SMF is the way Solaris 10 and later preferably manages services. It is intended
to replace the old init.d process and provides advances features, such as
automatic restarting of failing services.

The following blog entry by Piotr Hosowicz describes the process in more
detail. The original entry can be found at
<http://phosowicz.jogger.pl/2008/12/21/smf-izing-collectd/>.

The files in this directory are:

  README          This file
  collectd        Start / stop script
  collectd.xml    SMF manifest for collectd.

------------------------------------------------------------------------

      SMF-izing collectd <#>

Wpis na 0. poziomie, wysłany 21 grudnia 2008 o 16:30:49.

My two previous blog entries were about building and running collectd
<http://collectd.org/> on Sun Solaris 10. After the first one Octo
contacted me and was so kind as to release a packaged version for x86_64
<http://collectd.org/download.shtml#solaris>. I have put aside the build
I rolled on my own and decided to install and run the packaged one on
the production servers. This blog entry is about SMF-izing the collectd
daemon.

A few words about the SMF – the Solaris'es Service Management Facility.
I think it appeared in Solaris 10. From then on the good old |/etc/rcN.d
|| /etc/init.d| services are called /legacy services/. They still can be
run, but are not fully supported by SMF. SMF enables you to start and
stop services in the unified way, can direct you to man pages in case a
service enters maintenance mode, resolves dependencies between services,
can store properties of services and so on. A nice feature is that SMF
will take care of restarting services in case they terminate
unexpectedly, we will use it at the end to check that things are working
as they should.

The 3V|L thing about SMF is that each service needs so called SMF
manifest written in XML and a script or scripts that are executed, when
the service needs to be stopped or started. It can be one script, which
should accept respective parameters. Even more 3V|L is the fact that the
manifest is imported into the SMF database and kept there in SQLite format.

Below you will find collectd manifest and the script. I will post them
to collectd mailing list in matter of minutes with this blog entry
serving as a README. Please read all down to the bottom, including the
remarks.

Manifest (based on the work of Kangurek, thanks!), see the "collectd.xml"
file:
 
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
 
<service_bundle type='manifest' name='collectd'>
<service
        name='application/collectd'
        type='service'
        version='1'>
 
	<create_default_instance enabled='true' />
 
	<single_instance/>
 
        <dependency
                name='network'
                grouping='require_all'
                restart_on='none'
                type='service'>
                <service_fmri value='svc:/milestone/network:default' />
        </dependency> 
 
        <dependency
                name='filesystem-local'
                grouping='require_all'
                restart_on='none'
                type='service'>
                <service_fmri value='svc:/system/filesystem/local:default' />
        </dependency> 
 
        <exec_method
                type='method'
                name='start'
                exec='/lib/svc/method/collectd start'
                timeout_seconds='60'>
	    <method_context>
            	<method_credential user='root' group='root' />
    	    </method_context>
	</exec_method>
 
 
        <exec_method
                type='method'
                name='stop'
                exec='/lib/svc/method/collectd stop'
                timeout_seconds='60'>
	    <method_context>
            	<method_credential user='root' group='root' />
    	    </method_context>
	</exec_method>
 
        <stability value='Evolving' />
 
</service>
 
</service_bundle>
 
 

Script, see the "collectd" file:

 
#!/sbin/sh
 
PIDFILE=/opt/collectd/var/run/collectd.pid
DAEMON=/opt/collectd/sbin/collectd
 
. /lib/svc/share/smf_include.sh
 
case "$1" in
  start)
    if [ -f $PIDFILE ] ; then
      echo "Already running. Stale PID file?"
      PID=`cat $PIDFILE`
      echo "$PIDFILE contains $PID"
      ps -p $PID
      exit $SMF_EXIT_ERR_FATAL
    fi
    $DAEMON
    if [ $? -ne 0 ] ; then
      echo $DAEMON faild to start
      exit $SMF_EXIT_ERR_FATAL
    fi
  ;;
  stop)
    PID=`cat $PIDFILE 2>/dev/null`
    kill -15 $PID 2>/dev/null
    pwait $PID 1> /dev/null 2>/dev/null
  ;;
  restart)
    $0 stop
    $0 start
  ;;
  status)
    ps -ef | grep collectd | grep -v status | grep -v grep
  ;;
  *)
    echo "Usage: $0 [ start | stop | restart | status ]"
    exit 1
  ;;
esac
 
 
exit $SMF_EXIT_OK
 
 

So you have two files: |collectd| script and |collectd.xml| manifest.
What do you do with these files?

First – before you begin – make sure that collectd is not running, close
it down. My script above assumes that you are using the default place
for PID file. Second: remove / move away collectd's |/etc/rcN.d| and
|/etc/init.d| stuff, you won't need it from now on, because collectd
will be SMF-ized. Tada!

Next – install the script in place. It took me a minute or two to figure
out why Solaris'es |install| tool does not work as expected. It turned
out that the switches and parameters must be in exactly same order as in
man page, especially the -c parameter must be first:

|# install -c /lib/svc/method/ -m 755 -u root -g bin collectd|

Now is the moment to test once again that the script is working OK. Try
running:

|# /lib/svc/method/collectd start
# /lib/svc/method/collectd stop
# /lib/svc/method/collectd restart
|

|pgrep| and |kill| are your friends here, also collectd logs. At last
stop the collectd service and continue.

Now is the time to /slurp/ attached XML manifest into the SMF database.
This is done using the |svccfg| tool. Transcript follows:

|# svccfg
svc:> validate collectd.xml
svc:> import collectd.xml
svc:>
|

It is good to run |validate| command first, especially if you copied and
pasted the XML manifest from this HTML document opened in your
browser!!! Second thing worth noting is that |svccfg| starts the service
immediately upon importing the manifest. It might be not what you want.
For example it will start collecting data on remote collectd server if
you use network plugin and it will do it under the hostname, that is not
right. So be sure to configure collectd prior to running it from SMF.

Now a few words about SMF tools. To see the state of all services issue
|svcs -a| command. To see state of collectd service issue |svcs
collectd| command. Quite normal states are enabled and disabled. If you
see maintenance state then something is wrong. Be sure that you stopped
all non-SMF collectd processes before you follow the procedure described
here. To stop collectd the SMF way issue the |svcadm disable
collectd|command. To start collectd the SMF way issue the |svcadm enable
collectd|command. Be aware that setting it this way makes the change
persistent across OS reboots, if you want to enable / disable the
service only temporarily then add |-t| switch after the |enable| /
|disable| keywords.

And now is time for a grand finale – seeing if SMF can take care of
collectd in case it crashes. See PID of collectd either using |pgrep| or
seeing the contents of the PID file and kill it using |kill|. Then check
with |svcs collectd| command that SMF has restarted collectd soon
afterwards. You should see that the service is once again enabled in the
first column, without your intervention.

Things that could or should be clarified:

    * How hard is it to correct mistakes in manifests? Does svccfg just
      overwrite entries for specified service FMRI or does it require to
      delete bad entry (and how to do it?!) and import the correct one?
    * How does SMF know that a service has crashed / terminated? I
      attended Sun's trainings and the trainer didn't know how to
      explain this, we formed a hypothesis that it watches new PIDs
      after starting a service or something like that. I think it is a
      bad hypothesis, because SMF can watch PID for the startup script
      itself but I think not the processes launched inside the script. I
      have a slight idea that it is done based on so called contracts.

------------------------------------------------------------------------


        Komentarze do notki “SMF-izing collectd” <#comments>


        Zostaw odpowiedź

Nick

------------------------------------------------------------------------


    Archiwum

    * Grudzień 2008 (5) </2008/12/>
    * Październik 2008 (4) </2008/10/>
    * Wrzesień 2008 (7) </2008/09/>
    * Sierpień 2008 (5) </2008/08/>
    * Lipiec 2008 (12) </2008/07/>
    * Czerwiec 2008 (11) </2008/06/>
    * Maj 2008 (3) </2008/05/>
    * Kwiecień 2008 (10) </2008/04/>
    * Marzec 2008 (3) </2008/03/>
    * Luty 2008 (1) </2008/02/>
    * Styczeń 2008 (1) </2008/01/>
    * Listopad 2007 (4) </2007/11/>
    * Październik 2007 (6) </2007/10/>
    * Wrzesień 2007 (10) </2007/09/>
    * Sierpień 2007 (3) </2007/08/>
    * Lipiec 2007 (8) </2007/07/>
    * Czerwiec 2007 (10) </2007/06/>
    * Maj 2007 (12) </2007/05/>
    * Kwiecień 2007 (17) </2007/04/>


    Kategorie

    * Film (8) <http://phosowicz.jogger.pl/kategoria/film/>
    * Książki (35) <http://phosowicz.jogger.pl/kategoria/ksiazki/>
    * Muzyka (15) <http://phosowicz.jogger.pl/kategoria/muzyka/>
    * Ogólne (20) <http://phosowicz.jogger.pl/kategoria/ogolne/>
    * Polityka (59) <http://phosowicz.jogger.pl/kategoria/polityka/>
    * Sprzedam (5) <http://phosowicz.jogger.pl/kategoria/sprzedam/>
    * Techblog (20) <http://phosowicz.jogger.pl/kategoria/techblog/>
    * Technikalia (34) <http://phosowicz.jogger.pl/kategoria/technikalia/>
    * Wystawy (3) <http://phosowicz.jogger.pl/kategoria/wystawy/>


    Czytuję

    * ArsTechnica.com <http://arstechnica.com/>
    * Fund. Orientacja <http://www.abcnet.com.pl/>
    * Techblog Jogger'a <http://techblog.pl/>
    * The Register <http://www.theregister.co.uk/>


    Inne blogi

    * Bloody.Users <http://bloody.users.jogger.pl/>
    * Dandys <http://dandys.jogger.pl/>
    * Derin <http://derin.jogger.pl>
    * Kefir87 <http://kefir87.jogger.pl/>
    * Klisu <http://klisu.jogger.pl/>
    * Kwantowe Krajobrazy <http://kwantowekrajobrazy.jogger.pl/>
    * Paczor <http://paczor.fubar.pl/>
    * Prestidigitator <http://prestidigitator.jogger.pl>
    * Remiq <http://remiq.jogger.pl>
    * Torero <http://torero.jogger.pl/>
    * Zdzichubg <http://zdzichubg.jogger.pl/>


    Inne moje strony

    * www.delphi.org.pl <http://www.delphi.org.pl>
    * www.hosowicz.com <http://www.hosowicz.com>


    Pajacyk.pl

    * Nakarm dzieci! <http://pajacyk.pl/>


    Meta

    * Panel administracyjny <https://login.jogger.pl/>


------------------------------------------------------------------------

phosowicz is powered by Jogger <http://jogger.pl> and K2
<http://binarybonsai.com/k2/> by Michael <http://binarybonsai.com> and
Chris <http://chrisjdavis.org>, ported by Patryk Zawadzki.
<http://patrys.jogger.pl/>
Notki w RSS <http://phosowicz.jogger.pl/rss/content/html/20>