dispatching values to collectd and receiving
 |  values from write callbacks.
 |  
 |  Method resolution order:
 |      Values
 |      PluginData
 |      object
 |  
 |  Methods defined here:
 |  
 |  dispatch(...)
 |      dispatch([type][, values][, plugin_instance][, type_instance][, plugin][, host][, time][, interval]) -> None.  Dispatch a value list.
 |      
 |      Dispatch this instance to the collectd process. The object has members
 |      for each of the possible arguments for this method. For a detailed
 |      explanation of these parameters see the member of the same same.
 |      
 |      If you do not submit a parameter the value saved in its member will be
 |      submitted. If you do provide a parameter it will be used instead,
 |      without altering the member.
 |  
 |  write(...)
 |      write([destination][, type][, values][, plugin_instance][, type_instance][, plugin][, host][, time][, interval]) -> None.  Dispatch a value list.
 |
 |      Write this instance to a single plugin or all plugins if 'destination' is obmitted.
 |      This will bypass the main collectd process and all filtering and caching.
 |      Other than that it works similar to 'dispatch'. In most cases 'dispatch' should be
 |      used instead of 'write'.
 |
 |  ----------------------------------------------------------------------
 |  Data descriptors defined here:
 |  
 |  interval
 |      The interval is the timespan in seconds between two submits for the
 |      same data source. This value has to be a positive integer, so you can't
 |      submit more than one value per second. If this member is set to a
 |      non-positive value, the default value as specified in the config file
 |      will be used (default: 10).
 |      
 |      If you submit values more often than the specified interval, the average
 |      will be used. If you submit less values, your graphs will have gaps.
 |  
 |  values
 |      These are the actual values that get dispatched to collectd.
 |      It has to be a sequence (a tuple or list) of numbers.
 |      The size of the sequence and the type of its content depend on the type
 |      member your types.db file. For more information on this read the
 |      types.db man page.
 |      
 |      If the sequence does not have the correct size upon dispatch a
 |      RuntimeError exception will be raised. If the content of the sequence
 |      is not a number, a TypeError exception will be raised.


=item Notification

A notification is an object defining the severity and message of the status
message as well as an identification of a data instance by means of the members
of PluginData on which it is based.

class Notification(PluginData)
 |  The Notification class is a wrapper around the collectd notification.
 |  It can be used to notify other plugins about bad stuff happening. It works
 |  similar to Values but has a severity and a message instead of interval
 |  and time.
 |  Notifications can be dispatched at any time and can be received with
 |  register_notification.
 |  
 |  Method resolution order:
 |      Notification
 |      PluginData
 |      object
 |  
 |  Methods defined here:
 |  
 |  dispatch(...)
 |      dispatch([type][, values][, plugin_instance][, type_instance][, plugin][, host][, time][, interval]) -> None.  Dispatch a value list.
 |      
 |      Dispatch this instance to the collectd process. The object has members
 |      for each of the possible arguments for this method. For a detailed
 |      explanation of these parameters see the member of the same same.
 |      
 |      If you do not submit a parameter the value saved in its member will be
 |      submitted. If you do provide a parameter it will be used instead,
 |      without altering the member.
 |  
 |  ----------------------------------------------------------------------
 |  Data descriptors defined here:
 |  
 |  message
 |      Some kind of description what's going on and why this Notification
 |      was generated.
 |  
 |  severity
 |      The severity of this notification. Assign or compare to
 |      NOTIF_FAILURE, NOTIF_WARNING or NOTIF_OKAY.


=back

=head1 FUNCTIONS

The following functions provide the C-interface to Python-modules.

=over 4

=item B<register_*>(I<callback>[, I<data>][, I<name>]) -> identifier

There are eight different register functions to get callback for eight
different events. With one exception all of them are called as shown above.

=over 4

=item

I<callback> is a callable object that will be called every time the event is
triggered.

=item

I<data> is an optional object that will be passed back to the callback function
every time it is called. If you obmit this parameter no object is passed back
to your callback, not even None.

=item

I<name> is an optional identifier for this callback. The default name is
B<python>.I<module>. I<module> is taken from the B<__module__> attribute of
your callback function. Every callback needs a unique identifier, so if you
want to register the same callback multiple time in the same module you need to
specify a name here. Otherwise it's save to ignore this parameter I<identifier>
is the full identifier assigned to this callback.

=back

These functions are called in the various stages of the daemon (see the section
L<"WRITING YOUR OWN PLUGINS"> above) and are passed the following arguments:

=over 4

=item register_config

The only argument passed is a I<Config> object. See above for the layout of this
data type.
Note that you can not receive the whole config files this way, only B<Module>
blocks inside the Python configuration block. Additionally you will only
receive blocks where your callback identifier matches B<python.>I<blockname>.

=item register_init

The callback will be called without arguments.

=item register_read(callback[, interval][, data][, name]) -> identifier

This function takes an additional parameter: I<interval>. It specifies the
time between calls to the callback function.

The callback will be called without arguments.

=item register_shutdown

The callback will be called without arguments.

=item register_write

The callback function will be called with one arguments passed, which will be a
I<Values> object. For the layout of I<Values> see above.
If this callback function throws an exception the next call will be delayed by
an increasing interval.

=item register_flush

Like B<register_config> is important for this callbavk because it determines
what flush requests the plugin will receive.

The arguments passed are I<timeout> and I<identifier>. I<timeout> indicates
that only data older than I<timeout> seconds is to be flushed. I<identifier>
specifies which values are to be flushed.

=item register_log

The arguments are I<severity> and I<message>. The severity is an integer and
small for important messages and high for less important messages. The least
important level is B<LOG_DEBUG>, the most important level is B<LOG_ERR>. In
between there are (from least to most important): B<LOG_INFO>, B<LOG_NOTICE>,
and B<LOG_WARNING>. I<message> is simply a string B<without> a newline at the
end.

If this callback throws an exception it will B<not> be logged. It will just be
printed to sys.stderr which usually means silently ignored.

=item register_notification

The only argument passed is a I<Notification> object. See above for the layout of this
data type.

=back

=item B<unregister_*>(I<identifier>) -> None

Removes a callback or data-set from collectd's internal list of callback
functions. Every register_* function has an unregister_* function. I<identifier>
is either the string that was returned by the register function or a callback
function. The identifier will be constructed in the same way as for the
register functions.

=item B<flush>(I<plugin[, I<timeout>][, I<identifier>]) -> None

Flush one or all plugins. I<timeout> and the specified I<identifiers> are
passed on to the registered flush-callbacks. If omitted, the timeout defaults
to C<-1>. The identifier defaults to None. If the B<plugin> argument has been
specified, only named plugin will be flushed.

=item B<error>, B<warning>, B<notice>, B<info>, B<debug>(I<message>)

Log a message with the specified severity.

=back

=head1 EXAMPLES

Any Python module will start similar to:

  import collectd

A very simple read function might look like:

  def read(data=None):
    vl = collectd.Values(type='gauge')
    vl.plugin='python.spam'
    vl.dispatch(values=[random.random() * 100])

A very simple write function might look like:

  def write(vl, data=None):
    for i in vl.values:
      print "%s (%s): %f" % (vl.plugin, vl.type, i)

To register those functions with collectd:

  collectd.register_read(read);
  collectd.register_write(write);

See the section L<"CLASSES"> above for a complete documentation of the data
types used by the read, write and match functions.

=head1 NOTES

=over 4

=item

Please feel free to send in new plugins to collectd's mailinglist at
E<lt>collectdE<nbsp>atE<nbsp>verplant.orgE<gt> for review and, possibly,
inclusion in the main distribution. In the latter case, we will take care of
keeping the plugin up to date and adapting it to new versions of collectd.

Before submitting your plugin, please take a look at
L<http://collectd.org/dev-info.shtml>.

=back

=head1 CAVEATS

=over 4

=item

collectd is heavily multi-threaded. Each collectd thread accessing the python
plugin will be mapped to a Python interpreter thread. Any such thread will be
created and destroyed transparently and on-the-fly.

Hence, any plugin has to be thread-safe if it provides several entry points
from collectd (i.E<nbsp>e. if it registers more than one callback or if a
registered callback may be called more than once in parallel).

=item

The Python thread module is initialized just before calling the init callbacks.
This means you must not use Python's threading module prior to this point. This
includes all config and possibly other callback as well.

=item

The python plugin exports the internal API of collectd which is considered
unstable and subject to change at any time. We try hard to not break backwards
compatibility in the Python API during the life cycle of one major release.
However, this cannot be guaranteed at all times. Watch out for warnings
dispatched by the python plugin after upgrades.

=back

=head1 KNOWN BUGS

=over 4

=item

This plugin is not compatible with python3. Trying to complie it with python3
will fail because of the ways string, unicode and bytearray bahavior was
changed.

Not all aspects of the collectd API are accessable from python. This includes
but is not limited to meta-data, filters and data sets.

=back

=head1 SEE ALSO

L<collectd(1)>,
L<collectd.conf(5)>,
L<collectd-perl(5)>,
L<collectd-exec(5)>,
L<types.db(5)>,
L<python(1)>,

=head1 AUTHOR

The C<python plugin> has been written by Sebastian Harl
E<lt>shE<nbsp>atE<nbsp>tokkee.orgE<gt>.

This manpage has been written by Florian Forster
E<lt>octoE<nbsp>atE<nbsp>verplant.orgE<gt> and Sebastian Harl
E<lt>shE<nbsp>atE<nbsp>tokkee.orgE<gt>.

=cut