X-Git-Url: https://git.octo.it/?a=blobdiff_plain;f=doc%2Frrdbuild.pod;h=f8437a960e6a3a692cd4a6a7bcd6f65370e36e1a;hb=c1f4d92a5b64793471b6a4ca78ec7fa71db18df9;hp=f7412321b1e73ce764a400663968b13cae92bc2b;hpb=a9e69acbc184063dcc0eda6a250ee1b7ae1cbb47;p=rrdtool.git

diff --git a/doc/rrdbuild.pod b/doc/rrdbuild.pod
index f741232..f8437a9 100644
--- a/doc/rrdbuild.pod
+++ b/doc/rrdbuild.pod
@@ -35,12 +35,15 @@ Once you have decided. Save the two locations into environment variables.
 Depending on the shell you are using, you can do either (bash,zsh):
 
  BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.2.13
+ INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
 
 Or if you run tcsh:
 
  set BUILD_DIR=/tmp/rrdbuild
- set INSTALL_DIR=/usr/local/rrdtool-1.2.13
+ set INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
+
+If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
+a different directory!
 
 Now make sure the BUILD_DIR exists and go there:
 
@@ -52,9 +55,9 @@ pre-installed. Note that these instructions assume that your copies of
 B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
 could be that they are installed as B<gtar> and B<gmake> on your system.
 
- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.13.tar.gz
- tar zxf rrdtool-1.2.13.tar.gz
- cd rrdtool-1.2.13
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
+ tar zxf rrdtool-1.2.99907080300.tar.gz
+ cd rrdtool-1.2.99907080300
  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with
@@ -65,16 +68,47 @@ package for each library you install. Once you have the missing bits on
 board, just re-run the last line of the instructions above.
 
 But again this may have been too optimistic, and you actually have to
-compile your own copies of the required libraries. Here is how:
+compile your own copies of the required libraries.
+
+=head3 Build Tipps for AIX
+
+If you are woking with AIX, you may find the the B<--disable-shared> option
+will cause things to break for you. In that case you may have to install the
+shared libraries into the rrdtool PREFIX and work with B<--disable-static>
+instead.
+
+Another hint to get rrdtool working on AIX is to use the IBM XL C Compiler:
+
+ export CC=/usr/vac/bin/cc
+ export PERLCC=$CC
+
+(Better instructions for AIX welcome!)
+
+=head2 Building Libraries
+
+In order to build the libraries you need a compiler on your system.
+Unfortunately compilers are not all alike. This has an effect on the CFLAGS
+you want to set. The examples below are for the popular GCC compiler suite.
+If you have an other compile you have to use the following settings:
 
 =over
 
+=item Sun Forte
+
+ CFLAGS="-xO3 -kPIC"
+
+=back
+
+=over 
+
 =item Building zlib
 
+Chances are very high that you already have that on your system ... 
+
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
  tar  zxf zlib-1.2.3.tar.gz
- cd zlib-1.2.2
+ cd zlib-1.2.3
  env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
  make
  make install
@@ -87,8 +121,8 @@ drop the settings of LDFLAGS and CPPFLAGS. Note that the backslash (\) at
 the end of line 4 means that line 4 and line 5 are on one line.
 
  cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.8-config.tar.gz
- tar zxvf libpng-1.2.10.tar.gz
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ tar zxvf libpng-1.2.18.tar.gz
  cd libpng-1.2.10
  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
@@ -98,9 +132,9 @@ the end of line 4 means that line 4 and line 5 are on one line.
 =item Building freetype
 
  cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.1.10.tar.bz2
- tar jxvf freetype-2.1.10.tar.bz2
- cd freetype-2.1.10
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ tar zxvf freetype-2.3.5.tar.gz
+ cd freetype-2.3.5
  env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
      ./configure --disable-shared --prefix=$BUILD_DIR/lb
  make
@@ -111,13 +145,51 @@ add the following at the end of the configure line:
 
  GNUMAKE=gmake EGREP=egrep
 
-=item Building libart_lgpl
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ tar zxvf fontconfig-2.4.2.tar.gz  
+ cd fontconfig-2.4.2
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Cairo
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ tar zxvf cairo-1.4.10.tar.gz  
+ cd cairo-1.4.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR \
+    --enable-xlib=no \
+    --enable-xlib-render=no \
+    --enable-win32=no
+ make
+ make install
+
+=item Building Glib
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ tar zxvf glib-2.12.13.tar.gz 
+ cd glib-2.12.13
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Pango
 
  cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
+ tar zxvf pango-1.17.5.tar.gz 
+ cd pango-1.17.5
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
  make
  make install
 
@@ -135,16 +207,16 @@ include files. This is done via environment variables. Depending on the
 shell you are running, the syntax for setting environment variables is
 different. Under csh/tcsh you use:
 
- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS  -L$BUILD_DIR/lb/lib
+ set IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ setenv CPPFLAGS "$IR"
+ setenv LDFLAGS -L$BUILD_DIR/lb/lib
  setenv CFLAGS -O3
 
 If you are running bash/sh/ash/ksh/zsh use this:
 
- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
+ IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ CPPFLAGS="$IR"
+ LDFLAGS="-L$BUILD_DIR/lb/lib -R$INSTALL_DIR/lib -L$INSTALL_DIR/lib"
  CFLAGS=-O3
  export CPPFLAGS LDFLAGS CFLAGS
 
@@ -153,8 +225,8 @@ because it seems that a fair number of people have ill configured python and
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 
- cd $BUILD_DIR/rrdtool-1.2.13
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
+ cd $BUILD_DIR/rrdtool-1.2.99907080300
+ ./configure --prefix=$INSTALL_DIR --disable-tcl
  make clean
  make
  make install