BaseDir "/path/to/data/"
PIDFile "/path/to/pidfile/collectd.pid"
- LogFile "/path/to/logfile/collectd.log"
Server "123.123.123.123" 12345
LoadPlugin cpu
and deleted when the program ist stopped. Some init-scripts might override this
setting using the B<-P> commandline option.
-=item B<LogFile> I<File>
+=item B<Interval> I<Seconds>
-Sets the file to write debugging output to. This is only used if compiled with
-debugging enabled. It's ignored otherwise.
+Configures the interval in which to query the read plugins. Obviously smaller
+values lead to a higher system load produces by collectd, while higher values
+lead to more coarse statistics.
+
+=item B<ReadThreads> I<Num>
+
+Number of threads to start for reading plugins. The default value if B<5>, but
+you may want to increase this if you have more than five plugins that take a
+long time to read. Mostly those are plugin that do network-IO. Setting this to
+a value higher than the number of plugins you've loaded is totally useless.
=back
</Location>
</IfModule>
+Since it's C<mod_status> module is very similar to Apache's, B<lighttpd> is
+also supported. It introduces a new field, called C<BusyServers>, to count the
+number of currently connected clients. This field is also supported.
+
The following options are accepted by the C<apache>-plugin:
=over 4
=back
+=head2 Plugin C<csv>
+
+=over 4
+
+=item B<DataDir> I<Directory>
+
+Set the directory to store RRD-files under. Per default RRD-files are generated
+beneath the daemon's working directory, i.E<nbsp>e. the B<BaseDir>.
+
+=back
+
=head2 Plugin C<df>
=over 4
=back
+=head2 Plugin C<exec>
+
+Please make sure to read L<collectd/"SPECIAL PLUGINS"> before using this
+plugin. It containes valueable information on when the executable is executed
+and the output that is expected from it.
+
+=over 4
+
+=item B<Exec> I<User> I<Executable>
+
+Execute the executable I<Executable> as user I<User>.
+
+=back
+
=head2 Plugin C<hddtemp>
=over 4
=back
+=head2 Plugin C<interface>
+
+=over 4
+
+=item B<Interface> I<Interface>
+
+Select this interface. By default these interfaces will then be collected. For
+a more detailed description see B<IgnoreSelected> below.
+
+=item B<IgnoreSelected> I<true>|I<false>
+
+If no configuration if given, the B<traffic>-plugin will collect data from
+all interfaces. This may not be practical, especially for loopback- and
+similar interfaces. Thus, you can use the B<Interface>-option to pick the
+interfaces you're interested in. Sometimes, however, it's easier/prefered
+to collect all interfaces I<except> a few ones. This option enables you to
+do that: By setting B<IgnoreSelected> to I<true> the effect of
+B<Interface> is inversed: All selected interfaces are ignored and all
+other interfaces are collected.
+
+=back
+
+=head2 Plugin C<iptables>
+
+=over 4
+
+=item B<Chain> I<Table> I<Chain> [I<Comment|Number> [I<Name>]]
+
+Select the rules to count. If only I<Table> and I<Chain> are given, this plugin
+will collect the counters of all rules which have a comment-match. The comment
+is then used as type-instance.
+
+If I<Comment> or I<Number> is given, only the rule with the matching comment or
+the I<n>th rule will be collected. Again, the comment (or the number) will be
+used as the type-instance.
+
+If I<Name> is supplied, it will be used as the type-instance instead of the
+comment or the number.
+
+=back
+
+=head2 Plugin C<irq>
+
+=over 4
+
+=item B<Irq> I<Irq>
+
+Select this irq. By default these irqs will then be collected. For a more
+detailed description see B<IgnoreSelected> below.
+
+=item B<IgnoreSelected> I<true>|I<false>
+
+If no configuration if given, the B<irq>-plugin will collect data from all
+irqs. This may not be practical, especially if no interrupts happen. Thus, you
+can use the B<Irq>-option to pick the interupt you're interested in.
+Sometimes, however, it's easier/prefered to collect all interupts I<except> a
+few ones. This option enables you to do that: By setting B<IgnoreSelected> to
+I<true> the effect of B<Irq> is inversed: All selected interupts are ignored
+and all other interupts are collected.
+
+=back
+
+=head2 Plugin C<logfile>
+
+=over 4
+
+=item B<LogLevel> B<debug|info|notice|warning|err>
+
+Sets the log-level. If, for example, set to B<notice>, then all events with
+severity B<notice>, B<warning>, or B<err> will be written to the logfile.
+
+=item B<File> I<File>
+
+Sets the file to write log messages to. The special strings B<stdout> and
+B<stderr> can be used to write to the standard output and standard error
+channels, respectively. This, of course, only makes much sense when collectd is
+running in foreground- or non-daemon-mode.
+
+=back
+
=head2 Plugin C<mbmon>
=over 4
That means that multicast packets will be sent with a TTL of C<1> (one) on most
operating systems.
+=item B<Forward> I<true|false>
+
+If set to I<true>, write packets that were received via the network plugin to
+the sending sockets. This should only be activated when the B<Listen>- and
+B<Server>-statements differ. Otherwise packets may be send multiple times to
+the same multicast group. While this results in more network traffic than
+neccessary it's not a huge problem since the plugin has a duplicate detection,
+so the values will not loop.
+
+=item B<CacheFlush> I<Seconds>
+
+For each host/plugin/type combination the C<network plugin> caches the time of
+the last value being sent or received. Every I<Seconds> seconds the plugin
+searches and removes all entries that are older than I<Seconds> seconds, thus
+freeing the unused memory again. Since this process is somewhat expensive and
+normally doesn't do much, this value should not be too small. The default is
+1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
+either.
+
=back
=head2 Plugin C<ntpd>
=back
+=head2 Plugin C<nut>
+
+=over 4
+
+=item B<UPS> I<upsname>B<@>I<hostname>[B<:>I<port>]
+
+Add a UPS to collect data from. The format is identical to the one accepted by
+L<upsc(8)>.
+
+=back
+
+=head2 Plugin C<perl>
+
+=over 4
+
+=item B<LoadPlugin> I<Plugin>
+
+Loads the Perl plugin I<Plugin>. This does basically the same as B<use> would
+do in a Perl program.
+
+=item B<BaseName> I<Name>
+
+Prepends I<Name>B<::> to all plugin names loaded after this option. This is
+provided for convenience to keep plugin names short.
+
+=item B<IncludeDir> I<Dir>
+
+Adds I<Dir> to the B<@INC> array. This is the same as using the B<-IDir>
+command line option or B<use lib Dir> in the source code.
+
+=back
+
=head2 Plugin C<ping>
=over 4
=back
-=head2 Plugin C<rrdtool>
+=head2 Plugin C<processes>
=over 4
-=item B<CacheTimeout> I<Seconds>
+=item B<Process> I<Name>
+
+Select more detailed statistics of processes matching this name. The statistics
+collected for these selected processes are size of the resident segment size
+(RSS), user- and system-time used, number of processes and number of threads,
+and minor and major pagefaults.
-If this option is set to a value greater than zero, the C<rrdtool>-plugin will
-write values every I<Seconds> seconds to the RRD-files. Writing multiple values
-at once reduces IO-operations and thus lessens the load produced by updating
-the files. The tradeoff is that the graphs kind of "drag behind" and that more
-memory is used.
+=back
+
+=head2 Plugin C<rrdtool>
+
+You can use the settings B<StepSize>, B<HeartBeat>, B<RRARows>, and B<XFF> to
+finetune your RRD-files. Please read L<rrdcreate(1)> if you encounter problems
+using these settings. If you don't want to dive into the depths of RRDTool, you
+can savely ignore these settings.
+
+=over 4
=item B<DataDir> I<Directory>
-Set the directory to store RRD-files under. Per default RRD-files are generated
-beneath the daemons working directory, i.E<nbsp>e. the B<BaseDir>.
+Set the directory to store CSV-files under. Per default CSV-files are generated
+beneath the daemon's working directory, i.E<nbsp>e. the B<BaseDir>.
+
+=item B<StepSize> I<Seconds>
+
+Sets the stepsize of newly created RRD-files. Ideally (and per default) this
+setting is identical to the global B<Interval>-option and should not be
+smaller. If unsure, don't set this option.
+
+=item B<HeartBeat> I<Seconds>
+
+Sets the heartbeat of newly created RRD-files. Ideally this setting is bigger
+than the B<Interval>-setting, by default it's twice the B<Interval>-setting. If
+unsure, don't set this option.
+
+=item B<RRARows> I<NumRows>
+
+The C<rrdtool plugin> calculates the number of PDPs per CDP based on the
+B<StepSize>, this setting and a timespan. This plugin creates RRD-files with
+three times five RRAs, i. e. five RRAs with the CFs B<MIN>, B<AVERAGE>, and
+B<MAX>. The five RRAs are optimized for graphs covering one hour, one day, one
+week, one month, and one year.
+
+So for each timespan, it calculates how many PDPs need to be consolidated into
+one CDP by calculating:
+ number of PDPs = timespan / (stepsize * rrarows)
+
+Bottom line is, set this no smaller than the width of you graphs in pixels. The
+default is 1200.
+
+=item B<RRATimespan> I<Seconds>
+
+Adds an RRA-timespan, given in seconds. Use this option mulitple times to have
+more then one RRA. If this option is never used, the built-in default of (3600,
+86400, 604800, 2678400, 31622400) is used.
+
+For more information on how RRA-sizes are calculated see B<RRARows> above.
+
+=item B<XFF> I<Factor>
+
+Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.
+
+=item B<CacheFlush> I<Seconds>
+
+When the C<rrdtool plugin> uses a cache (by setting B<CacheTimeout>, see below)
+it writes all values for a certain RRD-file if the oldest value is older than
+(or equal to) the number of seconds specified. If some RRD-file is not updated
+anymore for some reason (the computer was shut down, the network is broken,
+etc.) some values may still be in the cache. If B<CacheFlush> is set, then the
+entire cache is searched for entries older than B<CacheTimeout> seconds and
+written to disk every I<Seconds> seconds. Since this is kind of expensive and
+does nothing under normal circumstances, this value should not be too small.
+900 seconds might be a good value, though setting this to 7200 seconds doesn't
+normally do much harm either.
+
+=item B<CacheTimeout> I<Seconds>
+
+If this option is set to a value greater than zero, the C<rrdtool plugin> will
+save values in a cache, as described above. Writing multiple values at once
+reduces IO-operations and thus lessens the load produced by updating the files.
+The tradeoff is that the graphs kind of "drag behind" and that more memory is
+used.
=back
=over 4
-=item B<ExtendedSensorNaming> I<true>|I<false>
-
-If set to I<true> this option switches on the extended sensors and RRD-files
-naming. This option exists to preserve backwards compatibility. It is
-recommended that you set this option to I<true>. The default is I<false> to
-maintain compatibility only.
-
-Sensors get names like I<chip-bus-address/type-feature> (e.g.
-I<it8712-isa-0290/voltage-in1>) and RRD files are therefore stored in a
-standalone directory inside the B<DataDir> directory and get names like
-I<lm_sensors-chip-bus-address/type-feature.rrd> (e.g.
-I<lm_sensors-it8712-isa-0290/voltage-in1.rrd>).
-
-The B<ExtendedSensorNaming> option breaks the compatibility with previous
-sensors and RRD files naming and the place where RRDs are stored. If you turn
-it on, the plugin will create new RRD files in a standalone directory inside
-the B<DataDir> directory and without previous history. You can rename ``old''
-RRD-files to preserve already collected statistics, because the file layout
-hasn't changed. If you have two chips of the same type, you need to use
-B<ExtendedSensorNaming> in order to collect information from both chips.
-
-If not set or set to I<false>, the extended naming is not active. Sensors get
-names like I<chip-feature> (e.g. I<it8712-in1>) and RRD files are stored in the
-main B<DataDir> directory and get names like I<sensors-chip-feature.rrd> (e.g.
-I<sensors-it8712-in1.rrd>). You simply continue using the plugin the old way
-and additionally also getting data for newly added sensors in this mode.
-
-=item B<Sensor> I<chip-feature> or B<Sensor> I<chip-bus-address/type-feature>
-
-Both option modes select the name of the sensor which you want to collect.
-The naming scheme is dependent on the state of the B<ExtendedSensorNaming>
-option (see previous option). Both option modes can also deselect the
-sensor according to the B<IgnoreSelected> option (see below).
-
-For example the option "B<Sensor> I<it8712-in1>" will cause the collectd
-to gather data for the voltage sensor I<in1> of the I<it8712> chip in case
-of the B<ExtendedSensorNaming> option is set to I<false>.
-
-And likewise the option "B<Sensor> I<it8712-isa-0290/voltage-in1>" will
-cause the collectd to gather data for the voltage sensor I<in1> of the I<it8712>
-on the isa bus at the address 0290 in case of the B<ExtendedSensorNaming>
-option set to I<true>.
+=item B<Sensor> I<chip-bus-address/type-feature>
+
+Selects the name of the sensor which you want to collect or ignore, depending
+on the B<IgnoreSelected> below. For example, the option "B<Sensor>
+I<it8712-isa-0290/voltage-in1>" will cause collectd to gather data for the
+voltage sensor I<in1> of the I<it8712> on the isa bus at the address 0290.
=item B<IgnoreSelected> I<true>|I<false>
-If no configuration if given, the B<sensors>-plugin will collect data from
-all sensors. This may not be practical, especially for uninteresting sensors.
-Thus, you can use the B<Sensor>-option to pick the sensors you're
-interested in. Sometimes, however, it's easier/prefered to collect all
-sensors I<except> a few ones. This option enables you to
-do that: By setting B<IgnoreSelected> to I<true> the effect of
-B<Sensor> is inversed: All selected sensors are ignored and all
-other sensors are collected.
+If no configuration if given, the B<sensors>-plugin will collect data from all
+sensors. This may not be practical, especially for uninteresting sensors.
+Thus, you can use the B<Sensor>-option to pick the sensors you're interested
+in. Sometimes, however, it's easier/prefered to collect all sensors I<except> a
+few ones. This option enables you to do that: By setting B<IgnoreSelected> to
+I<true> the effect of B<Sensor> is inversed: All selected sensors are ignored
+and all other sensors are collected.
-back
+=back
+
+=head2 Plugin C<syslog>
+
+=over 4
+
+=item B<LogLevel> B<debug|info|notice|warning|err>
+
+Sets the log-level. If, for example, set to B<notice>, then all events with
+severity B<notice>, B<warning>, or B<err> will be submitted to the
+syslog-daemon.
=back
-=head2 Plugin C<traffic>
+=head2 Plugin C<unixsock>
=over 4
-=item B<Interface> I<Interface>
+=item B<SocketFile> I<Path>
-Select this interface. By default these interfaces will then be collected. For a more detailed description see B<IgnoreSelected> below.
+Sets the socket-file which is to be created.
-=item B<IgnoreSelected> I<true>|I<false>
+=item B<SocketGroup> I<Group>
-If no configuration if given, the B<traffic>-plugin will collect data from
-all interfaces. This may not be practical, especially for loopback- and
-similar interfaces. Thus, you can use the B<Interface>-option to pick the
-interfaces you're interested in. Sometimes, however, it's easier/prefered
-to collect all interfaces I<except> a few ones. This option enables you to
-do that: By setting B<IgnoreSelected> to I<true> the effect of
-B<Interface> is inversed: All selected interfaces are ignored and all
-other interfaces are collected.
+If running as root change the group of the UNIX-socket after it has been
+created. Defaults to B<collectd>.
+
+=item B<SocketPerms> I<Permissions>
+
+Change the file permissions of the UNIX-socket after it has been created. The
+permissions must be given as a numeric, octal value as you would pass to
+L<chmod(1)>. Defaults to B<0770>.
=back
projects / collectd.git / blobdiff