updated build instructions

[rrdtool.git] / doc / rrdbuild.pod

diff --git a/doc/rrdbuild.pod b/doc/rrdbuild.pod
index 593b7e9..9ca238b 100644 (file)
--- a/doc/rrdbuild.pod
+++ b/doc/rrdbuild.pod
@@ -35,12 +35,12 @@ Once you have decided. Save the two locations into environment variables.
 Depending on the shell you are using, you can do either (bash,zsh):
 
  BUILD_DIR=/tmp/rrdbuild
 Depending on the shell you are using, you can do either (bash,zsh):
 
  BUILD_DIR=/tmp/rrdbuild

- INSTALL_DIR=/usr/local/rrdtool-1.2.22
+ INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300

 
 Or if you run tcsh:
 
  set BUILD_DIR=/tmp/rrdbuild
 
 Or if you run tcsh:
 
  set BUILD_DIR=/tmp/rrdbuild

- set INSTALL_DIR=/usr/local/rrdtool-1.2.22
+ set INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300

 
 If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
 a different directory!
 
 If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
 a different directory!


@@ -55,9 +55,9 @@ pre-installed. Note that these instructions assume that your copies of
 B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
 could be that they are installed as B<gtar> and B<gmake> on your system.
 
 B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
 could be that they are installed as B<gtar> and B<gmake> on your system.
 

- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.22.tar.gz
- tar zxf rrdtool-1.2.22.tar.gz
- cd rrdtool-1.2.22
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
+ tar zxf rrdtool-1.2.99907080300.tar.gz
+ cd rrdtool-1.2.99907080300

  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with
  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with


@@ -101,13 +101,24 @@ If you have an other compile you have to use the following settings:
 
 =over 
 
 
 =over 
 

+Some libraries want to know where other libraries are. For this to work,
+set the following environamen variable
+
+ export PKG_CONFIG_PATH=${INSTALLDIR}/lib/pkgconfig
+ 
+or in tcsh
+
+ setenv PKG_CONFIG_PATH ${INSTALLDIR}/lib/pkgconfig
+

 =item Building zlib
 
 =item Building zlib
 

+Chances are very high that you already have that on your system ... 
+

  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
  tar  zxf zlib-1.2.3.tar.gz
  cd zlib-1.2.3
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
  tar  zxf zlib-1.2.3.tar.gz
  cd zlib-1.2.3

- env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR

  make
  make install
 
  make
  make install
 


@@ -119,22 +130,21 @@ drop the settings of LDFLAGS and CPPFLAGS. Note that the backslash (\) at
 the end of line 4 means that line 4 and line 5 are on one line.
 
  cd $BUILD_DIR
 the end of line 4 means that line 4 and line 5 are on one line.
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.10.tar.gz
- tar zxvf libpng-1.2.10.tar.gz
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ tar zxvf libpng-1.2.18.tar.gz

  cd libpng-1.2.10
  cd libpng-1.2.10

- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
-     ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR

  make
  make install
 
 =item Building freetype
 
  cd $BUILD_DIR
  make
  make install
 
 =item Building freetype
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.1.10.tar.bz2
- tar jxvf freetype-2.1.10.tar.bz2
- cd freetype-2.1.10
- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
-     ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ tar zxvf freetype-2.3.5.tar.gz
+ cd freetype-2.3.5
+ env CFLAGS="-O3 -fPIC" \
+     ./configure --prefix=$INSTALL_DIR

  make
  make install
 
  make
  make install
 


@@ -143,40 +153,70 @@ add the following at the end of the configure line:
 
  GNUMAKE=gmake EGREP=egrep
 
 
  GNUMAKE=gmake EGREP=egrep
 

-=item Building libart_lgpl
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.

 
  cd $BUILD_DIR
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ tar zxvf fontconfig-2.4.2.tar.gz  
+ cd fontconfig-2.4.2
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR

  make
  make install
 
  make
  make install
 

-=back
+=item Building Cairo
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ tar zxvf cairo-1.4.10.tar.gz  
+ cd cairo-1.4.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR \
+    --enable-xlib=no \
+    --enable-xlib-render=no \
+    --enable-win32=no
+ make
+ make install

 
 

-Now all the dependent libraries are built and you can try again. Since these
-are static libraries, you may have to use F<ranlib> to make them accessible.
-Especially BSD systems like Mac OS X may require this, Linux and Solaris
-will do just fine without since their F<ar> command does ranlibs job as well.
+=item Building Glib

 
 

- ranlib $BUILD_DIR/lb/lib/*.a
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ tar zxvf glib-2.12.13.tar.gz 
+ cd glib-2.12.13
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Pango
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
+ tar zxvf pango-1.17.5.tar.gz 
+ cd pango-1.17.5
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=back

 
 

-This time you tell configure where it should be looking for libraries and
-include files. This is done via environment variables. Depending on the
-shell you are running, the syntax for setting environment variables is
-different. Under csh/tcsh you use:
+Now all the dependent libraries are built and you can try again. This time
+you tell configure where it should be looking for libraries and include
+files. This is done via environment variables. Depending on the shell you
+are running, the syntax for setting environment variables is different.
+Under csh/tcsh you use:

 
 

- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS  -L$BUILD_DIR/lb/lib
+ setenv CPPFLAGS -I$INSTALL_DIR/include
+ setenv LDFLAGS "-L$INSTALL_DIR/lib -R$INSTALL_DIR/lib"

  setenv CFLAGS -O3
 
 If you are running bash/sh/ash/ksh/zsh use this:
 
  setenv CFLAGS -O3
 
 If you are running bash/sh/ash/ksh/zsh use this:
 

- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
+ CPPFLAGS=-I$INSTALL_DIR/include
+ LDFLAGS="-R$INSTALL_DIR/lib -L$INSTALL_DIR/lib"

  CFLAGS=-O3
  export CPPFLAGS LDFLAGS CFLAGS
 
  CFLAGS=-O3
  export CPPFLAGS LDFLAGS CFLAGS
 


@@ -185,19 +225,19 @@ because it seems that a fair number of people have ill configured python and
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 

- cd $BUILD_DIR/rrdtool-1.2.22
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
+ cd $BUILD_DIR/rrdtool-1.2.99907080300
+ ./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python

  make clean
  make
  make install
 
 SOLARIS HINT: if you want to build  the perl module for the native perl (the
  make clean
  make
  make install
 
 SOLARIS HINT: if you want to build  the perl module for the native perl (the

-one shipping with solaris) you will need the sun forte compiler
-installed on your box or you have to hand-tune bindings/perl-shared/Makefile
-while building!
+one shipping with solaris) you will need the sun forte compiler installed on
+your box or you have to hand-tune bindings/perl-shared/Makefile while
+building!

 
 

-Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if your
-build has been successful.
+Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if
+your build has been successful.

 
 =head1 AUTHOR
 
 
 =head1 AUTHOR