# ExchangeType "fanout"
# RoutingKey "collectd"
# Persistent false
+ # ConnectionRetryDelay 0
# Format "command"
# StoreRates false
# GraphitePrefix "collectd."
# QueueDurable false
# QueueAutoDelete true
# RoutingKey "collectd.#"
+ # ConnectionRetryDelay 0
</Subscribe>
</Plugin>
default), the I<transient> delivery mode will be used, i.e. messages may be
lost due to high load, overflowing queues or similar issues.
+=item B<ConnectionRetryDelay> I<Delay>
+
+When the connection to the AMQP broker is lost, defines the time in seconds to
+wait before attempting to reconnect. Defaults to 0, which implies collectd will
+attempt to reconnect at each read interval (in Subscribe mode) or each time
+values are ready for submission (in Publish mode).
+
=item B<Format> B<Command>|B<JSON>|B<Graphite> (Publish only)
Selects the format in which messages are sent to the broker. If set to
possibly need this option. What CA certificates come bundled with C<libcurl>
and are checked by default depends on the distribution you use.
+=item B<Timeout> I<Milliseconds>
+
+The B<Timeout> option sets the overall timeout for HTTP requests, in
+milliseconds. By default, the configured B<Interval> is used to set the
+timeout.
+
=back
=head2 Plugin C<apcups>
=back
+=head2 Plugin C<ceph>
+
+The ceph plugin collects values from JSON data to be parsed by B<libyajl>
+(L<https://lloyd.github.io/yajl/>) retrieved from ceph daemon admin sockets.
+
+A separate B<Daemon> block must be configured for each ceph daemon to be
+monitored. The following example will read daemon statistics from four
+separate ceph daemons running on the same device (two OSDs, one MON, one MDS) :
+
+ <Plugin ceph>
+ LongRunAvgLatency false
+ ConvertSpecialMetricTypes true
+ <Daemon "osd.0">
+ SocketPath "/var/run/ceph/ceph-osd.0.asok"
+ </Daemon>
+ <Daemon "osd.1">
+ SocketPath "/var/run/ceph/ceph-osd.1.asok"
+ </Daemon>
+ <Daemon "mon.a">
+ SocketPath "/var/run/ceph/ceph-mon.ceph1.asok"
+ </Daemon>
+ <Daemon "mds.a">
+ SocketPath "/var/run/ceph/ceph-mds.ceph1.asok"
+ </Daemon>
+ </Plugin>
+
+The ceph plugin accepts the following configuration options:
+
+=over 4
+
+=item B<LongRunAvgLatency> B<true>|B<false>
+
+If enabled, latency values(sum,count pairs) are calculated as the long run
+average - average since the ceph daemon was started = (sum / count).
+When disabled, latency values are calculated as the average since the last
+collection = (sum_now - sum_last) / (count_now - count_last).
+
+Default: Disabled
+
+=item B<ConvertSpecialMetricTypes> B<true>|B<false>
+
+If enabled, special metrics (metrics that differ in type from similar counters)
+are converted to the type of those similar counters. This currently only
+applies to filestore.journal_wr_bytes which is a counter for OSD daemons. The
+ceph schema reports this metric type as a sum,count pair while similar counters
+are treated as derive types. When converted, the sum is used as the counter
+value and is treated as a derive type.
+When disabled, all metrics are treated as the types received from the ceph schema.
+
+Default: Enabled
+
+=back
+
+Each B<Daemon> block must have a string argument for the plugin instance name.
+A B<SocketPath> is also required for each B<Daemon> block:
+
+=over 4
+
+=item B<Daemon> I<DaemonName>
+
+Name to be used as the instance name for this daemon.
+
+=item B<SocketPath> I<SocketPath>
+
+Specifies the path to the UNIX admin socket of the ceph daemon.
+
+=back
+
=head2 Plugin C<cgroups>
This plugin collects the CPU user/system time for each I<cgroup> by reading the
Measure response time for the request. If this setting is enabled, B<Match>
blocks (see below) are optional. Disabled by default.
+Beware that requests will get aborted if they take too long to complete. Adjust
+B<Timeout> accordingly if you expect B<MeasureResponseTime> to report such slow
+requests.
+
=item B<MeasureResponseCode> B<true>|B<false>
Measure response code for the request. If this setting is enabled, B<Match>
B<MeasureResponseCode> options are set to B<true>, B<Match> blocks are
optional.
+=item B<Timeout> I<Milliseconds>
+
+The B<Timeout> option sets the overall timeout for HTTP requests, in
+milliseconds. By default, the configured B<Interval> is used to set the
+timeout. Prior to version 5.5.0, there was no timeout and requests could hang
+indefinitely. This legacy behaviour can be achieved by setting the value of
+B<Timeout> to 0.
+
+If B<Timeout> is 0 or bigger than the B<Interval>, keep in mind that each slow
+network connection will stall one read thread. Adjust the B<ReadThreads> global
+setting accordingly to prevent this from blocking other plugins.
+
=back
=head2 Plugin C<curl_json>
=item B<Post> I<Body>
+=item B<Timeout> I<Milliseconds>
+
These options behave exactly equivalent to the appropriate options of the
I<cURL> plugin. Please see there for a detailed description.
=item B<Post> I<Body>
+=item B<Timeout> I<Milliseconds>
+
These options behave exactly equivalent to the appropriate options of the
I<cURL plugin>. Please see there for a detailed description.
<Data "voltage-input-1">
RegisterBase 0
RegisterType float
- ModbusRegisterType holding
+ RegisterCmd ReadHolding
Type voltage
Instance "input-1"
</Data>
<Data "voltage-input-2">
RegisterBase 2
RegisterType float
- ModbusRegisterType holding
+ RegisterCmd ReadHolding
Type voltage
Instance "input-2"
</Data>
<Data "supply-temperature-1">
RegisterBase 0
RegisterType Int16
- ModbusRegisterType holding
+ RegisterCmd ReadHolding
Type temperature
Instance "temp-1"
</Data>
B<Uint32> or B<Float>, two 16E<nbsp>bit registers will be read and the data is
combined into one value. Defaults to B<Uint16>.
-=item B<ModbusRegisterType> B<holding>|B<input>
+=item B<RegisterCmd> B<ReadHolding>|B<ReadInput>
Specifies register type to be collected from device. Works only with libmodbus
-2.9.2 or higher. Defaults to B<holding>.
+2.9.2 or higher. Defaults to B<ReadHolding>.
=item B<Type> I<Type>
Enable the collection of master / slave statistics in a replication setup. In
order to be able to get access to these statistics, the user needs special
-privileges. See the B<User> documentation above.
+privileges. See the B<User> documentation above. Defaults to B<false>.
=item B<SlaveNotifications> I<true|false>
If enabled, the plugin sends a notification if the replication slave I/O and /
-or SQL threads are not running.
+or SQL threads are not running. Defaults to B<false>.
=item B<ConnectTimeout> I<Seconds>
I<Factor> must be in the range C<[0.0-1.0)>, i.e. between zero (inclusive) and
one (exclusive).
+=item B<CollectStatistics> B<false>|B<true>
+
+When set to B<true>, various statistics about the I<rrdcached> daemon will be
+collected, with "rrdcached" as the I<plugin name>. Defaults to B<false>.
+
+Statistics are read via I<rrdcached>s socket using the STATS command.
+See L<rrdcached(1)> for details.
+
=back
=head2 Plugin C<rrdtool>
projects / collectd.git / blobdiff