-RRDTOOL NEWS
-============
-
-#####################################
-Major Changes between 1.2.x and 1.3.x
--------------------------------------
-
-RRdtool dump / restore Incompatibilities
-----------------------------------------
-rrdtool dump 1.3 does emit completely legal xml. Basically this means that
-it contains an xml header and a DOCTYPE definition. Unfortunately this
-causes older versions of rrdtool restore to be unhappy.
-
-To restore a new dump with ann old rrdtool restore version, either remove
-the xml header and the doctype by hand (both on the first line of the dump)
-or use rrdtool dump --no-header.
-
-NEW File access methods (Bernhard Fischer)
--------------------
-* introduced file-accessor functions rrd_read/rrd_seek/rrd_write
-* implemented full mmap-based file access with madvise hints for improved
- scalability, much reduced memory-footprint and much less blocking on
- disk
-* implemented optional full file-descriptor access instead of FILE* access
-
-NEW Graphing (Tobi Oetiker)
---------
-* libart has been replaced by cairo/pango
-* pango markup is supported
-* full gridfitting
-* --graph-render-mode=mono for non antialiased graphing
-* --font-render-mode=mono for non antialiased fonts
-* fonts come through fontconfig, use the Pango fontnameing
- scheme -> 'Times 20' ... it is not possible to use
- truetype fonts directly anymore.
-* Tabs are position independent.
-* TRENDNAN filter that ignores NAN values while caculating the TREND data. (Timo Stripf)
-* --full-size-mode to specify the outer border of the image and not just of the graphing canvas (Matthew Chambers)
-* TEXTALIGN command to alter default text alignment behaviour
-* C API in-memory graphing with rrd_graph_v (Evan Miller)
-* draw dashed lines in graphs (Thomas Gutzler)
-* new interface graphv which returns inforamation using the rrd_info
- interface (Tobi Oetiker and Mark Plaksin)
-
-NEW Forecasting (Evan Miller)
------------
-* the new MHWPREDICT consolidation function uses a variation of the Holt-Winters
- method. It is a drop-in replacement for HWPREDICT, and is better suited for
- data whose seasonal variations grow or shrink in proportion to the average.
-
-* If you create an RRD with the new MHWPREDICT function, the resulting
- rrdfile will be version 0004 and can only be used in rrdtool 1.3.
-
-Rewrites
---------
-* rrd_restore now uses libxml for parsing which makes things much more
- tolerant towards xml variations. The old code could mostly just parse the
- xml as it was output by rrdtool dump. See also: 'incompatibilities' at the
- top of this document. (by Florian octo Forster)
-
-* rrd_update rewritten to make it more modular. Fixed two longstanding
- HW bugs in the process (Evan Miller)
-
-Internationalization (Takao Fujiwara and Tobi Oetiker)
---------------------
-* The help output by rrdtool has been internationalized. There are no real
- translations included with rrdtool yet, contributions are welcome.
-* The internationalization will only be compiled if libintl and friends are
- available on your system. Use the configure option --disable-libintl if
- you want to disable this feature
-
-Language Bindings
------------------
-* ruby rrd_fetch will return step as a last property -- Mike Perham
-
-* python rrdtool.info does now conform with the data structure returned
- by the other language bindings. This is incompatible with the
- previous (broken) version --tobi
-
-* python bindings got updatev support --tobi
-
-* ruby, perl, python bindings support the new graphv interface --tobi
-
-Locale Independent Numeric Input
---------------------------------
-* Regardles of locale you are in, rrdtool always expects input to be numbers
- (LC_NUMERIC) in C or POSIX locale for numbers. (not 1,1 but 1.1) this is
- necessary to make things like RPN work as it uses , as a separator.
-
-######################################################################################
-Major Changes between 1.0.x and 1.2.x
-======================================================================================
-Graphing
---------
-
-* rewritten graphics generation based on libart.
- - anti-aliased output
- - alpha transparency support
- - truetype fonts
-
-* additional graphics formats: EPS, PDF, SVG
-
-* extended multi-part documentation
-
-* VDEF support; define and use variables. Find, and use, the
- maximum rate seen by rrdtool; compute and show the average
-
-* Sliding window (trend) analysis
- Compute a smoother average, for instance over the last 6 CDPs
-
-* percentile (95th or other)
- Remove peaks, 95 percent of all rates are at or below the
- returned value
-
-Logging
--------
-* a second logging interface: rrdtool updatev
- Verbose updating of the database; show CPDs being created
-
-* Aberrant Behavior Detection with Holt-Winters Forecasting
- Compare current data with expected data, detect and log when
- the rates are outside expected levels
-
-* COMPUTE data type for artificial data-sources calculating their
- input using RPN math and data from the other data-sources.
-
-Incompatibilities
------------------
-* Colons in COMMENT arguments to rrdtool graph must be escaped with a backslash
-
-* the --alt-y-mrtg option is gone or rather since 1.2.7 it is back but
- without functionality.
-
-* In pipe mode, rrdtool answers with OK only if it was successful with the
- command. Otherwhise the answer will be ERROR...
-
-
-Behind the Scenes
------------------
-* In order to support Holt-Winters and Calculated Datasources,
- the rrdtool data format has changed. While the new version of rrdtool can
- read files created with rrdtool 1.0.x. It is not possible to read files
- created by rrdtool-1.2.x with rrdtool-1.0.x
-
-* External libraries are not included with rrdtool anymore. This is in line
- with todays trend of using shared libraries everywhere. With the exception
- of the cgi library most things required by rrdtool will be found on every recent
- system.
-
-* Memory Mapped IO support for faster logging.
+News for RRDtool 1.4
+====================
+$Id$
+
+RRD Caching Daemon (rrdcached)
+------------------------------
+by Florian Forster and Kevin Brintnall
+
+The RRD Caching Daemon can dramatically improve the 'update' performance
+of your system. Due to filehandling overheads, the time it takes todo one
+update is virtually the same as to doing two updates in a row.
+
+The Cache Daemon intercepts rrdtool update calls, assembling multiple
+updates before writing them to the actual rrd file. When calling rrdtool
+graph in such a setup, the command will tell the daemon to flush out all
+pending updates for the rrd files, required to draw the graph.
+
+
+RRD Dumping and Restoring (rrdtool dump/restore)
+------------------------------------------------
+by Tobi Oetiker
+
+The output of rrdtool dump has been adjusted to be simpler to parse by
+existing xml parsers.
+
+The restore core has been completely re-written yet again and is now relying
+on an incremental xml parser. This has the advantage that the memory
+consumtion while restoring xml files is only slighly larger than the
+resulting rrd file. Which is much less than the requirements of the 1.3.
+
+RRD Graphing functions (rrdtool graph)
+--------------------------------------
+by Martin Sperl
+
+* VDEF PERCENTNAN (a PRECENT that ignores NAN)
+
+* CDEF PREDICT and PREDICTSIGMA functions for on-the-fly
+ data prediction without the need to modify existing rrd files as it is
+ required for HoltWinters.
+
+* LibDBI integration provides a path to read data directly of a supported
+ SQL database into rrdtool graph.
+
+Miscellaneous Changes
+---------------------
+
+* graph legends can now be placed left, right or above the graph with the
+ new --legend-direction and --legend-positon placement options.
+ by Melchior Rabe
+
+* switched to using automake 1.11 which provides a 'silent' build process,
+ causing errors and warnings to stand out much more than before.
+ by Tobi Oetiker
+
+* switched from intltoolize to autopoint for the i18n configuration.
+ by Tobi Oetiker
+
+* lua bindings for rrdtool
+ by Fidelis Assis
+
+* various improvements to rrd_open functions and mmap handling
+ by Daniel Pocock
+
+* allow the HW smoothing window size to be set to 0 with rrdtool tune
+ by sylvain luiset
+
+for more detail see the CHANGES file.
projects / rrdtool.git / blobdiff