=item B<MeasureResponseTime> B<true>|B<false>
-Measure response time for the request. Disabled by default.
+Measure response time for the request. If this setting is enabled, B<Match>
+blocks (see below) are optional. Disabled by default.
=item B<E<lt>MatchE<gt>>
One or more B<Match> blocks that define how to match information in the data
returned by C<libcurl>. The C<curl> plugin uses the same infrastructure that's
used by the C<tail> plugin, so please see the documentation of the C<tail>
-plugin below on how matches are defined.
+plugin below on how matches are defined. If the B<MeasureResponseTime> option
+is set to B<true>, B<Match> blocks are optional.
=back
=back
+=head2 Plugin C<curl_xml>
+
+The B<curl_xml plugin> uses B<libcurl> (L<http://curl.haxx.se/>) and B<libxml2>
+(L<http://xmlsoft.org/>) to retrieve XML data via cURL.
+
+ <Plugin "curl_xml">
+ <URL "http://localhost/stats.xml">
+ Host "my_host"
+ Instance "some_instance"
+ User "collectd"
+ Password "thaiNg0I"
+ VerifyPeer true
+ VerifyHost true
+ CACert "/path/to/ca.crt"
+
+ <XPath "table[@id=\"magic_level\"]/tr">
+ Type "magic_level"
+ #InstancePrefix "prefix-"
+ InstanceFrom "td[1]"
+ ValuesFrom "td[2]/span[@class=\"level\"]"
+ </XPath>
+ </URL>
+ </Plugin>
+
+In the B<Plugin> block, there may be one or more B<URL> blocks, each defining a
+URL to be fetched via HTTP (using libcurl). Within each B<URL> block there are
+options which specify the connection parameters, for example authentication
+information, and one or more B<XPath> blocks.
+
+Each B<XPath> block specifies how to get one type of information. The
+string argument must be a valid XPath expression which returns a list
+of "base elements". One value is dispatched for each "base element". The
+I<type instance> and values are looked up using further I<XPath> expressions
+that should be relative to the base element.
+
+Within the B<URL> block the following options are accepted:
+
+=over 4
+
+=item B<Host> I<Name>
+
+Use I<Name> as the host name when submitting values. Defaults to the global
+host name setting.
+
+=item B<Instance> I<Instance>
+
+Use I<Instance> as the plugin instance when submitting values. Defaults to an
+empty string (no plugin instance).
+
+=item B<User> I<User>
+=item B<Password> I<Password>
+=item B<VerifyPeer> B<true>|B<false>
+=item B<VerifyHost> B<true>|B<false>
+=item B<CACert> I<CA Cert File>
+
+These options behave exactly equivalent to the appropriate options of the
+I<cURL> and I<cURL-JSON> plugins. Please see there for a detailed description.
+
+=item E<lt>B<XPath> I<XPath-expression>E<gt>
+
+Within each B<URL> block, there must be one or more B<XPath> blocks. Each
+B<XPath> block specifies how to get one type of information. The string
+argument must be a valid XPath expression which returns a list of "base
+elements". One value is dispatched for each "base element".
+
+Within the B<XPath> block the following options are accepted:
+
+=over 4
+
+=item B<Type> I<Type>
+
+Specifies the I<Type> used for submitting patches. This determines the number
+of values that are required / expected and whether the strings are parsed as
+signed or unsigned integer or as double values. See L<types.db(5)> for details.
+This option is required.
+
+=item B<InstancePrefix> I<InstancePrefix>
+
+Prefix the I<type instance> with I<InstancePrefix>. The values are simply
+concatenated together without any separator.
+This option is optional.
+
+=item B<InstanceFrom> I<InstanceFrom>
+
+Specifies a XPath expression to use for determining the I<type instance>. The
+XPath expression must return exactly one element. The element's value is then
+used as I<type instance>, possibly prefixed with I<InstancePrefix> (see above).
+
+This value is required. As a special exception, if the "base XPath expression"
+(the argument to the B<XPath> block) returns exactly one argument, then this
+option may be omitted.
+
+=item B<ValuesFrom> I<ValuesFrom> [I<ValuesFrom> ...]
+
+Specifies one or more XPath expression to use for reading the values. The
+number of XPath expressions must match the number of data sources in the
+I<type> specified with B<Type> (see above). Each XPath expression must return
+exactly one element. The element's value is then parsed as a number and used as
+value for the appropriate value in the value list dispatched to the daemon.
+
+=back
+
+=back
+
=head2 Plugin C<dbi>
This plugin uses the B<dbi> library (L<http://libdbi.sourceforge.net/>) to
Controls whether or not to recurse into subdirectories. Enabled by default.
+=item B<IncludeHidden> I<true>|I<false>
+
+Controls whether or not to include "hidden" files and directories in the count.
+"Hidden" files and directories are those, whose name begins with a dot.
+Defaults to I<false>, i.e. by default hidden files and directories are ignored.
+
=back
=head2 Plugin C<GenericJMX>
The netapp plugin can collect various performance and capacity informations
from a NetApp filer using the NetApp API.
+Please note that NetApp has a wide line of products and a lot of different
+software versions for each of these products. This plugin was developed for a
+NetApp FAS3040 running OnTap 7.2.3P8 and tested on FAS2050 7.3.1.1L1,
+FAS3140 7.2.5.1 and FAS3020 7.2.4P9. It I<should> work for most combinations of
+model and software version but it is very hard to test this.
+If you have used this plugin with other models and/or software version, feel
+free to send us a mail to tell us about the results, even if it's just a short
+"It works".
+
To collect these data collectd will log in to the NetApp via HTTP(S) and HTTP
basic authentication.
Specifies the location of the status file.
+=item B<Compression> B<true>|B<false>
+
+Sets whether or not statistics about the compression used by OpenVPN should be
+collected. This information is only available in I<single> mode. Enabled by
+default.
+
=back
=head2 Plugin C<oracle>
Sets the Time-To-Live of generated ICMP packets.
+=item B<SourceAddress> I<host>
+
+Sets the source address to use. I<host> may either be a numerical network
+address or a network hostname.
+
+=item B<Device> I<name>
+
+Sets the outgoing network device to be used. I<name> has to specify an
+interface name (e.E<nbsp>g. C<eth0>). This might not be supported by all
+operating systems.
+
+=item B<MaxMissed> I<Packets>
+
+Trigger a DNS resolv after the host has not replied to I<Packets> packets. This
+enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
+
+Default: B<-1> (disabled)
+
=back
=head2 Plugin C<postgresql>
Select more detailed statistics of processes matching this name. The statistics
collected for these selected processes are size of the resident segment size
(RSS), user- and system-time used, number of processes and number of threads,
-and minor and major pagefaults.
+io data (where available) and minor and major pagefaults.
=item B<ProcessMatch> I<name> I<regex>
=back
+=head2 Plugin C<python>
+
+This plugin embeds a Python-interpreter into collectd and provides an interface
+to collectd's plugin system. See L<collectd-python(5)> for its documentation.
+
+=head2 Plugin C<routeros>
+
+The C<routeros> plugin connects to a device running I<RouterOS>, the
+Linux-based operating system for routers by I<MikroTik>. The plugin uses
+I<librouteros> to connect and reads information about the interfaces and
+wireless connections of the device. The configuration supports querying
+multiple routers:
+
+ <Plugin "routeros">
+ <Router>
+ Host "router0.example.com"
+ User "collectd"
+ Password "secr3t"
+ CollectInterface true
+ CollectCPULoad true
+ CollectMemory true
+ </Router>
+ <Router>
+ Host "router1.example.com"
+ User "collectd"
+ Password "5ecret"
+ CollectInterface true
+ CollectRegistrationTable true
+ CollectDF true
+ CollectDisk true
+ </Router>
+ </Plugin>
+
+As you can see above, the configuration of the I<routeros> plugin consists of
+one or more B<E<lt>RouterE<gt>> blocks. Within each block, the following
+options are understood:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the router to connect to.
+
+=item B<Port> I<Port>
+
+Port name or port number used when connecting. If left unspecified, the default
+will be chosen by I<librouteros>, currently "8728". This option expects a
+string argument, even when a numeric port number is given.
+
+=item B<User> I<User>
+
+Use the user name I<User> to authenticate. Defaults to "admin".
+
+=item B<Password> I<Password>
+
+Set the password used to authenticate.
+
+=item B<CollectInterface> B<true>|B<false>
+
+When set to B<true>, interface statistics will be collected for all interfaces
+present on the device. Defaults to B<false>.
+
+=item B<CollectRegistrationTable> B<true>|B<false>
+
+When set to B<true>, information about wireless LAN connections will be
+collected. Defaults to B<false>.
+
+=item B<CollectCPULoad> B<true>|B<false>
+
+When set to B<true>, information about the CPU usage will be collected. The
+number is a dimensionless value where zero indicates no CPU usage at all.
+Defaults to B<false>.
+
+=item B<CollectMemory> B<true>|B<false>
+
+When enabled, the amount of used and free memory will be collected. How used
+memory is calculated is unknown, for example whether or not caches are counted
+as used space.
+Defaults to B<false>.
+
+=item B<CollectDF> B<true>|B<false>
+
+When enabled, the amount of used and free disk space will be collected.
+Defaults to B<false>.
+
+=item B<CollectDisk> B<true>|B<false>
+
+When enabled, the number of sectors written and bad blocks will be collected.
+Defaults to B<false>.
+
+=back
+
=head2 Plugin C<rrdcached>
The C<rrdcached> plugin uses the RRDtool accelerator daemon, L<rrdcached(1)>,
projects / collectd.git / blobdiff