<Plugin "bind">
URL "http://localhost:8053/"
+ ParseTime false
OpCodes true
QTypes true
URL from which to retrieve the XML data. If not specified,
C<http://localhost:8053/> will be used.
-=item B<OpCodes> I<true>|I<false>
+=item B<ParseTime> B<true>|B<false>
+
+When set to B<true>, the time provided by BIND will be parsed and used to
+dispatch the values. When set to B<false>, the local time source is queried.
+
+This setting is set to B<true> by default for backwards compatibility; setting
+this to B<false> is I<recommended> to avoid problems with timezones and
+localization.
+
+=item B<OpCodes> B<true>|B<false>
When enabled, statistics about the I<"OpCodes">, for example the number of
C<QUERY> packets, are collected.
Default: Enabled.
-=item B<QTypes> I<true>|I<false>
+=item B<QTypes> B<true>|B<false>
When enabled, the number of I<incoming> queries by query types (for example
C<A>, C<MX>, C<AAAA>) is collected.
Default: Enabled.
-=item B<ServerStats> I<true>|I<false>
+=item B<ServerStats> B<true>|B<false>
Collect global server statistics, such as requests received over IPv4 and IPv6,
successful queries, and failed updates.
Default: Enabled.
-=item B<ZoneMaintStats> I<true>|I<false>
+=item B<ZoneMaintStats> B<true>|B<false>
Collect zone maintenance statistics, mostly information about notifications
(zone updates) and zone transfers.
Default: Enabled.
-=item B<ResolverStats> I<true>|I<false>
+=item B<ResolverStats> B<true>|B<false>
Collect resolver statistics, i.E<nbsp>e. statistics about outgoing requests
(e.E<nbsp>g. queries over IPv4, lame servers). Since the global resolver
=over 4
-=item B<QTypes> I<true>|I<false>
+=item B<QTypes> B<true>|B<false>
If enabled, the number of I<outgoing> queries by query type (e.E<nbsp>g. C<A>,
C<MX>) is collected.
Default: Enabled.
-=item B<ResolverStats> I<true>|I<false>
+=item B<ResolverStats> B<true>|B<false>
Collect resolver statistics, i.E<nbsp>e. statistics about outgoing requests
(e.E<nbsp>g. queries over IPv4, lame servers).
Default: Enabled.
-=item B<CacheRRSets> I<true>|I<false>
+=item B<CacheRRSets> B<true>|B<false>
If enabled, the number of entries (I<"RR sets">) in the view's cache by query
type is collected. Negative entries (queries which resulted in an error, for
</Plugin>
In the B<Plugin> block, there may be one or more B<URL> blocks, each defining a
-URL to be fetched via HTTP (using libcurl). Within each B<URL> block there are
+URL to be fetched using libcurl. Within each B<URL> block there are
options which specify the connection parameters, for example authentication
information, and one or more B<XPath> blocks.
=back
+=head2 Plugin C<md>
+
+The C<md plugin> collects information from Linux Software-RAID devices (md).
+
+All reported values are of the type C<md_disks>. Reported type instances are
+I<active>, I<failed> (present but not operational), I<spare> (hot stand-by) and
+I<missing> (physically absent) disks.
+
+=over 4
+
+=item B<Device> I<Device>
+
+Select md devices based on device name. The I<device name> is the basename of
+the device, i.e. the name of the block device without the leading C</dev/>.
+See B<IgnoreSelected> for more details.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Invert device selection: If set to B<true>, all md devices B<except> those
+listed using B<Device> are collected. If B<false> (the default), only those
+listed are collected. If no configuration is given, the B<md> plugin will
+collect data from all md devices.
+
+=back
+
=head2 Plugin C<memcachec>
The C<memcachec plugin> connects to a memcached server, queries one or more
=item B<MaxPacketSize> I<1024-65535>
Set the maximum size for datagrams received over the network. Packets larger
-than this will be truncated. Defaults to 1452E<nbsp>bytes.
+than this will be truncated. Defaults to 1452E<nbsp>bytes, which is the maximum
+payload size that can be transmitted in one Ethernet frame using IPv6E<nbsp>/
+UDP.
+
+On the server side, this limit should be set to the largest value used on
+I<any> client. Likewise, the value on the client must not be larger than the
+value on the server, or data will be lost.
+
+B<Compatibility:> Versions prior to I<versionE<nbsp>4.8> used a fixed sized
+buffer of 1024E<nbsp>bytes. Versions I<4.8>, I<4.9> and I<4.10> used a default
+value of 1024E<nbsp>bytes to avoid problems when sending data to an older
+server.
=item B<Forward> I<true|false>
=over 4
+=item B<SensorConfigFile> I<File>
+
+Read the I<lm_sensors> configuration from I<File>. When unset (recommended),
+the library's default will be used.
+
=item B<Sensor> I<chip-bus-address/type-feature>
Selects the name of the sensor which you want to collect or ignore, depending
Please note that B<debug> is only available if collectd has been compiled with
debugging support.
+=item B<NotifyLevel> B<OKAY>|B<WARNING>|B<FAILURE>
+
+Controls which notifications should be sent to syslog. The default behaviour is
+not to send any. Less severe notifications always imply logging more severe
+notifications: Setting this to B<OKAY> means all notifications will be sent to
+syslog, setting this to B<WARNING> will send B<WARNING> and B<FAILURE>
+notifications but will dismiss B<OKAY> notifications. Setting this option to
+B<FAILURE> will only send failures to syslog.
+
=back
=head2 Plugin C<table>
collect on-wire traffic you could, for example, use the logging facilities of
iptables to feed data for the guest IPs into the iptables plugin.
+=head2 Plugin C<write_graphite>
+
+The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
+storage and graphing project. The plugin connects to I<Carbon>, the data layer
+of I<Graphite>, and sends data via the "line based" protocol (per default using
+portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
+minimize the number of network packets.
+
+Synopsis:
+
+ <Plugin write_graphite>
+ <Carbon>
+ Host "localhost"
+ Port "2003"
+ Prefix "collectd"
+ </Carbon>
+ </Plugin>
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<2003>.
+
+=item B<Prefix> I<String>
+
+When set, I<String> is added in front of the host name. Dots and whitespace are
+I<not> escaped in this string (see B<EscapeCharacter> below).
+
+=item B<Postfix> I<String>
+
+When set, I<String> is appended to the host name. Dots and whitespace are
+I<not> escaped in this string (see B<EscapeCharacter> below).
+
+=item B<EscapeCharacter> I<Char>
+
+I<Carbon> uses the dot (C<.>) as escape character and doesn't allow whitespace
+in the identifier. The B<EscapeCharacter> option determines which character
+dots, whitespace and control characters are replaced with. Defaults to
+underscore (C<_>).
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
+=item B<SeparateInstances> B<false>|B<true>
+
+If set to B<true>, the plugin instance and type instance will be in their own
+path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
+default), the plugin and plugin instance (and likewise the type and type
+instance) are put into once component, for example C<host.cpu-0.cpu-idle>.
+
+=item B<AlwaysAppendDS> B<false>|B<true>
+
+If set the B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=back
+
+=head2 Plugin C<write_mongodb>
+
+The I<write_mongodb plugin> will send values to I<MongoDB>, a schema-less
+NoSQL database.
+
+B<Synopsis:>
+
+ <Plugin "write_mongodb">
+ <Node "default">
+ Host "localhost"
+ Port "27017"
+ Timeout 1000
+ StoreRates true
+ </Node>
+ </Plugin>
+
+The plugin can send values to multiple instances of I<MongoDB> by specifying
+one B<Node> block for each instance. Within the B<Node> blocks, the following
+options are available:
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<27017>.
+
+=item B<Timeout> I<Timeout>
+
+Set the timeout for each operation on I<MongoDB> to I<Timeout> milliseconds.
+Setting this option to zero means no timeout, which is the default.
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer
+number.
+
+=back
+
=head2 Plugin C<write_http>
This output plugin submits values to an http server by POST them using the
Please note that these placeholders are B<case sensitive>!
-=item B<Severity> B<"FATAL">|B<"WARNING">|B<"OKAY">
+=item B<Severity> B<"FAILURE">|B<"WARNING">|B<"OKAY">
Sets the severity of the message. If omitted, the severity B<"WARNING"> is
used.