Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
will be mostly useless.
+Starting with collectd 4.9, this may also be a block in which further options
+affecting the behavior of B<LoadPlugin> may be specified. The following
+options are allowed inside a B<LoadPlugin> block:
+
+ <LoadPlugin perl>
+ Globals true
+ </LoadPlugin>
+
+=over 4
+
+=item B<Globals> B<true|false>
+
+If enabled, collectd will export all global symbols of the plugin (and of all
+libraries loaded as dependencies of the plugin) and, thus, makes those symbols
+available for resolving unresolved symbols in subsequently loaded plugins if
+that is supported by your system. By default, this is disabled.
+
+This is useful (or possibly even required), e.E<nbsp>g., when loading a plugin
+that embeds some scripting language into the daemon (e.E<nbsp>g. the C<perl>
+or C<python> plugins). Scripting languages usually provide means to load
+extensions written in C. Those extensions require symbols provided by the
+interpreter, which is loaded as a dependency of the respective collectd
+plugin. See the documentation of those plugins (e.E<nbsp>g.,
+L<collectd-perl(5)> or L<collectd-python(5)>) for details.
+
+=back
+
=item B<Include> I<Path>
If I<Path> points to a file, includes that file. If I<Path> points to a
values lead to a higher system load produced by collectd, while higher values
lead to more coarse statistics.
+B<Warning:> You should set this once and then never touch it again. If you do,
+I<you will have to delete all your RRD files> or know some serious RRDtool
+magic! (Assuming you're using the I<RRDtool> or I<RRDCacheD> plugin.)
+
+=item B<Timeout> I<Iterations>
+
+Consider a value list "missing" when no update has been read or received for
+I<Iterations> iterations. By default, I<collectd> considers a value list
+missing when no update has been received for twice the update interval. Since
+this setting uses iterations, the maximum allowed time without update depends
+on the I<Interval> information contained in each value list. This is used in
+the I<Threshold> configuration to dispatch notifications about missing values,
+see L<"THRESHOLD CONFIGURATION"> below.
+
=item B<ReadThreads> I<Num>
Number of threads to start for reading plugins. The default value is B<5>, but
=item B<Hostname> I<Name>
Sets the hostname that identifies a host. If you omit this setting, the
-hostname will be determinded using the L<gethostname(2)> system call.
+hostname will be determined using the L<gethostname(2)> system call.
=item B<FQDNLookup> B<true|false>
=back
-=head2 Plugin C<couchdb>
+=head2 Plugin C<cpufreq>
+
+This plugin doesn't have any options. It reads
+F</sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq> (for the first CPU
+installed) to get the current CPU frequency. If this file does not exist make
+sure B<cpufreqd> (L<http://cpufreqd.sourceforge.net/>) or a similar tool is
+installed and an "cpu governor" (that's a kernel module) is loaded.
+
+=head2 Plugin C<csv>
+
+=over 4
+
+=item B<DataDir> I<Directory>
+
+Set the directory to store CSV-files under. Per default CSV-files are generated
+beneath the daemon's working directory, i.E<nbsp>e. the B<BaseDir>.
+The special strings B<stdout> and B<stderr> can be used to write to the standard
+output and standard error channels, respectively. This, of course, only makes
+much sense when collectd is running in foreground- or non-daemon-mode.
+
+=item B<StoreRates> B<true|false>
+
+If set to B<true>, convert counter values to rates. If set to B<false> (the
+default) counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
+=back
+
+=head2 Plugin C<curl>
+
+The curl plugin uses the B<libcurl> (L<http://curl.haxx.se/>) to read web pages
+and the match infrastructure (the same code used by the tail plugin) to use
+regular expressions with the received data.
+
+The following example will read the current value of AMD stock from Google's
+finance page and dispatch the value to collectd.
+
+ <Plugin curl>
+ <Page "stock_quotes">
+ URL "http://finance.google.com/finance?q=NYSE%3AAMD"
+ User "foo"
+ Password "bar"
+ <Match>
+ Regex "<span +class=\"pr\"[^>]*> *([0-9]*\\.[0-9]+) *</span>"
+ DSType "GaugeAverage"
+ # Note: `stock_value' is not a standard type.
+ Type "stock_value"
+ Instance "AMD"
+ </Match>
+ </Page>
+ </Plugin>
+
+In the B<Plugin> block, there may be one or more B<Page> blocks, each defining
+a web page and one or more "matches" to be performed on the returned data. The
+string argument to the B<Page> block is used as plugin instance.
+
+The following options are valid within B<Page> blocks:
+
+=over 4
+
+=item B<URL> I<URL>
+
+URL of the web site to retrieve. Since a regular expression will be used to
+extract information from this data, non-binary data is a big plus here ;)
+
+=item B<User> I<Name>
+
+Username to use if authorization is required to read the page.
+
+=item B<Password> I<Password>
+
+Password to use if authorization is required to read the page.
+
+=item B<VerifyPeer> B<true>|B<false>
+
+Enable or disable peer SSL certificate verification. See
+L<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.
+
+=item B<VerifyHost> B<true>|B<false>
+
+Enable or disable peer host name verification. If enabled, the plugin checks if
+the C<Common Name> or a C<Subject Alternate Name> field of the SSL certificate
+matches the host name provided by the B<URL> option. If this identity check
+fails, the connection is aborted. Obviously, only works when connecting to a
+SSL enabled server. Enabled by default.
+
+=item B<CACert> I<file>
+
+File that holds one or more SSL certificates. If you want to use HTTPS you will
+possibly need this option. What CA certificates come bundled with C<libcurl>
+and are checked by default depends on the distribution you use.
+
+=item B<MeasureResponseTime> B<true>|B<false>
+
+Measure response time for the request. If this setting is enabled, B<Match>
+blocks (see below) are optional. Disabled by default.
+
+=item B<E<lt>MatchE<gt>>
+
+One or more B<Match> blocks that define how to match information in the data
+returned by C<libcurl>. The C<curl> plugin uses the same infrastructure that's
+used by the C<tail> plugin, so please see the documentation of the C<tail>
+plugin below on how matches are defined. If the B<MeasureResponseTime> option
+is set to B<true>, B<Match> blocks are optional.
+
+=back
+
+=head2 Plugin C<curl_json>
-The couchdb plugin uses B<libcurl> (L<http://curl.haxx.se/>) and B<libyajl>
-(L<http://www.lloydforge.org/projects/yajl/>) to collect values from CouchDB
-documents (stored JSON notation).
+The B<curl_json plugin> uses B<libcurl> (L<http://curl.haxx.se/>) and
+B<libyajl> (L<http://www.lloydforge.org/projects/yajl/>) to retrieve JSON data
+via cURL. This can be used to collect values from CouchDB documents (which are
+stored JSON notation), for example.
The following example will collect several values from the built-in `_stats'
-runtime statistics module (L<http://wiki.apache.org/couchdb/Runtime_Statistics>).
+runtime statistics module of CouchDB
+(L<http://wiki.apache.org/couchdb/Runtime_Statistics>).
- <Plugin couchdb>
+ <Plugin curl_json>
<URL "http://localhost:5984/_stats">
Instance "httpd"
<Key "httpd/requests/count">
</URL>
</Plugin>
+Another CouchDB example:
The following example will collect the status values from each database:
<URL "http://localhost:5984/_all_dbs">
</URL>
In the B<Plugin> block, there may be one or more B<URL> blocks, each defining
-a URL to be fetched via HTTP (libcurl) and one or more B<Key> blocks.
-The B<Key> string argument must be in a path format, of which is used to collect
-a value from a JSON map object. If a B<Key> path element is that of a I<*> wildcard,
-the values for all keys will be collectd.
+a URL to be fetched via HTTP (using libcurl) and one or more B<Key> blocks.
+The B<Key> string argument must be in a path format, which is used to collect a
+value from a JSON map object. If a path element of B<Key> is the
+I<*>E<nbsp>wildcard, the values for all keys will be collectd.
The following options are valid within B<URL> blocks:
=back
-=head2 Plugin C<cpufreq>
-
-This plugin doesn't have any options. It reads
-F</sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq> (for the first CPU
-installed) to get the current CPU frequency. If this file does not exist make
-sure B<cpufreqd> (L<http://cpufreqd.sourceforge.net/>) or a similar tool is
-installed and an "cpu governor" (that's a kernel module) is loaded.
+=head2 Plugin C<curl_xml>
+
+The B<curl_xml plugin> uses B<libcurl> (L<http://curl.haxx.se/>) and B<libxml2>
+(L<http://xmlsoft.org/>) to retrieve XML data via cURL.
+
+ <Plugin "curl_xml">
+ <URL "http://localhost/stats.xml">
+ Host "my_host"
+ Instance "some_instance"
+ User "collectd"
+ Password "thaiNg0I"
+ VerifyPeer true
+ VerifyHost true
+ CACert "/path/to/ca.crt"
+
+ <XPath "table[@id=\"magic_level\"]/tr">
+ Type "magic_level"
+ #InstancePrefix "prefix-"
+ InstanceFrom "td[1]"
+ ValuesFrom "td[2]/span[@class=\"level\"]"
+ </XPath>
+ </URL>
+ </Plugin>
-=head2 Plugin C<csv>
+In the B<Plugin> block, there may be one or more B<URL> blocks, each defining a
+URL to be fetched via HTTP (using libcurl). Within each B<URL> block there are
+options which specify the connection parameters, for example authentication
+information, and one or more B<XPath> blocks.
-=over 4
+Each B<XPath> block specifies how to get one type of information. The
+string argument must be a valid XPath expression which returns a list
+of "base elements". One value is dispatched for each "base element". The
+I<type instance> and values are looked up using further I<XPath> expressions
+that should be relative to the base element.
-=item B<DataDir> I<Directory>
+Within the B<URL> block the following options are accepted:
-Set the directory to store CSV-files under. Per default CSV-files are generated
-beneath the daemon's working directory, i.E<nbsp>e. the B<BaseDir>.
-The special strings B<stdout> and B<stderr> can be used to write to the standard
-output and standard error channels, respectively. This, of course, only makes
-much sense when collectd is running in foreground- or non-daemon-mode.
+=over 4
-=item B<StoreRates> B<true|false>
+=item B<Host> I<Name>
-If set to B<true>, convert counter values to rates. If set to B<false> (the
-default) counter values are stored as is, i.E<nbsp>e. as an increasing integer
-number.
+Use I<Name> as the host name when submitting values. Defaults to the global
+host name setting.
-=back
+=item B<Instance> I<Instance>
-=head2 Plugin C<curl>
+Use I<Instance> as the plugin instance when submitting values. Defaults to an
+empty string (no plugin instance).
-The curl plugin uses the B<libcurl> (L<http://curl.haxx.se/>) to read web pages
-and the match infrastructure (the same code used by the tail plugin) to use
-regular expressions with the received data.
+=item B<User> I<User>
+=item B<Password> I<Password>
+=item B<VerifyPeer> B<true>|B<false>
+=item B<VerifyHost> B<true>|B<false>
+=item B<CACert> I<CA Cert File>
-The following example will read the current value of AMD stock from google's
-finance page and dispatch the value to collectd.
+These options behave exactly equivalent to the appropriate options of the
+I<cURL> and I<cURL-JSON> plugins. Please see there for a detailed description.
- <Plugin curl>
- <Page "stock_quotes">
- URL "http://finance.google.com/finance?q=NYSE%3AAMD"
- User "foo"
- Password "bar"
- <Match>
- Regex "<span +class=\"pr\"[^>]*> *([0-9]*\\.[0-9]+) *</span>"
- DSType "GaugeAverage"
- # Note: `stock_value' is not a standard type.
- Type "stock_value"
- Instance "AMD"
- </Match>
- </Page>
- </Plugin>
+=item E<lt>B<XPath> I<XPath-expression>E<gt>
-In the B<Plugin> block, there may be one or more B<Page> blocks, each defining
-a web page and one or more "matches" to be performed on the returned data. The
-string argument to the B<Page> block is used as plugin instance.
+Within each B<URL> block, there must be one or more B<XPath> blocks. Each
+B<XPath> block specifies how to get one type of information. The string
+argument must be a valid XPath expression which returns a list of "base
+elements". One value is dispatched for each "base element".
-The following options are valid within B<Page> blocks:
+Within the B<XPath> block the following options are accepted:
=over 4
-=item B<URL> I<URL>
-
-URL of the web site to retrieve. Since a regular expression will be used to
-extract information from this data, non-binary data is a big plus here ;)
-
-=item B<User> I<Name>
-
-Username to use if authorization is required to read the page.
-
-=item B<Password> I<Password>
+=item B<Type> I<Type>
-Password to use if authorization is required to read the page.
+Specifies the I<Type> used for submitting patches. This determines the number
+of values that are required / expected and whether the strings are parsed as
+signed or unsigned integer or as double values. See L<types.db(5)> for details.
+This option is required.
-=item B<VerifyPeer> B<true>|B<false>
+=item B<InstancePrefix> I<InstancePrefix>
-Enable or disable peer SSL certificate verification. See
-L<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.
+Prefix the I<type instance> with I<InstancePrefix>. The values are simply
+concatenated together without any separator.
+This option is optional.
-=item B<VerifyHost> B<true>|B<false>
+=item B<InstanceFrom> I<InstanceFrom>
-Enable or disable peer host name verification. If enabled, the plugin checks if
-the C<Common Name> or a C<Subject Alternate Name> field of the SSL certificate
-matches the host name provided by the B<URL> option. If this identity check
-fails, the connection is aborted. Obviously, only works when connecting to a
-SSL enabled server. Enabled by default.
+Specifies a XPath expression to use for determining the I<type instance>. The
+XPath expression must return exactly one element. The element's value is then
+used as I<type instance>, possibly prefixed with I<InstancePrefix> (see above).
-=item B<CACert> I<file>
+This value is required. As a special exception, if the "base XPath expression"
+(the argument to the B<XPath> block) returns exactly one argument, then this
+option may be omitted.
-File that holds one or more SSL certificates. If you want to use HTTPS you will
-possibly need this option. What CA certificates come bundled with C<libcurl>
-and are checked by default depends on the distribution you use.
+=item B<ValuesFrom> I<ValuesFrom> [I<ValuesFrom> ...]
-=item B<E<lt>MatchE<gt>>
+Specifies one or more XPath expression to use for reading the values. The
+number of XPath expressions must match the number of data sources in the
+I<type> specified with B<Type> (see above). Each XPath expression must return
+exactly one element. The element's value is then parsed as a number and used as
+value for the appropriate value in the value list dispatched to the daemon.
-One or more B<Match> blocks that define how to match information in the data
-returned by C<libcurl>. The C<curl> plugin uses the same infrastructure that's
-used by the C<tail> plugin, so please see the documentation of the C<tail>
-plugin below on how matches are defined.
+=back
=back
Query blocks define I<SQL> statements and how the returned data should be
interpreted. They are identified by the name that is given in the opening line
of the block. Thus the name needs to be unique. Other than that, the name is
-not used in collectd.
+not used in collectd.
In each B<Query> block, there is one or more B<Result> blocks. B<Result> blocks
define which column holds which value or instance information. You can use
different syntax. The plugin will use only those queries, where the specified
minimum and maximum versions fit the version of the database in use.
-The database version is determined by C<dbi_conn_get_engine_version>, see the
+The database version is determined by C<dbi_conn_get_engine_version>, see the
L<libdbi documentation|http://libdbi.sourceforge.net/docs/programmers-guide/reference-conn.html#DBI-CONN-GET-ENGINE-VERSION>
for details. Basically, each part of the version is assumed to be in the range
from B<00> to B<99> and all dots are removed. So version "4.1.2" becomes
Select partitions based on the filesystem type.
-=item B<IgnoreSelected> I<true>|I<false>
+=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all partitions B<except> the ones that
match any one of the criteria are collected. By default only selected
partitions are collected if a selection is made. If no selection is configured
at all, B<all> partitions are selected.
-=item B<ReportByDevice> I<true>|I<false>
+=item B<ReportByDevice> B<true>|B<false>
Report using the device name rather than the mountpoint. i.e. with this I<false>,
(the default), it will report a disk as "root", but with it I<true>, it will be
"sda1" (or whichever).
+=item B<ReportReserved> B<true>|B<false>
+
+When enabled, the blocks reserved for root are reported separately. When
+disabled (the default for backwards compatibility reasons) the reserved space
+will be included in the "free" space.
+
+When disabled, the "df" type will be used to store "free" and "used" space. The
+mount point or disk name (see option B<ReportByDevice>) is used as type
+instance in this case (again: backwards compatibility).
+
+When enabled, the type "df_complex" is used and three files are created. The
+mount point or disk name is used as plugin instance and the type instance is
+set to "free", "reserved" and "used" as appropriate.
+
+Enabling this option is recommended.
+
+=item B<ReportInodes> B<true>|B<false>
+
+Enables or disables reporting of free, reserved and used inodes. Defaults to
+inode collection being disabled.
+
+Enable this option if inodes are a scarce resource for you, usually because
+many small files are stored on the disk. This is a usual scenario for mail
+transfer agents and web caches.
+
=back
=head2 Plugin C<disk>
=item B<Interface> I<Interface>
-The dns plugin uses B<libpcap> to capture dns traffic and analyses it. This
+The dns plugin uses B<libpcap> to capture dns traffic and analyzes it. This
option sets the interface that should be used. If this option is not set, or
set to "any", the plugin will try to get packets from B<all> interfaces. This
may not work on certain platforms, such as MacE<nbsp>OSE<nbsp>X.
Controls whether or not to recurse into subdirectories. Enabled by default.
+=item B<IncludeHidden> I<true>|I<false>
+
+Controls whether or not to include "hidden" files and directories in the count.
+"Hidden" files and directories are those, whose name begins with a dot.
+Defaults to I<false>, i.e. by default hidden files and directories are ignored.
+
=back
+=head2 Plugin C<GenericJMX>
+
+The I<GenericJMX plugin> is written in I<Java> and therefore documented in
+L<collectd-java(5)>.
+
=head2 Plugin C<gmond>
The I<gmond> plugin received the multicast traffic sent by B<gmond>, the
Prefix all lines printed by the current time. Defaults to B<true>.
+=item B<PrintSeverity> B<true>|B<false>
+
+When enabled, all lines are prefixed by the severity of the log message, for
+example "warning". Defaults to B<false>.
+
=back
B<Note>: There is no need to notify the daemon after moving or removing the
Sets the server address to connect to when querying the page. Must be inside a
B<Page> block.
-=item B<Key> I<Key>
+=item B<Key> I<Key>
+
+When connected to the memcached server, asks for the page I<Key>.
+
+=item E<lt>B<Match>E<gt>
+
+Match blocks define which strings to look for and how matches substrings are
+interpreted. For a description of match blocks, please see L<"Plugin tail">.
+
+=back
+
+=head2 Plugin C<memcached>
+
+The C<memcached plugin> connects to a memcached server and queries statistics
+about cache utilization, memory and bandwidth used.
+L<http://www.danga.com/memcached/>
+
+=over 4
+
+=item B<Host> I<Hostname>
+
+Hostname to connect to. Defaults to B<127.0.0.1>.
+
+=item B<Port> I<Port>
+
+TCP-Port to connect to. Defaults to B<11211>.
+
+=back
+
+=head2 Plugin C<modbus>
+
+The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
+register values. It supports reading single registers (unsigned 16E<nbsp>bit
+values), large integer values (unsigned 32E<nbsp>bit values) and floating point
+values (two registers interpreted as IEEE floats in big endian notation).
+
+Synopsis:
+
+ <Data "voltage-input-1">
+ RegisterBase 0
+ RegisterType float
+ Type voltage
+ Instance "input-1"
+ </Data>
+
+ <Data "voltage-input-2">
+ RegisterBase 2
+ RegisterType float
+ Type voltage
+ Instance "input-2"
+ </Data>
+
+ <Host "modbus.example.com">
+ Address "192.168.0.42"
+ Port "502"
+ Interval 60
+
+ <Slave 1>
+ Instance "power-supply"
+ Collect "voltage-input-1"
+ Collect "voltage-input-2"
+ </Slave>
+ </Host>
+
+=over 4
+
+=item E<lt>B<Data> I<Name>E<gt> blocks
+
+Data blocks define a mapping between register numbers and the "types" used by
+I<collectd>.
+
+Within E<lt>DataE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<RegisterBase> I<Number>
+
+Configures the base register to read from the device. If the option
+B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
+register will be read (the register number is increased by one).
+
+=item B<RegisterType> B<Uint16>|B<Uint32>|B<Float>
+
+Specifies what kind of data is returned by the device. If the type is B<Uint32>
+or B<Float>, two 16E<nbsp>bit registers will be read and the data is combined
+into one value. Defaults to B<Uint16>.
+
+=item B<Type> I<Type>
+
+Specifies the "type" (data set) to use when dispatching the value to
+I<collectd>. Currently, only data sets with exactly one data source are
+supported.
+
+=item B<Instance> I<Instance>
+
+Sets the type instance to use when dispatching the value to I<collectd>. If
+unset, an empty string (no type instance) is used.
+
+=back
+
+=item E<lt>B<Host> I<Name>E<gt> blocks
+
+Host blocks are used to specify to which hosts to connect and what data to read
+from their "slaves". The string argument I<Name> is used as hostname when
+dispatching the values to I<collectd>.
+
+Within E<lt>HostE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Address> I<Hostname>
+
+Specifies the node name (the actual network address) used to connect to the
+host. This may be an IP address or a hostname. Please note that the used
+I<libmodbus> library only supports IPv4 at the moment.
+
+=item B<Port> I<Service>
+
+Specifies the port used to connect to the host. The port can either be given as
+a number or as a service name. Please note that the I<Service> argument must be
+a string, even if ports are given in their numerical form. Defaults to "502".
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+host. By default the global B<Interval> setting will be used.
+
+=item E<lt>B<Slave> I<ID>E<gt>
+
+Over each TCP connection, multiple Modbus devices may be reached. The slave ID
+is used to specify which device should be addressed. For each device you want
+to query, one B<Slave> block must be given.
+
+Within E<lt>SlaveE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Instance> I<Instance>
+
+Specify the plugin instance to use when dispatching the values to I<collectd>.
+By default "slave_I<ID>" is used.
+
+=item B<Collect> I<DataName>
+
+Specifies which data to retrieve from the device. I<DataName> must be the same
+string as the I<Name> argument passed to a B<Data> block. You can specify this
+option multiple times to collect more than one value from a slave. At least one
+B<Collect> option is mandatory.
+
+=back
+
+=back
+
+=back
+
+=head2 Plugin C<mysql>
+
+The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
+one or more databases when started and keeps the connection up as long as
+possible. When the connection is interrupted for whatever reason it will try
+to re-connect. The plugin will complaint loudly in case anything goes wrong.
+
+This plugin issues the MySQL C<SHOW STATUS> / C<SHOW GLOBAL STATUS> command
+and collects information about MySQL network traffic, executed statements,
+requests, the query cache and threads by evaluating the
+C<Bytes_{received,sent}>, C<Com_*>, C<Handler_*>, C<Qcache_*> and C<Threads_*>
+return values. Please refer to the B<MySQL reference manual>, I<5.1.6. Server
+Status Variables> for an explanation of these values.
+
+Optionally, master and slave statistics may be collected in a MySQL
+replication setup. In that case, information about the synchronization state
+of the nodes are collected by evaluating the C<Position> return value of the
+C<SHOW MASTER STATUS> command and the C<Seconds_Behind_Master>,
+C<Read_Master_Log_Pos> and C<Exec_Master_Log_Pos> return values of the
+C<SHOW SLAVE STATUS> command. See the B<MySQL reference manual>,
+I<12.5.5.21 SHOW MASTER STATUS Syntax> and
+I<12.5.5.31 SHOW SLAVE STATUS Syntax> for details.
+
+Synopsis:
+
+ <Plugin mysql>
+ <Database foo>
+ Host "hostname"
+ User "username"
+ Password "password"
+ Port "3306"
+ MasterStats true
+ </Database>
+
+ <Database bar>
+ Host "localhost"
+ Socket "/var/run/mysql/mysqld.sock"
+ SlaveStats true
+ SlaveNotifications true
+ </Database>
+ </Plugin>
+
+A B<Database> block defines one connection to a MySQL database. It accepts a
+single argument which specifies the name of the database. None of the other
+options are required. MySQL will use default values as documented in the
+section "mysql_real_connect()" in the B<MySQL reference manual>.
+
+=over 4
+
+=item B<Host> I<Hostname>
+
+Hostname of the database server. Defaults to B<localhost>.
+
+=item B<User> I<Username>
+
+Username to use when connecting to the database. The user does not have to be
+granted any privileges (which is synonym to granting the C<USAGE> privilege).
+Any existing MySQL user will do.
+
+=item B<Password> I<Password>
+
+Password needed to log into the database.
+
+=item B<Database> I<Database>
+
+Select this database. Defaults to I<no database> which is a perfectly reasonable
+option for what this plugin does.
+
+=item B<Port> I<Port>
+
+TCP-port to connect to. The port must be specified in its numeric form, but it
+must be passed as a string nonetheless. For example:
+
+ Port "3306"
+
+If B<Host> is set to B<localhost> (the default), this setting has no effect.
+See the documentation for the C<mysql_real_connect> function for details.
+
+=item B<Socket> I<Socket>
+
+Specifies the path to the UNIX domain socket of the MySQL server. This option
+only has any effect, if B<Host> is set to B<localhost> (the default).
+Otherwise, use the B<Port> option above. See the documentation for the
+C<mysql_real_connect> function for details.
+
+=item B<MasterStats> I<true|false>
+
+=item B<SlaveStats> I<true|false>
+
+Enable the collection of master / slave statistics in a replication setup.
+
+=item B<SlaveNotifications> I<true|false>
+
+If enabled, the plugin sends a notification if the replication slave I/O and /
+or SQL threads are not running.
+
+=back
+
+=head2 Plugin C<netapp>
+
+The netapp plugin can collect various performance and capacity information
+from a NetApp filer using the NetApp API.
+
+Please note that NetApp has a wide line of products and a lot of different
+software versions for each of these products. This plugin was developed for a
+NetApp FAS3040 running OnTap 7.2.3P8 and tested on FAS2050 7.3.1.1L1,
+FAS3140 7.2.5.1 and FAS3020 7.2.4P9. It I<should> work for most combinations of
+model and software version but it is very hard to test this.
+If you have used this plugin with other models and/or software version, feel
+free to send us a mail to tell us about the results, even if it's just a short
+"It works".
+
+To collect these data collectd will log in to the NetApp via HTTP(S) and HTTP
+basic authentication.
+
+B<Do not use a regular user for this!> Create a special collectd user with just
+the minimum of capabilities needed. The user only needs the "login-http-admin"
+capability as well as a few more depending on which data will be collected.
+Required capabilities are documented below.
+
+=head3 Synopsis
+
+ <Plugin "netapp">
+ <Host "netapp1.example.com">
+ Protocol "https"
+ Address "10.0.0.1"
+ Port 443
+ User "username"
+ Password "aef4Aebe"
+ Interval 30
+
+ <WAFL>
+ Interval 30
+ GetNameCache true
+ GetDirCache true
+ GetBufferCache true
+ GetInodeCache true
+ </WAFL>
+
+ <Disks>
+ Interval 30
+ GetBusy true
+ </Disks>
+
+ <VolumePerf>
+ Interval 30
+ GetIO "volume0"
+ IgnoreSelectedIO false
+ GetOps "volume0"
+ IgnoreSelectedOps false
+ GetLatency "volume0"
+ IgnoreSelectedLatency false
+ </VolumePerf>
+
+ <VolumeUsage>
+ Interval 30
+ GetCapacity "vol0"
+ GetCapacity "vol1"
+ IgnoreSelectedCapacity false
+ GetSnapshot "vol1"
+ GetSnapshot "vol3"
+ IgnoreSelectedSnapshot false
+ </VolumeUsage>
+
+ <System>
+ Interval 30
+ GetCPULoad true
+ GetInterfaces true
+ GetDiskOps true
+ GetDiskIO true
+ </System>
+ </Host>
+ </Plugin>
+
+The netapp plugin accepts the following configuration options:
+
+=over 4
+
+=item B<Host> I<Name>
+
+A host block defines one NetApp filer. It will appear in collectd with the name
+you specify here which does not have to be its real name nor its hostname.
+
+=item B<Protocol> B<httpd>|B<http>
+
+The protocol collectd will use to query this host.
+
+Optional
+
+Type: string
+
+Default: https
+
+Valid options: http, https
+
+=item B<Address> I<Address>
+
+The hostname or IP address of the host.
+
+Optional
+
+Type: string
+
+Default: The "host" block's name.
+
+=item B<Port> I<Port>
+
+The TCP port to connect to on the host.
+
+Optional
+
+Type: integer
+
+Default: 80 for protocol "http", 443 for protocol "https"
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+The username and password to use to login to the NetApp.
+
+Mandatory
+
+Type: string
+
+=item B<Interval> I<Interval>
+
+B<TODO>
+
+=back
+
+The following options decide what kind of data will be collected. You can
+either use them as a block and fine tune various parameters inside this block,
+use them as a single statement to just accept all default values, or omit it to
+not collect any data.
+
+The following options are valid inside all blocks:
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect the respective statistics every I<Seconds> seconds. Defaults to the
+host specific setting.
+
+=back
+
+=head3 The System block
+
+This will collect various performance data about the whole system.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetCPULoad> B<true>|B<false>
+
+If you set this option to true the current CPU usage will be read. This will be
+the average usage between all CPUs in your NetApp without any information about
+individual CPUs.
+
+B<Note:> These are the same values that the NetApp CLI command "sysstat"
+returns in the "CPU" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: Two value lists of type "cpu", and type instances "idle" and "system".
+
+=item B<GetInterfaces> B<true>|B<false>
+
+If you set this option to true the current traffic of the network interfaces
+will be read. This will be the total traffic over all interfaces of your NetApp
+without any information about individual interfaces.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "Net kB/s" field.
+
+B<Or is it?>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "if_octects".
+
+=item B<GetDiskIO> B<true>|B<false>
+
+If you set this option to true the current IO throughput will be read. This
+will be the total IO of your NetApp without any information about individual
+disks, volumes or aggregates.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "DiskE<nbsp>kB/s" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "disk_octets".
+
+=item B<GetDiskOps> B<true>|B<false>
+
+If you set this option to true the current number of HTTP, NFS, CIFS, FCP,
+iSCSI, etc. operations will be read. This will be the total number of
+operations on your NetApp without any information about individual volumes or
+aggregates.
+
+B<Note:> These are the same values that the NetApp CLI command "sysstat"
+returns in the "NFS", "CIFS", "HTTP", "FCP" and "iSCSI" fields.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: A variable number of value lists of type "disk_ops_complex". Each type
+of operation will result in one value list with the name of the operation as
+type instance.
+
+=back
+
+=head3 The WAFL block
+
+This will collect various performance data about the WAFL file system. At the
+moment this just means cache performance.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+B<Note:> The interface to get these values is classified as "Diagnostics" by
+NetApp. This means that it is not guaranteed to be stable even between minor
+releases.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetNameCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance
+"name_cache_hit".
+
+=item B<GetDirCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance "find_dir_hit".
+
+=item B<GetInodeCache> B<true>|B<false>
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance
+"inode_cache_hit".
+
+=item B<GetBufferCache> B<true>|B<false>
+
+B<Note:> This is the same value that the NetApp CLI command "sysstat" returns
+in the "Cache hit" field.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "cache_ratio" and type instance "buf_hash_hit".
+
+=back
+
+=head3 The Disks block
+
+This will collect performance data about the individual disks in the NetApp.
+
+B<Note:> To get this data the collectd user needs the
+"api-perf-object-get-instances" capability.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect disk statistics every I<Seconds> seconds.
+
+=item B<GetBusy> B<true>|B<false>
+
+If you set this option to true the busy time of all disks will be calculated
+and the value of the busiest disk in the system will be written.
+
+B<Note:> This is the same values that the NetApp CLI command "sysstat" returns
+in the "Disk util" field. Probably.
+
+Optional
+
+Type: boolean
+
+Default: true
+
+Result: One value list of type "percent" and type instance "disk_busy".
+
+=back
+
+=head3 The VolumePerf block
+
+This will collect various performance data about the individual volumes.
-When connected to the memcached server, asks for the page I<Key>.
+You can select which data to collect about which volume using the following
+options. They follow the standard ignorelist semantic.
-=item E<lt>B<Match>E<gt>
+B<Note:> To get this data the collectd user needs the
+I<api-perf-object-get-instances> capability.
-Match blocks define which strings to look for and how matches substrings are
-interpreted. For a description of match blocks, please see L<"Plugin tail">.
+=over 4
-=back
+=item B<Interval> I<Seconds>
-=head2 Plugin C<memcached>
+Collect volume performance data every I<Seconds> seconds.
-The C<memcached plugin> connects to a memcached server and queries statistics
-about cache utilization, memory and bandwidth used.
-L<http://www.danga.com/memcached/>
+=item B<GetIO> I<Volume>
-=over 4
+=item B<GetOps> I<Volume>
-=item B<Host> I<Hostname>
+=item B<GetLatency> I<Volume>
-Hostname to connect to. Defaults to B<127.0.0.1>.
+Select the given volume for IO, operations or latency statistics collection.
+The argument is the name of the volume without the C</vol/> prefix.
-=item B<Port> I<Port>
+Since the standard ignorelist functionality is used here, you can use a string
+starting and ending with a slash to specify regular expression matching: To
+match the volumes "vol0", "vol2" and "vol7", you can use this regular
+expression:
-TCP-Port to connect to. Defaults to B<11211>.
+ GetIO "/^vol[027]$/"
-=back
+If no regular expression is specified, an exact match is required. Both,
+regular and exact matching are case sensitive.
-=head2 Plugin C<mysql>
+If no volume was specified at all for either of the three options, that data
+will be collected for all available volumes.
-The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
-one or more databases when started and keeps the connection up as long as
-possible. When the connection is interrupted for whatever reason it will try
-to re-connect. The plugin will complaint loudly in case anything goes wrong.
+=item B<IgnoreSelectedIO> B<true>|B<false>
-This plugin issues the MySQL C<SHOW STATUS> / C<SHOW GLOBAL STATUS> command
-and collects information about MySQL network traffic, executed statements,
-requests, the query cache and threads by evaluating the
-C<Bytes_{received,sent}>, C<Com_*>, C<Handler_*>, C<Qcache_*> and C<Threads_*>
-return values. Please refer to the B<MySQL reference manual>, I<5.1.6. Server
-Status Variables> for an explanation of these values.
+=item B<IgnoreSelectedOps> B<true>|B<false>
-Optionally, master and slave statistics may be collected in a MySQL
-replication setup. In that case, information about the synchronization state
-of the nodes are collected by evaluating the C<Position> return value of the
-C<SHOW MASTER STATUS> command and the C<Seconds_Behind_Master>,
-C<Read_Master_Log_Pos> and C<Exec_Master_Log_Pos> return values of the
-C<SHOW SLAVE STATUS> command. See the B<MySQL reference manual>,
-I<12.5.5.21 SHOW MASTER STATUS Syntax> and
-I<12.5.5.31 SHOW SLAVE STATUS Syntax> for details.
+=item B<IgnoreSelectedLatency> B<true>|B<false>
-Synopsis:
+When set to B<true>, the volumes selected for IO, operations or latency
+statistics collection will be ignored and the data will be collected for all
+other volumes.
- <Plugin mysql>
- <Database foo>
- Host "hostname"
- User "username"
- Password "password"
- Port "3306"
- MasterStats true
- </Database>
+When set to B<false>, data will only be collected for the specified volumes and
+all other volumes will be ignored.
- <Database bar>
- Host "localhost"
- Socket "/var/run/mysql/mysqld.sock"
- SlaveStats true
- SlaveNotifications true
- </Database>
- </Plugin>
+If no volumes have been specified with the above B<Get*> options, all volumes
+will be collected regardless of the B<IgnoreSelected*> option.
-A B<Database> block defines one connection to a MySQL database. It accepts a
-single argument which specifies the name of the database. None of the other
-options are required. MySQL will use default values as documented in the
-section "mysql_real_connect()" in the B<MySQL reference manual>.
+Defaults to B<false>
-=over 4
+=back
-=item B<Host> I<Hostname>
+=head3 The VolumeUsage block
-Hostname of the database server. Defaults to B<localhost>.
+This will collect capacity data about the individual volumes.
-=item B<User> I<Username>
+B<Note:> To get this data the collectd user needs the I<api-volume-list-info>
+capability.
-Username to use when connecting to the database. The user does not have to be
-granted any privileges (which is synonym to granting the C<USAGE> privilege).
-Any existing MySQL user will do.
+=over 4
-=item B<Password> I<Password>
+=item B<Interval> I<Seconds>
-Password needed to log into the database.
+Collect volume usage statistics every I<Seconds> seconds.
-=item B<Database> I<Database>
+=item B<GetCapacity> I<VolumeName>
-Select this database. Defaults to I<no database> which is a perfectly reasonable
-option for what this plugin does.
+The current capacity of the volume will be collected. This will result in two
+to four value lists, depending on the configuration of the volume. All data
+sources are of type "df_complex" with the name of the volume as
+plugin_instance.
-=item B<Port> I<Port>
+There will be type_instances "used" and "free" for the number of used and
+available bytes on the volume. If the volume has some space reserved for
+snapshots, a type_instance "snap_reserved" will be available. If the volume
+has SIS enabled, a type_instance "sis_saved" will be available. This is the
+number of bytes saved by the SIS feature.
-TCP-port to connect to. The port must be specified in its numeric form, but it
-must be passed as a string nonetheless. For example:
+B<Note:> The current NetApp API has a bug that results in this value being
+reported as a 32E<nbsp>bit number. This plugin tries to guess the correct
+number which works most of the time. If you see strange values here, bug
+NetApp support to fix this.
- Port "3306"
+Repeat this option to specify multiple volumes.
-If B<Host> is set to B<localhost> (the default), this setting has no effect.
-See the documentation for the C<mysql_real_connect> function for details.
+=item B<IgnoreSelectedCapacity> B<true>|B<false>
-=item B<Socket> I<Socket>
+Specify whether to collect only the volumes selected by the B<GetCapacity>
+option or to ignore those volumes. B<IgnoreSelectedCapacity> defaults to
+B<false>. However, if no B<GetCapacity> option is specified at all, all
+capacities will be selected anyway.
-Specifies the path to the UNIX domain socket of the MySQL server. This option
-only has any effect, if B<Host> is set to B<localhost> (the default).
-Otherwise, use the B<Port> option above. See the documentation for the
-C<mysql_real_connect> function for details.
+=item B<GetSnapshot> I<VolumeName>
-=item B<MasterStats> I<true|false>
+Select volumes from which to collect snapshot information.
-=item B<SlaveStats> I<true|false>
+Usually, the space used for snapshots is included in the space reported as
+"used". If snapshot information is collected as well, the space used for
+snapshots is subtracted from the used space.
-Enable the collection of master / slave statistics in a replication setup.
+To make things even more interesting, it is possible to reserve space to be
+used for snapshots. If the space required for snapshots is less than that
+reserved space, there is "reserved free" and "reserved used" space in addition
+to "free" and "used". If the space required for snapshots exceeds the reserved
+space, that part allocated in the normal space is subtracted from the "used"
+space again.
-=item B<SlaveNotifications> I<true|false>
+Repeat this option to specify multiple volumes.
-If enabled, the plugin sends a notification if the replication slave I/O and /
-or SQL threads are not running.
+=item B<IgnoreSelectedSnapshot>
+
+Specify whether to collect only the volumes selected by the B<GetSnapshot>
+option or to ignore those volumes. B<IgnoreSelectedSnapshot> defaults to
+B<false>. However, if no B<GetSnapshot> option is specified at all, all
+capacities will be selected anyway.
=back
=item B<IgnoreSelected>
-The behaviour is the same as with all other similar plugins: If nothing is
+The behavior is the same as with all other similar plugins: If nothing is
selected at all, everything is collected. If some things are selected using the
options described above, only these statistics are collected. If you set
B<IgnoreSelected> to B<true>, this behavior is inverted, i.E<nbsp>e. the
The Network plugin sends data to a remote instance of collectd, receives data
from a remote instance, or both at the same time. Data which has been received
-from the network is usually not transmitted again, but this can be actived, see
+from the network is usually not transmitted again, but this can be activated, see
the B<Forward> option below.
The default IPv6 multicast group is C<ff18::efc0:4a42>. The default IPv4
This feature is only available if the I<network> plugin was linked with
I<libgcrypt>.
+=item B<Interface> I<Interface name>
+
+Set the outgoing interface for IP packets. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is to let the kernel choose the appropriate interface. Be warned
+that the manual selection of an interface for unicast traffic is only
+necessary in rare cases.
+
=back
=item B<E<lt>Listen> I<Host> [I<Port>]B<E<gt>>
using L<stat(2)>. If the file has been changed, the contents is re-read. While
the file is being read, it is locked using L<fcntl(2)>.
+=item B<Interface> I<Interface name>
+
+Set the incoming interface for IP packets explicitly. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is, to let the kernel choose the appropriate interface. Thus incoming
+traffic gets only accepted, if it arrives on the given interface.
+
=back
=item B<TimeToLive> I<1-255>
1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
either.
+=item B<ReportStats> B<true>|B<false>
+
+The network plugin cannot only receive and send statistics, it can also create
+statistics about itself. Collected data included the number of received and
+sent octets and packets, the length of the receive queue and the number of
+values handled. When set to B<true>, the I<Network plugin> will make these
+statistics available. Defaults to B<false>.
+
=back
=head2 Plugin C<nginx>
=item B<ReverseLookups> B<true>|B<false>
-Sets wether or not to perform reverse lookups on peers. Since the name or
+Sets whether or not to perform reverse lookups on peers. Since the name or
IP-address may be used in a filename it is recommended to disable reverse
lookups. The default is to do reverse lookups to preserve backwards
compatibility, though.
Specifies the location of the status file.
+=item B<ImprovedNamingSchema> B<true>|B<false>
+
+When enabled, the filename of the status file will be used as plugin instance
+and the client's "common name" will be used as type instance. This is required
+when reading multiple status files. Enabling this option is recommended, but to
+maintain backwards compatibility this option is disabled by default.
+
+=item B<CollectCompression> B<true>|B<false>
+
+Sets whether or not statistics about the compression used by OpenVPN should be
+collected. This information is only available in I<single> mode. Enabled by
+default.
+
+=item B<CollectIndividualUsers> B<true>|B<false>
+
+Sets whether or not traffic information is collected for each connected client
+individually. If set to false, currently no traffic data is collected at all
+because aggregating this data in a save manner is tricky. Defaults to B<true>.
+
+=item B<CollectUserCount> B<true>|B<false>
+
+When enabled, the number of currently connected clients or users is collected.
+This is especially interesting when B<CollectIndividualUsers> is disabled, but
+can be configured independently from that option. Defaults to B<false>.
+
=back
=head2 Plugin C<oracle>
This plugin embeds a Perl-interpreter into collectd and provides an interface
to collectd's plugin system. See L<collectd-perl(5)> for its documentation.
+=head2 Plugin C<pinba>
+
+The I<Pinba plugin> receives profiling information from I<Pinba>, an extension
+for the I<PHP> interpreter. At the end of executing a script, i.e. after a
+PHP-based webpage has been delivered, the extension will send a UDP packet
+containing timing information, peak memory usage and so on. The plugin will
+wait for such packets, parse them and account the provided information, which
+is then dispatched to the daemon once per interval.
+
+Synopsis:
+
+ <Plugin pinba>
+ Address "::0"
+ Port "30002"
+ # Overall statistics for the website.
+ <View "www-total">
+ Server "www.example.com"
+ </View>
+ # Statistics for www-a only
+ <View "www-a">
+ Host "www-a.example.com"
+ Server "www.example.com"
+ </View>
+ # Statistics for www-b only
+ <View "www-b">
+ Host "www-b.example.com"
+ Server "www.example.com"
+ </View>
+ </Plugin>
+
+The plugin provides the following configuration options:
+
+=over 4
+
+=item B<Address> I<Node>
+
+Configures the address used to open a listening socket. By default, plugin will
+bind to the I<any> address C<::0>.
+
+=item B<Port> I<Service>
+
+Configures the port (service) to bind to. By default the default Pinba port
+"30002" will be used. The option accepts service names in addition to port
+numbers and thus requires a I<string> argument.
+
+=item E<lt>B<View> I<Name>E<gt> block
+
+The packets sent by the Pinba extension include the hostname of the server, the
+server name (the name of the virtual host) and the script that was executed.
+Using B<View> blocks it is possible to separate the data into multiple groups
+to get more meaningful statistics. Each packet is added to all matching groups,
+so that a packet may be accounted for more than once.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Matches the hostname of the system the webserver / script is running on. This
+will contain the result of the L<gethostname(2)> system call. If not
+configured, all hostnames will be accepted.
+
+=item B<Server> I<Server>
+
+Matches the name of the I<virtual host>, i.e. the contents of the
+C<$_SERVER["SERVER_NAME"]> variable when within PHP. If not configured, all
+server names will be accepted.
+
+=item B<Script> I<Script>
+
+Matches the name of the I<script name>, i.e. the contents of the
+C<$_SERVER["SCRIPT_NAME"]> variable when within PHP. If not configured, all
+script names will be accepted.
+
+=back
+
+=back
+
=head2 Plugin C<ping>
The I<Ping> plugin starts a new thread which sends ICMP "ping" packets to the
Sets the Time-To-Live of generated ICMP packets.
+=item B<SourceAddress> I<host>
+
+Sets the source address to use. I<host> may either be a numerical network
+address or a network hostname.
+
+=item B<Device> I<name>
+
+Sets the outgoing network device to be used. I<name> has to specify an
+interface name (e.E<nbsp>g. C<eth0>). This might not be supported by all
+operating systems.
+
+=item B<MaxMissed> I<Packets>
+
+Trigger a DNS resolve after the host has not replied to I<Packets> packets. This
+enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
+
+Default: B<-1> (disabled)
+
=back
=head2 Plugin C<postgresql>
</Database>
<Database bar>
+ Interval 300
Service "service_name"
Query backend # predefined
Query rt36_tickets
=item I<interval>
-The interval collectd is using (as specified by the B<Interval> option).
+The interval with which this database is queried (as specified by the database
+specific or global B<Interval> options).
=back
=over 4
+=item B<Interval> I<seconds>
+
+Specify the interval with which the database should be queried. The default is
+to use the global B<Interval> setting.
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
Select more detailed statistics of processes matching this name. The statistics
collected for these selected processes are size of the resident segment size
(RSS), user- and system-time used, number of processes and number of threads,
-and minor and major pagefaults.
+io data (where available) and minor and major pagefaults.
=item B<ProcessMatch> I<name> I<regex>
=back
+=head2 Plugin C<python>
+
+This plugin embeds a Python-interpreter into collectd and provides an interface
+to collectd's plugin system. See L<collectd-python(5)> for its documentation.
+
+=head2 Plugin C<routeros>
+
+The C<routeros> plugin connects to a device running I<RouterOS>, the
+Linux-based operating system for routers by I<MikroTik>. The plugin uses
+I<librouteros> to connect and reads information about the interfaces and
+wireless connections of the device. The configuration supports querying
+multiple routers:
+
+ <Plugin "routeros">
+ <Router>
+ Host "router0.example.com"
+ User "collectd"
+ Password "secr3t"
+ CollectInterface true
+ CollectCPULoad true
+ CollectMemory true
+ </Router>
+ <Router>
+ Host "router1.example.com"
+ User "collectd"
+ Password "5ecret"
+ CollectInterface true
+ CollectRegistrationTable true
+ CollectDF true
+ CollectDisk true
+ </Router>
+ </Plugin>
+
+As you can see above, the configuration of the I<routeros> plugin consists of
+one or more B<E<lt>RouterE<gt>> blocks. Within each block, the following
+options are understood:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the router to connect to.
+
+=item B<Port> I<Port>
+
+Port name or port number used when connecting. If left unspecified, the default
+will be chosen by I<librouteros>, currently "8728". This option expects a
+string argument, even when a numeric port number is given.
+
+=item B<User> I<User>
+
+Use the user name I<User> to authenticate. Defaults to "admin".
+
+=item B<Password> I<Password>
+
+Set the password used to authenticate.
+
+=item B<CollectInterface> B<true>|B<false>
+
+When set to B<true>, interface statistics will be collected for all interfaces
+present on the device. Defaults to B<false>.
+
+=item B<CollectRegistrationTable> B<true>|B<false>
+
+When set to B<true>, information about wireless LAN connections will be
+collected. Defaults to B<false>.
+
+=item B<CollectCPULoad> B<true>|B<false>
+
+When set to B<true>, information about the CPU usage will be collected. The
+number is a dimensionless value where zero indicates no CPU usage at all.
+Defaults to B<false>.
+
+=item B<CollectMemory> B<true>|B<false>
+
+When enabled, the amount of used and free memory will be collected. How used
+memory is calculated is unknown, for example whether or not caches are counted
+as used space.
+Defaults to B<false>.
+
+=item B<CollectDF> B<true>|B<false>
+
+When enabled, the amount of used and free disk space will be collected.
+Defaults to B<false>.
+
+=item B<CollectDisk> B<true>|B<false>
+
+When enabled, the number of sectors written and bad blocks will be collected.
+Defaults to B<false>.
+
+=back
+
=head2 Plugin C<rrdcached>
The C<rrdcached> plugin uses the RRDtool accelerator daemon, L<rrdcached(1)>,
</Match>
<Match>
Regex "\\<R=local_user\\>"
+ ExcludeRegex "\\<R=local_user\\>.*mail_spool defer"
DSType "CounterInc"
Type "counter"
Instance "local_user"
Regex "SPAM \\(Score: (-?[0-9]+\\.[0-9]+)\\)"
+=item B<ExcludeRegex> I<regex>
+
+Sets an optional regular expression to use for excluding lines from the match.
+An example which excludes all connections from localhost from the match:
+
+ ExcludeRegex "127\\.0\\.0\\.1"
+
=item B<DSType> I<Type>
Sets how the values are cumulated. I<Type> is one of:
=item B<CounterSet>
-The matched number is a counter. Simply sets the internal counter to this
-value.
+=item B<DeriveSet>
+
+=item B<AbsoluteSet>
+
+The matched number is a counter. Simply I<sets> the internal counter to this
+value. Variants exist for C<COUNTER>, C<DERIVE>, and C<ABSOLUTE> data sources.
=item B<CounterAdd>
-Add the matched value to the internal counter.
+=item B<DeriveAdd>
+
+Add the matched value to the internal counter. In case of B<DeriveAdd>, the
+matched number may be negative, which will effectively subtract from the
+internal counter.
=item B<CounterInc>
-Increase the internal counter by one. This B<DSType> is the only one that does
-not use the matched subexpression, but simply counts the number of matched
+=item B<DeriveInc>
+
+Increase the internal counter by one. These B<DSType> are the only ones that do
+not use the matched subexpression, but simply count the number of matched
lines. Thus, you may use a regular expression without submatch in this case.
=back
As you'd expect the B<Gauge*> types interpret the submatch as a floating point
-number, using L<strtod(3)>. The B<CounterSet> and B<CounterAdd> interpret the
-submatch as an integer using L<strtoll(3)>. B<CounterInc> does not use the
-submatch at all and it may be omitted in this case.
+number, using L<strtod(3)>. The B<Counter*> and B<AbsoluteSet> types interpret
+the submatch as an unsigned integer using L<strtoull(3)>. The B<Derive*> types
+interpret the submatch as a signed integer using L<strtoll(3)>. B<CounterInc>
+and B<DeriveInc> do not use the submatch at all and it may be omitted in this
+case.
=item B<Type> I<Type>
=head2 Plugin C<tokyotyrant>
-The C<tokyotyrant plugin> connects to a TokyoTyrant server and collects a
+The C<tokyotyrant plugin> connects to a TokyoTyrant server and collects a
couple metrics: number of records, and database size on disk.
=over 4
collect on-wire traffic you could, for example, use the logging facilities of
iptables to feed data for the guest IPs into the iptables plugin.
+=head2 Plugin C<write_http>
+
+This output plugin submits values to an http server by POST them using the
+PUTVAL plain-text protocol. Each destination you want to post data to needs to
+have one B<URL> block, within which the destination can be configured further,
+for example by specifying authentication data.
+
+Synopsis:
+
+ <Plugin "write_http">
+ <URL "http://example.com/post-collectd">
+ User "collectd"
+ Password "weCh3ik0"
+ </URL>
+ </Plugin>
+
+B<URL> blocks need one string argument which is used as the URL to which data
+is posted. The following options are understood within B<URL> blocks.
+
+=over 4
+
+=item B<User> I<Username>
+
+Optional user name needed for authentication.
+
+=item B<Password> I<Password>
+
+Optional password needed for authentication.
+
+=item B<VerifyPeer> B<true>|B<false>
+
+Enable or disable peer SSL certificate verification. See
+L<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.
+
+=item B<VerifyHost> B<true|false>
+
+Enable or disable peer host name verification. If enabled, the plugin checks if
+the C<Common Name> or a C<Subject Alternate Name> field of the SSL certificate
+matches the host name provided by the B<URL> option. If this identity check
+fails, the connection is aborted. Obviously, only works when connecting to a
+SSL enabled server. Enabled by default.
+
+=item B<CACert> I<File>
+
+File that holds one or more SSL certificates. If you want to use HTTPS you will
+possibly need this option. What CA certificates come bundled with C<libcurl>
+and are checked by default depends on the distribution you use.
+
+=item B<Format> B<Command>|B<JSON>
+
+Format of the output to generate. If set to B<Command>, will create output that
+is understood by the I<Exec> and I<UnixSock> plugins. When set to B<JSON>, will
+create output in the I<JavaScript Object Notation> (JSON).
+
+Defaults to B<Command>.
+
+=item B<StoreRates> B<true|false>
+
+If set to B<true>, convert counter values to rates. If set to B<false> (the
+default) counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
+=back
+
=head1 THRESHOLD CONFIGURATION
Starting with version C<4.3.0> collectd has support for B<monitoring>. By that
Also, all values that match a threshold are considered to be relevant or
"interesting". As a consequence collectd will issue a notification if they are
-not received for twice the last timeout of the values. If, for example, some
-hosts sends it's CPU statistics to the server every 60 seconds, a notification
-will be dispatched after about 120 seconds. It may take a little longer because
-the timeout is checked only once each B<Interval> on the server.
+not received for B<Timeout> iterations. The B<Timeout> configuration option is
+explained in section L<"GLOBAL OPTIONS">. If, for example, B<Timeout> is set to
+"2" (the default) and some hosts sends it's CPU statistics to the server every
+60 seconds, a notification will be dispatched after about 120 seconds. It may
+take a little longer because the timeout is checked only once each B<Interval>
+on the server.
When a value comes within range again or is received after it was missing, an
"OKAY-notification" is dispatched.
=back
-=head2 Built-in targets
+=head2 Built-in targets
The following targets are built into the core daemon and therefore need no
plugins to be loaded:
the identifier of a value. If multiple regular expressions are given, B<all>
regexen must match for a value to match.
+=item B<Invert> B<false>|B<true>
+
+When set to B<true>, the result of the match is inverted, i.e. all value lists
+where all regular expressions apply are not matched, all other value lists are
+matched. Defaults to B<false>.
+
=back
Example:
usually), the graph will be empty (NAN) for a long time. People may not
understand why.
+=item B<hashed>
+
+Calculates a hash value of the host name and matches values according to that
+hash value. This makes it possible to divide all hosts into groups and match
+only values that are in a specific group. The intended use is in load
+balancing, where you want to handle only part of all data and leave the rest
+for other servers.
+
+The hashing function used tries to distribute the hosts evenly. First, it
+calculates a 32E<nbsp>bit hash value using the characters of the hostname:
+
+ hash_value = 0;
+ for (i = 0; host[i] != 0; i++)
+ hash_value = (hash_value * 251) + host[i];
+
+The constant 251 is a prime number which is supposed to make this hash value
+more random. The code then checks the group for this host according to the
+I<Total> and I<Match> arguments:
+
+ if ((hash_value % Total) == Match)
+ matches;
+ else
+ does not match;
+
+Please note that when you set I<Total> to two (i.E<nbsp>e. you have only two
+groups), then the least significant bit of the hash value will be the XOR of
+all least significant bits in the host name. One consequence is that when you
+have two hosts, "server0.example.com" and "server1.example.com", where the host
+name differs in one digit only and the digits differ by one, those hosts will
+never end up in the same group.
+
+Available options:
+
+=over 4
+
+=item B<Match> I<Match> I<Total>
+
+Divide the data into I<Total> groups and match all hosts in group I<Match> as
+described above. The groups are numbered from zero, i.E<nbsp>e. I<Match> must
+be smaller than I<Total>. I<Total> must be at least one, although only values
+greater than one really do make any sense.
+
+You can repeat this option to match multiple groups, for example:
+
+ Match 3 7
+ Match 5 7
+
+The above config will divide the data into seven groups and match groups three
+and five. One use would be to keep every value on two hosts so that if one
+fails the missing data can later be reconstructed from the second host.
+
+=back
+
+Example:
+
+ # Operate on the pre-cache chain, so that ignored values are not even in the
+ # global cache.
+ <Chain "PreCache">
+ <Rule>
+ <Match "hashed">
+ # Divide all received hosts in seven groups and accept all hosts in
+ # group three.
+ Match 3 7
+ </Match>
+ # If matched: Return and continue.
+ Target "return"
+ </Rule>
+ # If not matched: Return and stop.
+ Target "stop"
+ </Chain>
+
=back
=head2 Available targets
projects / collectd.git / blobdiff