Depending on the shell you are using, you can do either (bash,zsh):
BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.2.12
+ INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
Or if you run tcsh:
set BUILD_DIR=/tmp/rrdbuild
- set INSTALL_DIR=/usr/local/rrdtool-1.2.12
+ set INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
+
+If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
+a different directory!
Now make sure the BUILD_DIR exists and go there:
cd $BUILD_DIR
Lets first assume you already have all the necessary libraries
-per-installed. Note that these instructions assume that your copies of
+pre-installed. Note that these instructions assume that your copies of
B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
could be that they are installed as B<gtar> and B<gmake> on your system.
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/rrdtool-1.2.12.tar.gz
- tar zxf rrdtool-1.2.12.tar.gz
- cd rrdtool-1.2.12
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
+ tar zxf rrdtool-1.2.99907080300.tar.gz
+ cd rrdtool-1.2.99907080300
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
board, just re-run the last line of the instructions above.
But again this may have been too optimistic, and you actually have to
-compile your own copies of the required libraries. Here is how:
+compile your own copies of the required libraries.
+
+=head3 Build Tipps for AIX
+
+If you are woking with AIX, you may find the the B<--disable-shared> option
+will cause things to break for you. In that case you may have to install the
+shared libraries into the rrdtool PREFIX and work with B<--disable-static>
+instead.
+
+Another hint to get rrdtool working on AIX is to use the IBM XL C Compiler:
+
+ export CC=/usr/vac/bin/cc
+ export PERLCC=$CC
+
+(Better instructions for AIX welcome!)
+
+=head2 Building Libraries
+
+In order to build the libraries you need a compiler on your system.
+Unfortunately compilers are not all alike. This has an effect on the CFLAGS
+you want to set. The examples below are for the popular GCC compiler suite.
+If you have an other compile you have to use the following settings:
=over
+=item Sun Forte
+
+ CFLAGS="-xO3 -kPIC"
+
+=back
+
+=over
+
+Some libraries want to know where other libraries are. For this to work,
+set the following environamen variable
+
+ export PKG_CONFIG_PATH=${INSTALLDIR}/lib/pkgconfig
+
+or in tcsh
+
+ setenv PKG_CONFIG_PATH ${INSTALLDIR}/lib/pkgconfig
+
=item Building zlib
+Chances are very high that you already have that on your system ...
+
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/zlib-1.2.2.tar.gz
- tar zxf zlib-1.2.2.tar.gz
- cd zlib-1.2.2
- env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
+ tar zxf zlib-1.2.3.tar.gz
+ cd zlib-1.2.3
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
make
make install
the end of line 4 means that line 4 and line 5 are on one line.
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/libpng-1.2.8-config.tar.gz
- tar zxvf libpng-1.2.8-config.tar.gz
- cd libpng-1.2.8-config
- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
- ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ tar zxvf libpng-1.2.18.tar.gz
+ cd libpng-1.2.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
make
make install
=item Building freetype
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/freetype-2.1.9.tar.gz
- tar zxvf freetype-2.1.9.tar.gz
- cd freetype-2.1.9
- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
- ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ tar zxvf freetype-2.3.5.tar.gz
+ cd freetype-2.3.5
+ env CFLAGS="-O3 -fPIC" \
+ ./configure --prefix=$INSTALL_DIR
make
make install
GNUMAKE=gmake EGREP=egrep
-=item Building libart_lgpl
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ tar zxvf fontconfig-2.4.2.tar.gz
+ cd fontconfig-2.4.2
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
make
make install
-=back
+=item Building Cairo
-Now all the dependent libraries are built and you can try again. Since these
-are static libraries, you may have to use F<ranlib> to make them accessible.
-Especially BSD systems like Mac OS X may require this, Linux and Solaris
-will do just fine without since their F<ar> command does ranlibs job as well.
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ tar zxvf cairo-1.4.10.tar.gz
+ cd cairo-1.4.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR \
+ --enable-xlib=no \
+ --enable-xlib-render=no \
+ --enable-win32=no
+ make
+ make install
- ranlib $BUILD_DIR/lb/lib/*.a
+=item Building Glib
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ tar zxvf glib-2.12.13.tar.gz
+ cd glib-2.12.13
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
-This time you tell configure where it should be looking for libraries and
-include files. This is done via environment variables. Depending on the
-shell you are running, the syntax for setting environment variables is
-different. Under csh/tcsh you use:
+=item Building Pango
- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS -L$BUILD_DIR/lb/lib
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
+ tar zxvf pango-1.17.5.tar.gz
+ cd pango-1.17.5
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=back
+
+Now all the dependent libraries are built and you can try again. This time
+you tell configure where it should be looking for libraries and include
+files. This is done via environment variables. Depending on the shell you
+are running, the syntax for setting environment variables is different.
+Under csh/tcsh you use:
+
+ setenv CPPFLAGS -I$INSTALL_DIR/include
+ setenv LDFLAGS "-L$INSTALL_DIR/lib -R$INSTALL_DIR/lib"
setenv CFLAGS -O3
If you are running bash/sh/ash/ksh/zsh use this:
- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
+ CPPFLAGS=-I$INSTALL_DIR/include
+ LDFLAGS="-R$INSTALL_DIR/lib -L$INSTALL_DIR/lib"
CFLAGS=-O3
export CPPFLAGS LDFLAGS CFLAGS
tcl setups that would prevent rrdtool from building if they are included in
their current state.
- cd $BUILD_DIR/rrdtool-1.2.12
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
+ cd $BUILD_DIR/rrdtool-1.2.99907080300
+ ./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
make clean
make
make install
-Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if your
-build has been successful.
+SOLARIS HINT: if you want to build the perl module for the native perl (the
+one shipping with solaris) you will need the sun forte compiler installed on
+your box or you have to hand-tune bindings/perl-shared/Makefile while
+building!
+
+Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if
+your build has been successful.
=head1 AUTHOR
-Tobias Oetiker E<lt>oetiker@ee.ethz.chE<gt>
+Tobias Oetiker E<lt>tobi@oetiker.chE<gt>
projects / rrdtool.git / blobdiff