Depending on the shell you are using, you can do either (bash,zsh):
BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.2.11
+ INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
Or if you run tcsh:
set BUILD_DIR=/tmp/rrdbuild
- set INSTALL_DIR=/usr/local/rrdtool-1.2.11
+ set INSTALL_DIR=/usr/local/rrdtool-1.2.99907080300
+
+If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
+a different directory!
Now make sure the BUILD_DIR exists and go there:
cd $BUILD_DIR
Lets first assume you already have all the necessary libraries
-per-installed. Note that these instructions assume that your copies of
+pre-installed. Note that these instructions assume that your copies of
B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
could be that they are installed as B<gtar> and B<gmake> on your system.
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/rrdtool-1.2.11.tar.gz
- tar zxf rrdtool-1.2.11.tar.gz
- cd rrdtool-1.2.11
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.99907080300.tar.gz
+ tar zxf rrdtool-1.2.99907080300.tar.gz
+ cd rrdtool-1.2.99907080300
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
board, just re-run the last line of the instructions above.
But again this may have been too optimistic, and you actually have to
-compile your own copies of the required libraries. Here is how:
+compile your own copies of the required libraries.
-=over
+=head3 Build Tipps for AIX
-=item Building cgilib
+If you are woking with AIX, you may find the the B<--disable-shared> option
+will cause things to break for you. In that case you may have to install the
+shared libraries into the rrdtool PREFIX and work with B<--disable-static>
+instead.
- cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/cgilib-0.5.tar.gz
- tar zxf cgilib-0.5.tar.gz
- cd cgilib-0.5
+Another hint to get rrdtool working on AIX is to use the IBM XL C Compiler:
+
+ export CC=/usr/vac/bin/cc
+ export PERLCC=$CC
-If you are on Mac OSX you want to fix a little header problem here by doing
+(Better instructions for AIX welcome!)
- touch malloc.h
+=head2 Building Libraries
-and now you are ready to build
+In order to build the libraries you need a compiler on your system.
+Unfortunately compilers are not all alike. This has an effect on the CFLAGS
+you want to set. The examples below are for the popular GCC compiler suite.
+If you have an other compile you have to use the following settings:
- make CC=gcc CFLAGS="-O3 -fPIC -I."
- mkdir -p $BUILD_DIR/lb/include
- cp *.h $BUILD_DIR/lb/include
- mkdir -p $BUILD_DIR/lb/lib
- cp libcgi* $BUILD_DIR/lb/lib
+=over
+
+=item Sun Forte
+
+ CFLAGS="-xO3 -kPIC"
+
+=back
+
+=over
=item Building zlib
+Chances are very high that you already have that on your system ...
+
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/zlib-1.2.2.tar.gz
- tar zxf zlib-1.2.2.tar.gz
- cd zlib-1.2.2
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
+ tar zxf zlib-1.2.3.tar.gz
+ cd zlib-1.2.3
env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
make
make install
the end of line 4 means that line 4 and line 5 are on one line.
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/libpng-1.2.8-config.tar.gz
- tar zxvf libpng-1.2.8-config.tar.gz
- cd libpng-1.2.8-config
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ tar zxvf libpng-1.2.18.tar.gz
+ cd libpng-1.2.10
env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
./configure --disable-shared --prefix=$BUILD_DIR/lb
make
=item Building freetype
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/freetype-2.1.9.tar.gz
- tar zxvf freetype-2.1.9.tar.gz
- cd freetype-2.1.9
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ tar zxvf freetype-2.3.5.tar.gz
+ cd freetype-2.3.5
env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
./configure --disable-shared --prefix=$BUILD_DIR/lb
make
GNUMAKE=gmake EGREP=egrep
-=item Building libart_lgpl
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.
cd $BUILD_DIR
- wget http://people.ee.ethz.ch/oetiker/webtools/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ tar zxvf fontconfig-2.4.2.tar.gz
+ cd fontconfig-2.4.2
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Cairo
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.4.10.tar.gz
+ tar zxvf cairo-1.4.10.tar.gz
+ cd cairo-1.4.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR \
+ --enable-xlib=no \
+ --enable-xlib-render=no \
+ --enable-win32=no
+ make
+ make install
+
+=item Building Glib
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.12.13.tar.gz
+ tar zxvf glib-2.12.13.tar.gz
+ cd glib-2.12.13
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ make
+ make install
+
+=item Building Pango
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.17.5.tar.gz
+ tar zxvf pango-1.17.5.tar.gz
+ cd pango-1.17.5
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
make
make install
ranlib $BUILD_DIR/lb/lib/*.a
-Note for OpenBSD users: It seems that libcgi fails to build properly on some
-of these systems. Run F<ar rc libcgi.a cgi.o cookies.o> to get a propper
-library if you find that libcgi.a is only a few bytes in size.
-
This time you tell configure where it should be looking for libraries and
include files. This is done via environment variables. Depending on the
shell you are running, the syntax for setting environment variables is
different. Under csh/tcsh you use:
- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS -L$BUILD_DIR/lb/lib
+ set IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ setenv CPPFLAGS "$IR"
+ setenv LDFLAGS -L$BUILD_DIR/lb/lib
setenv CFLAGS -O3
If you are running bash/sh/ash/ksh/zsh use this:
- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
+ IR="-I$BUILD_DIR/lb/include -I$INSTALL_DIR/include"
+ CPPFLAGS="$IR"
+ LDFLAGS="-L$BUILD_DIR/lb/lib -R$INSTALL_DIR/lib -L$INSTALL_DIR/lib"
CFLAGS=-O3
export CPPFLAGS LDFLAGS CFLAGS
tcl setups that would prevent rrdtool from building if they are included in
their current state.
- cd $BUILD_DIR/rrdtool-1.2.11
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
+ cd $BUILD_DIR/rrdtool-1.2.99907080300
+ ./configure --prefix=$INSTALL_DIR --disable-tcl
make clean
make
make install
+SOLARIS HINT: if you want to build the perl module for the native perl (the
+one shipping with solaris) you will need the sun forte compiler
+installed on your box or you have to hand-tune bindings/perl-shared/Makefile
+while building!
+
Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if your
build has been successful.
=head1 AUTHOR
-Tobias Oetiker E<lt>oetiker@ee.ethz.chE<gt>
+Tobias Oetiker E<lt>tobi@oetiker.chE<gt>
projects / rrdtool.git / blobdiff