git.git
18 years agoMerge branch 'jc/status'
Junio C Hamano [Fri, 10 Feb 2006 08:55:34 +0000 (00:55 -0800)]
Merge branch 'jc/status'

* jc/status:
  git-status -v

18 years agogit-status -v
Junio C Hamano [Fri, 10 Feb 2006 08:45:59 +0000 (00:45 -0800)]
git-status -v

This revamps the git-status command to take the same set of
parameters as git commit.  It gives a preview of what is being
committed with that command.  With -v flag, it shows the diff
output between the HEAD commit and the index that would be
committed if these flags were given to git-commit command.

git-commit also acquires -v flag (it used to mean "verify" but
that is the default anyway and there is --no-verify to turn it
off, so not much is lost), which uses the updated git-status -v
to seed the commit log buffer.  This is handy for writing a log
message while reviewing the changes one last time.

Now, git-commit and git-status are internally share the same
implementation.

Unlike previous git-commit change, this uses a temporary index
to prepare the index file that would become the real index file
after a successful commit, and moves it to the real index file
once the commit is actually made.  This makes it safer than the
previous scheme, which stashed away the original index file and
restored it after an aborted commit.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'master'
Junio C Hamano [Fri, 10 Feb 2006 06:19:21 +0000 (22:19 -0800)]
Merge branch 'master'

* master:
  Merge branch 'jc/ls-files-o'
  count-delta.c: Match the delta data semantics change in version 3.
  remove delta-against-self bit
  stat() for existence in safe_create_leading_directories()
  call git_config() after setup_git_directory()
  Add --diff-filter= documentation paragraph

18 years agoMerge branch 'jc/ls-files-o'
Junio C Hamano [Fri, 10 Feb 2006 06:19:07 +0000 (22:19 -0800)]
Merge branch 'jc/ls-files-o'

* jc/ls-files-o:
  ls-files: honour per-directory ignore file from higher directories.

18 years agoMerge branch 'lt/diff-tree'
Junio C Hamano [Fri, 10 Feb 2006 05:10:52 +0000 (21:10 -0800)]
Merge branch 'lt/diff-tree'

* lt/diff-tree:
  combine-diff: move formatting logic to show_combined_diff()
  combined-diff: use diffcore before intersecting paths.
  diff-tree -c raw output

18 years agocount-delta.c: Match the delta data semantics change in version 3.
Junio C Hamano [Fri, 10 Feb 2006 01:15:59 +0000 (17:15 -0800)]
count-delta.c: Match the delta data semantics change in version 3.

This matches the count_delta() logic to the change previous
commit introduces to patch_delta().

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoremove delta-against-self bit
Nicolas Pitre [Thu, 9 Feb 2006 22:50:04 +0000 (17:50 -0500)]
remove delta-against-self bit

After experimenting with code to add the ability to encode a delta
against part of the deltified file, it turns out that resulting packs
are _bigger_ than when this ability is not used.  The raw delta output
might be smaller, but it doesn't compress as well using gzip with a
negative net saving on average.

Said bit would in fact be more useful to allow for encoding the copying
of chunks larger than 64KB providing more savings with large files.
This will correspond to packs version 3.

While the current code still produces packs version 2, it is made future
proof so pack versions 2 and 3 are accepted.  Any pack version 2 are
compatible with version 3 since the redefined bit was never used before.
When enough time has passed, code to use that bit to produce version 3
packs could be added.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agostat() for existence in safe_create_leading_directories()
Jason Riedy [Fri, 10 Feb 2006 01:56:13 +0000 (17:56 -0800)]
stat() for existence in safe_create_leading_directories()

Use stat() to explicitly check for existence rather than
relying on the non-portable EEXIST error in sha1_file.c's
safe_create_leading_directories().  There certainly are
optimizations possible, but then the code becomes almost
the same as that in coreutil's lib/mkdir-p.c.

Other uses of EEXIST seem ok.  Tested on Solaris 8, AIX 5.2L,
and a few Linux versions.  AIX has some unrelated (I think)
failures right now; I haven't tried many recent gits there.
Anyone have an old Ultrix box to break everything?  ;)

Also remove extraneous #includes.  Everything's already in
git-compat-util.h, included through cache.h.

Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: move formatting logic to show_combined_diff()
Junio C Hamano [Thu, 9 Feb 2006 23:23:06 +0000 (15:23 -0800)]
combine-diff: move formatting logic to show_combined_diff()

This way, diff-files can make use of it.  Also implement the
full suite of what diff_flush_raw() supports just for
consistency.  With this, 'diff-tree -c -r --name-status' would
show what is expected.

There is no way to get the historical output (useful for
debugging and low-level Plumbing work) anymore, so tentatively
it makes '-m' to mean "do not combine and show individual diffs
with parents".

diff-files matches diff-tree to produce raw output for -c.  For
textual combined diff, use -p -c.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocall git_config() after setup_git_directory()
Junio C Hamano [Thu, 9 Feb 2006 22:41:39 +0000 (14:41 -0800)]
call git_config() after setup_git_directory()

If you call setup_git_directory() to work from a subdirectory,
that should be run first before running git_config().  Otherwise
you would not read the configuration file from the correct place.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombined-diff: use diffcore before intersecting paths.
Junio C Hamano [Thu, 9 Feb 2006 22:35:19 +0000 (14:35 -0800)]
combined-diff: use diffcore before intersecting paths.

This is needed to make "diff-tree -c -M" to work semi-sensibly.
Otherwise rename detection, pickaxe and friends would never be
invoked.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd --diff-filter= documentation paragraph
Jon Loeliger [Thu, 9 Feb 2006 15:12:11 +0000 (09:12 -0600)]
Add --diff-filter= documentation paragraph

Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodiff-tree -c raw output
Linus Torvalds [Thu, 9 Feb 2006 18:30:28 +0000 (10:30 -0800)]
diff-tree -c raw output

NOTE! This makes "-c" be the default, which effectively means that merges
are never ignored any more, and "-m" is a no-op. So it changes semantics.

I would also like to make "--cc" the default if you do patches, but didn't
actually do that.

The raw output format is not wonderfully pretty, but it's distinguishable
from a "normal patch" in that a normal patch with just one parent has just
one colon at the beginning, while a multi-parent raw diff has <n> colons
for <n> parents.

So now, in the kernel, when you do

git-diff-tree cce0cac125623f9b68f25dd1350f6d616220a8dd

(to see the manual ARM merge that had a conflict in arch/arm/Kconfig), you
get

cce0cac125623f9b68f25dd1350f6d616220a8dd
::100644 100644 100644 4a63a8e2e45247a11c068c6ed66c6e7aba29ddd9 77eee38762d69d3de95ae45dd9278df9b8225e2c 2f61726d2f4b636f6e66696700dbf71a59dad287       arch/arm/Kconfig

ie you see two colons (two parents), then three modes (parent modes
followed by result mode), then three sha1s (parent sha1s followed by
result sha1).

Which is pretty close to the normal raw diff output.

Cool/stupid exercise:

$ git-whatchanged | grep '^::' | cut -f2- | sort |
  uniq -c | sort -n | less -S

will show which files have needed the most file-level merge conflict
resolution. Useful? Probably not. But kind of interesting.

For the kernel, it's

     ....
     10 arch/ia64/Kconfig
     11 drivers/scsi/Kconfig
     12 drivers/net/Makefile
     17 include/linux/libata.h
     18 include/linux/pci_ids.h
     23 drivers/net/Kconfig
     24 drivers/scsi/libata-scsi.c
     28 drivers/scsi/libata-core.c
     43 MAINTAINERS

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/nostat'
Junio C Hamano [Thu, 9 Feb 2006 08:55:45 +0000 (00:55 -0800)]
Merge branch 'jc/nostat'

* jc/nostat:
  "Assume unchanged" git: --really-refresh fix.

18 years ago"Assume unchanged" git: --really-refresh fix.
Junio C Hamano [Thu, 9 Feb 2006 08:55:17 +0000 (00:55 -0800)]
"Assume unchanged" git: --really-refresh fix.

The earlier round failed to make --really-refresh to mark
up-to-date index entry to valid again due to a trivial thinko.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/ls-files-o'
Junio C Hamano [Thu, 9 Feb 2006 08:21:27 +0000 (00:21 -0800)]
Merge branch 'jc/ls-files-o'

* jc/ls-files-o:
  ls-files: honour per-directory ignore file from higher directories.

18 years agols-files: honour per-directory ignore file from higher directories.
Junio C Hamano [Thu, 9 Feb 2006 08:08:31 +0000 (00:08 -0800)]
ls-files: honour per-directory ignore file from higher directories.

When git-ls-files -o --exclude-per-directory=.gitignore is run
from a subdirectory, it did not read from .gitignore from its
parent directory.  Reading from them makes output from these two
commands consistent:

    $ git ls-files -o --exclude-per-directory=.gitignore Documentation
    $ cd Documentation &&
      git ls-files -o --exclude-per-directory=.gitignore

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branches 'jc/nostat' and 'jc/empty-commit'
Junio C Hamano [Thu, 9 Feb 2006 05:56:05 +0000 (21:56 -0800)]
Merge branches 'jc/nostat' and 'jc/empty-commit'

* jc/nostat:
  ls-files: debugging aid for CE_VALID changes.
  "Assume unchanged" git: do not set CE_VALID with --refresh
  "Assume unchanged" git

* jc/empty-commit:
  t6000: fix a careless test library add-on.
  Do not allow empty name or email.

18 years agot6000: fix a careless test library add-on.
Junio C Hamano [Tue, 7 Feb 2006 23:35:46 +0000 (15:35 -0800)]
t6000: fix a careless test library add-on.

It tried to "restore" GIT_AUTHOR_EMAIL environment variable but
the variable started out as unset, so ended up setting it to an
empty string.  This is now caught as an error.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDo not allow empty name or email.
Junio C Hamano [Tue, 7 Feb 2006 21:19:10 +0000 (13:19 -0800)]
Do not allow empty name or email.

Instead of silently allowing to create a bogus commit that lacks
information by mistake, complain loudly and die.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agols-files: debugging aid for CE_VALID changes.
Junio C Hamano [Thu, 9 Feb 2006 05:50:18 +0000 (21:50 -0800)]
ls-files: debugging aid for CE_VALID changes.

This is not really part of the proposed updates for CE_VALID,
but with this change, ls-files -t shows CE_VALID paths with
lowercase tag letters instead of the usual uppercase.  Useful
for checking out what is going on.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years ago"Assume unchanged" git: do not set CE_VALID with --refresh
Junio C Hamano [Thu, 9 Feb 2006 05:49:47 +0000 (21:49 -0800)]
"Assume unchanged" git: do not set CE_VALID with --refresh

When working with automatic assume-unchanged mode using
core.ignorestat, setting CE_VALID after --refresh makes things
more cumbersome to use.  Consider this scenario:

 (1) the working tree is on a filesystem with slow lstat(2).
     The user sets core.ignorestat = true.

 (2) "git checkout" to switch to a different branch (or initial
     checkout) updates all paths and the index starts out with
     "all clean".

 (3) The user knows she wants to edit certain paths.  She uses
     update-index --no-assume-unchanged (we could call it --edit;
     the name is inmaterial) to mark these paths and starts
     editing.

 (4) After editing half of the paths marked to be edited, she
     runs "git status".  This runs "update-index --refresh" to
     reduce the false hits from diff-files.

 (5) Now the other half of the paths, since she has not changed
     them, are found to match the index, and CE_VALID is set on
     them again.

For this reason, this commit makes update-index --refresh not to
set CE_VALID even after the path without CE_VALID are verified
to be up to date.  The user still can run --really-refresh to
force lstat() to match the index entries to the reality.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years ago"Assume unchanged" git
Junio C Hamano [Thu, 9 Feb 2006 05:15:24 +0000 (21:15 -0800)]
"Assume unchanged" git

This adds "assume unchanged" logic, started by this message in the list
discussion recently:

<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>

This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of.  On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.

You can use two new options to update-index to set and reset the
CE_VALID bit:

git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...

These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file.  Nor they add a new
entry to the index.

When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:

 - update-index to explicitly register the current object name to the
   index file.

 - when update-index --refresh finds the path to be up-to-date.

 - when tools like read-tree -u and apply --index update the working
   tree file and register the current object name to the index file.

The flag is dropped upon read-tree that does not check out the index
entry.  This happens regardless of the core.ignorestat settings.

Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time.  However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:

 - while "git-read-tree -m" or git-apply need to make sure
   that the paths involved in the merge do not have local
   modifications.  This sacrifices performance for safety.

 - when git-checkout-index -f -q -u -a tries to see if it needs
   to checkout the paths.  Otherwise you can never check
   anything out ;-).

 - when git-update-index --really-refresh (a new flag) tries to
   see if the index entry is up to date.  You can start with
   everything marked as CE_VALID and run this once to drop
   CE_VALID bit for paths that are modified.

Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".

This version is not expected to be perfect.  I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.

But the basics seem to work, and ready to be tested by people
who asked for this feature.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years ago.gitignore git-rerere and config.mak
Andreas Ericsson [Tue, 7 Feb 2006 17:21:02 +0000 (18:21 +0100)]
.gitignore git-rerere and config.mak

Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix "git diff a..b" breakage
Linus Torvalds [Tue, 7 Feb 2006 18:26:41 +0000 (10:26 -0800)]
Fix "git diff a..b" breakage

The "--cc" implies "-p", but without the recursive part.

Linus

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoBasic documentation for git-show
Petr Baudis [Tue, 7 Feb 2006 11:47:47 +0000 (12:47 +0100)]
Basic documentation for git-show

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocument git-diff-tree --always
Petr Baudis [Tue, 7 Feb 2006 11:47:44 +0000 (12:47 +0100)]
Document git-diff-tree --always

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp-fetch: Abort requests for objects which arrived in packs
Mark Wooding [Tue, 7 Feb 2006 10:07:39 +0000 (10:07 +0000)]
http-fetch: Abort requests for objects which arrived in packs

In fetch_object, there's a call to release an object request if the
object mysteriously arrived, say in a pack.  Unfortunately, the fetch
attempt for this object might already be in progress, and we'll leak the
descriptor.  Instead, try to tidy away the request.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoformat-patch: Remove last vestiges of --mbox option
Andreas Ericsson [Tue, 7 Feb 2006 09:37:54 +0000 (09:37 +0000)]
format-patch: Remove last vestiges of --mbox option

Don't mention it in docs or --help output.
Remove mbox, date and author variables from git-format-patch.sh.

Use DESCRIPTION text from man-page to update LONG_USAGE output. It's
a bit silly to have two texts saying the same thing in different words,
and I'm too lazy to update both.

Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge git://git.kernel.org/pub/scm/gitk/gitk
Junio C Hamano [Tue, 7 Feb 2006 09:19:49 +0000 (01:19 -0800)]
Merge git://git.kernel.org/pub/scm/gitk/gitk

* git://git.kernel.org/pub/scm/gitk/gitk:
  gitk: Use git-diff-tree --cc for showing the diffs for merges
  gitk: Add braces around if expressions

18 years agogit-commit: finishing touches.
Junio C Hamano [Mon, 6 Feb 2006 00:08:01 +0000 (16:08 -0800)]
git-commit: finishing touches.

Introduce --only flag to allow the new "partial commit"
semantics when paths are specified.  The default is still the
traditional --include semantics.  Once peoples' fingers and
scripts that want the traditional behaviour are updated to
explicitly say --include, we could change it to either default
to --only, or refuse to operate without either --only/--include
when paths are specified.

This also fixes a couple of bugs in the previous round.  Namely:

 - forgot to save/restore index in some cases.

 - forgot to use the temporary index to show status when '--only
   paths...' semantics was used.

 - --author did not take precedence when reusing an existing
   commit.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-commit: revamp the git-commit semantics.
Junio C Hamano [Sun, 5 Feb 2006 08:07:44 +0000 (00:07 -0800)]
git-commit: revamp the git-commit semantics.

 - "git commit" without _any_ parameter keeps the traditional
   behaviour.  It commits the current index.

   We commit the whole index even when this form is run from a
   subdirectory.

 - "git commit --include paths..." (or "git commit -i paths...")
   is equivalent to:

    git update-index --remove paths...
        git commit

 - "git commit paths..." acquires a new semantics.  This is an
   incompatible change that needs user training, which I am
   still a bit reluctant to swallow, but enough people seem to
   have complained that it is confusing to them.  It

   1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
      trained git users that the traditional semantics now needs
      -i flag.

   2. refuses to run if named paths... are different in HEAD and
      the index (ditto about reminding).  Added paths are OK.

   3. reads HEAD commit into a temporary index file.

   4. updates named paths... from the working tree in this
      temporary index.

   5. does the same updates of the paths... from the working
      tree to the real index.

   6. makes a commit using the temporary index that has the
      current HEAD as the parent, and updates the HEAD with this
      new commit.

 - "git commit --all" can run from a subdirectory, but it updates
   the index with all the modified files and does a whole tree
   commit.

 - In all cases, when the command decides not to create a new
   commit, the index is left as it was before the command is
   run.  This means that the two "git diff" in the following
   sequence:

       $ git diff
       $ git commit -a
       $ git diff

   would show the same diff if you abort the commit process by
   making the commit log message empty.

This commit also introduces much requested --author option.

$ git commit --author 'A U Thor <author@example.com>'

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-rerere: reuse recorded resolve.
Junio C Hamano [Sun, 29 Jan 2006 07:15:24 +0000 (23:15 -0800)]
git-rerere: reuse recorded resolve.

In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).

This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agofmt-merge-msg: show summary of what is merged.
Junio C Hamano [Sat, 4 Feb 2006 03:20:16 +0000 (19:20 -0800)]
fmt-merge-msg: show summary of what is merged.

In addition to the branch names, populate the log message with
one-line description from actual commits that are being merged.

This was prompted by Len's 12-way octopus.  You need to have
'merge.summary' in the configuration file to enable it:

$ git repo-config merge.summary yes

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoread-tree --aggressive
Junio C Hamano [Sat, 4 Feb 2006 06:04:14 +0000 (22:04 -0800)]
read-tree --aggressive

A new flag --aggressive resolves what we traditionally resolved
with external git-merge-one-file inside index while read-tree
3-way merge works.

git-merge-octopus and git-merge-resolve use this flag before
running git-merge-index with git-merge-one-file.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years ago[PATCH] mailinfo: reset CTE after each multipart
Junio C Hamano [Tue, 7 Feb 2006 05:35:25 +0000 (21:35 -0800)]
[PATCH] mailinfo: reset CTE after each multipart

If the first part uses quoted-printable to protect iso8859-1
name in the commit log, and the second part was plain ascii text
patchfile without even Content-Transfer-Encoding subheader, we
incorrectly tried to decode the patch as quoted printable.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocs: minor git-push copyediting
J. Bruce Fields [Mon, 6 Feb 2006 00:42:27 +0000 (19:42 -0500)]
Docs: minor git-push copyediting

Minor git-push copyediting

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocs: move git url and remotes text to separate sections
J. Bruce Fields [Sun, 5 Feb 2006 23:29:49 +0000 (18:29 -0500)]
Docs: move git url and remotes text to separate sections

The sections on git urls and remotes files in the git-fetch,
git-pull, and git-push manpages seem long enough to be worth a
manpage section of their own.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocs: split up pull-fetch-param.txt
J. Bruce Fields [Sun, 5 Feb 2006 22:43:47 +0000 (17:43 -0500)]
Docs: split up pull-fetch-param.txt

The push and pull man pages include a bunch of shared text from
pull-fetch-param.txt.  This simplifies maintenance somewhat, but
there's actually quite a bit of text that applies only to one or the
other.

So, separate out the push- and pull/fetch-specific text into
pull-fetch-param.txt and git-push.txt, then include the largest chunk
of common stuff (the description of protocols and url's) from
urls.txt.  That cuts some irrelevant stuff from the man pages without
making us duplicate too much.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: do not punt on removed or added files.
Junio C Hamano [Tue, 7 Feb 2006 02:54:08 +0000 (18:54 -0800)]
combine-diff: do not punt on removed or added files.

When we remove a file, the parents' contents are all removed so
it is not that interesting to show all of them, but the fact it
was removed when all parents had it *is* unusual.  When we add a
file, similarly the fact it was added when no parent wanted it
*is* unusual, and in addition the result matters, so show it.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitk: Use git-diff-tree --cc for showing the diffs for merges
Paul Mackerras [Mon, 6 Feb 2006 22:13:52 +0000 (09:13 +1100)]
gitk: Use git-diff-tree --cc for showing the diffs for merges

This replaces a lot of code that used the result from several 2-way
diffs to generate a combined diff for a merge.  Now we just use
git-diff-tree --cc and colorize the output a bit, which is a lot
simpler, and has the enormous advantage that if the diff doesn't
show quite what someone thinks it should show, I can deflect the
blame to someone else. :)

Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years agogitk: Add braces around if expressions
Paul Mackerras [Mon, 6 Feb 2006 22:10:18 +0000 (09:10 +1100)]
gitk: Add braces around if expressions

Apparently this simplifies things for the parser/compiler and makes
it go slightly faster (since without the braces, it potentially has
to do two levels of substitutions rather than one).

Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years agocombine-diff: show mode changes as well.
Junio C Hamano [Mon, 6 Feb 2006 20:53:07 +0000 (12:53 -0800)]
combine-diff: show mode changes as well.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: do not send NULL to printf
Junio C Hamano [Mon, 6 Feb 2006 20:30:00 +0000 (12:30 -0800)]
combine-diff: do not send NULL to printf

When we run combined diff from working tree (diff-files --cc),
we sent NULL to printf that is returned by find_unique_abbrev().

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocore-tutorial: adjust to recent reality.
Junio C Hamano [Mon, 6 Feb 2006 20:27:33 +0000 (12:27 -0800)]
core-tutorial: adjust to recent reality.

We still talked about HEAD symlinks but these days we use
symrefs by default.

Also 'failed/prevented' message is now gone from the merge
output.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-diff: do not fall back on --cc when -[123], --ours etc. are given.
Junio C Hamano [Mon, 6 Feb 2006 19:17:56 +0000 (11:17 -0800)]
git-diff: do not fall back on --cc when -[123], --ours etc. are given.

These flags ask diff with a specific unmerged stage, so it
should fall back on -p instead.  Also when -c is given, we
should not do --cc.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/diff'
Junio C Hamano [Mon, 6 Feb 2006 07:55:45 +0000 (23:55 -0800)]
Merge branch 'jc/diff'

* jc/diff:
  git-diff-tree --stdin: show all parents.
  combine-diff: remove misguided --show-empty hack.

18 years agoMerge branches 'lt/show' and 'lt/revlist'
Junio C Hamano [Mon, 6 Feb 2006 07:55:09 +0000 (23:55 -0800)]
Merge branches 'lt/show' and 'lt/revlist'

* lt/show:
  git-show

* lt/revlist:
  rev-parse lstat() workaround cleanup.

18 years agoMerge branches 'jc/daemon' and 'mw/http'
Junio C Hamano [Mon, 6 Feb 2006 07:54:14 +0000 (23:54 -0800)]
Merge branches 'jc/daemon' and 'mw/http'

* jc/daemon:
  daemon: extend user-relative path notation.
  daemon: Set SO_REUSEADDR on listening sockets.
  daemon: do not forbid user relative paths unconditionally under --base-path

* mw/http:
  http-fetch: Tidy control flow in process_alternate_response
  http: Turn on verbose Curl messages if GIT_CURL_VERBOSE set in environment
  http-fetch: Fix message reporting rename of object file.
  http-fetch: Fix object list corruption in fill_active_slots().

18 years agogit-diff-tree --stdin: show all parents.
Junio C Hamano [Mon, 6 Feb 2006 07:00:41 +0000 (23:00 -0800)]
git-diff-tree --stdin: show all parents.

git-diff-tree --stdin ignored second and subsequent parents when
fed git-rev-list --parents output.  Update diff_tree_commit()
function to take a commit object, and pass a fabricated commit
object after grafting the fake parents from diff_tree_stdin().

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: remove misguided --show-empty hack.
Junio C Hamano [Mon, 6 Feb 2006 06:25:00 +0000 (22:25 -0800)]
combine-diff: remove misguided --show-empty hack.

Now --always flag is available in diff-tree, there is no reason
to have that hack in the diffcore side.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agorev-parse lstat() workaround cleanup.
Linus Torvalds [Mon, 6 Feb 2006 05:41:47 +0000 (21:41 -0800)]
rev-parse lstat() workaround cleanup.

Earlier we had a workaround to avoid misspelled revision name to
be taken as a filename when "--no-revs --no-flags" are in
effect.  This cleans up the logic.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-send-email: Fully implement --quiet and document it.
Ryan Anderson [Mon, 6 Feb 2006 01:13:52 +0000 (20:13 -0500)]
git-send-email: Fully implement --quiet and document it.

Also reorganizes the man page to list options alphabetically.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodaemon: extend user-relative path notation.
Junio C Hamano [Sun, 5 Feb 2006 06:27:29 +0000 (22:27 -0800)]
daemon: extend user-relative path notation.

Earlier, we made --base-path to automatically forbid
user-relative paths, which was probably a mistake.  This
introduces --user-path (or --user-path=path) option to control
the use of user-relative paths independently.  The latter form
of the option can be used to restrict accesses to a part of each
user's home directory, similar to "public_html" some webservers
supports.

If we're invoked with --user-path=FOO option, then a URL of the
form git://~USER/PATH/... resolves to the path HOME/FOO/PATH/...,
where HOME is USER's home directory.

[jc: This is much reworked by me so bugs are mine, but the
 original patch was done by Mark Wooding.]

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodaemon: Set SO_REUSEADDR on listening sockets.
Mark Wooding [Fri, 3 Feb 2006 20:27:04 +0000 (20:27 +0000)]
daemon: Set SO_REUSEADDR on listening sockets.

Without this, you can silently lose the ability to receive IPv4
connections if you stop and restart the daemon.

[jc: tweaked code organization a bit and made this controllable
 from a command line option.]

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodaemon: do not forbid user relative paths unconditionally under --base-path
Junio C Hamano [Sat, 4 Feb 2006 07:50:55 +0000 (23:50 -0800)]
daemon: do not forbid user relative paths unconditionally under --base-path

Using base-path to relocate the server public space does not
have anything to do with allowing or forbidding user relative
paths.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp-fetch: Tidy control flow in process_alternate_response
Mark Wooding [Wed, 1 Feb 2006 11:44:39 +0000 (11:44 +0000)]
http-fetch: Tidy control flow in process_alternate_response

It's a bit convoluted.  Tidy it up.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp: Turn on verbose Curl messages if GIT_CURL_VERBOSE set in environment
Mark Wooding [Wed, 1 Feb 2006 11:44:37 +0000 (11:44 +0000)]
http: Turn on verbose Curl messages if GIT_CURL_VERBOSE set in environment

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp-fetch: Fix message reporting rename of object file.
Mark Wooding [Wed, 1 Feb 2006 11:44:35 +0000 (11:44 +0000)]
http-fetch: Fix message reporting rename of object file.

move_temp_to_file returns 0 or -1.  This is not a good thing to pass to
strerror(3).  Fortunately, someone already reported the error, so don't
worry too much.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp-fetch: Fix object list corruption in fill_active_slots().
Mark Wooding [Wed, 1 Feb 2006 11:44:28 +0000 (11:44 +0000)]
http-fetch: Fix object list corruption in fill_active_slots().

In fill_active_slots() -- if we find an object which has already arrived,
say as part of a pack, /don't/ remove it from the list.  It's already been
prefetched and someone will ask for it later.  Just label it as done and
carry blithely on.  (As it was, the code would dereference a freed object
to continue through the list anyway.)

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-show
Junio C Hamano [Mon, 6 Feb 2006 00:42:49 +0000 (16:42 -0800)]
git-show

This is essentially 'git whatchanged -n1 --always --cc "$@"'.
Just like whatchanged takes default flags from
whatchanged.difftree configuration, this uses show.difftree
configuration.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-diff: use --cc instead of -p.
Junio C Hamano [Mon, 6 Feb 2006 00:37:18 +0000 (16:37 -0800)]
git-diff: use --cc instead of -p.

The --cc output is much nicer when dealing with merges, so use
it by default.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodiff-index: make --cc a synonym for -p for now.
Junio C Hamano [Mon, 6 Feb 2006 00:36:12 +0000 (16:36 -0800)]
diff-index: make --cc a synonym for -p for now.

It could be made later to show unmerged state nicer than the
default as we did for diff-files later, but this would suffice
for now.  We would like to make --cc the default for 'git diff'.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodiff-tree --always flag
Linus Torvalds [Sun, 5 Feb 2006 19:42:09 +0000 (11:42 -0800)]
diff-tree --always flag

It _might_ make sense for certain users like gitk and gitview if
we had a single tool that gives --pretty and its diff even if
the diff is empty.  Having said that, the flag --cc -m is too
specific.  If some uses want to see the commit log even for an
empty diff, that flag should not be something only --cc honors.

Here's an "--always" flag that does that.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoUse adler32() from zlib instead of defining our own.
Peter Eriksen [Sat, 4 Feb 2006 22:54:01 +0000 (23:54 +0100)]
Use adler32() from zlib instead of defining our own.

Since we already depend on zlib, we don't need to define our
own adler32().  Spotted by oprofile.

Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix git-rev-parse over-eager errors
Linus Torvalds [Sun, 5 Feb 2006 19:58:34 +0000 (11:58 -0800)]
Fix git-rev-parse over-eager errors

Using "--verify" together with "--no-flags" makes perfect sense, but
git-rev-parse would complain about it when it saw a flag, even though it
would never actually use/output that flag.

This fixes it.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDo not fall back on vi on dumb terminals.
Junio C Hamano [Sun, 5 Feb 2006 06:10:32 +0000 (22:10 -0800)]
Do not fall back on vi on dumb terminals.

When TERM is set to 'dumb', do not start vi to edit the commit log
message.

Suggested by Amos Waterland.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branches 'jc/sha1', 'jc/diff' and 'jc/ws'
Junio C Hamano [Sat, 4 Feb 2006 07:52:20 +0000 (23:52 -0800)]
Merge branches 'jc/sha1', 'jc/diff' and 'jc/ws'

* jc/sha1:
  get_sha1_1: allow octopus^12 to be properly parsed.

* jc/diff:
  combine-diff: finishing touches to git-diff-tree --cc

* jc/ws:
  whitespace cleanup.

18 years agoUse sha1_file.c's mkdir-like routine in apply.c.
Jason Riedy [Sat, 4 Feb 2006 06:50:57 +0000 (22:50 -0800)]
Use sha1_file.c's mkdir-like routine in apply.c.

As far as I can see, create_subdirectories() in apply.c just
duplicates the functionality of safe_create_leading_directories() from
sha1_file.c.  The former has a warm, fuzzy const parameter, but that's
not important.

The potential problem with EEXIST and creating directories should
never occur here, but will be removed by future
safe_create_leading_directories() changes.  Other uses of EEXIST in
apply.c should be fine barring intentionally malicious behavior.

Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodaemon: Provide missing argument for logerror() call.
Mark Wooding [Fri, 3 Feb 2006 20:27:02 +0000 (20:27 +0000)]
daemon: Provide missing argument for logerror() call.

Could cause a crash if --base-path set.  Unlikely to be a security the
concern: message doesn't go to the client, so we can't leak anything
(except by dumping core), and we've already forked, so it's not a denial
of service.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-merge: Properly quote $merge_msg variable.
Junio C Hamano [Sat, 4 Feb 2006 03:41:33 +0000 (19:41 -0800)]
git-merge: Properly quote $merge_msg variable.

Otherwise it would go though shell expansion...

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoget_sha1_1: allow octopus^12 to be properly parsed.
Junio C Hamano [Fri, 3 Feb 2006 07:48:36 +0000 (23:48 -0800)]
get_sha1_1: allow octopus^12 to be properly parsed.

We probably thought anybody who does more than 9 parents in an
Octopus is insane when this was initially done, but there is no
inherent reason to limit the number of independent topic
branches that happen to mature at the same time.

Our commit-tree allows up to 16 already, so at least we should
prepare to handle what we can produce, if only to be consistent.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agowhitespace cleanup.
Junio C Hamano [Wed, 1 Feb 2006 02:15:51 +0000 (18:15 -0800)]
whitespace cleanup.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: finishing touches to git-diff-tree --cc
Junio C Hamano [Fri, 3 Feb 2006 01:43:47 +0000 (17:43 -0800)]
combine-diff: finishing touches to git-diff-tree --cc

This updates the output format to make administrative lines more
consistent with the traditional diffs.

The "index" line shows blob object names from each parents
(separated by commas), double dots and the object name of the
resulting blob.

The hunk header line begins with N+1 '@' characters for N-way
diff, the line number L of the first line in the hunk and line
count C from the parent in "-L,C" format for each parents and
then the line number of the first line in the hunk and line
count from the resulting file in "+L,C" format, and finally
N+1 '@' characters (earlier versions had the line numbers from
the resulting file at the beginning).

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: cleanup.
Junio C Hamano [Thu, 2 Feb 2006 23:17:42 +0000 (15:17 -0800)]
combine-diff: cleanup.

The flag on the surviving lines meant "this parent is not
different" while the parent_map flag on the lost lines meant
"this parent is different", which was confusing.  So swap the
meaning of on-bit in the flag.  Also more heavily comment the
code.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: show parent line numbers as well.
Junio C Hamano [Tue, 31 Jan 2006 06:33:15 +0000 (22:33 -0800)]
combine-diff: show parent line numbers as well.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: add a bit more comments.
Junio C Hamano [Tue, 31 Jan 2006 00:34:29 +0000 (16:34 -0800)]
combine-diff: add a bit more comments.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-send-email: Add --quiet to reduce some of the chatter when sending emails.
Ryan Anderson [Thu, 2 Feb 2006 16:56:06 +0000 (11:56 -0500)]
git-send-email: Add --quiet to reduce some of the chatter when sending emails.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoProvide a more meaningful initial "From " line when using --compose in git-send-email.
Ryan Anderson [Thu, 2 Feb 2006 16:56:06 +0000 (11:56 -0500)]
Provide a more meaningful initial "From " line when using --compose in git-send-email.

git-send-email, when used with --compose, provided the user with a mbox-format
file to edit.  Some users, however, were confused by the leading, blank, "From
" line, so this change puts the value that will appear on the From: line of the
actual email on this line, along with a note that the line is ignored.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocommit.c: "Merge" fix in pretty_print_commit.
Junio C Hamano [Fri, 3 Feb 2006 01:52:19 +0000 (17:52 -0800)]
commit.c: "Merge" fix in pretty_print_commit.

Earlier, f2d4227530499db3e273ae84f30adfd4b70791c6 commit broke Merge:
lines for unabbreviated case.  Do not emit extra dots if we do not
abbreviate.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agomerge-recursive: Speed up commit graph construction
Fredrik Kuivinen [Thu, 2 Feb 2006 11:43:35 +0000 (12:43 +0100)]
merge-recursive: Speed up commit graph construction

Use __slots__ to speed up construction and decrease memory consumption
of the Commit objects.

Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agomerge-recursive: Make use of provided bases
Fredrik Kuivinen [Thu, 2 Feb 2006 11:43:20 +0000 (12:43 +0100)]
merge-recursive: Make use of provided bases

This makes some cases faster as we don't have to build the commit graph.

Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocumentation: git-diff-tree --cc also omits empty commits
Junio C Hamano [Thu, 2 Feb 2006 19:28:38 +0000 (11:28 -0800)]
Documentation: git-diff-tree --cc also omits empty commits

A misguided attempt to show logs at all time was inserted only to
the documentation of this flag.  Worse yet, it was not even implemented,
causing more confusion.  Drop it.

We might want to have an option to show --pretty even when there is no
diff output, but that is applicable to all forms of diff, not just --cc.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: fix placement of deletion.
Junio C Hamano [Thu, 2 Feb 2006 13:21:14 +0000 (05:21 -0800)]
combine-diff: fix placement of deletion.

The code misplaced a raw hunk that consists of solely deleted
lines by one line.  This showed e.g. Len's 12-way octopus
(9fdb62af in the linux-2.6), kernel/power/disk.c, hunk starting
at line 95, incorrectly.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: add safety check to --cc.
Junio C Hamano [Thu, 2 Feb 2006 09:28:08 +0000 (01:28 -0800)]
combine-diff: add safety check to --cc.

The earlier change implemented "only two version" check but
without checking if the change rewrites from all the parents.
This implements a check to make sure that a change introduced
by the merge from all the parents is caught to be interesting.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: update --cc "uninteresting hunks" logic.
Junio C Hamano [Thu, 2 Feb 2006 08:12:55 +0000 (00:12 -0800)]
combine-diff: update --cc "uninteresting hunks" logic.

Earlier logic was discarding hunks that has difference from only
one parent or the same difference from all but one parent.  This
changes it to check if the differences on all lines are from the
same sets of parents.  This discards more uninteresting hunks
and seems to match expectations more naturally.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agocombine-diff: reuse diff from the same blob.
Junio C Hamano [Thu, 2 Feb 2006 07:29:03 +0000 (23:29 -0800)]
combine-diff: reuse diff from the same blob.

When dealing with an insanely large Octopus, it is possible to
optimize by noticing that more than one parents have the same
blob and avoid running diff between a parent and the merge
result by reusing an earlier result.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAllow diff and index commands to be interrupted
Petr Baudis [Tue, 31 Jan 2006 23:40:33 +0000 (00:40 +0100)]
Allow diff and index commands to be interrupted

So far, e.g. git-update-index --refresh was basically uninterruptable
by ctrl-c, since it hooked the SIGINT handler, but that handler would
only unlink the lockfile but not actually quit. This makes it propagate
the signal to the default handler.

Note that I expected it to work without resetting the signal handler to
SIG_DFL, but without that it ended in an infinite loop of tgkill()s -
is my glibc violating SUS or what?

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agorev-list: omit duplicated parents.
Junio C Hamano [Sun, 29 Jan 2006 23:24:42 +0000 (15:24 -0800)]
rev-list: omit duplicated parents.

Showing the same parent more than once for a commit does not
make much sense downstream, so stop it.

This can happen with an incorrectly made merge commit that
merges the same parent twice, but can happen in an otherwise
sane development history while squishing the history by taking
into account only commits that touch specified paths.

For example,

$ git rev-list --max-count=1 --parents addafaf -- rev-list.c

would have to show this commit ancestry graph:

                  .---o---.
                 /         \
                .---*---o---.
               /    93b74bc  \
   ---*---o---o-----o---o-----o addafaf
      d8f6b34  \             /
                .---o---o---.
                 \         /
                  .---*---.
                      3815f42

where 5 independent development tracks, only two of which have
changes in the specified paths since they forked.  The last
change for the other three development tracks was done by the
same commit before they forked, and we were showing that three
times.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoupdate-index --index-info: allow stage 0 entries.
Junio C Hamano [Wed, 1 Feb 2006 02:03:37 +0000 (18:03 -0800)]
update-index --index-info: allow stage 0 entries.

Somehow we did not allow stuffing the index with stage 0 entries
through --index-info interface.  I do not think of a reason to
forbid it offhand.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-svnimport.perl: fix for 'arg list too long...'
Sasha Khapyorsky [Wed, 1 Feb 2006 15:53:31 +0000 (17:53 +0200)]
git-svnimport.perl: fix for 'arg list too long...'

This fixes 'arg list too long..' problem with git-ls-files.

Note that second arg list separation loop (with 'git-update-index') is
needed since git-ls-files arguments can be directories.

Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoUse local structs for HTTP slot callback data
Nick Hengeveld [Wed, 1 Feb 2006 02:00:37 +0000 (18:00 -0800)]
Use local structs for HTTP slot callback data

There's no need for these structures to be static, and it could potentially
cause problems down the road.

Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agorev-list: allow -<n> as shorthand for --max-count=<n>
Eric Wong [Mon, 30 Jan 2006 00:28:02 +0000 (16:28 -0800)]
rev-list: allow -<n> as shorthand for --max-count=<n>

This builds on top of the previous one.

Traditionally, head(1) and tail(1) allow their line limits to be
parsed this way.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agorev-list: allow -n<n> as shorthand for --max-count=<n>
Eric Wong [Mon, 30 Jan 2006 00:26:40 +0000 (16:26 -0800)]
rev-list: allow -n<n> as shorthand for --max-count=<n>

Both -n<n> and -n <n> are supported.  POSIX versions of head(1) and
tail(1) allow their line limits to be parsed this way.  I find
--max-count to be a commonly used option, and also similar in spirit to
head/tail, so I decided to make life easier on my worn out (and lazy :)
fingers with this patch.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake apply accept the -pNUM option like patch does.
Daniel Barkalow [Tue, 31 Jan 2006 05:36:24 +0000 (00:36 -0500)]
Make apply accept the -pNUM option like patch does.

This only applies to traditional diffs, not to git diffs.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix HTTP request result processing after slot reuse
Nick Hengeveld [Tue, 31 Jan 2006 19:06:55 +0000 (11:06 -0800)]
Fix HTTP request result processing after slot reuse

Add a way to store the results of an HTTP request when a slot finishes
so the results can be processed after the slot has been reused.

Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake git-tar-tree use the tree_desc abstractions
Linus Torvalds [Tue, 31 Jan 2006 22:13:40 +0000 (14:13 -0800)]
Make git-tar-tree use the tree_desc abstractions

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake the "struct tree_desc" operations available to others
Linus Torvalds [Tue, 31 Jan 2006 22:10:56 +0000 (14:10 -0800)]
Make the "struct tree_desc" operations available to others

We have operations to "extract" and "update" a "struct tree_desc", but we
only used them in tree-diff.c and they were static to that file.

But other tree traversal functions can use them to their advantage

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branches 'bf/doc' and 'db/tartree'
Junio C Hamano [Tue, 31 Jan 2006 06:41:00 +0000 (22:41 -0800)]
Merge branches 'bf/doc' and 'db/tartree'

18 years agodocumentation: cvs migration - typofix.
Junio C Hamano [Tue, 31 Jan 2006 05:01:25 +0000 (21:01 -0800)]
documentation: cvs migration - typofix.

Signed-off-by: Junio C Hamano <junkio@cox.net>