possibly need this option. What CA certificates come bundled with C<libcurl>
and are checked by default depends on the distribution you use.
+=item B<SSLCiphers> I<list of ciphers>
+
+Specifies which ciphers to use in the connection. The list of ciphers
+must specify valid ciphers. See
+L<http://www.openssl.org/docs/apps/ciphers.html> for details.
+
=item B<Timeout> I<Milliseconds>
-The B<Timeout> option sets the overall timeout for HTTP requests, in
+The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
milliseconds. By default, the configured B<Interval> is used to set the
timeout.
=item B<Timeout> I<Milliseconds>
-The B<Timeout> option sets the overall timeout for HTTP requests, in
+The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
milliseconds. By default, the configured B<Interval> is used to set the
timeout.
=head2 Plugin C<barometer>
-This plugin reads absolute air pressure using digital barometer sensor MPL115A2
-or MPL3115 from Freescale (sensor attached to any I2C bus available in
-the computer, for HW details see
-I<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL115A> or
-I<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL3115A2>).
-The sensor type - one fo these two - is detected automatically by the plugin
-and indicated in the plugin_instance (typically you will see subdirectory
-"barometer-mpl115" or "barometer-mpl3115").
+This plugin reads absolute air pressure using digital barometer sensor on a I2C
+bus. Supported sensors are:
+
+=over 5
+
+=item I<MPL115A2> from Freescale,
+see L<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL115A>.
+
+
+=item I<MPL3115> from Freescale
+see L<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL3115A2>.
+
+
+=item I<BMP085> from Bosch Sensortec
+
+=back
+
+The sensor type - one of the above - is detected automatically by the plugin
+and indicated in the plugin_instance (you will see subdirectory
+"barometer-mpl115" or "barometer-mpl3115", or "barometer-bmp085"). The order of
+detection is BMP085 -> MPL3115 -> MPL115A2, the first one found will be used
+(only one sensor can be used by the plugin).
The plugin provides absolute barometric pressure, air pressure reduced to sea
level (several possible approximations) and as an auxiliary value also internal
the standard Linux i2c-dev interface (the particular bus driver has to
support the SM Bus command subset).
-The reduction or normalization to mean sea level pressure requires (depedning on
-selected method/approximation) also altitude and reference to temperature sensor(s).
-When multiple temperature sensors are configured the minumum of their values is
-always used (expecting that the warmer ones are affected by e.g. direct sun light
-at that moment).
+The reduction or normalization to mean sea level pressure requires (depending
+on selected method/approximation) also altitude and reference to temperature
+sensor(s). When multiple temperature sensors are configured the minumum of
+their values is always used (expecting that the warmer ones are affected by
+e.g. direct sun light at that moment).
Synopsis:
=item B<Device> I<device>
-Device name of the I2C bus to which the sensor is connected. Note that typically
-you need to have loaded the i2c-dev module.
+The only mandatory configuration parameter.
+
+Device name of the I2C bus to which the sensor is connected. Note that
+typically you need to have loaded the i2c-dev module.
Using i2c-tools you can check/list i2c buses available on your system by:
i2cdetect -l
=item B<Oversampling> I<value>
-For MPL115 this is the size of the averaging window. To filter out sensor noise
-a simple averaging using floating window of configurable size is used. The plugin
-will use average of the last C<value> measurements (value of 1 means no averaging).
-Minimal size is 1, maximal 1024.
+Optional parameter controlling the oversampling/accuracy. Default value
+is 1 providing fastest and least accurate reading.
-For MPL3115 this is the oversampling value. The actual oversampling is performed
-by the sensor and the higher value the higher accuracy and longer conversion time
-(although nothing to worry about in the collectd context). Supported values are:
-1, 2, 4, 8, 16, 32, 64 and 128. Any other value is adjusted by the plugin to
-the closest supported one. Default is 128.
+For I<MPL115> this is the size of the averaging window. To filter out sensor
+noise a simple averaging using floating window of this configurable size is
+used. The plugin will use average of the last C<value> measurements (value of 1
+means no averaging). Minimal size is 1, maximal 1024.
+
+For I<MPL3115> this is the oversampling value. The actual oversampling is
+performed by the sensor and the higher value the higher accuracy and longer
+conversion time (although nothing to worry about in the collectd context).
+Supported values are: 1, 2, 4, 8, 16, 32, 64 and 128. Any other value is
+adjusted by the plugin to the closest supported one.
+
+For I<BMP085> this is the oversampling value. The actual oversampling is
+performed by the sensor and the higher value the higher accuracy and longer
+conversion time (although nothing to worry about in the collectd context).
+Supported values are: 1, 2, 4, 8. Any other value is adjusted by the plugin to
+the closest supported one.
=item B<PressureOffset> I<offset>
-You can further calibrate the sensor by supplying pressure and/or temperature offsets.
-This is added to the measured/caclulated value (i.e. if the measured value is too high
-then use negative offset).
+Optional parameter for MPL3115 only.
+
+You can further calibrate the sensor by supplying pressure and/or temperature
+offsets. This is added to the measured/caclulated value (i.e. if the measured
+value is too high then use negative offset).
In hPa, default is 0.0.
=item B<TemperatureOffset> I<offset>
-You can further calibrate the sensor by supplying pressure and/or temperature offsets.
-This is added to the measured/caclulated value (i.e. if the measured value is too high
-then use negative offset).
+Optional parameter for MPL3115 only.
+
+You can further calibrate the sensor by supplying pressure and/or temperature
+offsets. This is added to the measured/caclulated value (i.e. if the measured
+value is too high then use negative offset).
In C, default is 0.0.
=item B<Normalization> I<method>
-Normalization method - what approximation/model is used to compute mean sea
+Optional parameter, default value is 0.
+
+Normalization method - what approximation/model is used to compute the mean sea
level pressure from the air absolute pressure.
Supported values of the C<method> (integer between from 0 to 2) are:
=over 5
-=item B<0> - no conversion, absolute pressrure is simply copied over. For this method you
+=item B<0> - no conversion, absolute pressure is simply copied over. For this method you
do not need to configure C<Altitude> or C<TemperatureSensor>.
=item B<1> - international formula for conversion ,
-See I<http://en.wikipedia.org/wiki/Atmospheric_pressure#Altitude_atmospheric_pressure_variation>.
-For this method you have to configure C<Altitude> but do not need C<TemperatureSensor>
-(uses fixed global temperature average instead).
+See
+L<http://en.wikipedia.org/wiki/Atmospheric_pressure#Altitude_atmospheric_pressure_variation>.
+For this method you have to configure C<Altitude> but do not need
+C<TemperatureSensor> (uses fixed global temperature average instead).
=item B<2> - formula as recommended by the Deutsche Wetterdienst (German
Meteorological Service).
-See I<http://de.wikipedia.org/wiki/Barometrische_H%C3%B6henformel#Theorie>
-For this method you have to configure both C<Altitude> and C<TemperatureSensor>.
+See L<http://de.wikipedia.org/wiki/Barometrische_H%C3%B6henformel#Theorie>
+For this method you have to configure both C<Altitude> and
+C<TemperatureSensor>.
=back
=item B<TemperatureSensor> I<reference>
-Temperature sensor which should be used as a reference when normalizing the pressure.
-When specified more sensors a minumum is found and uses each time.
-The temperature reading directly from this pressure sensor/plugin
-is typically not suitable as the pressure sensor
-will be probably inside while we want outside temperature.
-The collectd reference name is something like
+Temperature sensor(s) which should be used as a reference when normalizing the
+pressure using C<Normalization> method 2.
+When specified more sensors a minumum is found and used each time. The
+temperature reading directly from this pressure sensor/plugin is typically not
+suitable as the pressure sensor will be probably inside while we want outside
+temperature. The collectd reference name is something like
<hostname>/<plugin_name>-<plugin_instance>/<type>-<type_instance>
-(<type_instance> is usually omitted when there is just single value type).
-Or you can figure it out from the path of the output data files.
+(<type_instance> is usually omitted when there is just single value type). Or
+you can figure it out from the path of the output data files.
=back
=item B<Timeout> I<Milliseconds>
-The B<Timeout> option sets the overall timeout for HTTP requests, in
+The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
milliseconds. By default, the configured B<Interval> is used to set the
timeout.
=item B<Timeout> I<Milliseconds>
-The B<Timeout> option sets the overall timeout for HTTP requests, in
+The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
milliseconds. By default, the configured B<Interval> is used to set the
timeout. Prior to version 5.5.0, there was no timeout and requests could hang
indefinitely. This legacy behaviour can be achieved by setting the value of
=back
+=head2 Plugin C<ipc>
+
+The I<IPC plugin> allows to B<collectd> to gather information about
+process IPC mechanims, like used semaphores, size of shared memory
+segments and others.
+
=head2 Plugin C<ipmi>
=over 4
=item B<Timeout> I<Milliseconds>
-The B<Timeout> option sets the overall timeout for HTTP requests, in
+The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
milliseconds. By default, the configured B<Interval> is used to set the
timeout.
exceed the size of an C<int>, i.e. 2E<nbsp>GByte.
Defaults to C<4096>.
+=item B<LowSpeedLimit> I<Bytes per Second>
+
+Sets the minimal transfer rate in I<Bytes per Second> below which the
+connection with the HTTP server will be considered too slow and aborted. All
+the data submitted over this connection will probably be lost. Defaults to 0,
+which means no minimum transfer rate is enforced.
+
+=item B<Timeout> I<Timeout>
+
+Sets the maximum time in milliseconds given for HTTP POST operations to
+complete. When this limit is reached, the POST operation will be aborted, and
+all the data in the current send buffer will probably be lost. Defaults to 0,
+which means the connection never times out.
+
+The C<write_http> plugin regularly submits the collected values to the HTTP
+server. How frequently this happens depends on how much data you are collecting
+and the size of B<BufferSize>. The optimal value to set B<Timeout> to is
+slightly below this interval, which you can estimate by monitoring the network
+traffic between collectd and the HTTP server.
+
=back
=head2 Plugin C<write_kafka>
=back
+=head2 Plugin C<write_sensu>
+
+The I<write_sensu plugin> will send values to I<Sensu>, a powerful stream
+aggregation and monitoring system. The plugin sends I<JSON> encoded data to
+a local I<Sensu> client using a TCP socket.
+
+At the moment, the I<write_sensu plugin> does not send over a collectd_host
+parameter so it is not possible to use one collectd instance as a gateway for
+others. Each collectd host must pair with one I<Sensu> client.
+
+Synopsis:
+
+ <Plugin "write_sensu">
+ <Node "example">
+ Host "localhost"
+ Port "3030"
+ StoreRates true
+ AlwaysAppendDS false
+ MetricHandler "influx"
+ MetricHandler "default"
+ NotificationHandler "flapjack"
+ NotificationHandler "howling_monkey"
+ Notifications true
+ </Node>
+ Tag "foobar"
+ Attribute "foo" "bar"
+ </Plugin>
+
+The following options are understood by the I<write_sensu plugin>:
+
+=over 4
+
+=item E<lt>B<Node> I<Name>E<gt>
+
+The plugin's configuration consists of one or more B<Node> blocks. Each block
+is given a unique I<Name> and specifies one connection to an instance of
+I<Sensu>. Inside the B<Node> block, the following per-connection options are
+understood:
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<3030>.
+
+=item B<StoreRates> B<true>|B<false>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer number.
+
+This will be reflected in the C<collectd_data_source_type> tag: If
+B<StoreRates> is enabled, converted values will have "rate" appended to the
+data source type, e.g. C<collectd_data_source_type:derive:rate>.
+
+=item B<AlwaysAppendDS> B<false>|B<true>
+
+If set the B<true>, append the name of the I<Data Source> (DS) to the
+"service", i.e. the field that, together with the "host" field, uniquely
+identifies a metric in I<Sensu>. If set to B<false> (the default), this is
+only done when there is more than one DS.
+
+=item B<Notifications> B<false>|B<true>
+
+If set to B<true>, create I<Sensu> events for notifications. This is B<false>
+by default. At least one of B<Notifications> or B<Metrics> should be enabled.
+
+=item B<Metrics> B<false>|B<true>
+
+If set to B<true>, create I<Sensu> events for metrics. This is B<false>
+by default. At least one of B<Notifications> or B<Metrics> should be enabled.
+
+
+=item B<Separator> I<String>
+
+Sets the separator for I<Sensu> metrics name or checks. Defaults to "/".
+
+=item B<MetricHandler> I<String>
+
+Add a handler that will be set when metrics are sent to I<Sensu>. You can add
+several of them, one per line. Defaults to no handler.
+
+=item B<NotificationHandler> I<String>
+
+Add a handler that will be set when notifications are sent to I<Sensu>. You can
+add several of them, one per line. Defaults to no handler.
+
+=item B<EventServicePrefix> I<String>
+
+Add the given string as a prefix to the event service name.
+If B<EventServicePrefix> not set or set to an empty string (""),
+no prefix will be used.
+
+=back
+
+=item B<Tag> I<String>
+
+Add the given string as an additional tag to the metric being sent to
+I<Sensu>.
+
+=item B<Attribute> I<String> I<String>
+
+Consider the two given strings to be the key and value of an additional
+attribute for each metric being sent out to I<Sensu>.
+
+=back
+
=head2 Plugin C<zookeeper>
The I<zookeeper plugin> will collect statistics from a I<Zookeeper> server
projects / collectd.git / blobdiff