behavior.
The syntax of this config file is similar to the config file of the famous
-B<Apache Webserver>. Each line contains either a key-value-pair or a
-section-start or -end. Empty lines and everything after the hash-symbol `#' is
-ignored. Values are either string, enclosed in double-quotes,
-(floating-point-)numbers or a boolean expression, i.E<nbsp>e. either B<true> or
-B<false>. String containing of only alphanumeric characters and underscores do
-not need to be quoted. Lines may be wrapped by using `\' as the last character
-before the newline. This allows long lines to be split into multiple lines.
-Quoted strings may be wrapped as well. However, those are treated special in
-that whitespace at the beginning of the following lines will be ignored, which
-allows for nicely indenting the wrapped lines.
-
-The configuration is read and processed in order, i.E<nbsp>e. from top to
-bottom. So the plugins are loaded in the order listed in this config file. It
-is a good idea to load any logging plugins first in order to catch messages
-from plugins during configuration. Also, the C<LoadPlugin> option B<must> occur
-B<before> the C<E<lt>Plugin ...E<gt>> block.
+I<Apache> webserver. Each line contains either an option (a key and a list of
+one or more values) or a section-start or -end. Empty lines and everything
+after a non-quoted hash-symbol (C<#>) is ignored. I<Keys> are unquoted
+strings, consisting only of alphanumeric characters and the underscore (C<_>)
+character. Keys are handled case insensitive by I<collectd> itself and all
+plugins included with it. I<Values> can either be an I<unquoted string>, a
+I<quoted string> (enclosed in double-quotes) a I<number> or a I<boolean>
+expression. I<Unquoted strings> consist of only alphanumeric characters and
+underscores (C<_>) and do not need to be quoted. I<Quoted strings> are
+enclosed in double quotes (C<">). You can use the backslash character (C<\>)
+to include double quotes as part of the string. I<Numbers> can be specified in
+decimal and floating point format (using a dot C<.> as decimal separator),
+hexadecimal when using the C<0x> prefix and octal with a leading zero (C<0>).
+I<Boolean> values are either B<true> or B<false>.
+
+Lines may be wrapped by using C<\> as the last character before the newline.
+This allows long lines to be split into multiple lines. Quoted strings may be
+wrapped as well. However, those are treated special in that whitespace at the
+beginning of the following lines will be ignored, which allows for nicely
+indenting the wrapped lines.
+
+The configuration is read and processed in order, i.e. from top to bottom. So
+the plugins are loaded in the order listed in this config file. It is a good
+idea to load any logging plugins first in order to catch messages from plugins
+during configuration. Also, the C<LoadPlugin> option B<must> occur B<before>
+the appropriate C<E<lt>Plugin ...E<gt>> block.
=head1 GLOBAL OPTIONS
# Persistent false
# Format "command"
# StoreRates false
+ # GraphitePrefix "collectd."
+ # GraphiteEscapeChar "_"
</Publish>
# Receive values from an AMQP broker
an easy and straight forward exchange format. The C<Content-Type> header field
will be set to C<application/json>.
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+"<metric> <value> <timestamp>\n". The C<Content-Type> header field will be set to
+C<text/graphite>.
+
A subscribing client I<should> use the C<Content-Type> header field to
determine how to decode the values. Currently, the I<AMQP plugin> itself can
only decode the B<Command> format.
Please note that currently this option is only used if the B<Format> option has
been set to B<JSON>.
+=item B<GraphitePrefix> (Publish and B<Format>=I<Graphite> only)
+
+A prefix can be added in the metric name when outputting in the I<Graphite> format.
+It's added before the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphitePostfix> (Publish and B<Format>=I<Graphite> only)
+
+A postfix can be added in the metric name when outputting in the I<Graphite> format.
+It's added after the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphiteEscapeChar> (Publish and B<Format>=I<Graphite> only)
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is "_" (I<Underscore>).
+
=back
=head2 Plugin C<apache>
about cache utilization, memory and bandwidth used.
L<http://www.danga.com/memcached/>
+ <Plugin "memcached">
+ <Instance "name">
+ Host "memcache.example.com"
+ Port 11211
+ </Instance>
+ </Plugin>
+
+The plugin configuration consists of one or more B<Instance> blocks which
+specify one I<memcached> connection each. Within the B<Instance> blocks, the
+following options are allowed:
+
=over 4
=item B<Host> I<Hostname>
TCP-Port to connect to. Defaults to B<11211>.
+=item B<Socket> I<Path>
+
+Connect to I<memcached> using the UNIX domain socket at I<Path>. If this
+setting is given, the B<Host> and B<Port> settings are ignored.
+
=back
=head2 Plugin C<modbus>
multicast group is C<239.192.74.66>. The default I<UDP> port is B<25826>.
Both, B<Server> and B<Listen> can be used as single option or as block. When
-used as block, given options are valid for this socket only. For example:
+used as block, given options are valid for this socket only. The following
+example will export the metrics twice: Once to an "internal" server (without
+encryption and signing) and one to an external server (with cryptographic
+signature):
<Plugin "network">
+ # Export to an internal server
+ # (demonstrates usage without additional options)
Server "collectd.internal.tld"
+
+ # Export to an external server
+ # (demonstrates usage with signature options)
<Server "collectd.external.tld">
SecurityLevel "sign"
Username "myhostname"
Defines the "database alias" or "service name" to connect to. Usually, these
names are defined in the file named C<$ORACLE_HOME/network/admin/tnsnames.ora>.
+=item B<Host> I<Host>
+
+Hostname to use when dispatching values for this database. Defaults to using
+the global hostname of the I<collectd> instance.
+
=item B<Username> I<Username>
Username used for authentication.
connections. Either a service name of a port number may be given. Please note
that numerical port numbers must be given as a string, too.
+=item B<Password> I<Password>
+
+Use I<Password> to authenticate when connecting to I<Redis>.
+
=item B<Timeout> I<Timeout in miliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
If set to B<true>, the plugin instance and type instance will be in their own
path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
default), the plugin and plugin instance (and likewise the type and type
-instance) are put into once component, for example C<host.cpu-0.cpu-idle>.
+instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
=item B<AlwaysAppendDS> B<false>|B<true>
=back
+=head1 THRESHOLD CONFIGURATION
+
+Starting with version C<4.3.0> collectd has support for B<monitoring>. By that
+we mean that the values are not only stored or sent somewhere, but that they
+are judged and, if a problem is recognized, acted upon. The only action
+collectd takes itself is to generate and dispatch a "notification". Plugins can
+register to receive notifications and perform appropriate further actions.
+
+Since systems and what you expect them to do differ a lot, you can configure
+B<thresholds> for your values freely. This gives you a lot of flexibility but
+also a lot of responsibility.
+
+Every time a value is out of range a notification is dispatched. This means
+that the idle percentage of your CPU needs to be less then the configured
+threshold only once for a notification to be generated. There's no such thing
+as a moving average or similar - at least not now.
+
+Also, all values that match a threshold are considered to be relevant or
+"interesting". As a consequence collectd will issue a notification if they are
+not received for B<Timeout> iterations. The B<Timeout> configuration option is
+explained in section L<"GLOBAL OPTIONS">. If, for example, B<Timeout> is set to
+"2" (the default) and some hosts sends it's CPU statistics to the server every
+60 seconds, a notification will be dispatched after about 120 seconds. It may
+take a little longer because the timeout is checked only once each B<Interval>
+on the server.
+
+When a value comes within range again or is received after it was missing, an
+"OKAY-notification" is dispatched.
+
+Here is a configuration example to get you started. Read below for more
+information.
+
+ <Threshold>
+ <Type "foo">
+ WarningMin 0.00
+ WarningMax 1000.00
+ FailureMin 0.00
+ FailureMax 1200.00
+ Invert false
+ Instance "bar"
+ </Type>
+
+ <Plugin "interface">
+ Instance "eth0"
+ <Type "if_octets">
+ FailureMax 10000000
+ DataSource "rx"
+ </Type>
+ </Plugin>
+
+ <Host "hostname">
+ <Type "cpu">
+ Instance "idle"
+ FailureMin 10
+ </Type>
+
+ <Plugin "memory">
+ <Type "memory">
+ Instance "cached"
+ WarningMin 100000000
+ </Type>
+ </Plugin>
+ </Host>
+ </Threshold>
+
+There are basically two types of configuration statements: The C<Host>,
+C<Plugin>, and C<Type> blocks select the value for which a threshold should be
+configured. The C<Plugin> and C<Type> blocks may be specified further using the
+C<Instance> option. You can combine the block by nesting the blocks, though
+they must be nested in the above order, i.E<nbsp>e. C<Host> may contain either
+C<Plugin> and C<Type> blocks, C<Plugin> may only contain C<Type> blocks and
+C<Type> may not contain other blocks. If multiple blocks apply to the same
+value the most specific block is used.
+
+The other statements specify the threshold to configure. They B<must> be
+included in a C<Type> block. Currently the following statements are recognized:
+
+=over 4
+
+=item B<FailureMax> I<Value>
+
+=item B<WarningMax> I<Value>
+
+Sets the upper bound of acceptable values. If unset defaults to positive
+infinity. If a value is greater than B<FailureMax> a B<FAILURE> notification
+will be created. If the value is greater than B<WarningMax> but less than (or
+equal to) B<FailureMax> a B<WARNING> notification will be created.
+
+=item B<FailureMin> I<Value>
+
+=item B<WarningMin> I<Value>
+
+Sets the lower bound of acceptable values. If unset defaults to negative
+infinity. If a value is less than B<FailureMin> a B<FAILURE> notification will
+be created. If the value is less than B<WarningMin> but greater than (or equal
+to) B<FailureMin> a B<WARNING> notification will be created.
+
+=item B<DataSource> I<DSName>
+
+Some data sets have more than one "data source". Interesting examples are the
+C<if_octets> data set, which has received (C<rx>) and sent (C<tx>) bytes and
+the C<disk_ops> data set, which holds C<read> and C<write> operations. The
+system load data set, C<load>, even has three data sources: C<shortterm>,
+C<midterm>, and C<longterm>.
+
+Normally, all data sources are checked against a configured threshold. If this
+is undesirable, or if you want to specify different limits for each data
+source, you can use the B<DataSource> option to have a threshold apply only to
+one data source.
+
+=item B<Invert> B<true>|B<false>
+
+If set to B<true> the range of acceptable values is inverted, i.E<nbsp>e.
+values between B<FailureMin> and B<FailureMax> (B<WarningMin> and
+B<WarningMax>) are not okay. Defaults to B<false>.
+
+=item B<Persist> B<true>|B<false>
+
+Sets how often notifications are generated. If set to B<true> one notification
+will be generated for each value that is out of the acceptable range. If set to
+B<false> (the default) then a notification is only generated if a value is out
+of range but the previous value was okay.
+
+This applies to missing values, too: If set to B<true> a notification about a
+missing value is generated once every B<Interval> seconds. If set to B<false>
+only one such notification is generated until the value appears again.
+
+=item B<Percentage> B<true>|B<false>
+
+If set to B<true>, the minimum and maximum values given are interpreted as
+percentage value, relative to the other data sources. This is helpful for
+example for the "df" type, where you may want to issue a warning when less than
+5E<nbsp>% of the total space is available. Defaults to B<false>.
+
+=item B<Hits> I<Number>
+
+Delay creating the notification until the threshold has been passed I<Number>
+times. When a notification has been generated, or when a subsequent value is
+inside the threshold, the counter is reset. If, for example, a value is
+collected once every 10E<nbsp>seconds and B<Hits> is set to 3, a notification
+will be dispatched at most once every 30E<nbsp>seconds.
+
+This is useful when short bursts are not a problem. If, for example, 100% CPU
+usage for up to a minute is normal (and data is collected every
+10E<nbsp>seconds), you could set B<Hits> to B<6> to account for this.
+
+=item B<Hysteresis> I<Number>
+
+When set to non-zero, a hysteresis value is applied when checking minimum and
+maximum bounds. This is useful for values that increase slowly and fluctuate a
+bit while doing so. When these values come close to the threshold, they may
+"flap", i.e. switch between failure / warning case and okay case repeatedly.
+
+If, for example, the threshold is configures as
+
+ WarningMax 100.0
+ Hysteresis 1.0
+
+then a I<Warning> notification is created when the value exceeds I<101> and the
+corresponding I<Okay> notification is only created once the value falls below
+I<99>, thus avoiding the "flapping".
+
+=back
+
=head1 FILTER CONFIGURATION
Starting with collectd 4.6 there is a powerful filtering infrastructure