+Type: integer
+
+Default: 80 for protocol "http", 443 for protocol "https"
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+The username and password to use to login to the NetApp.
+
+Mandatory
+
+Type: string
+
+=item B<Interval> I<Interval>
+
+B<TODO>
+
+=back
+
+The following options decide what kind of data will be collected. You can
+either use them as a block and fine tune various parameters inside this block,
+use them as a single statement to just accept all default values, or omit it to
+not collect any data.
+
+The following options are valid inside all blocks:
+
+=over 4
+
+=item B<Multiplier> I<Multiplier>
+
+The host specific interval between data collections is multiplied by this value
+for collecting these data.
+
+Optional
+
+Type: integer
+
+Default: 1
+
+=back
+
+=head3 The System block
+
+This will collect various performance data about the whole system.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetCPULoad> B<true>|B<false>
+
+If you set this option to true the current CPU usage will be read. This will be
+the average usage between all CPUs in your NetApp without any information about
+individual CPUs.
+
+B<Note:> These are the same values that the NetApp CLI command "sysstat"
+returns in the "CPU" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: Two value lists of type "cpu", and type instances "idle" and "system".
+
+=item B<GetInterfaces> B<true>|B<false>
+
+If you set this option to true the current traffic of the network interfaces
+will be read. This will be the total traffic over all interfaces of your NetApp
+without any information about individual interfaces.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "Net kB/s" field.
+
+B<Or is it?>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "if_octects".
+
+=item B<GetDiskIO> B<true>|B<false>
+
+If you set this option to true the current IO throughput will be read. This
+will be the total IO of your NetApp without any information about individual
+disks, volumes or aggregates.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "DiskE<nbsp>kB/s" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "disk_octets".
+
+=item B<GetDiskOps> B<true>|B<false>
+
+If you set this option to true the current number of HTTP, NFS, CIFS, FCP,
+iSCSI, etc. operations will be read. This will be the total number of
+operations on your NetApp without any information about individual volumes or
+aggregates.
+
+B<Note:> These are the same values that the NetApp CLI command "sysstat"
+returns in the "NFS", "CIFS", "HTTP", "FCP" and "iSCSI" fields.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: A variable number of value lists of type "disk_ops_complex". Each type
+of operation will result in one value list with the name of the operation as
+type instance.
+
+=back
+
+=head3 The WAFL block
+
+This will collect various performance data about the WAFL file system. At the
+moment this just means cache performance.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+B<Note:> The interface to get these values is classified as "Diagnostics" by
+NetApp. This means that it is not guaranteed to be stable even between minor
+releases.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetNameCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance
+"name_cache_hit".
+
+=item B<GetDirCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance "find_dir_hit".
+
+=item B<GetInodeCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance
+"inode_cache_hit".
+
+=item B<GetBufferCache> B<true>|B<false>
+
+B<Note:> This is the same value that the NetApp CLI command "sysstat" returns
+in the "Cache hit" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance "buf_hash_hit".
+
+=back
+
+=head3 The Disks block
+
+This will collect performance data about the individual disks in the NetApp.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetBusy> B<true>|B<false>
+
+If you set this option to true the busy time of all disks will be calculated
+and the value of the busiest disk in the system will be written.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "Disk util" field. Probably.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "percent" and type instance "disk_busy".
+
+=back
+
+=head3 The VolumePerf block
+
+This will collect various performance data about the individual volumes.
+
+You can select which data to collect about which volume using the following
+options. They follow the standard ignorelist semantic.
+
+B<Note:> To get this data the collectd user needs the
+I<api-perf-object-get-instances> capability.
+
+=over 4
+
+=item B<GetIO> I<Volume>
+
+=item B<GetOps> I<Volume>
+
+=item B<GetLatency> I<Volume>
+
+Select the given volume for IO, operations or latency statistics collection.
+The argument is the name of the volume without the C</vol/> prefix.
+
+Since the standard ignorelist functionality is used here, you can use a string
+starting and ending with a slash to specify regular expression matching: To
+match the volumes "vol0", "vol2" and "vol7", you can use this regular
+expression:
+
+ GetIO "/^vol[027]$/"
+
+If no regular expression is specified, an exact match is required. Both,
+regular and exact matching are case sensitive.
+
+If no volume was specified at all for either of the three options, that data
+will be collected for all available volumes.
+
+=item B<IgnoreSelectedIO> B<true>|B<false>
+
+=item B<IgnoreSelectedOps> B<true>|B<false>
+
+=item B<IgnoreSelectedLatency> B<true>|B<false>
+
+When set to B<true>, the volumes selected for IO, operations or latency
+statistics collection will be ignored and the data will be collected for all
+other volumes.
+
+When set to B<false>, data will only be collected for the specified volumes and
+all other volumes will be ignored.
+
+If no volumes have been specified with the above B<Get*> options, all volumes
+will be collected regardless of the B<IgnoreSelected*> option.
+
+Defaults to B<false>
+
+=back
+
+=head3 The VolumeUsage block
+
+This will collect capacity data about the individual volumes.
+
+B<Note:> To get this data the collectd user needs the I<api-volume-list-info>
+capability.
+
+=over 4
+
+=item B<GetCapacity> I<VolumeName>
+
+The current capacity of the volume will be collected. This will result in two
+to four value lists, depending on the configuration of the volume. All data
+sources are of type "df_complex" with the name of the volume as
+plugin_instance.
+
+There will be type_instances "used" and "free" for the number of used and
+available bytes on the volume. If the volume has some space reserved for
+snapshots, a type_instance "snap_reserved" will be available. If the volume
+has SIS enabled, a type_instance "sis_saved" will be available. This is the
+number of bytes saved by the SIS feature.
+
+B<Note:> The current NetApp API has a bug that results in this value being
+reported as a 32E<nbsp>bit number. This plugin tries to guess the correct
+number which works most of the time. If you see strange values here, bug
+NetApp support to fix this.
+
+Repeat this option to specify multiple volumes.
+
+=item B<IgnoreSelectedCapacity> B<true>|B<false>
+
+Specify whether to collect only the volumes selected by the B<GetCapacity>
+option or to ignore those volumes. B<IgnoreSelectedCapacity> defaults to
+B<false>. However, if no B<GetCapacity> option is specified at all, all
+capacities will be selected anyway.
+
+=item B<GetSnapshot> I<VolumeName>
+
+B<Defunct!> Select volumes from which to collect snapshot information.
+
+Repeat this option to specify multiple volumes.
+
+=item B<IgnoreSelectedSnapshot>
+
+Specify whether to collect only the volumes selected by the B<GetSnapshot>
+option or to ignore those volumes. B<IgnoreSelectedSnapshot> defaults to
+B<false>. However, if no B<GetSnapshot> option is specified at all, all
+capacities will be selected anyway.
+
+=back
+
+=head2 Plugin C<netlink>
+
+The C<netlink> plugin uses a netlink socket to query the Linux kernel about
+statistics of various interface and routing aspects.
+
+=over 4
+
+=item B<Interface> I<Interface>
+
+=item B<VerboseInterface> I<Interface>
+
+Instruct the plugin to collect interface statistics. This is basically the same
+as the statistics provided by the C<interface> plugin (see above) but
+potentially much more detailed.
+
+When configuring with B<Interface> only the basic statistics will be collected,
+namely octets, packets, and errors. These statistics are collected by
+the C<interface> plugin, too, so using both at the same time is no benefit.
+
+When configured with B<VerboseInterface> all counters B<except> the basic ones,
+so that no data needs to be collected twice if you use the C<interface> plugin.
+This includes dropped packets, received multicast packets, collisions and a
+whole zoo of differentiated RX and TX errors. You can try the following command
+to get an idea of what awaits you:
+
+ ip -s -s link list
+
+If I<Interface> is B<All>, all interfaces will be selected.
+
+=item B<QDisc> I<Interface> [I<QDisc>]
+
+=item B<Class> I<Interface> [I<Class>]
+
+=item B<Filter> I<Interface> [I<Filter>]
+
+Collect the octets and packets that pass a certain qdisc, class or filter.
+
+QDiscs and classes are identified by their type and handle (or classid).
+Filters don't necessarily have a handle, therefore the parent's handle is used.
+The notation used in collectd differs from that used in tc(1) in that it
+doesn't skip the major or minor number if it's zero and doesn't print special
+ids by their name. So, for example, a qdisc may be identified by
+C<pfifo_fast-1:0> even though the minor number of B<all> qdiscs is zero and
+thus not displayed by tc(1).
+
+If B<QDisc>, B<Class>, or B<Filter> is given without the second argument,
+i.E<nbsp>.e. without an identifier, all qdiscs, classes, or filters that are
+associated with that interface will be collected.
+
+Since a filter itself doesn't necessarily have a handle, the parent's handle is
+used. This may lead to problems when more than one filter is attached to a
+qdisc or class. This isn't nice, but we don't know how this could be done any
+better. If you have a idea, please don't hesitate to tell us.
+
+As with the B<Interface> option you can specify B<All> as the interface,
+meaning all interfaces.
+
+Here are some examples to help you understand the above text more easily:
+
+ <Plugin netlink>
+ VerboseInterface "All"
+ QDisc "eth0" "pfifo_fast-1:0"