Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
will be mostly useless.
+Starting with collectd 4.9, this may also be a block in which further options
+affecting the behavior of B<LoadPlugin> may be specified. The following
+options are allowed inside a B<LoadPlugin> block:
+
+ <LoadPlugin perl>
+ Globals true
+ </LoadPlugin>
+
+=over 4
+
+=item B<Globals> B<true|false>
+
+If enabled, collectd will export all global symbols of the plugin (and of all
+libraries loaded as dependencies of the plugin) and, thus, makes those symbols
+available for resolving unresolved symbols in subsequently loaded plugins if
+that is supported by your system. By default, this is disabled.
+
+This is useful (or possibly even required), e.E<nbsp>g., when loading a plugin
+that embeds some scripting language into the daemon (e.E<nbsp>g. the C<perl>
+or C<python> plugins). Scripting languages usually provide means to load
+extensions written in C. Those extensions require symbols provided by the
+interpreter, which is loaded as a dependency of the respective collectd
+plugin. See the documentation of those plugins (e.E<nbsp>g.,
+L<collectd-perl(5)> or L<collectd-python(5)>) for details.
+
+=back
+
=item B<Include> I<Path>
If I<Path> points to a file, includes that file. If I<Path> points to a
values lead to a higher system load produced by collectd, while higher values
lead to more coarse statistics.
+=item B<Timeout> I<Iterations>
+
+Consider a value list "missing" when no update has been read or received for
+I<Iterations> iterations. By default, I<collectd> considers a value list
+missing when no update has been received for twice the update interval. Since
+this setting uses iterations, the maximum allowed time without update depends
+on the I<Interval> information contained in each value list. This is used in
+the I<Threshold> configuration to dispatch notifications about missing values,
+see L<"THRESHOLD CONFIGURATION"> below.
+
=item B<ReadThreads> I<Num>
Number of threads to start for reading plugins. The default value is B<5>, but
If B<Hostname> is determined automatically this setting controls whether or not
the daemon should try to figure out the "fully qualified domain name", FQDN.
-This is done using a lookup of the name returned by C<gethostname>.
-
-Using this feature (i.E<nbsp>e. setting this option to B<true>) is recommended.
-However, to preserve backwards compatibility the default is set to B<false>.
-The sample config file that is installed with C<makeE<nbsp>install> includes a
-line which sets this option, though, so that default installations will have
-this setting enabled.
+This is done using a lookup of the name returned by C<gethostname>. This option
+is enabled by default.
=item B<PreCacheChain> I<ChainName>
(the default), it will report a disk as "root", but with it I<true>, it will be
"sda1" (or whichever).
-=item B<ReportReserved> B<true>|B<false>
-
-When enabled, the blocks reserved for root are reported separately. When
-disabled (the default for backwards compatibility reasons) the reserved space
-will be included in the "free" space.
-
-When disabled, the "df" type will be used to store "free" and "used" space. The
-mount point or disk name (see option B<ReportByDevice>) is used as type
-instance in this case (again: backwards compatibility).
-
-When enabled, the type "df_complex" is used and three files are created. The
-mount point or disk name is used as plugin instance and the type instance is
-set to "free", "reserved" and "used" as appropriate.
-
-Enabling this option is recommended.
-
=item B<ReportInodes> B<true>|B<false>
Enables or disables reporting of free, reserved and used inodes. Defaults to
TCP-Port to connect to. Defaults to B<7634>.
-=item B<TranslateDevicename> I<true>|I<false>
-
-If enabled, translate the disk names to major/minor device numbers
-(e.E<nbsp>g. "8-0" for /dev/sda). For backwards compatibility this defaults to
-I<true> but it's recommended to disable it as it will probably be removed in
-the next major version.
-
=back
=head2 Plugin C<interface>
means to concatenate the guest name and UUID (with a literal colon character
between, thus I<"foo:1234-1234-1234-1234">).
+=item B<InterfaceFormat> B<name>|B<address>
+
+When the libvirt plugin logs interface data, it sets the name of the collected
+data according to this setting. The default is to use the path as provided by
+the hypervisor (the "dev" property of the target node), which is equal to
+setting B<name>.
+
+B<address> means use the interface's mac address. This is useful since the
+interface path might change between reboots of a guest or across migrations.
+
=back
=head2 Plugin C<logfile>
=back
+=head2 Plugin C<modbus>
+
+The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
+register values. It supports reading single registers (unsigned 16E<nbsp>bit
+values), large integer values (unsigned 32E<nbsp>bit values) and floating point
+values (two registers interpreted as IEEE floats in big endian notation).
+
+Synopsis:
+
+ <Data "voltage-input-1">
+ RegisterBase 0
+ RegisterType float
+ Type voltage
+ Instance "input-1"
+ </Data>
+
+ <Data "voltage-input-2">
+ RegisterBase 2
+ RegisterType float
+ Type voltage
+ Instance "input-2"
+ </Data>
+
+ <Host "modbus.example.com">
+ Address "192.168.0.42"
+ Port "502"
+ Interval 60
+
+ <Slave 1>
+ Instance "power-supply"
+ Collect "voltage-input-1"
+ Collect "voltage-input-2"
+ </Slave>
+ </Host>
+
+=over 4
+
+=item E<lt>B<Data> I<Name>E<gt> blocks
+
+Data blocks define a mapping between register numbers and the "types" used by
+I<collectd>.
+
+Within E<lt>DataE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<RegisterBase> I<Number>
+
+Configures the base register to read from the device. If the option
+B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
+register will be read (the register number is increased by one).
+
+=item B<RegisterType> B<Uint16>|B<Uint32>|B<Float>
+
+Specifies what kind of data is returned by the device. If the type is B<Uint32>
+or B<Float>, two 16E<nbsp>bit registers will be read and the data is combined
+into one value. Defaults to B<Uint16>.
+
+=item B<Type> I<Type>
+
+Specifies the "type" (data set) to use when dispatching the value to
+I<collectd>. Currently, only data sets with exactly one data source are
+supported.
+
+=item B<Instance> I<Instance>
+
+Sets the type instance to use when dispatching the value to I<collectd>. If
+unset, an empty string (no type instance) is used.
+
+=back
+
+=item E<lt>B<Host> I<Name>E<gt> blocks
+
+Host blocks are used to specify to which hosts to connect and what data to read
+from their "slaves". The string argument I<Name> is used as hostname when
+dispatching the values to I<collectd>.
+
+Within E<lt>HostE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Address> I<Hostname>
+
+Specifies the node name (the actual network address) used to connect to the
+host. This may be an IP address or a hostname. Please note that the used
+I<libmodbus> library only supports IPv4 at the moment.
+
+=item B<Port> I<Service>
+
+Specifies the port used to connect to the host. The port can either be given as
+a number or as a service name. Please note that the I<Service> argument must be
+a string, even if ports are given in their numerical form. Defaults to "502".
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+host. By default the global B<Interval> setting will be used.
+
+=item E<lt>B<Slave> I<ID>E<gt>
+
+Over each TCP connection, multiple Modbus devices may be reached. The slave ID
+is used to specify which device should be addressed. For each device you want
+to query, one B<Slave> block must be given.
+
+Within E<lt>SlaveE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Instance> I<Instance>
+
+Specify the plugin instance to use when dispatching the values to I<collectd>.
+By default "slave_I<ID>" is used.
+
+=item B<Collect> I<DataName>
+
+Specifies which data to retrieve from the device. I<DataName> must be the same
+string as the I<Name> argument passed to a B<Data> block. You can specify this
+option multiple times to collect more than one value from a slave. At least one
+B<Collect> option is mandatory.
+
+=back
+
+=back
+
+=back
+
=head2 Plugin C<mysql>
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
one or more databases when started and keeps the connection up as long as
possible. When the connection is interrupted for whatever reason it will try
-to re-connect. The plugin will complaint loudly in case anything goes wrong.
+to re-connect. The plugin will complain loudly in case anything goes wrong.
This plugin issues the MySQL C<SHOW STATUS> / C<SHOW GLOBAL STATUS> command
and collects information about MySQL network traffic, executed statements,
This feature is only available if the I<network> plugin was linked with
I<libgcrypt>.
+=item B<Interface> I<Interface name>
+
+Set the outgoing interface for IP packets. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is to let the kernel choose the appropriate interface. Be warned
+that the manual selection of an interface for unicast traffic is only
+necessary in rare cases.
+
=back
=item B<E<lt>Listen> I<Host> [I<Port>]B<E<gt>>
using L<stat(2)>. If the file has been changed, the contents is re-read. While
the file is being read, it is locked using L<fcntl(2)>.
+=item B<Interface> I<Interface name>
+
+Set the incoming interface for IP packets explicitly. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is, to let the kernel choose the appropriate interface. Thus incoming
+traffic gets only accepted, if it arrives on the given interface.
+
=back
=item B<TimeToLive> I<1-255>
necessary it's not a huge problem since the plugin has a duplicate detection,
so the values will not loop.
-=item B<CacheFlush> I<Seconds>
-
-For each host/plugin/type combination the C<network plugin> caches the time of
-the last value being sent or received. Every I<Seconds> seconds the plugin
-searches and removes all entries that are older than I<Seconds> seconds, thus
-freeing the unused memory again. Since this process is somewhat expensive and
-normally doesn't do much, this value should not be too small. The default is
-1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
-either.
-
=item B<ReportStats> B<true>|B<false>
The network plugin cannot only receive and send statistics, it can also create
=item B<CollectUserCount> B<true>|B<false>
When enabled, the number of currently connected clients or users is collected.
-This is expecially interesting when B<CollectIndividualUsers> is disabled, but
+This is especially interesting when B<CollectIndividualUsers> is disabled, but
can be configured independently from that option. Defaults to B<false>.
=back
This plugin embeds a Perl-interpreter into collectd and provides an interface
to collectd's plugin system. See L<collectd-perl(5)> for its documentation.
+=head2 Plugin C<pinba>
+
+The I<Pinba plugin> receives profiling information from I<Pinba>, an extension
+for the I<PHP> interpreter. At the end of executing a script, i.e. after a
+PHP-based webpage has been delivered, the extension will send a UDP packet
+containing timing information, peak memory usage and so on. The plugin will
+wait for such packets, parse them and account the provided information, which
+is then dispatched to the daemon once per interval.
+
+Synopsis:
+
+ <Plugin pinba>
+ Address "::0"
+ Port "30002"
+ # Overall statistics for the website.
+ <View "www-total">
+ Server "www.example.com"
+ </View>
+ # Statistics for www-a only
+ <View "www-a">
+ Host "www-a.example.com"
+ Server "www.example.com"
+ </View>
+ # Statistics for www-b only
+ <View "www-b">
+ Host "www-b.example.com"
+ Server "www.example.com"
+ </View>
+ </Plugin>
+
+The plugin provides the following configuration options:
+
+=over 4
+
+=item B<Address> I<Node>
+
+Configures the address used to open a listening socket. By default, plugin will
+bind to the I<any> address C<::0>.
+
+=item B<Port> I<Service>
+
+Configures the port (service) to bind to. By default the default Pinba port
+"30002" will be used. The option accepts service names in addition to port
+numbers and thus requires a I<string> argument.
+
+=item E<lt>B<View> I<Name>E<gt> block
+
+The packets sent by the Pinba extension include the hostname of the server, the
+server name (the name of the virtual host) and the script that was executed.
+Using B<View> blocks it is possible to separate the data into multiple groups
+to get more meaningful statistics. Each packet is added to all matching groups,
+so that a packet may be accounted for more than once.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Matches the hostname of the system the webserver / script is running on. This
+will contain the result of the L<gethostname(2)> system call. If not
+configured, all hostnames will be accepted.
+
+=item B<Server> I<Server>
+
+Matches the name of the I<virtual host>, i.e. the contents of the
+C<$_SERVER["SERVER_NAME"]> variable when within PHP. If not configured, all
+server names will be accepted.
+
+=item B<Script> I<Script>
+
+Matches the name of the I<script name>, i.e. the contents of the
+C<$_SERVER["SCRIPT_NAME"]> variable when within PHP. If not configured, all
+script names will be accepted.
+
+=back
+
+=back
+
=head2 Plugin C<ping>
The I<Ping> plugin starts a new thread which sends ICMP "ping" packets to the
=item B<MaxMissed> I<Packets>
-Trigger a DNS resolv after the host has not replied to I<Packets> packets. This
+Trigger a DNS resolv
e after the host has not replied to I<Packets> packets. This
enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
Default: B<-1> (disabled)
</Database>
<Database bar>
+ Interval 300
Service "service_name"
Query backend # predefined
Query rt36_tickets
The returned lines will be handled separately one after another.
-=item B<Query> I<sql query statement>
-
-This is a deprecated synonym for B<Statement>. It will be removed in version 5
-of collectd.
-
=item B<Param> I<hostname>|I<database>|I<username>|I<interval>
Specify the parameters which should be passed to the SQL query. The parameters
=item I<interval>
-The interval collectd is using (as specified by the B<Interval> option).
+The interval with which this database is queried (as specified by the database
+specific or global B<Interval> options).
=back
times. If multiple B<ValuesFrom> options are specified, the columns are read
in the given order.
-=item B<Column> I<type> [I<type instance>]
-
-This is a deprecated alternative to a B<Result> block. It will be removed in
-version 5 of collectd. It is equivalent to the following B<Result> block:
-
- <Result>
- Type I<type>
- InstancePrefix I<type instance>
- ValuesFrom I<name of the x. column>
- </Result>
-
-The order of the B<Column> options defines which columns of the query result
-should be used. The first option specifies the data found in the first column,
-the second option that of the second column, and so on.
-
=item B<MinVersion> I<version>
=item B<MaxVersion> I<version>
and patch-level versions, each represented as two-decimal-digit numbers. For
example, version 8.2.3 will become 80203.
-=item B<MinPGVersion> I<version>
-
-=item B<MaxPGVersion> I<version>
-
-These are deprecated synonyms for B<MinVersion> and B<MaxVersion>
-respectively. They will be removed in version 5 of collectd.
-
=back
The following predefined queries are available (the definitions can be found
=over 4
+=item B<Interval> I<seconds>
+
+Specify the interval with which the database should be queried. The default is
+to use the global B<Interval> setting.
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
=back
+=head2 Plugin C<redis>
+
+The I<Redis plugin> connects to one or more Redis servers and gathers
+information about each server's state. For each server there is a I<Node> block
+which configures the connection parameters for this node.
+
+ <Plugin redis>
+ <Node "example">
+ Host "localhost"
+ Port "6379"
+ Timeout 2000
+ </Node>
+ </Plugin>
+
+The information shown in the synopsis above is the I<default configuration>
+which is used by the plugin if no configuration is present.
+
+=over 4
+
+=item B<Node> I<Nodename>
+
+The B<Node> block identifies a new Redis node, that is a new Redis instance
+running in an specified host and port. The name for node is a canonical
+identifier which is used as I<plugin instance>. It is limited to
+64E<nbsp>characters in length.
+
+=item B<Host> I<Hostname>
+
+The B<Host> option is the hostname or IP-address where the Redis instance is
+running on.
+
+=item B<Port> I<Port>
+
+The B<Port> option is the TCP port on which the Redis instance accepts
+connections. Either a service name of a port number may be given. Please note
+that numerical port numbers must be given as a string, too.
+
+=item B<Timeout> I<Timeout in miliseconds>
+
+The B<Timeout> option set the socket timeout for node response. Since the Redis
+read function is blocking, you should keep this value as low as possible. Keep
+in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
+than B<Interval> defined globally.
+
+=back
+
=head2 Plugin C<rrdcached>
The C<rrdcached> plugin uses the RRDtool accelerator daemon, L<rrdcached(1)>,
=item B<CounterSet>
-The matched number is a counter. Simply sets the internal counter to this
-value.
+=item B<DeriveSet>
+
+=item B<AbsoluteSet>
+
+The matched number is a counter. Simply I<sets> the internal counter to this
+value. Variants exist for C<COUNTER>, C<DERIVE>, and C<ABSOLUTE> data sources.
=item B<CounterAdd>
-Add the matched value to the internal counter.
+=item B<DeriveAdd>
+
+Add the matched value to the internal counter. In case of B<DeriveAdd>, the
+matched number may be negative, which will effectively subtract from the
+internal counter.
=item B<CounterInc>
-Increase the internal counter by one. This B<DSType> is the only one that does
-not use the matched subexpression, but simply counts the number of matched
+=item B<DeriveInc>
+
+Increase the internal counter by one. These B<DSType> are the only ones that do
+not use the matched subexpression, but simply count the number of matched
lines. Thus, you may use a regular expression without submatch in this case.
=back
As you'd expect the B<Gauge*> types interpret the submatch as a floating point
-number, using L<strtod(3)>. The B<CounterSet> and B<CounterAdd> interpret the
-submatch as an integer using L<strtoll(3)>. B<CounterInc> does not use the
-submatch at all and it may be omitted in this case.
+number, using L<strtod(3)>. The B<Counter*> and B<AbsoluteSet> types interpret
+the submatch as an unsigned integer using L<strtoull(3)>. The B<Derive*> types
+interpret the submatch as a signed integer using L<strtoll(3)>. B<CounterInc>
+and B<DeriveInc> do not use the submatch at all and it may be omitted in this
+case.
=item B<Type> I<Type>
=back
+=head2 Plugin C<varnish>
+
+The Varnish plugin collects information about Varnish, an HTTP accelerator.
+
+=over 4
+
+=item B<CollectCache> B<true>|B<false>
+
+Cache hits and misses. True by default.
+
+=item B<CollectConnections> B<true>|B<false>
+
+Number of client connections received, accepted and dropped. True by default.
+
+=item B<CollectBackend> B<true>|B<false>
+
+Back-end connection statistics, such as successful, reused,
+and closed connections. True by default.
+
+=item B<CollectSHM> B<true>|B<false>
+
+Statistics about the shared memory log, a memory region to store
+log messages which is flushed to disk when full. True by default.
+
+=item B<CollectESI> B<true>|B<false>
+
+Edge Side Includes (ESI) parse statistics. False by default.
+
+=item B<CollectFetch> B<true>|B<false>
+
+Statistics about fetches (HTTP requests sent to the backend). False by default.
+
+=item B<CollectHCB> B<true>|B<false>
+
+Inserts and look-ups in the crit bit tree based hash. Look-ups are
+divided into locked and unlocked look-ups. False by default.
+
+=item B<CollectSMA> B<true>|B<false>
+
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
+The umem storage component is Solaris specific. False by default.
+
+=item B<CollectSMS> B<true>|B<false>
+
+synth (synthetic content) storage statistics. This storage
+component is used internally only. False by default.
+
+=item B<CollectSM> B<true>|B<false>
+
+file (memory mapped file) storage statistics. False by default.
+
+=item B<CollectTotals> B<true>|B<false>
+
+Collects overview counters, such as the number of sessions created,
+the number of requests and bytes transferred. False by default.
+
+=item B<CollectWorkers> B<true>|B<false>
+
+Collect statistics about worker threads. False by default.
+
+=back
+
=head2 Plugin C<vmem>
The C<vmem> plugin collects information about the usage of virtual memory.
Also, all values that match a threshold are considered to be relevant or
"interesting". As a consequence collectd will issue a notification if they are
-not received for twice the last timeout of the values. If, for example, some
-hosts sends it's CPU statistics to the server every 60 seconds, a notification
-will be dispatched after about 120 seconds. It may take a little longer because
-the timeout is checked only once each B<Interval> on the server.
+not received for B<Timeout> iterations. The B<Timeout> configuration option is
+explained in section L<"GLOBAL OPTIONS">. If, for example, B<Timeout> is set to
+"2" (the default) and some hosts sends it's CPU statistics to the server every
+60 seconds, a notification will be dispatched after about 120 seconds. It may
+take a little longer because the timeout is checked only once each B<Interval>
+on the server.
When a value comes within range again or is received after it was missing, an
"OKAY-notification" is dispatched.
WarningMin 100000000
</Type>
</Plugin>
+
+ <Type "load">
+ DataSource "midterm"
+ FailureMax 4
+ Hits 3
+ Hysteresis 3
+ </Type>
</Host>
</Threshold>
example for the "df" type, where you may want to issue a warning when less than
5E<nbsp>% of the total space is available. Defaults to B<false>.
+=item B<Hits> I<Value>
+
+Sets the number of occurrences which the threshold must be arised before to
+dispatch any notification or, in other words, the number of B<Interval>s
+than the threshold must be match before dispatch any notification.
+
+=item B<Hysteresis> I<Value>
+
+Sets the hysteresis value for threshold. The hysteresis is a method to
+prevent flapping between states, until a new received value for
+a previously matched threshold down below the threshold condition
+(B<WarningMax>, B<FailureMin> or everthing else) minus the hysteresis value,
+the failure (respectively warning) state will be keep.
+
+=item B<Interesting> B<true>|B<false>
+
+If set to B<true> (the default), the threshold must be treated as
+interesting and, when a number of B<Timeout> values will lost, then
+a missing notification will be dispatched. On the other hand, if set to
+B<false>, the missing notification will never dispatched for this threshold.
+
=back
=head1 FILTER CONFIGURATION
the identifier of a value. If multiple regular expressions are given, B<all>
regexen must match for a value to match.
+=item B<Invert> B<false>|B<true>
+
+When set to B<true>, the result of the match is inverted, i.e. all value lists
+where all regular expressions apply are not matched, all other value lists are
+matched. Defaults to B<false>.
+
=back
Example:
projects / collectd.git / blobdiff