If system event log (SEL) is enabled, plugin will listen for sensor threshold
and discrete events. When event is received the notification is sent.
+SEL event filtering can be configured using B<SELSensor> and B<SELIgnoreSelected>
+config options.
Defaults to B<false>.
+=item B<SELSensor> I<SELSensor>
+
+Selects sensors to get events from or to ignore, depending on B<SELIgnoreSelected>.
+
+See F</"IGNORELISTS"> for details.
+
+=item B<SELIgnoreSelected> I<true>|I<false>
+
+If no configuration is given, the B<ipmi> plugin will pass events from all
+sensors. This option enables you to do that: By setting B<SELIgnoreSelected>
+to I<true> the effect of B<SELSensor> is inverted: All events from selected
+sensors are ignored and all events from other sensors are passed.
+
=item B<SELClearEvent> I<true>|I<false>
If SEL clear event is enabled, plugin will delete event from SEL list after
=head2 Plugin C<redis>
-The I<Redis plugin> connects to one or more Redis servers and gathers
-information about each server's state. For each server there is a I<Node> block
-which configures the connection parameters for this node.
+The I<Redis plugin> connects to one or more Redis servers, gathers
+information about each server's state and executes user-defined queries.
+For each server there is a I<Node> block which configures the connection
+parameters and set of user-defined queries for this node.
+Server state is requested by sending I<INFO> query.
<Plugin redis>
<Node "example">
Host "localhost"
Port "6379"
Timeout 2000
+ ReportCommandStats false
<Query "LLEN myqueue">
+ #Database 0
Type "queue_length"
Instance "myqueue"
- <Query>
+ </Query>
</Node>
</Plugin>
-The information shown in the synopsis above is the I<default configuration>
-which is used by the plugin if no configuration is present.
-
=over 4
=item B<Node> I<Nodename>
The B<Node> block identifies a new Redis node, that is a new Redis instance
running in an specified host and port. The name for node is a canonical
identifier which is used as I<plugin instance>. It is limited to
-64E<nbsp>characters in length.
+128E<nbsp>characters in length.
+
+When no B<Node> is configured explicitly, plugin connects to "localhost:6379".
=item B<Host> I<Hostname>
=item B<Timeout> I<Milliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
-read function is blocking, you should keep this value as low as possible. Keep
-in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
-than B<Interval> defined globally.
+read function is blocking, you should keep this value as low as possible.
+It is expected what B<Timeout> values should be lower than B<Interval> defined
+globally.
+
+Defaults to 2000 (2 seconds).
+
+=item B<ReportCommandStats> B<false>|B<true>
+
+Enables or disables reporting of statistics based on the command type, including
+rate of command calls and average CPU time consumed.
+Defaults to B<false>.
=item B<Query> I<Querystring>
The B<Query> block identifies a query to execute against the redis server.
-There may be an arbitrary number of queries to execute.
+There may be an arbitrary number of queries to execute. Each query should
+return single string or integer.
=item B<Type> I<Collectd type>
-Within a query definition, a valid collectd type to use as when submitting
+Within a query definition, a valid I<collectd type> to use as when submitting
the result of the query. When not supplied, will default to B<gauge>.
+Currently only types with one datasource are supported.
+See L<types.db(5)> for more details on types and their configuration.
+
=item B<Instance> I<Type instance>
Within a query definition, an optional type instance to use when submitting
the result of the query. When not supplied will default to the escaped
-command, up to 64 chars.
+command, up to 128 chars.
+
+=item B<Database> I<Index>
+
+This index selects the Redis logical database to use for query. Defaults
+to C<0>.
=back
IndexOID "IF-MIB::ifIndex"
SizeOID "IF-MIB::ifNumber"
<Data "ifDescr">
- Instance true
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
Plugin "interface"
OIDs "IF-MIB::ifDescr"
</Data>
OIDs "IF-MIB::ifInOctets" "IF-MIB::ifOutOctets"
</Data>
</Table>
+ <Table "CPUAffinityTable">
+ <Data "DomainName">
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
+ Plugin "virt"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhAffinityDomainName"
+ </Data>
+ <Data "VCPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_([0-9]{1,3})-cpu_[0-9]{1,3}$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhVCPUIndex"
+ </Data>
+ <Data "CPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_[0-9]{1,3}-cpu_([0-9]{1,3})$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUIndex"
+ </Data>
+ <Data "CPUAffinity">
+ Plugin "virt"
+ Type "cpu_affinity"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUAffinity"
+ </Data>
+ </Table>
</Plugin>
There are two types of blocks that can be contained in the
C<E<lt>PluginE<nbsp> snmp_agentE<gt>> block: B<Data> and B<Table>:
-=head3 The B<Data> block
+=head3 B<Data> block
The B<Data> block defines a list OIDs that are to be handled. This block can
define scalar or table OIDs. If B<Data> block is defined inside of B<Table>
=over 4
-=item B<Instance> I<true|false>
+=item B<IndexKey> block
+
+B<IndexKey> block contains all data needed for proper index build of snmp table.
+In case more than
+one table B<Data> block has B<IndexKey> block present then multiple key index is
+built. If B<Data> block defines scalar data type B<IndexKey> has no effect and can
+be omitted.
-When B<Instance> is set to B<true>, the value for requested OID is copied from
-plugin instance field of corresponding collectd value. If B<Data> block defines
-scalar data type B<Instance> has no effect and can be omitted.
+=over 8
+
+=item B<Source> I<String>
+
+B<Source> can be set to one of the following values: "Hostname", "Plugin",
+"PluginInstance", "Type", "TypeInstance". This value indicates which field of
+corresponding collectd metric is taken as a SNMP table index.
+
+=item B<Regex> I<String>
+
+B<Regex> option can also be used to parse strings or numbers out of
+specific field. For example: type-instance field which is "vcpu1-cpu2" can be
+parsed into two numeric fields CPU = 2 and VCPU = 1 and can be later used
+as a table index.
+
+=item B<Group> I<Number>
+
+B<Group> number can be specified in case groups are used in regex.
+
+=back
=item B<Plugin> I<String>
projects / collectd.git / blobdiff