values lead to a higher system load produced by collectd, while higher values
lead to more coarse statistics.
+=item B<Timeout> I<Iterations>
+
+Consider a value list "missing" when no update has been read or received for
+I<Iterations> iterations. By default, I<collectd> considers a value list
+missing when no update has been received for twice the update interval. Since
+this setting uses iterations, the maximum allowed time without update depends
+on the I<Interval> information contained in each value list. This is used in
+the I<Threshold> configuration to dispatch notifications about missing values,
+see L<"THRESHOLD CONFIGURATION"> below.
+
=item B<ReadThreads> I<Num>
Number of threads to start for reading plugins. The default value is B<5>, but
If B<Hostname> is determined automatically this setting controls whether or not
the daemon should try to figure out the "fully qualified domain name", FQDN.
-This is done using a lookup of the name returned by C<gethostname>.
-
-Using this feature (i.E<nbsp>e. setting this option to B<true>) is recommended.
-However, to preserve backwards compatibility the default is set to B<false>.
-The sample config file that is installed with C<makeE<nbsp>install> includes a
-line which sets this option, though, so that default installations will have
-this setting enabled.
+This is done using a lookup of the name returned by C<gethostname>. This option
+is enabled by default.
=item B<PreCacheChain> I<ChainName>
F<README> file shipped with the sourcecode and hopefully binary packets as
well.
+=head2 Plugin C<amqp>
+
+The I<AMQMP plugin> can be used to communicate with other instances of
+I<collectd> or third party applications using an AMQP message broker. Values
+are sent to or received from the broker, which handles routing, queueing and
+possibly filtering or messages.
+
+ <Plugin "amqp">
+ # Send values to an AMQP broker
+ <Publish "some_name">
+ Host "localhost"
+ Port "5672"
+ VHost "/"
+ User "guest"
+ Password "guest"
+ Exchange "amq.fanout"
+ # ExchangeType "fanout"
+ # RoutingKey "collectd"
+ # Persistent false
+ # Format "command"
+ # StoreRates false
+ </Publish>
+
+ # Receive values from an AMQP broker
+ <Subscribe "some_name">
+ Host "localhost"
+ Port "5672"
+ VHost "/"
+ User "guest"
+ Password "guest"
+ Exchange "amq.fanout"
+ # ExchangeType "fanout"
+ # Queue "queue_name"
+ # RoutingKey "collectd.#"
+ </Subscribe>
+ </Plugin>
+
+The plugin's configuration consists of a number of I<Publish> and I<Subscribe>
+blocks, which configure sending and receiving of values respectively. The two
+blocks are very similar, so unless otherwise noted, an option can be used in
+either block. The name given in the blocks starting tag is only used for
+reporting messages, but may be used to support I<flushing> of certain
+I<Publish> blocks in the future.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the AMQP broker. Defaults to the default behavior of
+the underlying communications library, I<rabbitmq-c>, which is "localhost".
+
+=item B<Port> I<Port>
+
+Service name or port number on which the AMQP broker accepts connections. This
+argument must be a string, even if the numeric form is used. Defaults to
+"5672".
+
+=item B<VHost> I<VHost>
+
+Name of the I<virtual host> on the AMQP broker to use. Defaults to "/".
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+Credentials used to authenticate to the AMQP broker. By default "guest"/"guest"
+is used.
+
+=item B<Exchange> I<Exchange>
+
+In I<Publish> blocks, this option specifies the I<exchange> to send values to.
+By default, "amq.fanout" will be used.
+
+In I<Subscribe> blocks this option is optional. If given, a I<binding> between
+the given exchange and the I<queue> is created, using the I<routing key> if
+configured. See the B<Queue> and B<RoutingKey> options below.
+
+=item B<ExchangeType> I<Type>
+
+If given, the plugin will try to create the configured I<exchange> with this
+I<type> after connecting. When in a I<Subscribe> block, the I<queue> will then
+be bound to this exchange.
+
+=item B<Queue> I<Queue> (Subscribe only)
+
+Configures the I<queue> name to subscribe to. If no queue name was configures
+explicitly, a unique queue name will be created by the broker.
+
+=item B<RoutingKey> I<Key>
+
+In I<Publish> blocks, this configures the routing key to set on all outgoing
+messages. If not given, the routing key will be computed from the I<identifier>
+of the value. The host, plugin, type and the two instances are concatenated
+together using dots as the separator and all containing dots replaced with
+slashes. For example "collectd.host/example/com.cpu.0.cpu.user". This makes it
+possible to receive only specific values using a "topic" exchange.
+
+In I<Subscribe> blocks, configures the I<routing key> used when creating a
+I<binding> between an I<exchange> and the I<queue>. The usual wildcards can be
+used to filter messages when using a "topic" exchange. If you're only
+interested in CPU statistics, you could use the routing key "collectd.*.cpu.#"
+for example.
+
+=item B<Persistent> B<true>|B<false> (Publish only)
+
+Selects the I<delivery method> to use. If set to B<true>, the I<persistent>
+mode will be used, i.e. delivery is guaranteed. If set to B<false> (the
+default), the I<transient> delivery mode will be used, i.e. messages may be
+lost due to high load, overflowing queues or similar issues.
+
+=item B<Format> B<Command>|B<JSON> (Publish only)
+
+Selects the format in which messages are sent to the broker. If set to
+B<Command> (the default), values are sent as C<PUTVAL> commands which are
+identical to the syntax used by the I<Exec> and I<UnixSock plugins>. In this
+case, the C<Content-Type> header field will be set to C<text/collectd>.
+
+If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
+an easy and straight forward exchange format. The C<Content-Type> header field
+will be set to C<application/json>.
+
+A subscribing client I<should> use the C<Content-Type> header field to
+determine how to decode the values. Currently, the I<AMQP plugin> itself can
+only decode the B<Command> format.
+
+=item B<StoreRates> B<true>|B<false> (Publish only)
+
+Determines whether or not C<COUNTER>, C<DERIVE> and C<ABSOLUTE> data sources
+are converted to a I<rate> (i.e. a C<GAUGE> value). If set to B<false> (the
+default), no conversion is performed. Otherwise the conversion is performed
+using the internal value cache.
+
+Please note that currently this option is only used if the B<Format> option has
+been set to B<JSON>.
+
+=back
+
=head2 Plugin C<apache>
To configure the C<apache>-plugin you first need to configure the Apache
also supported. It introduces a new field, called C<BusyServers>, to count the
number of currently connected clients. This field is also supported.
-The following options are accepted by the C<apache>-plugin:
+The configuration of the I<Apache> plugin consists of one or more
+C<E<lt>InstanceE<nbsp>/E<gt>> blocks. Each block requires one string argument
+as the instance name. For example:
+
+ <Plugin "apache">
+ <Instance "www1">
+ URL "http://www1.example.com/mod_status?auto"
+ </Instance>
+ <Instance "www2">
+ URL "http://www2.example.com/mod_status?auto"
+ </Instance>
+ </Plugin>
+
+The instance name will be used as the I<plugin instance>. To emulate the old
+(versionE<nbsp>4) behavior, you can use an empty string (""). In order for the
+plugin to work correctly, each instance name must be unique. This is not
+enforced by the plugin and it is your responsibility to ensure it.
+
+The following options are accepted within each I<Instance> block:
=over 4
Sets the URL of the C<mod_status> output. This needs to be the output generated
by C<ExtendedStatus on> and it needs to be the machine readable output
-generated by appending the C<?auto> argument.
+generated by appending the C<?auto> argument. This option is I<mandatory>.
=item B<User> I<Username>
=back
+=head2 Plugin C<curl_xml>
+
+The B<curl_xml plugin> uses B<libcurl> (L<http://curl.haxx.se/>) and B<libxml2>
+(L<http://xmlsoft.org/>) to retrieve XML data via cURL.
+
+ <Plugin "curl_xml">
+ <URL "http://localhost/stats.xml">
+ Host "my_host"
+ Instance "some_instance"
+ User "collectd"
+ Password "thaiNg0I"
+ VerifyPeer true
+ VerifyHost true
+ CACert "/path/to/ca.crt"
+
+ <XPath "table[@id=\"magic_level\"]/tr">
+ Type "magic_level"
+ #InstancePrefix "prefix-"
+ InstanceFrom "td[1]"
+ ValuesFrom "td[2]/span[@class=\"level\"]"
+ </XPath>
+ </URL>
+ </Plugin>
+
+In the B<Plugin> block, there may be one or more B<URL> blocks, each defining a
+URL to be fetched via HTTP (using libcurl). Within each B<URL> block there are
+options which specify the connection parameters, for example authentication
+information, and one or more B<XPath> blocks.
+
+Each B<XPath> block specifies how to get one type of information. The
+string argument must be a valid XPath expression which returns a list
+of "base elements". One value is dispatched for each "base element". The
+I<type instance> and values are looked up using further I<XPath> expressions
+that should be relative to the base element.
+
+Within the B<URL> block the following options are accepted:
+
+=over 4
+
+=item B<Host> I<Name>
+
+Use I<Name> as the host name when submitting values. Defaults to the global
+host name setting.
+
+=item B<Instance> I<Instance>
+
+Use I<Instance> as the plugin instance when submitting values. Defaults to an
+empty string (no plugin instance).
+
+=item B<User> I<User>
+=item B<Password> I<Password>
+=item B<VerifyPeer> B<true>|B<false>
+=item B<VerifyHost> B<true>|B<false>
+=item B<CACert> I<CA Cert File>
+
+These options behave exactly equivalent to the appropriate options of the
+I<cURL> and I<cURL-JSON> plugins. Please see there for a detailed description.
+
+=item E<lt>B<XPath> I<XPath-expression>E<gt>
+
+Within each B<URL> block, there must be one or more B<XPath> blocks. Each
+B<XPath> block specifies how to get one type of information. The string
+argument must be a valid XPath expression which returns a list of "base
+elements". One value is dispatched for each "base element".
+
+Within the B<XPath> block the following options are accepted:
+
+=over 4
+
+=item B<Type> I<Type>
+
+Specifies the I<Type> used for submitting patches. This determines the number
+of values that are required / expected and whether the strings are parsed as
+signed or unsigned integer or as double values. See L<types.db(5)> for details.
+This option is required.
+
+=item B<InstancePrefix> I<InstancePrefix>
+
+Prefix the I<type instance> with I<InstancePrefix>. The values are simply
+concatenated together without any separator.
+This option is optional.
+
+=item B<InstanceFrom> I<InstanceFrom>
+
+Specifies a XPath expression to use for determining the I<type instance>. The
+XPath expression must return exactly one element. The element's value is then
+used as I<type instance>, possibly prefixed with I<InstancePrefix> (see above).
+
+This value is required. As a special exception, if the "base XPath expression"
+(the argument to the B<XPath> block) returns exactly one argument, then this
+option may be omitted.
+
+=item B<ValuesFrom> I<ValuesFrom> [I<ValuesFrom> ...]
+
+Specifies one or more XPath expression to use for reading the values. The
+number of XPath expressions must match the number of data sources in the
+I<type> specified with B<Type> (see above). Each XPath expression must return
+exactly one element. The element's value is then parsed as a number and used as
+value for the appropriate value in the value list dispatched to the daemon.
+
+=back
+
+=back
+
=head2 Plugin C<dbi>
This plugin uses the B<dbi> library (L<http://libdbi.sourceforge.net/>) to
(the default), it will report a disk as "root", but with it I<true>, it will be
"sda1" (or whichever).
-=item B<ReportReserved> B<true>|B<false>
-
-When enabled, the blocks reserved for root are reported separately. When
-disabled (the default for backwards compatibility reasons) the reserved space
-will be included in the "free" space.
-
-When disabled, the "df" type will be used to store "free" and "used" space. The
-mount point or disk name (see option B<ReportByDevice>) is used as type
-instance in this case (again: backwards compatibility).
-
-When enabled, the type "df_complex" is used and three files are created. The
-mount point or disk name is used as plugin instance and the type instance is
-set to "free", "reserved" and "used" as appropriate.
-
-Enabling this option is recommended.
-
=item B<ReportInodes> B<true>|B<false>
Enables or disables reporting of free, reserved and used inodes. Defaults to
Controls whether or not to recurse into subdirectories. Enabled by default.
+=item B<IncludeHidden> I<true>|I<false>
+
+Controls whether or not to include "hidden" files and directories in the count.
+"Hidden" files and directories are those, whose name begins with a dot.
+Defaults to I<false>, i.e. by default hidden files and directories are ignored.
+
=back
=head2 Plugin C<GenericJMX>
TCP-Port to connect to. Defaults to B<7634>.
-=item B<TranslateDevicename> I<true>|I<false>
-
-If enabled, translate the disk names to major/minor device numbers
-(e.E<nbsp>g. "8-0" for /dev/sda). For backwards compatibility this defaults to
-I<true> but it's recommended to disable it as it will probably be removed in
-the next major version.
-
=back
=head2 Plugin C<interface>
means to concatenate the guest name and UUID (with a literal colon character
between, thus I<"foo:1234-1234-1234-1234">).
+=item B<InterfaceFormat> B<name>|B<address>
+
+When the libvirt plugin logs interface data, it sets the name of the collected
+data according to this setting. The default is to use the path as provided by
+the hypervisor (the "dev" property of the target node), which is equal to
+setting B<name>.
+
+B<address> means use the interface's mac address. This is useful since the
+interface path might change between reboots of a guest or across migrations.
+
=back
=head2 Plugin C<logfile>
Prefix all lines printed by the current time. Defaults to B<true>.
+=item B<PrintSeverity> B<true>|B<false>
+
+When enabled, all lines are prefixed by the severity of the log message, for
+example "warning". Defaults to B<false>.
+
=back
B<Note>: There is no need to notify the daemon after moving or removing the
=back
+=head2 Plugin C<modbus>
+
+The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
+register values. It supports reading single registers (unsigned 16E<nbsp>bit
+values), large integer values (unsigned 32E<nbsp>bit values) and floating point
+values (two registers interpreted as IEEE floats in big endian notation).
+
+Synopsis:
+
+ <Data "voltage-input-1">
+ RegisterBase 0
+ RegisterType float
+ Type voltage
+ Instance "input-1"
+ </Data>
+
+ <Data "voltage-input-2">
+ RegisterBase 2
+ RegisterType float
+ Type voltage
+ Instance "input-2"
+ </Data>
+
+ <Host "modbus.example.com">
+ Address "192.168.0.42"
+ Port "502"
+ Interval 60
+
+ <Slave 1>
+ Instance "power-supply"
+ Collect "voltage-input-1"
+ Collect "voltage-input-2"
+ </Slave>
+ </Host>
+
+=over 4
+
+=item E<lt>B<Data> I<Name>E<gt> blocks
+
+Data blocks define a mapping between register numbers and the "types" used by
+I<collectd>.
+
+Within E<lt>DataE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<RegisterBase> I<Number>
+
+Configures the base register to read from the device. If the option
+B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
+register will be read (the register number is increased by one).
+
+=item B<RegisterType> B<Uint16>|B<Uint32>|B<Float>
+
+Specifies what kind of data is returned by the device. If the type is B<Uint32>
+or B<Float>, two 16E<nbsp>bit registers will be read and the data is combined
+into one value. Defaults to B<Uint16>.
+
+=item B<Type> I<Type>
+
+Specifies the "type" (data set) to use when dispatching the value to
+I<collectd>. Currently, only data sets with exactly one data source are
+supported.
+
+=item B<Instance> I<Instance>
+
+Sets the type instance to use when dispatching the value to I<collectd>. If
+unset, an empty string (no type instance) is used.
+
+=back
+
+=item E<lt>B<Host> I<Name>E<gt> blocks
+
+Host blocks are used to specify to which hosts to connect and what data to read
+from their "slaves". The string argument I<Name> is used as hostname when
+dispatching the values to I<collectd>.
+
+Within E<lt>HostE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Address> I<Hostname>
+
+Specifies the node name (the actual network address) used to connect to the
+host. This may be an IP address or a hostname. Please note that the used
+I<libmodbus> library only supports IPv4 at the moment.
+
+=item B<Port> I<Service>
+
+Specifies the port used to connect to the host. The port can either be given as
+a number or as a service name. Please note that the I<Service> argument must be
+a string, even if ports are given in their numerical form. Defaults to "502".
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+host. By default the global B<Interval> setting will be used.
+
+=item E<lt>B<Slave> I<ID>E<gt>
+
+Over each TCP connection, multiple Modbus devices may be reached. The slave ID
+is used to specify which device should be addressed. For each device you want
+to query, one B<Slave> block must be given.
+
+Within E<lt>SlaveE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Instance> I<Instance>
+
+Specify the plugin instance to use when dispatching the values to I<collectd>.
+By default "slave_I<ID>" is used.
+
+=item B<Collect> I<DataName>
+
+Specifies which data to retrieve from the device. I<DataName> must be the same
+string as the I<Name> argument passed to a B<Data> block. You can specify this
+option multiple times to collect more than one value from a slave. At least one
+B<Collect> option is mandatory.
+
+=back
+
+=back
+
+=back
+
=head2 Plugin C<mysql>
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
one or more databases when started and keeps the connection up as long as
possible. When the connection is interrupted for whatever reason it will try
-to re-connect. The plugin will complaint loudly in case anything goes wrong.
+to re-connect. The plugin will complain loudly in case anything goes wrong.
This plugin issues the MySQL C<SHOW STATUS> / C<SHOW GLOBAL STATUS> command
and collects information about MySQL network traffic, executed statements,
This feature is only available if the I<network> plugin was linked with
I<libgcrypt>.
+=item B<Interface> I<Interface name>
+
+Set the outgoing interface for IP packets. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is to let the kernel choose the appropriate interface. Be warned
+that the manual selection of an interface for unicast traffic is only
+necessary in rare cases.
+
=back
=item B<E<lt>Listen> I<Host> [I<Port>]B<E<gt>>
using L<stat(2)>. If the file has been changed, the contents is re-read. While
the file is being read, it is locked using L<fcntl(2)>.
+=item B<Interface> I<Interface name>
+
+Set the incoming interface for IP packets explicitly. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is, to let the kernel choose the appropriate interface. Thus incoming
+traffic gets only accepted, if it arrives on the given interface.
+
=back
=item B<TimeToLive> I<1-255>
=item B<MaxPacketSize> I<1024-65535>
Set the maximum size for datagrams received over the network. Packets larger
-than this will be truncated.
+than this will be truncated. Defaults to 1452E<nbsp>bytes.
=item B<Forward> I<true|false>
necessary it's not a huge problem since the plugin has a duplicate detection,
so the values will not loop.
-=item B<CacheFlush> I<Seconds>
-
-For each host/plugin/type combination the C<network plugin> caches the time of
-the last value being sent or received. Every I<Seconds> seconds the plugin
-searches and removes all entries that are older than I<Seconds> seconds, thus
-freeing the unused memory again. Since this process is somewhat expensive and
-normally doesn't do much, this value should not be too small. The default is
-1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
-either.
-
=item B<ReportStats> B<true>|B<false>
The network plugin cannot only receive and send statistics, it can also create
when reading multiple status files. Enabling this option is recommended, but to
maintain backwards compatibility this option is disabled by default.
-=item B<Compression> B<true>|B<false>
+=item B<CollectCompression> B<true>|B<false>
Sets whether or not statistics about the compression used by OpenVPN should be
collected. This information is only available in I<single> mode. Enabled by
default.
+=item B<CollectIndividualUsers> B<true>|B<false>
+
+Sets whether or not traffic information is collected for each connected client
+individually. If set to false, currently no traffic data is collected at all
+because aggregating this data in a save manner is tricky. Defaults to B<true>.
+
+=item B<CollectUserCount> B<true>|B<false>
+
+When enabled, the number of currently connected clients or users is collected.
+This is especially interesting when B<CollectIndividualUsers> is disabled, but
+can be configured independently from that option. Defaults to B<false>.
+
=back
=head2 Plugin C<oracle>
This plugin embeds a Perl-interpreter into collectd and provides an interface
to collectd's plugin system. See L<collectd-perl(5)> for its documentation.
+=head2 Plugin C<pinba>
+
+The I<Pinba plugin> receives profiling information from I<Pinba>, an extension
+for the I<PHP> interpreter. At the end of executing a script, i.e. after a
+PHP-based webpage has been delivered, the extension will send a UDP packet
+containing timing information, peak memory usage and so on. The plugin will
+wait for such packets, parse them and account the provided information, which
+is then dispatched to the daemon once per interval.
+
+Synopsis:
+
+ <Plugin pinba>
+ Address "::0"
+ Port "30002"
+ # Overall statistics for the website.
+ <View "www-total">
+ Server "www.example.com"
+ </View>
+ # Statistics for www-a only
+ <View "www-a">
+ Host "www-a.example.com"
+ Server "www.example.com"
+ </View>
+ # Statistics for www-b only
+ <View "www-b">
+ Host "www-b.example.com"
+ Server "www.example.com"
+ </View>
+ </Plugin>
+
+The plugin provides the following configuration options:
+
+=over 4
+
+=item B<Address> I<Node>
+
+Configures the address used to open a listening socket. By default, plugin will
+bind to the I<any> address C<::0>.
+
+=item B<Port> I<Service>
+
+Configures the port (service) to bind to. By default the default Pinba port
+"30002" will be used. The option accepts service names in addition to port
+numbers and thus requires a I<string> argument.
+
+=item E<lt>B<View> I<Name>E<gt> block
+
+The packets sent by the Pinba extension include the hostname of the server, the
+server name (the name of the virtual host) and the script that was executed.
+Using B<View> blocks it is possible to separate the data into multiple groups
+to get more meaningful statistics. Each packet is added to all matching groups,
+so that a packet may be accounted for more than once.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Matches the hostname of the system the webserver / script is running on. This
+will contain the result of the L<gethostname(2)> system call. If not
+configured, all hostnames will be accepted.
+
+=item B<Server> I<Server>
+
+Matches the name of the I<virtual host>, i.e. the contents of the
+C<$_SERVER["SERVER_NAME"]> variable when within PHP. If not configured, all
+server names will be accepted.
+
+=item B<Script> I<Script>
+
+Matches the name of the I<script name>, i.e. the contents of the
+C<$_SERVER["SCRIPT_NAME"]> variable when within PHP. If not configured, all
+script names will be accepted.
+
+=back
+
+=back
+
=head2 Plugin C<ping>
The I<Ping> plugin starts a new thread which sends ICMP "ping" packets to the
=item B<MaxMissed> I<Packets>
-Trigger a DNS resolv after the host has not replied to I<Packets> packets. This
+Trigger a DNS resolv
e after the host has not replied to I<Packets> packets. This
enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
Default: B<-1> (disabled)
</Database>
<Database bar>
+ Interval 300
Service "service_name"
Query backend # predefined
Query rt36_tickets
The returned lines will be handled separately one after another.
-=item B<Query> I<sql query statement>
-
-This is a deprecated synonym for B<Statement>. It will be removed in version 5
-of collectd.
-
=item B<Param> I<hostname>|I<database>|I<username>|I<interval>
Specify the parameters which should be passed to the SQL query. The parameters
=item I<interval>
-The interval collectd is using (as specified by the B<Interval> option).
+The interval with which this database is queried (as specified by the database
+specific or global B<Interval> options).
=back
times. If multiple B<ValuesFrom> options are specified, the columns are read
in the given order.
-=item B<Column> I<type> [I<type instance>]
-
-This is a deprecated alternative to a B<Result> block. It will be removed in
-version 5 of collectd. It is equivalent to the following B<Result> block:
-
- <Result>
- Type I<type>
- InstancePrefix I<type instance>
- ValuesFrom I<name of the x. column>
- </Result>
-
-The order of the B<Column> options defines which columns of the query result
-should be used. The first option specifies the data found in the first column,
-the second option that of the second column, and so on.
-
=item B<MinVersion> I<version>
=item B<MaxVersion> I<version>
and patch-level versions, each represented as two-decimal-digit numbers. For
example, version 8.2.3 will become 80203.
-=item B<MinPGVersion> I<version>
-
-=item B<MaxPGVersion> I<version>
-
-These are deprecated synonyms for B<MinVersion> and B<MaxVersion>
-respectively. They will be removed in version 5 of collectd.
-
=back
The following predefined queries are available (the definitions can be found
=over 4
+=item B<Interval> I<seconds>
+
+Specify the interval with which the database should be queried. The default is
+to use the global B<Interval> setting.
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
User "collectd"
Password "secr3t"
CollectInterface true
+ CollectCPULoad true
+ CollectMemory true
</Router>
<Router>
Host "router1.example.com"
Password "5ecret"
CollectInterface true
CollectRegistrationTable true
+ CollectDF true
+ CollectDisk true
</Router>
</Plugin>
When set to B<true>, information about wireless LAN connections will be
collected. Defaults to B<false>.
+=item B<CollectCPULoad> B<true>|B<false>
+
+When set to B<true>, information about the CPU usage will be collected. The
+number is a dimensionless value where zero indicates no CPU usage at all.
+Defaults to B<false>.
+
+=item B<CollectMemory> B<true>|B<false>
+
+When enabled, the amount of used and free memory will be collected. How used
+memory is calculated is unknown, for example whether or not caches are counted
+as used space.
+Defaults to B<false>.
+
+=item B<CollectDF> B<true>|B<false>
+
+When enabled, the amount of used and free disk space will be collected.
+Defaults to B<false>.
+
+=item B<CollectDisk> B<true>|B<false>
+
+When enabled, the number of sectors written and bad blocks will be collected.
+Defaults to B<false>.
+
+=back
+
+=head2 Plugin C<redis>
+
+The I<Redis plugin> connects to one or more Redis servers and gathers
+information about each server's state. For each server there is a I<Node> block
+which configures the connection parameters for this node.
+
+ <Plugin redis>
+ <Node "example">
+ Host "localhost"
+ Port "6379"
+ Timeout 2000
+ </Node>
+ </Plugin>
+
+The information shown in the synopsis above is the I<default configuration>
+which is used by the plugin if no configuration is present.
+
+=over 4
+
+=item B<Node> I<Nodename>
+
+The B<Node> block identifies a new Redis node, that is a new Redis instance
+running in an specified host and port. The name for node is a canonical
+identifier which is used as I<plugin instance>. It is limited to
+64E<nbsp>characters in length.
+
+=item B<Host> I<Hostname>
+
+The B<Host> option is the hostname or IP-address where the Redis instance is
+running on.
+
+=item B<Port> I<Port>
+
+The B<Port> option is the TCP port on which the Redis instance accepts
+connections. Either a service name of a port number may be given. Please note
+that numerical port numbers must be given as a string, too.
+
+=item B<Timeout> I<Timeout in miliseconds>
+
+The B<Timeout> option set the socket timeout for node response. Since the Redis
+read function is blocking, you should keep this value as low as possible. Keep
+in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
+than B<Interval> defined globally.
+
=back
=head2 Plugin C<rrdcached>
</Match>
<Match>
Regex "\\<R=local_user\\>"
+ ExcludeRegex "\\<R=local_user\\>.*mail_spool defer"
DSType "CounterInc"
Type "counter"
Instance "local_user"
Regex "SPAM \\(Score: (-?[0-9]+\\.[0-9]+)\\)"
+=item B<ExcludeRegex> I<regex>
+
+Sets an optional regular expression to use for excluding lines from the match.
+An example which excludes all connections from localhost from the match:
+
+ ExcludeRegex "127\\.0\\.0\\.1"
+
=item B<DSType> I<Type>
Sets how the values are cumulated. I<Type> is one of:
=item B<CounterSet>
-The matched number is a counter. Simply sets the internal counter to this
-value.
+=item B<DeriveSet>
+
+=item B<AbsoluteSet>
+
+The matched number is a counter. Simply I<sets> the internal counter to this
+value. Variants exist for C<COUNTER>, C<DERIVE>, and C<ABSOLUTE> data sources.
=item B<CounterAdd>
-Add the matched value to the internal counter.
+=item B<DeriveAdd>
+
+Add the matched value to the internal counter. In case of B<DeriveAdd>, the
+matched number may be negative, which will effectively subtract from the
+internal counter.
=item B<CounterInc>
-Increase the internal counter by one. This B<DSType> is the only one that does
-not use the matched subexpression, but simply counts the number of matched
+=item B<DeriveInc>
+
+Increase the internal counter by one. These B<DSType> are the only ones that do
+not use the matched subexpression, but simply count the number of matched
lines. Thus, you may use a regular expression without submatch in this case.
=back
As you'd expect the B<Gauge*> types interpret the submatch as a floating point
-number, using L<strtod(3)>. The B<CounterSet> and B<CounterAdd> interpret the
-submatch as an integer using L<strtoll(3)>. B<CounterInc> does not use the
-submatch at all and it may be omitted in this case.
+number, using L<strtod(3)>. The B<Counter*> and B<AbsoluteSet> types interpret
+the submatch as an unsigned integer using L<strtoull(3)>. The B<Derive*> types
+interpret the submatch as a signed integer using L<strtoll(3)>. B<CounterInc>
+and B<DeriveInc> do not use the submatch at all and it may be omitted in this
+case.
=item B<Type> I<Type>
=back
+=head2 Plugin C<varnish>
+
+The Varnish plugin collects information about Varnish, an HTTP accelerator.
+
+=over 4
+
+=item B<CollectCache> B<true>|B<false>
+
+Cache hits and misses. True by default.
+
+=item B<CollectConnections> B<true>|B<false>
+
+Number of client connections received, accepted and dropped. True by default.
+
+=item B<CollectBackend> B<true>|B<false>
+
+Back-end connection statistics, such as successful, reused,
+and closed connections. True by default.
+
+=item B<CollectSHM> B<true>|B<false>
+
+Statistics about the shared memory log, a memory region to store
+log messages which is flushed to disk when full. True by default.
+
+=item B<CollectESI> B<true>|B<false>
+
+Edge Side Includes (ESI) parse statistics. False by default.
+
+=item B<CollectFetch> B<true>|B<false>
+
+Statistics about fetches (HTTP requests sent to the backend). False by default.
+
+=item B<CollectHCB> B<true>|B<false>
+
+Inserts and look-ups in the crit bit tree based hash. Look-ups are
+divided into locked and unlocked look-ups. False by default.
+
+=item B<CollectSMA> B<true>|B<false>
+
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
+The umem storage component is Solaris specific. False by default.
+
+=item B<CollectSMS> B<true>|B<false>
+
+synth (synthetic content) storage statistics. This storage
+component is used internally only. False by default.
+
+=item B<CollectSM> B<true>|B<false>
+
+file (memory mapped file) storage statistics. False by default.
+
+=item B<CollectTotals> B<true>|B<false>
+
+Collects overview counters, such as the number of sessions created,
+the number of requests and bytes transferred. False by default.
+
+=item B<CollectWorkers> B<true>|B<false>
+
+Collect statistics about worker threads. False by default.
+
+=back
+
=head2 Plugin C<vmem>
The C<vmem> plugin collects information about the usage of virtual memory.
Defaults to B<Command>.
+=item B<StoreRates> B<true|false>
+
+If set to B<true>, convert counter values to rates. If set to B<false> (the
+default) counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
=back
=head1 THRESHOLD CONFIGURATION
Also, all values that match a threshold are considered to be relevant or
"interesting". As a consequence collectd will issue a notification if they are
-not received for twice the last timeout of the values. If, for example, some
-hosts sends it's CPU statistics to the server every 60 seconds, a notification
-will be dispatched after about 120 seconds. It may take a little longer because
-the timeout is checked only once each B<Interval> on the server.
+not received for B<Timeout> iterations. The B<Timeout> configuration option is
+explained in section L<"GLOBAL OPTIONS">. If, for example, B<Timeout> is set to
+"2" (the default) and some hosts sends it's CPU statistics to the server every
+60 seconds, a notification will be dispatched after about 120 seconds. It may
+take a little longer because the timeout is checked only once each B<Interval>
+on the server.
When a value comes within range again or is received after it was missing, an
"OKAY-notification" is dispatched.
WarningMin 100000000
</Type>
</Plugin>
+
+ <Type "load">
+ DataSource "midterm"
+ FailureMax 4
+ Hits 3
+ Hysteresis 3
+ </Type>
</Host>
</Threshold>
example for the "df" type, where you may want to issue a warning when less than
5E<nbsp>% of the total space is available. Defaults to B<false>.
+=item B<Hits> I<Value>
+
+Sets the number of occurrences which the threshold must be arised before to
+dispatch any notification or, in other words, the number of B<Interval>s
+than the threshold must be match before dispatch any notification.
+
+=item B<Hysteresis> I<Value>
+
+Sets the hysteresis value for threshold. The hysteresis is a method to
+prevent flapping between states, until a new received value for
+a previously matched threshold down below the threshold condition
+(B<WarningMax>, B<FailureMin> or everthing else) minus the hysteresis value,
+the failure (respectively warning) state will be keep.
+
+=item B<Interesting> B<true>|B<false>
+
+If set to B<true> (the default), the threshold must be treated as
+interesting and, when a number of B<Timeout> values will lost, then
+a missing notification will be dispatched. On the other hand, if set to
+B<false>, the missing notification will never dispatched for this threshold.
+
=back
=head1 FILTER CONFIGURATION
the identifier of a value. If multiple regular expressions are given, B<all>
regexen must match for a value to match.
+=item B<Invert> B<false>|B<true>
+
+When set to B<true>, the result of the match is inverted, i.e. all value lists
+where all regular expressions apply are not matched, all other value lists are
+matched. Defaults to B<false>.
+
=back
Example:
projects / collectd.git / blobdiff