# GraphiteEscapeChar "_"
# GraphiteSeparateInstances false
# GraphiteAlwaysAppendDS false
+ # GraphitePreserveSeparator false
</Publish>
# Receive values from an AMQP broker
identifier. If set to B<false> (the default), this is only done when there is
more than one DS.
+=item B<GraphitePreserveSeparator> B<false>|B<true>
+
+If set to B<false> (the default) the C<.> (dot) character is replaced with
+I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
+is preserved, i.e. passed through.
+
=back
=head2 Plugin C<apache>
and "remaining capacity") and B<degraded> (difference between "design capacity"
and "last full capacity").
+=item B<QueryStateFS> B<false>|B<true>
+
+When set to B<true>, the battery plugin will only read statistics
+related to battery performance as exposed by StateFS at
+/run/state. StateFS is used in Mer-based Sailfish OS, for
+example.
+
=back
=head2 Plugin C<bind>
=back
+=head2 Plugin C<dpdkstat>
+
+The I<dpdkstat plugin> collects information about DPDK interfaces using the
+extended NIC stats API in DPDK.
+
+B<Synopsis:>
+
+ <Plugin "dpdkstat">
+ Coremask "0x4"
+ MemoryChannels "4"
+ ProcessType "secondary"
+ FilePrefix "rte"
+ EnabledPortMask 0xffff
+ PortName "interface1"
+ PortName "interface2"
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Coremask> I<Mask>
+
+A string containing an hexadecimal bit mask of the cores to run on. Note that
+core numbering can change between platforms and should be determined beforehand.
+
+=item B<Memorychannels> I<Channels>
+
+A string containing a number of memory channels per processor socket.
+
+=item B<ProcessType> I<type>
+
+A string containing the type of DPDK process instance.
+
+=item B<FilePrefix> I<File>
+
+The prefix text used for hugepage filenames. The filename will be set to
+/var/run/.<prefix>_config where prefix is what is passed in by the user.
+
+=item B<SocketMemory> I<MB>
+
+A string containing amount of Memory to allocate from hugepages on specific
+sockets in MB
+
+=item B<EnabledPortMask> I<Mask>
+
+A hexidecimal bit mask of the DPDK ports which should be enabled. A mask
+of 0x0 means that all ports will be disabled. A bitmask of all Fs means
+that all ports will be enabled. This is an optional argument - default
+is all ports enabled.
+
+=item B<PortName> I<Name>
+
+A string containing an optional name for the enabled DPDK ports. Each PortName
+option should contain only one port name; specify as many PortName options as
+desired. Default naming convention will be used if PortName is blank. If there
+are less PortName options than there are enabled ports, the default naming
+convention will be used for the additional ports.
+
+=back
+
=head2 Plugin C<email>
=over 4
=back
+=head2 Plugin C<hugepages>
+
+To collect B<hugepages> information, collectd reads directories
+"/sys/devices/system/node/*/hugepages" and
+"/sys/kernel/mm/hugepages".
+Reading of these directories can be disabled by the following
+options (default is enabled).
+
+=over 4
+
+=item B<ReportPerNodeHP> B<true>|B<false>
+
+If enabled, information will be collected from the hugepage
+counters in "/sys/devices/system/node/*/hugepages".
+This is used to check the per-node hugepage statistics on
+a NUMA system.
+
+=item B<ReportRootHP> B<true>|B<false>
+
+If enabled, information will be collected from the hugepage
+counters in "/sys/kernel/mm/hugepages".
+This can be used on both NUMA and non-NUMA systems to check
+the overall hugepage statistics.
+
+=item B<ValuesPages> B<true>|B<false>
+
+Whether to report hugepages metrics in number of pages.
+Defaults to B<true>.
+
+=item B<ValuesBytes> B<false>|B<true>
+
+Whether to report hugepages metrics in bytes.
+Defaults to B<false>.
+
+=item B<ValuesPercentage> B<false>|B<true>
+
+Whether to report hugepages metrics as percentage.
+Defaults to B<false>.
+
+=back
+
+=head2 Plugin C<intel_rdt>
+
+The I<intel_rdt> plugin collects information provided by monitoring features of
+Intel Resource Director Technology (Intel(R) RDT) like Cache Monitoring
+Technology (CMT), Memory Bandwidth Monitoring (MBM). These features provide
+information about utilization of shared resources. CMT monitors last level cache
+occupancy (LLC). MBM supports two types of events reporting local and remote
+memory bandwidth. Local memory bandwidth (MBL) reports the bandwidth of
+accessing memory associated with the local socket. Remote memory bandwidth (MBR)
+reports the bandwidth of accessing the remote socket. Also this technology
+allows to monitor instructions per clock (IPC).
+Monitor events are hardware dependant. Monitoring capabilities are detected on
+plugin initialization and only supported events are monitored.
+
+B<Synopsis:>
+
+ <Plugin "intel_rdt">
+ Cores "0-2" "3,4,6" "8-10,15"
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Interval> I<seconds>
+
+The interval within which to retrieve statistics on monitored events in seconds.
+For milliseconds divide the time by 1000 for example if the desired interval
+is 50ms, set interval to 0.05. Due to limited capacity of counters it is not
+recommended to set interval higher than 1 sec.
+
+=item B<Cores> I<cores groups>
+
+All events are reported on a per core basis. Monitoring of the events can be
+configured for group of cores (aggregated statistics). This field defines groups
+of cores on which to monitor supported events. The field is represented as list
+of strings with core group values. Each string represents a list of cores in a
+group. Allowed formats are:
+ 0,1,2,3
+ 0-10,20-18
+ 1,3,5-8,10,0x10-12
+
+If an empty string is provided as value for this field default cores
+configuration is applied - a separate group is created for each core.
+
+=back
+
+B<Note:> By default global interval is used to retrieve statistics on monitored
+events. To configure a plugin specific interval use B<Interval> option of the
+intel_rdt <LoadPlugin> block. For milliseconds divide the time by 1000 for
+example if the desired interval is 50ms, set interval to 0.05.
+Due to limited capacity of counters it is not recommended to set interval higher
+than 1 sec.
+
=head2 Plugin C<interface>
=over 4
The B<memcached plugin> connects to a memcached server and queries statistics
about cache utilization, memory and bandwidth used.
-L<http://www.danga.com/memcached/>
+L<http://memcached.org/>
<Plugin "memcached">
<Instance "name">
- Host "memcache.example.com"
+ #Host "memcache.example.com"
+ Address "127.0.0.1"
Port 11211
</Instance>
</Plugin>
=item B<Host> I<Hostname>
-Hostname to connect to. Defaults to B<127.0.0.1>.
+Sets the B<host> field of dispatched values. Defaults to the global hostname
+setting.
+For backwards compatibility, values are also dispatched with the global
+hostname when B<Host> is set to B<127.0.0.1> or B<localhost> and B<Address> is
+not set.
+
+=item B<Address> I<Address>
+
+Hostname or IP to connect to. For backwards compatibility, defaults to the
+value of B<Host> or B<127.0.0.1> if B<Host> is unset.
=item B<Port> I<Port>
-TCP-Port to connect to. Defaults to B<11211>.
+TCP port to connect to. Defaults to B<11211>.
=item B<Socket> I<Path>
Connect to I<memcached> using the UNIX domain socket at I<Path>. If this
-setting is given, the B<
Host> and B<Port> settings are ignored.
+setting is given, the B<
Address> and B<Port> settings are ignored.
=back
=item B<$1>
-The timestamp of the queried value as a floating point number.
+The timestamp of the queried value as an RFC 3339-formatted local time.
=item B<$2>
Use the last number found.
+=item B<GaugePersist>
+
+Use the last number found. The number is not reset at the end of an interval.
+It is continously reported until another number is matched. This is intended
+for cases in which only state changes are reported, for example a thermometer
+that only reports the temperature when it changes.
+
=item B<CounterSet>
=item B<DeriveSet>
Ignore all I<hdb> devices on any domain, but other block devices (eg. I<hda>)
will be collected.
+=item B<BlockDeviceFormat> B<target>|B<source>
+
+If I<BlockDeviceFormat> is set to B<target>, the default, then the device name
+seen by the guest will be used for reporting metrics.
+This corresponds to the C<E<lt>targetE<gt>> node in the XML definition of the
+domain.
+
+If I<BlockDeviceFormat> is set to B<source>, then metrics will be reported
+using the path of the source, e.g. an image file.
+This corresponds to the C<E<lt>sourceE<gt>> node in the XML definition of the
+domain.
+
+B<Example:>
+
+If the domain XML have the following device defined:
+
+ <disk type='block' device='disk'>
+ <driver name='qemu' type='raw' cache='none' io='native' discard='unmap'/>
+ <source dev='/var/lib/libvirt/images/image1.qcow2'/>
+ <target dev='sda' bus='scsi'/>
+ <boot order='2'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+
+Setting C<BlockDeviceFormat target> will cause the I<type instance> to be set
+to C<sda>.
+Setting C<BlockDeviceFormat source> will cause the I<type instance> to be set
+to C<var_lib_libvirt_images_image1.qcow2>.
+
+=item B<BlockDeviceFormatBasename> B<false>|B<true>
+
+The B<BlockDeviceFormatBasename> controls whether the full path or the
+L<basename(1)> of the source is being used as the I<type instance> when
+B<BlockDeviceFormat> is set to B<source>. Defaults to B<false>.
+
+B<Example:>
+
+Assume the device path (source tag) is C</var/lib/libvirt/images/image1.qcow2>.
+Setting C<BlockDeviceFormatBasename false> will cause the I<type instance> to
+be set to C<var_lib_libvirt_images_image1.qcow2>.
+Setting C<BlockDeviceFormatBasename true> will cause the I<type instance> to be
+set to C<image1.qcow2>.
+
=item B<HostnameFormat> B<name|uuid|hostname|...>
When the virt plugin logs data, it sets the hostname of the collected data
identifier. If set to B<false> (the default), this is only done when there is
more than one DS.
+=item B<PreserveSeparator> B<false>|B<true>
+
+If set to B<false> (the default) the C<.> (dot) character is replaced with
+I<EscapeCharacter>. Otherwise, if set to B<true>, the C<.> (dot) character
+is preserved, i.e. passed through.
+
+=item B<DropDuplicateFields> B<false>|B<true>
+
+If set to B<true>, detect and remove duplicate components in Graphite metric
+names. For example, the metric name C<host.load.load.shortterm> will
+be shortened to C<host.load.shortterm>.
+
+=back
+
+=head2 Plugin C<write_log>
+
+The C<write_log> plugin writes metrics as INFO log messages.
+
+This plugin supports two output formats: I<Graphite> and I<JSON>.
+
+Synopsis:
+
+ <Plugin write_log>
+ Format Graphite
+ </Plugin>
+
+=over 4
+
+=item B<Format> I<Format>
+
+The output format to use. Can be one of C<Graphite> or C<JSON>.
+
=back
=head2 Plugin C<write_tsdb>
=back
+=head2 Plugin C<write_prometheus>
+
+The I<write_prometheus plugin> implements a tiny webserver that can be scraped
+using I<Prometheus>.
+
+B<Options:>
+
+=over 4
+
+=item B<Port> I<Port>
+
+Port the embedded webserver should listen on. Defaults to B<9103>.
+
+=item B<StalenessDelta> I<Seconds>
+
+Time in seconds after which I<Prometheus> considers a metric "stale" if it
+hasn't seen any update for it. This value must match the setting in Prometheus.
+It defaults to B<300> seconds (5 minutes), same as Prometheus.
+
+B<Background:>
+
+I<Prometheus> has a global setting, C<StalenessDelta>, which controls after
+which time a metric without updates is considered "stale". This setting
+effectively puts an upper limit on the interval in which metrics are reported.
+
+When the I<write_prometheus plugin> encounters a metric with an interval
+exceeding this limit, it will inform you, the user, and provide the metric to
+I<Prometheus> B<without> a timestamp. That causes I<Prometheus> to consider the
+metric "fresh" each time it is scraped, with the time of the scrape being
+considered the time of the update. The result is that there appear more
+datapoints in I<Prometheus> than were actually created, but at least the metric
+doesn't disappear periodically.
+
+=back
+
=head2 Plugin C<write_http>
This output plugin submits values to an HTTP server using POST requests and
default), the plugin and plugin instance (and likewise the type and type
instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+=item B<GraphiteAlwaysAppendDS> B<true>|B<false>
+
+If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=item B<GraphitePreserveSeparator> B<false>|B<true>
+
+If set to B<false> (the default) the C<.> (dot) character is replaced with
+I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
+is preserved, i.e. passed through.
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to
=item B<TypeInstance> I<Regex>
+=item B<MetaData> I<String> I<Regex>
+
Match values where the given regular expressions match the various fields of
the identifier of a value. If multiple regular expressions are given, B<all>
regexen must match for a value to match.
=item B<TypeInstance> I<Regex> I<Replacement>
+=item B<MetaData> I<String> I<Regex> I<Replacement>
+
+=item B<DeleteMetaData> I<String> I<Regex>
+
Match the appropriate field with the given regular expression I<Regex>. If the
regular expression matches, that part that matches is replaced with
I<Replacement>. If multiple places of the input buffer match a given regular
=item B<MetaData> I<String> I<String>
-Set the appropriate field to the given string. The strings for plugin instance
-and type instance may be empty, the strings for host and plugin may not be
-empty. It's currently not possible to set the type of a value this way.
+Set the appropriate field to the given string. The strings for plugin instance,
+type instance, and meta data may be empty, the strings for host and plugin may
+not be empty. It's currently not possible to set the type of a value this way.
+
+The following placeholders will be replaced by an appropriate value:
+
+=over 4
+
+=item B<%{host}>
+
+=item B<%{plugin}>
+
+=item B<%{plugin_instance}>
+
+=item B<%{type}>
+
+=item B<%{type_instance}>
+
+These placeholders are replaced by the identifier field of the same name.
+
+=item B<%{meta:>I<name>B<}>
+
+These placeholders are replaced by the meta data value with the given name.
+
+=back
+
+Please note that these placeholders are B<case sensitive>!
+
+=item B<DeleteMetaData> I<String>
+
+Delete the named meta data field.
=back
projects / collectd.git / blobdiff