rrdbuild - Instructions for building RRDtool
-=head1 DESCRIPTION
-
-=head2 Overview
+=head1 OVERVIEW
If you downloaded the source of rrdtool you have to compile it. This
document will give some information on how this is done.
tar> and B<GNU make> respectively. It could be that they are installed as
B<gtar> and B<gmake> on your system.
-=head2 Building
+=head1 OPTIMISTIC BUILD
Before you start to build RRDtool, you have to decide two things:
Once you have decided. Save the two locations into environment variables.
BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
+ INSTALL_DIR=/usr/local/rrdtool-1.3rc6
If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
Lets first assume you already have all the necessary libraries
pre-installed.
- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
- gunzip -c rrdtool-1.2.99907080300.tar.gz | tar xf -
- cd rrdtool-1.2.99907080300
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3rc6.tar.gz
+ gunzip -c rrdtool-1.3rc6.tar.gz | tar xf -
+ cd rrdtool-1.3rc6
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
-B<configure> complaining about several missing libraries. If you are on a
-Linux or *bsd system you may want to just install the missing bits from your
-software repository. When you do that, make sure you also get the B<-dev>
-package for each library you install. Once you have the missing bits on
-board, just re-run the last line of the instructions above.
+B<configure> complaining about several missing libraries.
+
+=head1 INSTALLING DEPENDENCIES
+
+If your OS lets you install additional packages from a software repository,
+you may get away with installing the missing packages. When the packages are
+installed, run configure again and try to compile again. Below you find some
+hints on getting your OS ready for the rrdtool compilation.
+
+Additions to this list are welcome.
+
+=head2 OpenSolaris 2008.05
+
+Just add a compiler and the gnome development package:
+
+ pkg install sunstudioexpress
+ pkg install SUNWgnome-common-devel
+
+There is a a problem with F<cairo.pc> on opensolaris. It suggests that
+xrender is required for compilation with cairo. This is not true and also
+bad since opensolaris does not include an F<xrender.pc> file. Use perl to
+fix this:
+
+ perl -i~ -p -e 's/(Requires.*?)\s*xrender.*/$1/' /usr/lib/pkgconfig/cairo.pc
-But again this may have been too optimistic, and you actually have to
+=head2 Debian / Ubuntu
+
+Use apt-get to make sure you have all that is required. A number
+of packages will get added through dependencies.
+
+ apt-get install libpango1.0-dev libxml2-dev
+
+=head1 BUILDING DEPENDENCIES
+
+But again this may have been too optimistic still, and you actually have to
compile your own copies of some of the required libraries. Things like
libpng and zlib are pretty standard so you will probably have them on your
system anyway. Freetype, Fontinst, Cairo, Pango may be installed, but it is
-possible that they are pretty old and thus don't live up to the
+possible that they are pretty old and thus don't live up to our
expectations, so you may want to compile their latest versions.
=head3 Build Tipps for AIX
In order to build the libraries you need a compiler on your system.
Unfortunately compilers are not all alike. This has an effect on the CFLAGS
you want to set. The examples below are for the popular GCC compiler suite.
-If you have an other compile you have to use the following settings:
+If you have an other compilers here are some ides:
=over
export PKG_CONFIG_PATH=${INSTALL_DIR}/lib/pkgconfig
export PATH=$INSTALL_DIR/bin:$PATH
-Since we are compiling libraries dynamically, you they must further know
+This relies on the presence of the F<pkgconfig> program. Below you find instructions
+on how to compile pkgconfig as well.
+
+Since we are compiling libraries dynamically, they must know
where to find each other. This is done by setting an appropriate LDFLAG.
-Unfortunatly the syntax differs from system to system:
+Unfortunatly, the syntax again differs from system to system:
=over
export MAKE=make
-
+=item Building pkgconfig
+
+As mentioned above, without pkgconfig the whole build process will be lots
+of pain and suffering, so make sure you have a copy on your system. If it is
+not available natively, here is how to compile it.
+
+ wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
+ gunzip -c pkg-config-0.23.tar.gz | tar xf -
+ cd pkg-config-0.23
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
=item Building zlib
Chances are very high that you already have that on your system ...
wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
gunzip -c zlib-1.2.3.tar.gz | tar xf -
cd zlib-1.2.3
- ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --shared
$MAKE
$MAKE install
env EGREP=egrep
+=item Building LibXML2
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-sources-2.6.31.tar.gz
+ gunzip -c libxml2-sources-2.6.32.tar.gz | tar xf -
+ cd libxml2-sources-2.6.32
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
=item Building fontconfig
Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
$MAKE
$MAKE install
+=item Building Pixman
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pixman-0.10.0.tar.gz
+ gunzip -c pixman-0.10.0.tar.gz | tar xf -
+ cd fontconfig-2.4.2
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
=item Building Cairo
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
gunzip -c cairo-1.4.10.tar.gz | tar xf -
cd cairo-1.4.10
./configure --prefix=$INSTALL_DIR \
=item Building Glib
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
gunzip -c glib-2.12.13.tar.gz | tar xf -
cd glib-2.12.13
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
=item Building Pango
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
- gunzip -c pango-1.17.5.tar.gz | tar xf -
- cd pango-1.17.5
- ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.gz
+ gunzip -c pango-1.21.1.tar.gz | tar xf -
+ cd pango-1.21.1
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --without-x
$MAKE
$MAKE install
tcl setups that would prevent rrdtool from building if they are included in
their current state.
- cd $BUILD_DIR/rrdtool-1.2.99907080300
+ cd $BUILD_DIR/rrdtool-1.3rc6
./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
$MAKE clean
$MAKE
projects / rrdtool.git / blobdiff