From: Junio C Hamano <junkio@cox.net>
Date: Fri, 10 Feb 2006 08:45:59 +0000 (-0800)
Subject: git-status -v
X-Git-Tag: v1.2.0~27
X-Git-Url: https://git.octo.it/?a=commitdiff_plain;h=cf7bb589af739563c90dc32b4901bea73aaaa9d0;p=git.git

git-status -v

This revamps the git-status command to take the same set of
parameters as git commit.  It gives a preview of what is being
committed with that command.  With -v flag, it shows the diff
output between the HEAD commit and the index that would be
committed if these flags were given to git-commit command.

git-commit also acquires -v flag (it used to mean "verify" but
that is the default anyway and there is --no-verify to turn it
off, so not much is lost), which uses the updated git-status -v
to seed the commit log buffer.  This is handy for writing a log
message while reviewing the changes one last time.

Now, git-commit and git-status are internally share the same
implementation.

Unlike previous git-commit change, this uses a temporary index
to prepare the index file that would become the real index file
after a successful commit, and moves it to the real index file
once the commit is actually made.  This makes it safer than the
previous scheme, which stashed away the original index file and
restored it after an aborted commit.

Signed-off-by: Junio C Hamano <junkio@cox.net>
---

diff --git a/Makefile b/Makefile
index 5c329346..f240e452 100644
--- a/Makefile
+++ b/Makefile
@@ -107,7 +107,7 @@ SCRIPT_SH = \
 	git-merge-one-file.sh git-parse-remote.sh \
 	git-prune.sh git-pull.sh git-push.sh git-rebase.sh \
 	git-repack.sh git-request-pull.sh git-reset.sh \
-	git-resolve.sh git-revert.sh git-sh-setup.sh git-status.sh \
+	git-resolve.sh git-revert.sh git-sh-setup.sh \
 	git-tag.sh git-verify-tag.sh git-whatchanged.sh \
 	git-applymbox.sh git-applypatch.sh git-am.sh \
 	git-merge.sh git-merge-stupid.sh git-merge-octopus.sh \
@@ -125,7 +125,7 @@ SCRIPT_PYTHON = \
 SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
 	  $(patsubst %.perl,%,$(SCRIPT_PERL)) \
 	  $(patsubst %.py,%,$(SCRIPT_PYTHON)) \
-	  git-cherry-pick git-show
+	  git-cherry-pick git-show git-status
 
 # The ones that do not have to link with lcrypto nor lz.
 SIMPLE_PROGRAMS = \
@@ -443,6 +443,9 @@ git-cherry-pick: git-revert
 git-show: git-whatchanged
 	cp $< $@
 
+git-status: git-commit
+	cp $< $@
+
 # These can record GIT_VERSION
 git$X git.spec \
 	$(patsubst %.sh,%,$(SCRIPT_SH)) \
diff --git a/git-commit.sh b/git-commit.sh
index 25389240..e6793bd6 100755
--- a/git-commit.sh
+++ b/git-commit.sh
@@ -3,13 +3,21 @@
 # Copyright (c) 2005 Linus Torvalds
 # Copyright (c) 2006 Junio C Hamano
 
-USAGE='[-a] [-i] [-s] [-v | --no-verify]  [-m <message> | -F <logfile> | (-C|-c) <commit>] [-e] [--author <author>] [<path>...]'
-
+USAGE='[-a] [-i] [-s] [-v] [--no-verify] [-m <message> | -F <logfile> | (-C|-c) <commit>] [-e] [--author <author>] [<path>...]'
 SUBDIRECTORY_OK=Yes
 . git-sh-setup
 
-git-rev-parse --verify HEAD >/dev/null 2>&1 ||
-initial_commit=t
+git-rev-parse --verify HEAD >/dev/null 2>&1 || initial_commit=t
+branch=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD)
+
+case "$0" in
+*status)
+	status_only=t
+	unmerged_ok_if_status=--unmerged ;;
+*commit)
+	status_only=
+	unmerged_ok_if_status= ;;
+esac
 
 refuse_partial () {
 	echo >&2 "$1"
@@ -17,23 +25,155 @@ refuse_partial () {
 	exit 1
 }
 
-SAVE_INDEX="$GIT_DIR/save-index$$"
+THIS_INDEX="$GIT_DIR/index"
+NEXT_INDEX="$GIT_DIR/next-index$$"
+rm -f "$NEXT_INDEX"
 save_index () {
-	cp "$GIT_DIR/index" "$SAVE_INDEX"
+	cp "$THIS_INDEX" "$NEXT_INDEX"
+}
+
+report () {
+  header="#
+# $1:
+#   ($2)
+#
+"
+  trailer=""
+  while read status name newname
+  do
+    printf '%s' "$header"
+    header=""
+    trailer="#
+"
+    case "$status" in
+    M ) echo "#	modified: $name";;
+    D*) echo "#	deleted:  $name";;
+    T ) echo "#	typechange: $name";;
+    C*) echo "#	copied: $name -> $newname";;
+    R*) echo "#	renamed: $name -> $newname";;
+    A*) echo "#	new file: $name";;
+    U ) echo "#	unmerged: $name";;
+    esac
+  done
+  printf '%s' "$trailer"
+  [ "$header" ]
 }
 
 run_status () {
-	(
-		cd "$TOP"
-		if test '' != "$TMP_INDEX"
+    (
+	# We always show status for the whole tree.
+	cd "$TOP"
+
+	# If TMP_INDEX is defined, that means we are doing
+	# "--only" partial commit, and that index file is used
+	# to build the tree for the commit.  Otherwise, if
+	# NEXT_INDEX exists, that is the index file used to
+	# make the commit.  Otherwise we are using as-is commit
+	# so the regular index file is what we use to compare.
+	if test '' != "$TMP_INDEX"
+	then
+	    GIT_INDEX_FILE="$TMP_INDEX"
+	    export GIT_INDEX_FILE
+	elif test -f "$NEXT_INDEX"
+	then
+	    GIT_INDEX_FILE="$NEXT_INDEX"
+	    export GIT_INDEX_FILE
+	fi
+
+	case "$branch" in
+	refs/heads/master) ;;
+	*)  echo "# On branch $branch" ;;
+	esac
+
+	if test -z "$initial_commit"
+	then
+	    if test -z "$verbose"
+	    then
+		git-diff-index -M --cached --name-status \
+		    --diff-filter=MDTCRA HEAD |
+		sed -e '
+			s/\\/\\\\/g
+			s/ /\\ /g
+		' |
+		report "Updated but not checked in" "will commit"
+	    else
+	        if git-diff-index --cached -M -p --diff-filter=MDTCRA HEAD |
+		   grep .
 		then
-			GIT_INDEX_FILE="$TMP_INDEX" git-status
+		   false
 		else
-			git-status
+		   true
 		fi
-	)
+	    fi
+	    committable="$?"
+	else
+	    echo '#
+# Initial commit
+#'
+	    git-ls-files |
+	    sed -e '
+		    s/\\/\\\\/g
+		    s/ /\\ /g
+		    s/^/A /
+	    ' |
+	    report "Updated but not checked in" "will commit"
+
+	    committable="$?"
+	fi
+
+	git-diff-files  --name-status |
+	sed -e '
+		s/\\/\\\\/g
+		s/ /\\ /g
+	' |
+	report "Changed but not updated" \
+	    "use git-update-index to mark for commit"
+
+	if test -f "$GIT_DIR/info/exclude"
+	then
+	    git-ls-files -z --others --directory \
+		--exclude-from="$GIT_DIR/info/exclude" \
+		--exclude-per-directory=.gitignore
+	else
+	    git-ls-files -z --others --directory \
+		--exclude-per-directory=.gitignore
+	fi |
+	perl -e '$/ = "\0";
+	    my $shown = 0;
+	    while (<>) {
+		chomp;
+		s|\\|\\\\|g;
+		s|\t|\\t|g;
+		s|\n|\\n|g;
+		s/^/#	/;
+		if (!$shown) {
+		    print "#\n# Untracked files:\n";
+		    print "#   (use \"git add\" to add to commit)\n";
+		    print "#\n";
+		    $shown = 1;
+		}
+		print "$_\n";
+	    }
+	'
+	case "$committable" in
+	0)
+	    echo "nothing to commit"
+	    exit 1
+	esac
+	exit 0
+    )
 }
 
+trap '
+	test -z "$TMP_INDEX" || {
+		test -f "$TMP_INDEX" && rm -f "$TMP_INDEX"
+	}
+	rm -f "$NEXT_INDEX"
+' 0
+
+################################################################
+# Command line argument parsing and sanity checking
+
 all=
 also=
 only=
@@ -43,6 +183,7 @@ no_edit=
 log_given=
 log_message=
 verify=t
+verbose=
 signoff=
 force_author=
 while case "$#" in 0) break;; esac
@@ -172,9 +313,9 @@ do
       signoff=t
       shift
       ;;
-  -v|--v|--ve|--ver|--veri|--verif|--verify)
-      verify=t
-     shift
+  -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
+      verbose=t
+      shift
       ;;
   --)
       shift
@@ -189,6 +330,9 @@ do
   esac
 done
 
+################################################################
+# Sanity check options
+
 case "$log_given" in
 tt*)
   die "Only one of -c/-C/-F/-m can be used." ;;
@@ -207,9 +351,24 @@ case "$#,$also$only" in
   # Later when switch the defaults, we will replace them with these:
   # echo >&2 "assuming --only paths..."
   # also=
+
+  # If we are going to launch an editor, the message won't be
+  # shown without this...
+  test -z "$log_given$status_only" && sleep 1
   ;;
 esac
 unset only
+case "$all,$also,$#" in
+t,t,*)
+	die "Cannot use -a and -i at the same time." ;;
+t,,[1-9]*)
+	die "Paths with -a does not make sense." ;;
+,t,0)
+	die "No paths with -i does not make sense." ;;
+esac
+
+################################################################
+# Prepare index to have a tree to be committed
 
 TOP=`git-rev-parse --show-cdup`
 if test -z "$TOP"
@@ -218,29 +377,25 @@ then
 fi
 
 case "$all,$also" in
-t,t)
-	die "Cannot use -a and -i at the same time." ;;
 t,)
-	case "$#" in
-	0) ;;
-	*) die "Paths with -a does not make sense." ;;
-	esac
-
 	save_index &&
 	(
 		cd "$TOP"
+		GIT_INDEX_FILE="$NEXT_INDEX"
+		export GIT_INDEX_FILE
 		git-diff-files --name-only -z |
 		git-update-index --remove -z --stdin
 	)
 	;;
 ,t)
-	case "$#" in
-	0) die "No paths with -i does not make sense." ;;
-	esac
-
 	save_index &&
 	git-diff-files --name-only -z -- "$@"  |
-	(cd "$TOP" && git-update-index --remove -z --stdin)
+	(
+		cd "$TOP"
+		GIT_INDEX_FILE="$NEXT_INDEX"
+		export GIT_INDEX_FILE
+		git-update-index --remove -z --stdin
+	)
 	;;
 ,)
 	case "$#" in
@@ -262,43 +417,68 @@ t,)
 		refuse_partial "Different in index and the last commit:
 $dirty_in_index"
 	    fi
-	    commit_only=`git-ls-files -- "$@"` ;;
+	    commit_only=`git-ls-files -- "$@"`
+
+	    # Build the temporary index and update the real index
+	    # the same way.
+	    if test -z "$initial_commit"
+	    then
+		cp "$THIS_INDEX" "$TMP_INDEX"
+		GIT_INDEX_FILE="$TMP_INDEX" git-read-tree -m HEAD
+	    else
+		    rm -f "$TMP_INDEX"
+	    fi || exit
+
+	    echo "$commit_only" |
+	    GIT_INDEX_FILE="$TMP_INDEX" \
+	    git-update-index --add --remove --stdin &&
+
+	    save_index &&
+	    echo "$commit_only" |
+	    (
+		GIT_INDEX_FILE="$NEXT_INDEX"
+		export GIT_INDEX_FILE
+		git-update-index --remove --stdin
+	    ) || exit
+	    ;;
 	esac
 	;;
 esac
 
-git-update-index -q --refresh || exit 1
-
-trap '
-	test -z "$TMP_INDEX" || {
-		test -f "$TMP_INDEX" && rm -f "$TMP_INDEX"
-	}
-	test -f "$SAVE_INDEX" && mv -f "$SAVE_INDEX" "$GIT_DIR/index"
-' 0
+################################################################
+# If we do as-is commit, the index file will be THIS_INDEX,
+# otherwise NEXT_INDEX after we make this commit.  We leave
+# the index as is if we abort.
 
-if test "$TMP_INDEX"
+if test -f "$NEXT_INDEX"
 then
-	if test -z "$initial_commit"
-	then
-		GIT_INDEX_FILE="$TMP_INDEX" git-read-tree HEAD
-	else
-		rm -f "$TMP_INDEX"
-	fi || exit
-	echo "$commit_only" |
-	GIT_INDEX_FILE="$TMP_INDEX" git-update-index --add --remove --stdin &&
-	save_index &&
-	echo "$commit_only" |
-	git-update-index --remove --stdin ||
-	exit
+	USE_INDEX="$NEXT_INDEX"
+else
+	USE_INDEX="$THIS_INDEX"
 fi
 
+GIT_INDEX_FILE="$USE_INDEX" \
+    git-update-index -q $unmerged_ok_if_status --refresh || exit
+
+################################################################
+# If the request is status, just show it and exit.
+
+case "$0" in
+*status)
+	run_status
+	exit $?
+esac
+
+################################################################
+# Grab commit message, write out tree and make commit.
+
 if test t = "$verify" && test -x "$GIT_DIR"/hooks/pre-commit
 then
 	if test "$TMP_INDEX"
 	then
 		GIT_INDEX_FILE="$TMP_INDEX" "$GIT_DIR"/hooks/pre-commit
 	else
-		"$GIT_DIR"/hooks/pre-commit
+		GIT_INDEX_FILE="$USE_INDEX" "$GIT_DIR"/hooks/pre-commit
 	fi || exit
 fi
 
@@ -398,8 +578,10 @@ else
 	PARENTS=""
 fi
 
-
-run_status >>"$GIT_DIR"/COMMIT_EDITMSG
+{
+    test -z "$verbose" || echo '---'
+    run_status
+} >>"$GIT_DIR"/COMMIT_EDITMSG
 if [ "$?" != "0" -a ! -f "$GIT_DIR/MERGE_HEAD" ]
 then
 	rm -f "$GIT_DIR/COMMIT_EDITMSG"
@@ -429,8 +611,14 @@ t)
 	fi
 esac
 
-grep -v '^#' < "$GIT_DIR"/COMMIT_EDITMSG |
-git-stripspace > "$GIT_DIR"/COMMIT_MSG
+sed -e '
+	/^---$/{
+		s///
+		q
+	}
+	/^#/d
+' "$GIT_DIR"/COMMIT_EDITMSG |
+git-stripspace >"$GIT_DIR"/COMMIT_MSG
 
 if cnt=`grep -v -i '^Signed-off-by' "$GIT_DIR"/COMMIT_MSG |
 	git-stripspace |
@@ -439,14 +627,20 @@ if cnt=`grep -v -i '^Signed-off-by' "$GIT_DIR"/COMMIT_MSG |
 then
 	if test -z "$TMP_INDEX"
 	then
-		tree=$(git-write-tree)
+		tree=$(GIT_INDEX_FILE="$USE_INDEX" git-write-tree)
 	else
 		tree=$(GIT_INDEX_FILE="$TMP_INDEX" git-write-tree) &&
 		rm -f "$TMP_INDEX"
 	fi &&
 	commit=$(cat "$GIT_DIR"/COMMIT_MSG | git-commit-tree $tree $PARENTS) &&
 	git-update-ref HEAD $commit $current &&
-	rm -f -- "$GIT_DIR/MERGE_HEAD"
+	rm -f -- "$GIT_DIR/MERGE_HEAD" &&
+	if test -f "$NEXT_INDEX"
+	then
+		mv "$NEXT_INDEX" "$THIS_INDEX"
+	else
+		: ;# happy
+	fi
 else
 	echo >&2 "* no commit message?  aborting commit."
 	false
@@ -459,8 +653,4 @@ if test -x "$GIT_DIR"/hooks/post-commit && test "$ret" = 0
 then
 	"$GIT_DIR"/hooks/post-commit
 fi
-if test 0 -eq "$ret"
-then
-	rm -f "$SAVE_INDEX"
-fi
 exit "$ret"
diff --git a/git-status.sh b/git-status.sh
deleted file mode 100755
index 10d781c9..00000000
--- a/git-status.sh
+++ /dev/null
@@ -1,115 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2005 Linus Torvalds
-#
-
-USAGE=''
-SUBDIRECTORY_OK='Yes'
-
-. git-sh-setup
-
-if [ "$#" != "0" ]
-then
-  usage
-fi
-
-report () {
-  header="#
-# $1:
-#   ($2)
-#
-"
-  trailer=""
-  while read status name newname
-  do
-    printf '%s' "$header"
-    header=""
-    trailer="#
-"
-    case "$status" in
-    M ) echo "#	modified: $name";;
-    D*) echo "#	deleted:  $name";;
-    T ) echo "#	typechange: $name";;
-    C*) echo "#	copied: $name -> $newname";;
-    R*) echo "#	renamed: $name -> $newname";;
-    A*) echo "#	new file: $name";;
-    U ) echo "#	unmerged: $name";;
-    esac
-  done
-  printf '%s' "$trailer"
-  [ "$header" ]
-}
-
-branch=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD)
-case "$branch" in
-refs/heads/master) ;;
-*)	echo "# On branch $branch" ;;
-esac
-
-git-update-index -q --unmerged --refresh || exit
-
-if GIT_DIR="$GIT_DIR" git-rev-parse --verify HEAD >/dev/null 2>&1
-then
-	git-diff-index -M --cached --name-status --diff-filter=MDTCRA HEAD |
-	sed -e '
-		s/\\/\\\\/g
-		s/ /\\ /g
-	' |
-	report "Updated but not checked in" "will commit"
-
-	committable="$?"
-else
-	echo '#
-# Initial commit
-#'
-	git-ls-files |
-	sed -e '
-		s/\\/\\\\/g
-		s/ /\\ /g
-		s/^/A /
-	' |
-	report "Updated but not checked in" "will commit"
-
-	committable="$?"
-fi
-
-git-diff-files  --name-status |
-sed -e '
-	s/\\/\\\\/g
-	s/ /\\ /g
-' |
-report "Changed but not updated" "use git-update-index to mark for commit"
-
-
-if test -f "$GIT_DIR/info/exclude"
-then
-    git-ls-files -z --others --directory \
-	--exclude-from="$GIT_DIR/info/exclude" \
-        --exclude-per-directory=.gitignore
-else
-    git-ls-files -z --others --directory \
-        --exclude-per-directory=.gitignore
-fi |
-perl -e '$/ = "\0";
-	my $shown = 0;
-	while (<>) {
-		chomp;
-		s|\\|\\\\|g;
-		s|\t|\\t|g;
-		s|\n|\\n|g;
-		s/^/#	/;
-		if (!$shown) {
-			print "#\n# Untracked files:\n";
-			print "#   (use \"git add\" to add to commit)\n#\n";
-			$shown = 1;
-		}
-		print "$_\n";
-	}
-'
-
-case "$committable" in
-0)
-	echo "nothing to commit"
-	exit 1
-esac
-exit 0