BaseDir "/var/lib/collectd"
PIDFile "/run/collectd.pid"
Interval 10.0
-
+
LoadPlugin cpu
LoadPlugin load
-
+
<LoadPlugin df>
Interval 3600
</LoadPlugin>
<Plugin df>
ValuesPercentage true
</Plugin>
-
+
LoadPlugin ping
<Plugin ping>
Host "example.org"
B<LoadPlugin> statement. B<LoadPlugin> statements are still required for
plugins that don't provide any configuration, e.g. the I<Load plugin>.
+=item B<CollectInternalStats> B<false>|B<true>
+
+When set to B<true>, various statistics about the I<collectd> daemon will be
+collected, with "collectd" as the I<plugin name>. Defaults to B<false>.
+
+The "write_queue" I<plugin instance> reports the number of elements currently
+queued and the number of elements dropped off the queue by the
+B<WriteQueueLimitLow>/B<WriteQueueLimitHigh> mechanism.
+
+The "cache" I<plugin instance> reports the number of elements in the value list
+cache (the cache you can interact with using L<collectd-unixsock(5)>).
+
=item B<Include> I<Path> [I<pattern>]
If I<Path> points to a file, includes that file. If I<Path> points to a
I<you will have to delete all your RRD files> or know some serious RRDtool
magic! (Assuming you're using the I<RRDtool> or I<RRDCacheD> plugin.)
+=item B<MaxReadInterval> I<Seconds>
+
+Read plugin doubles interval between queries after each failed attempt
+to get data.
+
+This options limits the maximum value of the interval. The default value is
+B<86400>.
+
=item B<Timeout> I<Iterations>
Consider a value list "missing" when no update has been read or received for
unset, the latter will default to half of B<WriteQueueLimitHigh>.
If you do not want to randomly drop values when the queue size is between
-I<LowNum> and I<HighNum>, set If B<WriteQueueLimitHigh> and
-B<WriteQueueLimitLow> to same value.
+I<LowNum> and I<HighNum>, set B<WriteQueueLimitHigh> and B<WriteQueueLimitLow>
+to the same value.
+
+Enabling the B<CollectInternalStats> option is of great help to figure out the
+values to set B<WriteQueueLimitHigh> and B<WriteQueueLimitLow> to.
=item B<Hostname> I<Name>
<Aggregation>
Plugin "cpu"
Type "cpu"
-
+
GroupBy "Host"
GroupBy "TypeInstance"
-
+
CalculateSum true
CalculateAverage true
</Aggregation>
Plugin "cpu"
PluginInstance "/[0,2,4,6,8]$/"
Type "cpu"
-
+
SetPlugin "cpu"
SetPluginInstance "even-%{aggregation}"
-
+
GroupBy "Host"
GroupBy "TypeInstance"
-
+
CalculateAverage true
</Aggregation>
</Plugin>
# GraphiteSeparateInstances false
# GraphiteAlwaysAppendDS false
</Publish>
-
+
# Receive values from an AMQP broker
<Subscribe "some_name">
Host "localhost"
Exchange "amq.fanout"
# ExchangeType "fanout"
# Queue "queue_name"
+ # QueueDurable false
+ # QueueAutoDelete true
# RoutingKey "collectd.#"
</Subscribe>
</Plugin>
=item B<Queue> I<Queue> (Subscribe only)
-Configures the I<queue> name to subscribe to. If no queue name was configures
+Configures the I<queue> name to subscribe to. If no queue name was configured
explicitly, a unique queue name will be created by the broker.
+=item B<QueueDurable> B<true>|B<false> (Subscribe only)
+
+Defines if the I<queue> subscribed to is durable (saved to persistent storage)
+or transient (will disappear if the AMQP broker is restarted). Defaults to
+"false".
+
+This option should be used in conjunction with the I<Persistent> option on the
+publish side.
+
+=item B<QueueAutoDelete> B<true>|B<false> (Subscribe only)
+
+Defines if the I<queue> subscribed to will be deleted once the last consumer
+unsubscribes. Defaults to "true".
+
=item B<RoutingKey> I<Key>
In I<Publish> blocks, this configures the routing key to set on all outgoing
=back
+=head2 Plugin C<barometer>
+
+This plugin reads absolute air pressure using digital barometer sensor MPL115A2
+or MPL3115 from Freescale (sensor attached to any I2C bus available in
+the computer, for HW details see
+I<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL115A> or
+I<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL3115A2>).
+The sensor type - one fo these two - is detected automatically by the plugin
+and indicated in the plugin_instance (typically you will see subdirectory
+"barometer-mpl115" or "barometer-mpl3115").
+
+The plugin provides absolute barometric pressure, air pressure reduced to sea
+level (several possible approximations) and as an auxiliary value also internal
+sensor temperature. It uses (expects/provides) typical metric units - pressure
+in [hPa], temperature in [C], altitude in [m].
+
+It was developed and tested under Linux only. The only platform dependency is
+the standard Linux i2c-dev interface (the particular bus driver has to
+support the SM Bus command subset).
+
+The reduction or normalization to mean sea level pressure requires (depedning on
+selected method/approximation) also altitude and reference to temperature sensor(s).
+When multiple temperature sensors are configured the minumum of their values is
+always used (expecting that the warmer ones are affected by e.g. direct sun light
+at that moment).
+
+Synopsis:
+
+ <Plugin "barometer">
+ Device "/dev/i2c-0";
+ Oversampling 512
+ PressureOffset 0.0
+ TemperatureOffset 0.0
+ Normalization 2
+ Altitude 238.0
+ TemperatureSensor "myserver/onewire-F10FCA000800/temperature"
+ </Plugin>
+
+=over 4
+
+=item B<Device> I<device>
+
+Device name of the I2C bus to which the sensor is connected. Note that typically
+you need to have loaded the i2c-dev module.
+Using i2c-tools you can check/list i2c buses available on your system by:
+
+ i2cdetect -l
+
+Then you can scan for devices on given bus. E.g. to scan the whole bus 0 use:
+
+ i2cdetect -y -a 0
+
+This way you should be able to verify that the pressure sensor (either type) is
+connected and detected on address 0x60.
+
+=item B<Oversampling> I<value>
+
+For MPL115 this is the size of the averaging window. To filter out sensor noise
+a simple averaging using floating window of configurable size is used. The plugin
+will use average of the last C<value> measurements (value of 1 means no averaging).
+Minimal size is 1, maximal 1024.
+
+For MPL3115 this is the oversampling value. The actual oversampling is performed
+by the sensor and the higher value the higher accuracy and longer conversion time
+(although nothing to worry about in the collectd context). Supported values are:
+1, 2, 4, 8, 16, 32, 64 and 128. Any other value is adjusted by the plugin to
+the closest supported one. Default is 128.
+
+=item B<PressureOffset> I<offset>
+
+You can further calibrate the sensor by supplying pressure and/or temperature offsets.
+This is added to the measured/caclulated value (i.e. if the measured value is too high
+then use negative offset).
+In hPa, default is 0.0.
+
+=item B<TemperatureOffset> I<offset>
+
+You can further calibrate the sensor by supplying pressure and/or temperature offsets.
+This is added to the measured/caclulated value (i.e. if the measured value is too high
+then use negative offset).
+In C, default is 0.0.
+
+=item B<Normalization> I<method>
+
+Normalization method - what approximation/model is used to compute mean sea
+level pressure from the air absolute pressure.
+
+Supported values of the C<method> (integer between from 0 to 2) are:
+
+=over 5
+
+=item B<0> - no conversion, absolute pressrure is simply copied over. For this method you
+ do not need to configure C<Altitude> or C<TemperatureSensor>.
+
+=item B<1> - international formula for conversion ,
+See I<http://en.wikipedia.org/wiki/Atmospheric_pressure#Altitude_atmospheric_pressure_variation>.
+For this method you have to configure C<Altitude> but do not need C<TemperatureSensor>
+(uses fixed global temperature average instead).
+
+=item B<2> - formula as recommended by the Deutsche Wetterdienst (German
+Meteorological Service).
+See I<http://de.wikipedia.org/wiki/Barometrische_H%C3%B6henformel#Theorie>
+For this method you have to configure both C<Altitude> and C<TemperatureSensor>.
+
+=back
+
+
+=item B<Altitude> I<altitude>
+
+The altitude (in meters) of the location where you meassure the pressure.
+
+=item B<TemperatureSensor> I<reference>
+
+Temperature sensor which should be used as a reference when normalizing the pressure.
+When specified more sensors a minumum is found and uses each time.
+The temperature reading directly from this pressure sensor/plugin
+is typically not suitable as the pressure sensor
+will be probably inside while we want outside temperature.
+The collectd reference name is something like
+<hostname>/<plugin_name>-<plugin_instance>/<type>-<type_instance>
+(<type_instance> is usually omitted when there is just single value type).
+Or you can figure it out from the path of the output data files.
+
+=back
+
+=head2 Plugin C<battery>
+
+The I<battery plugin> reports the remaining capacity, power and voltage of
+laptop batteries.
+
+=over 4
+
+=item B<ValuesPercentage> B<false>|B<true>
+
+When enabled, remaining capacity is reported as a percentage, e.g. "42%
+capacity remaining". Otherwise the capacity is stored as reported by the
+battery, most likely in "Wh". This option does not work with all input methods,
+in particular when only C</proc/pmu> is available on an old Linux system.
+Defaults to B<false>.
+
+=item B<ReportDegraded> B<false>|B<true>
+
+Typical laptop batteries degrade over time, meaning the capacity decreases with
+recharge cycles. The maximum charge of the previous charge cycle is tracked as
+"last full capacity" and used to determine that a battery is "fully charged".
+
+When this option is set to B<false>, the default, the I<battery plugin> will
+only report the remaining capacity. If the B<ValuesPercentage> option is
+enabled, the relative remaining capacity is calculated as the ratio of the
+"remaining capacity" and the "last full capacity". This is what most tools,
+such as the status bar of desktop environments, also do.
+
+When set to B<true>, the battery plugin will report three values: B<charged>
+(remaining capacity), B<discharged> (difference between "last full capacity"
+and "remaining capacity") and B<degraded> (difference between "design capacity"
+and "last full capacity").
+
+=back
+
=head2 Plugin C<bind>
Starting with BIND 9.5.0, the most widely used DNS server software provides
ParseTime false
OpCodes true
QTypes true
-
+
ServerStats true
ZoneMaintStats true
ResolverStats false
MemoryStats true
-
+
<View "_default">
QTypes true
ResolverStats true
CacheRRSets true
-
+
Zone "127.in-addr.arpa/IN"
</View>
</Plugin>
=back
+=head2 Plugin C<conntrack>
+
+This plugin collects IP conntrack statistics.
+
+=over 4
+
+=item B<OldFiles>
+
+Assume the B<conntrack_count> and B<conntrack_max> files to be found in
+F</proc/sys/net/ipv4/netfilter> instead of F</proc/sys/net/netfilter/>.
+
+=back
+
+=head2 Plugin C<cpu>
+
+The I<CPU plugin> collects CPU usage metrics. By default, CPU usage is reported
+as Jiffies, using the C<cpu> type. Two aggregations are available:
+
+=over 4
+
+=item
+
+Sum, per-state, over all CPUs installed in the system; and
+
+=item
+
+Sum, per-CPU, over all non-idle states of a CPU, creating an "active" state.
+
+=back
+
+The two aggregations can be combined, leading to I<collectd> only emitting a
+single "active" metric for the entire system. As soon as one of these
+aggregations (or both) is enabled, the I<cpu plugin> will report a percentage,
+rather than Jiffies. In addition, you can request individual, per-state,
+per-CPU metrics to be reported as percentage.
+
+The following configuration options are available:
+
+=over 4
+
+=item B<ReportByState> B<true>|B<false>
+
+When set to B<true>, the default, reports per-state metrics, e.g. "system",
+"user" and "idle".
+When set to B<false>, aggregates (sums) all I<non-idle> states into one
+"active" metric.
+
+=item B<ReportByCpu> B<true>|B<false>
+
+When set to B<true>, the default, reports per-CPU (per-core) metrics.
+When set to B<false>, instead of reporting metrics for individual CPUs, only a
+global sum of CPU states is emitted.
+
+=item B<ValuesPercentage> B<false>|B<true>
+
+This option is only considered when both, B<ReportByCpu> and B<ReportByState>
+are set to B<true>. In this case, by default, metrics will be reported as
+Jiffies. By setting this option to B<true>, you can request percentage values
+in the un-aggregated (per-CPU, per-state) mode as well.
+
+=back
+
=head2 Plugin C<cpufreq>
This plugin doesn't have any options. It reads
URL "http://finance.google.com/finance?q=NYSE%3AAMD"
User "foo"
Password "bar"
+ Digest false
+ VerifyPeer true
+ VerifyHost true
+ CACert "/path/to/ca.crt"
+ Header "X-Custom-Header: foobar"
+ Post "foo=bar"
+
+ MeasureResponseTime false
+ MeasureResponseCode false
+
<Match>
Regex "<span +class=\"pr\"[^>]*> *([0-9]*\\.[0-9]+) *</span>"
DSType "GaugeAverage"
Password to use if authorization is required to read the page.
+=item B<Digest> B<true>|B<false>
+
+Enable HTTP digest authentication.
+
=item B<VerifyPeer> B<true>|B<false>
Enable or disable peer SSL certificate verification. See
Measure response time for the request. If this setting is enabled, B<Match>
blocks (see below) are optional. Disabled by default.
+=item B<MeasureResponseCode> B<true>|B<false>
+
+Measure response code for the request. If this setting is enabled, B<Match>
+blocks (see below) are optional. Disabled by default.
+
=item B<E<lt>MatchE<gt>>
One or more B<Match> blocks that define how to match information in the data
returned by C<libcurl>. The C<curl> plugin uses the same infrastructure that's
used by the C<tail> plugin, so please see the documentation of the C<tail>
-plugin below on how matches are defined. If the B<MeasureResponseTime> option
-is set to B<true>, B<Match> blocks are optional.
+plugin below on how matches are defined. If the B<MeasureResponseTime> or
+B<MeasureResponseCode> options are set to B<true>, B<Match> blocks are
+optional.
=back
Sets the plugin instance to I<Instance>.
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+URL. By default the global B<Interval> setting will be used.
+
=item B<User> I<Name>
+
=item B<Password> I<Password>
+
+=item B<Digest> B<true>|B<false>
+
=item B<VerifyPeer> B<true>|B<false>
+
=item B<VerifyHost> B<true>|B<false>
+
=item B<CACert> I<file>
+
=item B<Header> I<Header>
+
=item B<Post> I<Body>
These options behave exactly equivalent to the appropriate options of the
VerifyPeer true
VerifyHost true
CACert "/path/to/ca.crt"
+ Header "X-Custom-Header: foobar"
+ Post "foo=bar"
<XPath "table[@id=\"magic_level\"]/tr">
Type "magic_level"
=item B<Password> I<Password>
+=item B<Digest> B<true>|B<false>
+
=item B<VerifyPeer> B<true>|B<false>
=item B<VerifyHost> B<true>|B<false>
There must be at least one B<ValuesFrom> option inside each B<Result> block.
+=item B<MetadataFrom> [I<column0> I<column1> ...]
+
+Names the columns whose content is used as metadata for the data sets
+that are dispatched to the daemon.
+
+The actual data type in the columns is not that important. The plugin will
+automatically cast the values to the right type if it know how to do that. So
+it should be able to handle integer an floating point types, as well as strings
+(if they include a number at the beginning).
+
=back
=head3 B<Database> blocks
=item B<ValuesAbsolute> B<true>|B<false>
-Enables or disables reporting of free, used and used disk space in 1K-blocks.
-Defaults to true.
+Enables or disables reporting of free and used disk space in 1K-blocks.
+Defaults to B<true>.
-=item B<ValuesPercentage> B<true>|B<false>
+=item B<ValuesPercentage> B<false>|B<true>
-Enables or disables reporting of free, used and used disk space in percentage.
-Defaults to false.
+Enables or disables reporting of free and used disk space in percentage.
+Defaults to B<false>.
-This is useful for deploying collectd on the cloud, where machines with
-different disk size may exist. Then it is more practical to configure thresholds
-based on relative disk size.
+This is useful for deploying I<collectd> on the cloud, where machines with
+different disk size may exist. Then it is more practical to configure
+thresholds based on relative disk size.
=back
set to B<false>, B<only> matching disks will be collected. If B<IgnoreSelected>
is set to B<true>, all disks are collected B<except> the ones matched.
+=item B<UseBSDName> B<true>|B<false>
+
+Whether to use the device's "BSD Name", on MacE<nbsp>OSE<nbsp>X, instead of the
+default major/minor numbers. Requires collectd to be built with Apple's
+IOKitLib support.
+
+=item B<UdevNameAttr> I<Attribute>
+
+Attempt to override disk instance name with the value of a specified udev
+attribute when built with B<libudev>. If the attribute is not defined for the
+given device, the default name is used. Example:
+
+ UdevNameAttr "DM_NAME"
+
=back
=head2 Plugin C<dns>
=back
-=head2 Plugin C<libvirt>
+=head2 Plugin C<load>
-This plugin allows CPU, disk and network load to be collected for virtualized
-guests on the machine. This means that these characteristics can be collected
-for guest systems without installing any software on them - collectd only runs
-on the hosting system. The statistics are collected through libvirt
-(L<http://libvirt.org/>).
+The I<Load plugin> collects the system load. These numbers give a rough overview
+over the utilization of a machine. The system load is defined as the number of
+runnable tasks in the run-queue and is provided by many operating systems as a
+one, five or fifteen minute average.
-Only I<Connection> is required.
+The following configuration options are available:
=over 4
-=item B<Connection> I<uri>
-
-Connect to the hypervisor given by I<uri>. For example if using Xen use:
-
- Connection "xen:///"
-
-Details which URIs allowed are given at L<http://libvirt.org/uri.html>.
-
-=item B<RefreshInterval> I<seconds>
-
-Refresh the list of domains and devices every I<seconds>. The default is 60
-seconds. Setting this to be the same or smaller than the I<Interval> will cause
-the list of domains and devices to be refreshed on every iteration.
-
-Refreshing the devices in particular is quite a costly operation, so if your
-virtualization setup is static you might consider increasing this. If this
-option is set to 0, refreshing is disabled completely.
-
-=item B<Domain> I<name>
-
-=item B<BlockDevice> I<name:dev>
-
-=item B<InterfaceDevice> I<name:dev>
-
-=item B<IgnoreSelected> I<true>|I<false>
+=item B<ReportRelative> B<false>|B<true>
-Select which domains and devices are collected.
+When enabled, system load divided by number of available CPU cores is reported
+for intervals 1 min, 5 min and 15 min. Defaults to false.
-If I<IgnoreSelected> is not given or I<false> then only the listed domains and
-disk/network devices are collected.
+=back
-If I<IgnoreSelected> is I<true> then the test is reversed and the listed
-domains and disk/network devices are ignored, while the rest are collected.
-The domain name and device names may use a regular expression, if the name is
-surrounded by I</.../> and collectd was compiled with support for regexps.
+=head2 Plugin C<logfile>
-The default is to collect statistics for all domains and all their devices.
+=over 4
-Example:
+=item B<LogLevel> B<debug|info|notice|warning|err>
- BlockDevice "/:hdb/"
- IgnoreSelected "true"
+Sets the log-level. If, for example, set to B<notice>, then all events with
+severity B<notice>, B<warning>, or B<err> will be written to the logfile.
-Ignore all I<hdb> devices on any domain, but other block devices (eg. I<hda>)
-will be collected.
+Please note that B<debug> is only available if collectd has been compiled with
+debugging support.
-=item B<HostnameFormat> B<name|uuid|hostname|...>
+=item B<File> I<File>
-When the libvirt plugin logs data, it sets the hostname of the collected data
-according to this setting. The default is to use the guest name as provided by
-the hypervisor, which is equal to setting B<name>.
+Sets the file to write log messages to. The special strings B<stdout> and
+B<stderr> can be used to write to the standard output and standard error
+channels, respectively. This, of course, only makes much sense when I<collectd>
+is running in foreground- or non-daemon-mode.
-B<uuid> means use the guest's UUID. This is useful if you want to track the
-same guest across migrations.
+=item B<Timestamp> B<true>|B<false>
-B<hostname> means to use the global B<Hostname> setting, which is probably not
-useful on its own because all guests will appear to have the same name.
+Prefix all lines printed by the current time. Defaults to B<true>.
-You can also specify combinations of these fields. For example B<name uuid>
-means to concatenate the guest name and UUID (with a literal colon character
-between, thus I<"foo:1234-1234-1234-1234">).
+=item B<PrintSeverity> B<true>|B<false>
-=item B<InterfaceFormat> B<name>|B<address>
+When enabled, all lines are prefixed by the severity of the log message, for
+example "warning". Defaults to B<false>.
-When the libvirt plugin logs interface data, it sets the name of the collected
-data according to this setting. The default is to use the path as provided by
-the hypervisor (the "dev" property of the target node), which is equal to
-setting B<name>.
+=back
-B<address> means use the interface's mac address. This is useful since the
-interface path might change between reboots of a guest or across migrations.
+B<Note>: There is no need to notify the daemon after moving or removing the
+log file (e.E<nbsp>g. when rotating the logs). The plugin reopens the file
+for each line it writes.
-=back
+=head2 Plugin C<log_logstash>
-=head2 Plugin C<logfile>
+The I<log logstash plugin> behaves like the logfile plugin but formats
+messages as JSON events for logstash to parse and input.
=over 4
channels, respectively. This, of course, only makes much sense when I<collectd>
is running in foreground- or non-daemon-mode.
-=item B<Timestamp> B<true>|B<false>
-
-Prefix all lines printed by the current time. Defaults to B<true>.
-
-=item B<PrintSeverity> B<true>|B<false>
-
-When enabled, all lines are prefixed by the severity of the log message, for
-example "warning". Defaults to B<false>.
-
=back
B<Note>: There is no need to notify the daemon after moving or removing the
ShowCPU true
ShowCPUCores true
ShowMemory true
-
+
ShowTemperatures true
Temperature vddg
Temperature vddq
ShowPower true
Power total0
Power total1
- IgnoreSelectedPower true
+ IgnoreSelectedPower true
</Plugin>
The following options are valid inside the B<PluginE<nbsp>mic> block:
=item B<ShowCPU> B<true>|B<false>
-If enabled (the default) a sum of the CPU usage accross all cores is reported.
+If enabled (the default) a sum of the CPU usage across all cores is reported.
=item B<ShowCPUCores> B<true>|B<false>
=item fout
-Fan Out
+Fan Out
=item vccp
=item total0
-Total power utilization averaged over Time Window 0 (uWatts).
+Total power utilization averaged over Time Window 0 (uWatts).
=item total1
-Total power utilization averaged over Time Window 0 (uWatts).
+Total power utilization averaged over Time Window 0 (uWatts).
=item inst
=item imax
-Max instantaneous power (uWatts).
+Max instantaneous power (uWatts).
=item pcie
-PCI-E connector power (uWatts).
+PCI-E connector power (uWatts).
=item c2x3
-2x3 connector power (uWatts).
+2x3 connector power (uWatts).
=item c2x4
-2x4 connector power (uWatts).
+2x4 connector power (uWatts).
=item vccp
-Core rail (uVolts).
+Core rail (uVolts).
=item vddg
-Uncore rail (uVolts).
+Uncore rail (uVolts).
=item vddq
-Memory subsystem rail (uVolts).
+Memory subsystem rail (uVolts).
+
+=back
=back
+=head2 Plugin C<memory>
+
+The I<memory plugin> provides the following configuration options:
+
+=over 4
+
+=item B<ValuesAbsolute> B<true>|B<false>
+
+Enables or disables reporting of physical memory usage in absolute numbers,
+i.e. bytes. Defaults to B<true>.
+
+=item B<ValuesPercentage> B<false>|B<true>
+
+Enables or disables reporting of physical memory usage in percentages, e.g.
+percent of physical memory used. Defaults to B<false>.
+
+This is useful for deploying I<collectd> in a heterogeneous environment in
+which the sizes of physical memory vary.
+
=back
=head2 Plugin C<modbus>
-The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
-register values. It supports reading single registers (unsigned 16E<nbsp>bit
+The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP or Modbus/RTU and
+reads register values. It supports reading single registers (unsigned 16E<nbsp>bit
values), large integer values (unsigned 32E<nbsp>bit values) and floating point
values (two registers interpreted as IEEE floats in big endian notation).
<Data "voltage-input-1">
RegisterBase 0
RegisterType float
+ RegisterCmd ReadHolding
Type voltage
Instance "input-1"
</Data>
-
+
<Data "voltage-input-2">
RegisterBase 2
RegisterType float
+ RegisterCmd ReadHolding
Type voltage
Instance "input-2"
</Data>
-
+
+ <Data "supply-temperature-1">
+ RegisterBase 0
+ RegisterType Int16
+ RegisterCmd ReadHolding
+ Type temperature
+ Instance "temp-1"
+ </Data>
+
<Host "modbus.example.com">
Address "192.168.0.42"
Port "502"
Interval 60
-
+
<Slave 1>
Instance "power-supply"
Collect "voltage-input-1"
</Slave>
</Host>
-=over 4
-
-=item E<lt>B<Data> I<Name>E<gt> blocks
+ <Host "localhost">
+ Device "/dev/ttyUSB0"
+ Baudrate 38400
+ Interval 20
-Data blocks define a mapping between register numbers and the "types" used by
+ <Slave 1>
+ Instance "temperature"
+ Collect "supply-temperature-1"
+ </Slave>
+ </Host>
+
+=over 4
+
+=item E<lt>B<Data> I<Name>E<gt> blocks
+
+Data blocks define a mapping between register numbers and the "types" used by
I<collectd>.
Within E<lt>DataE<nbsp>/E<gt> blocks, the following options are allowed:
B<Uint32> or B<Float>, two 16E<nbsp>bit registers will be read and the data is
combined into one value. Defaults to B<Uint16>.
+=item B<RegisterCmd> B<ReadHolding>|B<ReadInput>
+
+Specifies register type to be collected from device. Works only with libmodbus
+2.9.2 or higher. Defaults to B<ReadHolding>.
+
=item B<Type> I<Type>
Specifies the "type" (data set) to use when dispatching the value to
=item B<Address> I<Hostname>
-Specifies the node name (the actual network address) used to connect to the
-host. This may be an IP address or a hostname. Please note that the used
-I<libmodbus> library only supports IPv4 at the moment.
+For Modbus/TCP, specifies the node name (the actual network address) used to
+connect to the host. This may be an IP address or a hostname. Please note that
+the used I<libmodbus> library only supports IPv4 at the moment.
=item B<Port> I<Service>
-Specifies the port used to connect to the host. The port can either be given as
-a number or as a service name. Please note that the I<Service> argument must be
-a string, even if ports are given in their numerical form. Defaults to "502".
+for Modbus/TCP, specifies the port used to connect to the host. The port can
+either be given as a number or as a service name. Please note that the
+I<Service> argument must be a string, even if ports are given in their numerical
+form. Defaults to "502".
+
+=item B<Device> I<Devicenode>
+
+For Modbus/RTU, specifies the path to the serial device being used.
+
+=item B<Baudrate> I<Baudrate>
+
+For Modbus/RTU, specifies the baud rate of the serial device.
+Note, connections currently support only 8/N/1.
=item B<Interval> I<Interval>
=item E<lt>B<Slave> I<ID>E<gt>
-Over each TCP connection, multiple Modbus devices may be reached. The slave ID
+Over each connection, multiple Modbus devices may be reached. The slave ID
is used to specify which device should be addressed. For each device you want
to query, one B<Slave> block must be given.
Password "password"
Port "3306"
MasterStats true
+ ConnectTimeout 10
</Database>
<Database bar>
+ Alias "squeeze"
Host "localhost"
Socket "/var/run/mysql/mysqld.sock"
SlaveStats true
=over 4
+=item B<Alias> I<Alias>
+
+Alias to use as sender instead of hostname when reporting. This may be useful
+when having cryptic hostnames.
+
=item B<Host> I<Hostname>
Hostname of the database server. Defaults to B<localhost>.
Otherwise, use the B<Port> option above. See the documentation for the
C<mysql_real_connect> function for details.
+=item B<InnodbStats> I<true|false>
+
+If enabled, metrics about the InnoDB storage engine are collected.
+Disabled by default.
+
=item B<MasterStats> I<true|false>
=item B<SlaveStats> I<true|false>
If enabled, the plugin sends a notification if the replication slave I/O and /
or SQL threads are not running. Defaults to B<false>.
+=item B<ConnectTimeout> I<Seconds>
+
+Sets the connect timeout for the MySQL client.
+
=back
=head2 Plugin C<netapp>
User "username"
Password "aef4Aebe"
Interval 30
-
+
<WAFL>
Interval 30
GetNameCache true
GetBufferCache true
GetInodeCache true
</WAFL>
-
+
<Disks>
Interval 30
GetBusy true
</Disks>
-
+
<VolumePerf>
Interval 30
GetIO "volume0"
GetLatency "volume0"
IgnoreSelectedLatency false
</VolumePerf>
-
+
<VolumeUsage>
Interval 30
GetCapacity "vol0"
GetSnapshot "vol3"
IgnoreSelectedSnapshot false
</VolumeUsage>
-
+
<Quota>
Interval 60
</Quota>
-
+
<Snapvault>
Interval 30
</Snapvault>
-
+
<System>
Interval 30
GetCPULoad true
# Export to an internal server
# (demonstrates usage without additional options)
Server "collectd.internal.tld"
-
+
# Export to an external server
# (demonstrates usage with signature options)
<Server "collectd.external.tld">
that the manual selection of an interface for unicast traffic is only
necessary in rare cases.
+=item B<ResolveInterval> I<Seconds>
+
+Sets the interval at which to re-resolve the DNS for the I<Host>. This is
+useful to force a regular DNS lookup to support a high availability setup. If
+not specified, re-resolves are never attempted.
+
=back
=item B<E<lt>Listen> I<Host> [I<Port>]B<E<gt>>
The C<onewire> plugin uses the B<owcapi> library from the B<owfs> project
L<http://owfs.org/> to read sensors connected via the onewire bus.
-Currently only temperature sensors (sensors with the family code C<10>,
-e.E<nbsp>g. DS1820, DS18S20, DS1920) can be read. If you have other sensors you
-would like to have included, please send a sort request to the mailing list.
+It can be used in two possible modes - standard or advanced.
+
+In the standard mode only temperature sensors (sensors with the family code
+C<10>, C<22> and C<28> - e.g. DS1820, DS18S20, DS1920) can be read. If you have
+other sensors you would like to have included, please send a sort request to
+the mailing list. You can select sensors to be read or to be ignored depending
+on the option B<IgnoreSelected>). When no list is provided the whole bus is
+walked and all sensors are read.
Hubs (the DS2409 chips) are working, but read the note, why this plugin is
experimental, below.
+In the advanced mode you can configure any sensor to be read (only numerical
+value) using full OWFS path (e.g. "/uncached/10.F10FCA000800/temperature").
+In this mode you have to list all the sensors. Neither default bus walk nor
+B<IgnoreSelected> are used here. Address and type (file) is extracted from
+the path automatically and should produce compatible structure with the "standard"
+mode (basically the path is expected as for example
+"/uncached/10.F10FCA000800/temperature" where it would extract address part
+"F10FCA000800" and the rest after the slash is considered the type - here
+"temperature").
+There are two advantages to this mode - you can access virtually any sensor
+(not just temperature), select whether to use cached or directly read values
+and it is slighlty faster. The downside is more complex configuration.
+
+The two modes are distinguished automatically by the format of the address.
+It is not possible to mix the two modes. Once a full path is detected in any
+B<Sensor> then the whole addressing (all sensors) is considered to be this way
+(and as standard addresses will fail parsing they will be ignored).
+
=over 4
=item B<Device> I<Device>
=item B<Sensor> I<Sensor>
-Selects sensors to collect or to ignore, depending on B<IgnoreSelected>, see
-below. Sensors are specified without the family byte at the beginning, to you'd
-use C<F10FCA000800>, and B<not> include the leading C<10.> family byte and
-point.
+In the standard mode selects sensors to collect or to ignore
+(depending on B<IgnoreSelected>, see below). Sensors are specified without
+the family byte at the beginning, so you have to use for example C<F10FCA000800>,
+and B<not> include the leading C<10.> family byte and point.
+When no B<Sensor> is configured the whole Onewire bus is walked and all supported
+sensors (see above) are read.
+
+In the advanced mode the B<Sensor> specifies full OWFS path - e.g.
+C</uncached/10.F10FCA000800/temperature> (or when cached values are OK
+C</10.F10FCA000800/temperature>). B<IgnoreSelected> is not used.
+
+As there can be multiple devices on the bus you can list multiple sensor (use
+multiple B<Sensor> elements).
=item B<IgnoreSelected> I<true>|I<false>
-If no configuration if given, the B<onewire> plugin will collect data from all
+If no configuration is given, the B<onewire> plugin will collect data from all
sensors found. This may not be practical, especially if sensors are added and
removed regularly. Sometimes, however, it's easier/preferred to collect only
specific sensors or all sensors I<except> a few specified ones. This option
B<Sensor> is inverted: All selected interfaces are ignored and all other
interfaces are collected.
+Used only in the standard mode - see above.
+
=item B<Interval> I<Seconds>
Sets the interval in which all sensors should be read. If not specified, the
change, though this is unlikely. Oh, and if you want to help improving this
plugin, just send a short notice to the mailing list. ThanksE<nbsp>:)
+=head2 Plugin C<openldap>
+
+To use the C<openldap> plugin you first need to configure the I<OpenLDAP>
+server correctly. The backend database C<monitor> needs to be loaded and
+working. See slapd-monitor(5) for the details.
+
+The configuration of the C<openldap> plugin consists of one or more B<Instance>
+blocks. Each block requires one string argument as the instance name. For
+example:
+
+ <Plugin "openldap">
+ <Instance "foo">
+ URL "ldap://localhost/"
+ </Instance>
+ <Instance "bar">
+ URL "ldaps://localhost/"
+ </Instance>
+ </Plugin>
+
+The instance name will be used as the I<plugin instance>. To emulate the old
+(versionE<nbsp>4) behavior, you can use an empty string (""). In order for the
+plugin to work correctly, each instance name must be unique. This is not
+enforced by the plugin and it is your responsibility to ensure it is.
+
+The following options are accepted within each B<Instance> block:
+
+=over 4
+
+=item B<URL> I<ldap://host/binddn>
+
+Sets the URL to use to connect to the I<OpenLDAP> server. This option is
+I<mandatory>.
+
+=item B<StartTLS> B<true|false>
+
+Defines whether TLS must be used when connecting to the I<OpenLDAP> server.
+Disabled by default.
+
+=item B<VerifyHost> B<true|false>
+
+Enables or disables peer host name verification. If enabled, the plugin checks
+if the C<Common Name> or a C<Subject Alternate Name> field of the SSL
+certificate matches the host name provided by the B<URL> option. If this
+identity check fails, the connection is aborted. Enabled by default.
+
+=item B<CACert> I<File>
+
+File that holds one or more SSL certificates. If you want to use TLS/SSL you
+may possibly need this option. What CA certificates are checked by default
+depends on the distribution you use and can be changed with the usual ldap
+client configuration mechanisms. See ldap.conf(5) for the details.
+
+=item B<Timeout> I<Seconds>
+
+Sets the timeout value for ldap operations. Defaults to B<-1> which results in
+an infinite timeout.
+
+=item B<Version> I<Version>
+
+An integer which sets the LDAP protocol version number to use when connecting
+to the I<OpenLDAP> server. Defaults to B<3> for using I<LDAPv3>.
+
+=back
+
=head2 Plugin C<openvpn>
The OpenVPN plugin reads a status file maintained by OpenVPN and gathers
Specify the password to be used when connecting to the server.
+=item B<ExpireDelay> I<delay>
+
+Skip expired values in query output.
+
=item B<SSLMode> I<disable>|I<allow>|I<prefer>|I<require>
Specify whether to use an SSL connection when contacting the server. The
following modes are supported:
-=item B<Instance> I<name>
-
-Specify the plugin instance name that should be used instead of the database
-name (which is the default, if this option has not been specified). This
-allows to query multiple databases of the same name on the same host (e.g.
-when running multiple database server versions in parallel).
-
=over 4
=item I<disable>
=back
+=item B<Instance> I<name>
+
+Specify the plugin instance name that should be used instead of the database
+name (which is the default, if this option has not been specified). This
+allows to query multiple databases of the same name on the same host (e.g.
+when running multiple database server versions in parallel).
+
=item B<KRBSrvName> I<kerberos_service_name>
Specify the Kerberos service name to use when authenticating with Kerberos 5
Host "localhost"
Port "6379"
Timeout 2000
+ <Query "LLEN myqueue">
+ Type "queue_length"
+ Instance "myqueue"
+ <Query>
</Node>
</Plugin>
in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
than B<Interval> defined globally.
+=item B<Query> I<Querystring>
+
+The B<Query> block identifies a query to execute against the redis server.
+There may be an arbitrary number of queries to execute.
+
+=item B<Type> I<Collectd type>
+
+Within a query definition, a valid collectd type to use as when submitting
+the result of the query. When not supplied, will default to B<gauge>.
+
+=item B<Instance> I<Type instance>
+
+Within a query definition, an optional type instance to use when submitting
+the result of the query. When not supplied will default to the escaped
+command, up to 64 chars.
+
=back
=head2 Plugin C<rrdcached>
=back
+=head2 Plugin C<smart>
+
+The C<smart> plugin collects SMART information from physical
+disks. Values collectd include temperature, power cycle count, poweron
+time and bad sectors. Also, all SMART attributes are collected along
+with the normalized current value, the worst value, the threshold and
+a human readable value.
+
+Using the following two options you can ignore some disks or configure the
+collection only of specific disks.
+
+=over 4
+
+=item B<Disk> I<Name>
+
+Select the disk I<Name>. Whether it is collected or ignored depends on the
+B<IgnoreSelected> setting, see below. As with other plugins that use the
+daemon's ignorelist functionality, a string that starts and ends with a slash
+is interpreted as a regular expression. Examples:
+
+ Disk "sdd"
+ Disk "/hda[34]/"
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Sets whether selected disks, i.E<nbsp>e. the ones matches by any of the B<Disk>
+statements, are ignored or if all other disks are ignored. The behavior
+(hopefully) is intuitive: If no B<Disk> option is configured, all disks are
+collected. If at least one B<Disk> option is given and no B<IgnoreSelected> or
+set to B<false>, B<only> matching disks will be collected. If B<IgnoreSelected>
+is set to B<true>, all disks are collected B<except> the ones matched.
+
+=back
+
=head2 Plugin C<snmp>
Since the configuration of the C<snmp plugin> is a little more complicated than
When enabled, the I<swap I/O> is reported in bytes. When disabled, the default,
I<swap I/O> is reported in pages. This option is available under Linux only.
+=item B<ValuesAbsolute> B<true>|B<false>
+
+Enables or disables reporting of absolute swap metrics, i.e. number of I<bytes>
+available and used. Defaults to B<true>.
+
+=item B<ValuesPercentage> B<false>|B<true>
+
+Enables or disables reporting of relative swap metrics, i.e. I<percent>
+available and free. Defaults to B<false>.
+
+This is useful for deploying I<collectd> in a heterogeneous environment, where
+swap sizes differ and you want to specify generic thresholds or similar.
+
=back
=head2 Plugin C<syslog>
<Plugin "tail">
<File "/var/log/exim4/mainlog">
Instance "exim"
+ Interval 60
<Match>
Regex "S=([1-9][0-9]*)"
DSType "CounterAdd"
next B<Instance> option. This way you can extract several plugin instances from
one logfile, handy when parsing syslog and the like.
+The B<Interval> option allows you to define the length of time between reads. If
+this is not set, the default Interval will be used.
+
Each B<Match> block has the following options to describe how the match should
be performed:
The matched number is a counter. Simply I<sets> the internal counter to this
value. Variants exist for C<COUNTER>, C<DERIVE>, and C<ABSOLUTE> data sources.
+=item B<GaugeAdd>
+
=item B<CounterAdd>
=item B<DeriveAdd>
matched number may be negative, which will effectively subtract from the
internal counter.
+=item B<GaugeInc>
+
=item B<CounterInc>
=item B<DeriveInc>
how many connections a web proxy holds to web servers. You have to give the
port in numeric form.
+=item B<AllPortsSummary> I<true>|I<false>
+
+If this option is set to I<true> a summary of statistics from all connections
+are collectd. This option defaults to I<false>.
+
=back
=head2 Plugin C<thermal>
=head2 Plugin C<varnish>
The I<varnish plugin> collects information about Varnish, an HTTP accelerator.
+It collects a subset of the values displayed by L<varnishstat(1)>, and
+organizes them in categories which can be enabled or disabled. Currently only
+metrics shown in L<varnishstat(1)>'s I<MAIN> section are collected. The exact
+meaning of each metric can be found in L<varnish-counters(7)>.
Synopsis:
<Plugin "varnish">
<Instance "example">
+ CollectBackend true
+ CollectBan false
CollectCache true
CollectConnections true
- CollectBackend true
- CollectSHM true
+ CollectDirectorDNS false
CollectESI false
CollectFetch false
CollectHCB false
+ CollectObjects false
+ CollectPurge false
+ CollectSession false
+ CollectSHM true
CollectSMA false
CollectSMS false
CollectSM false
+ CollectStruct false
CollectTotals false
+ CollectUptime false
+ CollectVCL false
+ CollectVSM false
CollectWorkers false
</Instance>
</Plugin>
=over 4
-=item B<CollectCache> B<true>|B<false>
-
-Cache hits and misses. True by default.
-
-=item B<CollectConnections> B<true>|B<false>
-
-Number of client connections received, accepted and dropped. True by default.
-
=item B<CollectBackend> B<true>|B<false>
Back-end connection statistics, such as successful, reused,
and closed connections. True by default.
-=item B<CollectSHM> B<true>|B<false>
-
-Statistics about the shared memory log, a memory region to store
-log messages which is flushed to disk when full. True by default.
-
=item B<CollectBan> B<true>|B<false>
Statistics about ban operations, such as number of bans added, retired, and
number of objects tested against ban operations. Only available with Varnish
-3.x. False by default.
+3.x and above. False by default.
+
+=item B<CollectCache> B<true>|B<false>
+
+Cache hits and misses. True by default.
+
+=item B<CollectConnections> B<true>|B<false>
+
+Number of client connections received, accepted and dropped. True by default.
=item B<CollectDirectorDNS> B<true>|B<false>
=item B<CollectSession> B<true>|B<false>
Client session statistics. Number of past and current sessions, session herd and
-linger counters, etc. False by default.
+linger counters, etc. False by default. Note that if using Varnish 4.x, some
+metrics found in the Connections and Threads sections with previous versions of
+Varnish have been moved here.
+
+=item B<CollectSHM> B<true>|B<false>
+
+Statistics about the shared memory log, a memory region to store
+log messages which is flushed to disk when full. True by default.
=item B<CollectSMA> B<true>|B<false>
=item B<CollectUptime> B<true>|B<false>
-Varnish uptime. False by default.
+Varnish uptime. Only available with Varnish 3.x and above. False by default.
=item B<CollectVCL> B<true>|B<false>
Number of total (available + discarded) VCL (config files). False by default.
+=item B<CollectVSM> B<true>|B<false>
+
+Collect statistics about Varnish's shared memory usage (used by the logging and
+statistics subsystems). Only available with Varnish 4.x. False by default.
+
=item B<CollectWorkers> B<true>|B<false>
Collect statistics about worker threads. False by default.
=back
+=head2 Plugin C<virt>
+
+This plugin allows CPU, disk and network load to be collected for virtualized
+guests on the machine. This means that these metrics can be collected for guest
+systems without installing any software on them - I<collectd> only runs on the
+host system. The statistics are collected through libvirt
+(L<http://libvirt.org/>).
+
+Only I<Connection> is required.
+
+=over 4
+
+=item B<Connection> I<uri>
+
+Connect to the hypervisor given by I<uri>. For example if using Xen use:
+
+ Connection "xen:///"
+
+Details which URIs allowed are given at L<http://libvirt.org/uri.html>.
+
+=item B<RefreshInterval> I<seconds>
+
+Refresh the list of domains and devices every I<seconds>. The default is 60
+seconds. Setting this to be the same or smaller than the I<Interval> will cause
+the list of domains and devices to be refreshed on every iteration.
+
+Refreshing the devices in particular is quite a costly operation, so if your
+virtualization setup is static you might consider increasing this. If this
+option is set to 0, refreshing is disabled completely.
+
+=item B<Domain> I<name>
+
+=item B<BlockDevice> I<name:dev>
+
+=item B<InterfaceDevice> I<name:dev>
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Select which domains and devices are collected.
+
+If I<IgnoreSelected> is not given or B<false> then only the listed domains and
+disk/network devices are collected.
+
+If I<IgnoreSelected> is B<true> then the test is reversed and the listed
+domains and disk/network devices are ignored, while the rest are collected.
+
+The domain name and device names may use a regular expression, if the name is
+surrounded by I</.../> and collectd was compiled with support for regexps.
+
+The default is to collect statistics for all domains and all their devices.
+
+Example:
+
+ BlockDevice "/:hdb/"
+ IgnoreSelected "true"
+
+Ignore all I<hdb> devices on any domain, but other block devices (eg. I<hda>)
+will be collected.
+
+=item B<HostnameFormat> B<name|uuid|hostname|...>
+
+When the virt plugin logs data, it sets the hostname of the collected data
+according to this setting. The default is to use the guest name as provided by
+the hypervisor, which is equal to setting B<name>.
+
+B<uuid> means use the guest's UUID. This is useful if you want to track the
+same guest across migrations.
+
+B<hostname> means to use the global B<Hostname> setting, which is probably not
+useful on its own because all guests will appear to have the same name.
+
+You can also specify combinations of these fields. For example B<name uuid>
+means to concatenate the guest name and UUID (with a literal colon character
+between, thus I<"foo:1234-1234-1234-1234">).
+
+=item B<InterfaceFormat> B<name>|B<address>
+
+When the virt plugin logs interface data, it sets the name of the collected
+data according to this setting. The default is to use the path as provided by
+the hypervisor (the "dev" property of the target node), which is equal to
+setting B<name>.
+
+B<address> means use the interface's mac address. This is useful since the
+interface path might change between reboots of a guest or across migrations.
+
+=item B<PluginInstanceFormat> B<name|uuid>
+
+When the virt plugin logs data, it sets the plugin_instance of the collected
+data according to this setting. The default is to use the guest name as provided
+by the hypervisor, which is equal to setting B<name>.
+
+B<uuid> means use the guest's UUID.
+
+=back
+
=head2 Plugin C<vmem>
The C<vmem> plugin collects information about the usage of virtual memory.
=back
+=head2 Plugin C<write_tsdb>
+
+The C<write_tsdb> plugin writes data to I<OpenTSDB>, a scalable open-source
+time series database. The plugin connects to a I<TSD>, a masterless, no shared
+state daemon that ingests metrics and stores them in HBase. The plugin uses
+I<TCP> over the "line based" protocol with a default port 4242. The data will
+be sent in blocks of at most 1428 bytes to minimize the number of network
+packets.
+
+Synopsis:
+
+ <Plugin write_tsdb>
+ <Node "example">
+ Host "tsd-1.my.domain"
+ Port "4242"
+ HostTags "status=production"
+ </Node>
+ </Plugin>
+
+The configuration consists of one or more E<lt>B<Node>E<nbsp>I<Name>E<gt>
+blocks. Inside the B<Node> blocks, the following options are recognized:
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<4242>.
+
+
+=item B<HostTags> I<String>
+
+When set, I<HostTags> is added to the end of the metric. It is intended to be
+used for name=value pairs that the TSD will tag the metric with. Dots and
+whitespace are I<not> escaped in this string.
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true>, convert counter values to rates. If set to B<false>
+(the default) counter values are stored as is, as an increasing
+integer number.
+
+=item B<AlwaysAppendDS> B<false>|B<true>
+
+If set the B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=back
+
=head2 Plugin C<write_mongodb>
The I<write_mongodb plugin> will send values to I<MongoDB>, a schema-less
=head2 Plugin C<write_http>
-This output plugin submits values to an http server by POST them using the
-PUTVAL plain-text protocol. Each destination you want to post data to needs to
-have one B<URL> block, within which the destination can be configured further,
-for example by specifying authentication data.
+This output plugin submits values to an HTTP server using POST requests and
+encoding metrics with JSON or using the C<PUTVAL> command described in
+L<collectd-unixsock(5)>.
Synopsis:
<Plugin "write_http">
- <URL "http://example.com/post-collectd">
+ <Node "example">
+ URL "http://example.com/post-collectd"
User "collectd"
Password "weCh3ik0"
- </URL>
+ Format JSON
+ </Node>
</Plugin>
-B<URL> blocks need one string argument which is used as the URL to which data
-is posted. The following options are understood within B<URL> blocks.
+The plugin can send values to multiple HTTP servers by specifying one
+E<lt>B<Node>E<nbsp>I<Name>E<gt> block for each server. Within each B<Node>
+block, the following options are available:
=over 4
+=item B<URL> I<URL>
+
+URL to which the values are submitted to. Mandatory.
+
=item B<User> I<Username>
Optional user name needed for authentication.
possibly need this option. What CA certificates come bundled with C<libcurl>
and are checked by default depends on the distribution you use.
+=item B<CAPath> I<Directory>
+
+Directory holding one or more CA certificate files. You can use this if for
+some reason all the needed CA certificates aren't in the same file and can't be
+pointed to using the B<CACert> option. Requires C<libcurl> to be built against
+OpenSSL.
+
+=item B<ClientKey> I<File>
+
+File that holds the private key in PEM format to be used for certificate-based
+authentication.
+
+=item B<ClientCert> I<File>
+
+File that holds the SSL certificate to be used for certificate-based
+authentication.
+
+=item B<ClientKeyPass> I<Password>
+
+Password required to load the private key in B<ClientKey>.
+
+=item B<SSLVersion> B<SSLv2>|B<SSLv3>|B<TLSv1>|B<TLSv1_0>|B<TLSv1_1>|B<TLSv1_2>
+
+Define which SSL protocol version must be used. By default C<libcurl> will
+attempt to figure out the remote SSL protocol version. See
+L<curl_easy_setopt(3)> for more details.
+
=item B<Format> B<Command>|B<JSON>
Format of the output to generate. If set to B<Command>, will create output that
=item B<StoreRates> B<true|false>
If set to B<true>, convert counter values to rates. If set to B<false> (the
-default) counter values are stored as is, i.E<nbsp>e. as an increasing integer
-number.
+default) counter values are stored as is, i.e. as an increasing integer number.
+
+=item B<BufferSize> I<Bytes>
+
+Sets the send buffer size to I<Bytes>. By increasing this buffer, less HTTP
+requests will be generated, but more metrics will be batched / metrics are
+cached for longer before being sent, introducing additional delay until they
+are available on the server side. I<Bytes> must be at least 1024 and cannot
+exceed the size of an C<int>, i.e. 2E<nbsp>GByte.
+Defaults to C<4096>.
+
+=back
+
+=head2 Plugin C<write_kafka>
+
+The I<write_kafka plugin> will send values to a I<Kafka> topic, a distributed
+queue.
+Synopsis:
+
+ <Plugin "write_kafka">
+ Property "metadata.broker.list" "broker1:9092,broker2:9092"
+ <Topic "collectd">
+ Format JSON
+ </Topic>
+ </Plugin>
+
+The following options are understood by the I<write_kafka plugin>:
+
+=over 4
+
+=item E<lt>B<Topic> I<Name>E<gt>
+
+The plugin's configuration consists of one or more B<Topic> blocks. Each block
+is given a unique I<Name> and specifies one kafka producer.
+Inside the B<Topic> block, the following per-topic options are
+understood:
+
+=over 4
+
+=item B<Property> I<String> I<String>
+
+Configure the named property for the current topic. Properties are
+forwarded to the kafka producer library B<librdkafka>.
+
+=item B<Key> I<String>
+
+Use the specified string as a partioning key for the topic. Kafka breaks
+topic into partitions and guarantees that for a given topology, the same
+consumer will be used for a specific key. The special (case insensitive)
+string B<Random> can be used to specify that an arbitrary partition should
+be used.
+
+=item B<Format> B<Command>|B<JSON>|B<Graphite>
+
+Selects the format in which messages are sent to the broker. If set to
+B<Command> (the default), values are sent as C<PUTVAL> commands which are
+identical to the syntax used by the I<Exec> and I<UnixSock plugins>.
+
+If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
+an easy and straight forward exchange format.
+
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+C<E<lt>metricE<gt> E<lt>valueE<gt> E<lt>timestampE<gt>\n>.
+
+=item B<StoreRates> B<true>|B<false>
+
+Determines whether or not C<COUNTER>, C<DERIVE> and C<ABSOLUTE> data sources
+are converted to a I<rate> (i.e. a C<GAUGE> value). If set to B<false> (the
+default), no conversion is performed. Otherwise the conversion is performed
+using the internal value cache.
+
+Please note that currently this option is only used if the B<Format> option has
+been set to B<JSON>.
+
+=item B<GraphitePrefix> (B<Format>=I<Graphite> only)
+
+A prefix can be added in the metric name when outputting in the I<Graphite>
+format. It's added before the I<Host> name.
+Metric name will be
+C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+
+=item B<GraphitePostfix> (B<Format>=I<Graphite> only)
+
+A postfix can be added in the metric name when outputting in the I<Graphite>
+format. It's added after the I<Host> name.
+Metric name will be
+C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+
+=item B<GraphiteEscapeChar> (B<Format>=I<Graphite> only)
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is C<_> (I<Underscore>).
+
+=item B<GraphiteSeparateInstances> B<false>|B<true>
+
+If set to B<true>, the plugin instance and type instance will be in their own
+path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
+default), the plugin and plugin instance (and likewise the type and type
+instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+
+=item B<StoreRates> B<true>|B<false>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer number.
+
+This will be reflected in the C<ds_type> tag: If B<StoreRates> is enabled,
+converted values will have "rate" appended to the data source type, e.g.
+C<ds_type:derive:rate>.
+
+=back
+
+=item B<Property> I<String> I<String>
+
+Configure the kafka producer through properties, you almost always will
+want to set B<metadata.broker.list> to your Kafka broker list.
=back
=head2 Plugin C<write_riemann>
-The I<write_riemann plugin> will send values to I<Riemann>, a powerfull stream
+The I<write_riemann plugin> will send values to I<Riemann>, a powerful stream
aggregation and monitoring system. The plugin sends I<Protobuf> encoded data to
I<Riemann> using UDP packets.
TTLFactor 2.0
</Node>
Tag "foobar"
+ Attribute "foo" "bar"
</Plugin>
The following options are understood by the I<write_riemann plugin>:
=item B<Protocol> B<UDP>|B<TCP>
Specify the protocol to use when communicating with I<Riemann>. Defaults to
-B<UDP>.
+B<TCP>.
+
+=item B<Batch> B<true>|B<false>
+
+If set to B<true> and B<Protocol> is set to B<TCP>,
+events will be batched in memory and flushed at
+regular intervals or when B<BatchMaxSize> is exceeded.
+
+Notifications are not batched and sent as soon as possible.
+
+When enabled, it can occur that events get processed by the Riemann server
+close to or after their expiration time. Tune the B<TTLFactor> and
+B<BatchMaxSize> settings according to the amount of values collected, if this
+is an issue.
+
+Defaults to true
+
+=item B<BatchMaxSize> I<size>
+
+Maximum payload size for a riemann packet. Defaults to 8192
=item B<StoreRates> B<true>|B<false>
know exactly what you're doing, you should only increase this setting from its
default value.
+=item B<Notifications> B<false>|B<true>
+
+If set to B<true>, create riemann events for notifications. This is B<true>
+by default. When processing thresholds from write_riemann, it might prove
+useful to avoid getting notification events.
+
+=item B<CheckThresholds> B<false>|B<true>
+
+If set to B<true>, attach state to events based on thresholds defined
+in the B<Threshold> plugin. Defaults to B<false>.
+
+=item B<EventServicePrefix> I<String>
+
+Add the given string as a prefix to the event service name.
+If B<EventServicePrefix> not set or set to an empty string (""),
+no prefix will be used.
+
=back
=item B<Tag> I<String>
Add the given string as an additional tag to the metric being sent to
I<Riemann>.
+=item B<Attribute> I<String> I<String>
+
+Consider the two given strings to be the key and value of an additional
+attribute for each metric being sent out to I<Riemann>.
+
+=back
+
+=head2 Plugin C<zookeeper>
+
+The I<zookeeper plugin> will collect statistics from a I<Zookeeper> server
+using the mntr command. It requires Zookeeper 3.4.0+ and access to the
+client port.
+
+B<Synopsis:>
+
+ <Plugin "zookeeper">
+ Host "127.0.0.1"
+ Port "2181"
+ </Plugin>
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<2181>.
+
=back
=head1 THRESHOLD CONFIGURATION
Max 100
Satisfy "All"
</Match>
-
+
# Match if the value of any data source is outside the range of 0 - 100.
<Match "value">
Min 0
<Target "replace">
# Replace "example.net" with "example.com"
Host "\\<example.net\\>" "example.com"
-
+
# Strip "www." from hostnames
Host "\\<www\\." ""
</Target>
=head1 AUTHOR
-Florian Forster E<lt>octo@verplant.orgE<gt>
+Florian Forster E<lt>octo@collectd.orgE<gt>
=cut
projects / collectd.git / blobdiff