added STDEV aggregation function for VDEF. -- Patrick J Cherry patrick bytemark.co.uk

[rrdtool.git] / doc / rrdbuild.pod

diff --git a/doc/rrdbuild.pod b/doc/rrdbuild.pod
index 245d028..f8437a9 100644 (file)
--- a/doc/rrdbuild.pod
+++ b/doc/rrdbuild.pod
@@ -35,12 +35,15 @@ Once you have decided. Save the two locations into environment variables.
 Depending on the shell you are using, you can do either (bash,zsh):
 
  BUILD_DIR=/tmp/rrdbuild
 Depending on the shell you are using, you can do either (bash,zsh):
 
  BUILD_DIR=/tmp/rrdbuild

- INSTALL_DIR=/usr/local/rrdtool-1.2.12
+ INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300

 
 Or if you run tcsh:
 
  set BUILD_DIR=/tmp/rrdbuild
 
 Or if you run tcsh:
 
  set BUILD_DIR=/tmp/rrdbuild

- set INSTALL_DIR=/usr/local/rrdtool-1.2.12
+ set INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
+
+If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
+a different directory!

 
 Now make sure the BUILD_DIR exists and go there:
 
 
 Now make sure the BUILD_DIR exists and go there:
 


@@ -52,9 +55,9 @@ pre-installed. Note that these instructions assume that your copies of
 B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
 could be that they are installed as B<gtar> and B<gmake> on your system.
 
 B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
 could be that they are installed as B<gtar> and B<gmake> on your system.
 

- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.12.tar.gz
- tar zxf rrdtool-1.2.12.tar.gz
- cd rrdtool-1.2.12
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
+ tar zxf rrdtool-1.2.99907080300.tar.gz
+ cd rrdtool-1.2.99907080300

  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with
  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with


@@ -65,16 +68,47 @@ package for each library you install. Once you have the missing bits on
 board, just re-run the last line of the instructions above.
 
 But again this may have been too optimistic, and you actually have to
 board, just re-run the last line of the instructions above.
 
 But again this may have been too optimistic, and you actually have to

-compile your own copies of the required libraries. Here is how:
+compile your own copies of the required libraries.
+
+=head3 Build Tipps for AIX
+
+If you are woking with AIX, you may find the the B<--disable-shared> option
+will cause things to break for you. In that case you may have to install the
+shared libraries into the rrdtool PREFIX and work with B<--disable-static>
+instead.
+
+Another hint to get rrdtool working on AIX is to use the IBM XL C Compiler:
+
+ export CC=/usr/vac/bin/cc
+ export PERLCC=$CC
+
+(Better instructions for AIX welcome!)
+
+=head2 Building Libraries
+
+In order to build the libraries you need a compiler on your system.
+Unfortunately compilers are not all alike. This has an effect on the CFLAGS
+you want to set. The examples below are for the popular GCC compiler suite.
+If you have an other compile you have to use the following settings:

 
 =over
 
 
 =over
 

+=item Sun Forte
+
+ CFLAGS="-xO3 -kPIC"
+
+=back
+
+=over 
+

 =item Building zlib
 
 =item Building zlib
 

+Chances are very high that you already have that on your system ... 
+

  cd $BUILD_DIR
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.2.tar.gz
- tar  zxf zlib-1.2.2.tar.gz
- cd zlib-1.2.2
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
+ tar  zxf zlib-1.2.3.tar.gz
+ cd zlib-1.2.3

  env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
  make
  make install
  env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
  make
  make install


@@ -87,9 +121,9 @@ drop the settings of LDFLAGS and CPPFLAGS. Note that the backslash (\) at
 the end of line 4 means that line 4 and line 5 are on one line.
 
  cd $BUILD_DIR
 the end of line 4 means that line 4 and line 5 are on one line.
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.8-config.tar.gz
- tar zxvf libpng-1.2.8-config.tar.gz
- cd libpng-1.2.8-config
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ tar zxvf libpng-1.2.18.tar.gz
+ cd libpng-1.2.10

  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
  make
  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
  make


@@ -98,9 +132,9 @@ the end of line 4 means that line 4 and line 5 are on one line.
 =item Building freetype
 
  cd $BUILD_DIR
 =item Building freetype
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.1.9.tar.gz
- tar zxvf freetype-2.1.9.tar.gz
- cd freetype-2.1.9
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ tar zxvf freetype-2.3.5.tar.gz
+ cd freetype-2.3.5

  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
  make
  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
  make


@@ -111,13 +145,51 @@ add the following at the end of the configure line:
 
  GNUMAKE=gmake EGREP=egrep
 
 
  GNUMAKE=gmake EGREP=egrep
 

-=item Building libart_lgpl
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ tar zxvf fontconfig-2.4.2.tar.gz  
+ cd fontconfig-2.4.2
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Cairo
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ tar zxvf cairo-1.4.10.tar.gz  
+ cd cairo-1.4.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR \
+    --enable-xlib=no \
+    --enable-xlib-render=no \
+    --enable-win32=no
+ make
+ make install
+
+=item Building Glib
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ tar zxvf glib-2.12.13.tar.gz 
+ cd glib-2.12.13
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Pango

 
  cd $BUILD_DIR
 
  cd $BUILD_DIR

- wget http://oss.oetiker.ch/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
+ tar zxvf pango-1.17.5.tar.gz 
+ cd pango-1.17.5
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR

  make
  make install
 
  make
  make install
 


@@ -135,16 +207,16 @@ include files. This is done via environment variables. Depending on the
 shell you are running, the syntax for setting environment variables is
 different. Under csh/tcsh you use:
 
 shell you are running, the syntax for setting environment variables is
 different. Under csh/tcsh you use:
 

- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS  -L$BUILD_DIR/lb/lib
+ set IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ setenv CPPFLAGS "$IR"
+ setenv LDFLAGS -L$BUILD_DIR/lb/lib

  setenv CFLAGS -O3
 
 If you are running bash/sh/ash/ksh/zsh use this:
 
  setenv CFLAGS -O3
 
 If you are running bash/sh/ash/ksh/zsh use this:
 

- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
+ IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ CPPFLAGS="$IR"
+ LDFLAGS="-L$BUILD_DIR/lb/lib -R$INSTALL_DIR/lib -L$INSTALL_DIR/lib"

  CFLAGS=-O3
  export CPPFLAGS LDFLAGS CFLAGS
 
  CFLAGS=-O3
  export CPPFLAGS LDFLAGS CFLAGS
 


@@ -153,8 +225,8 @@ because it seems that a fair number of people have ill configured python and
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 

- cd $BUILD_DIR/rrdtool-1.2.12
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
+ cd $BUILD_DIR/rrdtool-1.2.99907080300
+ ./configure --prefix=$INSTALL_DIR --disable-tcl

  make clean
  make
  make install
  make clean
  make
  make install


@@ -169,5 +241,5 @@ build has been successful.
 
 =head1 AUTHOR
 
 
 =head1 AUTHOR
 

-Tobias Oetiker E<lt>oetiker@ee.ethz.chE<gt>
+Tobias Oetiker E<lt>tobi@oetiker.chE<gt>