=head2 Plugin C<amqp>
The I<AMQP plugin> can be used to communicate with other instances of
-I<collectd> or third party applications using an AMQP message broker. Values
-are sent to or received from the broker, which handles routing, queueing and
-possibly filtering out messages.
+I<collectd> or third party applications using an AMQP 0.9.1 message broker.
+Values are sent to or received from the broker, which handles routing,
+queueing and possibly filtering out messages.
B<Synopsis:>
=back
+=head2 Plugin C<amqp1>
+
+The I<AMQP1 plugin> can be used to communicate with other instances of
+I<collectd> or third party applications using an AMQP 1.0 message
+intermediary. Metric values or notifications are sent to the
+messaging intermediary which may handle direct messaging or
+queue based transfer.
+
+B<Synopsis:>
+
+ <Plugin "amqp1">
+ # Send values to an AMQP 1.0 intermediary
+ <Transport "name">
+ Host "localhost"
+ Port "5672"
+ User "guest"
+ Password "guest"
+ Address "collectd"
+# RetryDelay 1
+ <Instance "some_name">
+ Format "command"
+ PreSettle false
+ Notify false
+ # StoreRates false
+ # GraphitePrefix "collectd."
+ # GraphiteEscapeChar "_"
+ # GraphiteSeparateInstances false
+ # GraphiteAlwaysAppendDS false
+ # GraphitePreserveSeparator false
+ </Instance>
+ </Transport>
+ </Plugin>
+
+The plugin's configuration consists of a I<Transport> that configures
+communications to the AMQP 1.0 messaging bus and one or more I<Instance>
+corresponding to metric or event publishers to the messaging system.
+
+The address in the I<Transport> block concatenated with the name given in the
+I<Instance> block starting tag will be used as the send-to address for
+communications over the messaging link.
+
+The following options are accepted within each I<Transport> block:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the AMQP 1.0 intermediary. Defaults to the
+default behavior of the underlying communications library,
+I<libqpid-proton>, which is "localhost".
+
+=item B<Port> I<Port>
+
+Service name or port number on which the AMQP 1.0 intermediary accepts
+connections. This argument must be a string, even if the numeric form
+is used. Defaults to "5672".
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+Credentials used to authenticate to the AMQP 1.0 intermediary. By
+default "guest"/"guest" is used.
+
+=item B<Address> I<Address>
+
+This option specifies the prefix for the send-to value in the message.
+By default, "collectd" will be used.
+
+=item B<RetryDelay> I<RetryDelay>
+
+When the AMQP1 connection is lost, defines the time in seconds to wait
+before attempting to reconnect. Defaults to 1, which implies attempt
+to reconnect at 1 second intervals.
+
+=back
+
+The following options are accepted within each I<Instance> block:
+
+=over 4
+
+=item B<Format> B<Command>|B<JSON>|B<Graphite>
+
+Selects the format in which messages are sent to the intermediary. If set to
+B<Command> (the default), values are sent as C<PUTVAL> commands which are
+identical to the syntax used by the I<Exec> and I<UnixSock plugins>. In this
+case, the C<Content-Type> header field will be set to C<text/collectd>.
+
+If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
+an easy and straight forward exchange format. The C<Content-Type> header field
+will be set to C<application/json>.
+
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+"<metric> <value> <timestamp>\n". The C<Content-Type> header field will be set to
+C<text/graphite>.
+
+A subscribing client I<should> use the C<Content-Type> header field to
+determine how to decode the values.
+
+=item B<PreSettle> B<true>|B<false>
+
+If set to B<false> (the default), the plugin will wait for a message
+acknowledgement from the messaging bus before sending the next
+message. This indicates transfer of ownership to the messaging
+system. If set to B<true>, the plugin will not wait for a message
+acknowledgement and the message may be dropped prior to transfer of
+ownership.
+
+=item B<Notify> B<true>|B<false>
+
+If set to B<false> (the default), the plugin will service the
+instance write call back as a value list. If set to B<true> the
+plugin will service the instance as a write notification callback
+for alert formatting.
+
+=item B<StoreRates> B<true>|B<false>
+
+Determines whether or not C<COUNTER>, C<DERIVE> and C<ABSOLUTE> data sources
+are converted to a I<rate> (i.e. a C<GAUGE> value). If set to B<false> (the
+default), no conversion is performed. Otherwise the conversion is performed
+using the internal value cache.
+
+Please note that currently this option is only used if the B<Format> option has
+been set to B<JSON>.
+
+=item B<GraphitePrefix>
+
+A prefix can be added in the metric name when outputting in the I<Graphite> format.
+It's added before the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphitePostfix>
+
+A postfix can be added in the metric name when outputting in the I<Graphite> format.
+It's added after the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphiteEscapeChar>
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is "_" (I<Underscore>).
+
+=item B<GraphiteSeparateInstances> B<true>|B<false>
+
+If set to B<true>, the plugin instance and type instance will be in their own
+path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
+default), the plugin and plugin instance (and likewise the type and type
+instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+
+=item B<GraphiteAlwaysAppendDS> B<true>|B<false>
+
+If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=item B<GraphitePreserveSeparator> B<false>|B<true>
+
+If set to B<false> (the default) the C<.> (dot) character is replaced with
+I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
+is preserved, i.e. passed through.
+
+=back
+
=head2 Plugin C<apache>
To configure the C<apache>-plugin you first need to configure the Apache
<Plugin curl>
<Page "stock_quotes">
+ Plugin "quotes"
URL "http://finance.google.com/finance?q=NYSE%3AAMD"
User "foo"
Password "bar"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<curl>.
+
=item B<URL> I<URL>
URL of the web site to retrieve. Since a regular expression will be used to
B<MeasureResponseCode> options are set to B<true>, B<Match> blocks are
optional.
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+URL. By default the global B<Interval> setting will be used.
+
=item B<Timeout> I<Milliseconds>
The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
Use I<Name> as the host name when submitting values. Defaults to the global
host name setting.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<curl_json>.
+
=item B<Instance> I<Instance>
Sets the plugin instance to I<Instance>.
<Plugin "curl_xml">
<URL "http://localhost/stats.xml">
Host "my_host"
+ #Plugin "curl_xml"
Instance "some_instance"
User "collectd"
Password "thaiNg0I"
Type "magic_level"
#InstancePrefix "prefix-"
InstanceFrom "td[1]"
+ #PluginInstanceFrom "td[1]"
ValuesFrom "td[2]/span[@class=\"level\"]"
</XPath>
</URL>
Use I<Name> as the host name when submitting values. Defaults to the global
host name setting.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to 'curl_xml'.
+
=item B<Instance> I<Instance>
-Use I<Instance> as the plugin instance when submitting values. Defaults to an
-empty string (no plugin instance).
+Use I<Instance> as the plugin instance when submitting values.
+May be overridden by B<PluginInstanceFrom> option inside B<XPath> blocks.
+Defaults to an empty string (no plugin instance).
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+URL. By default the global B<Interval> setting will be used.
=item B<Namespace> I<Prefix> I<URL>
XPath expression must return exactly one element. The element's value is then
used as I<type instance>, possibly prefixed with I<InstancePrefix> (see above).
-This value is required. As a special exception, if the "base XPath expression"
-(the argument to the B<XPath> block) returns exactly one argument, then this
-option may be omitted.
+=item B<PluginInstanceFrom> I<PluginInstanceFrom>
+
+Specifies a XPath expression to use for determining the I<plugin instance>. The
+XPath expression must return exactly one element. The element's value is then
+used as I<plugin instance>.
+
+=back
+
+If the "base XPath expression" (the argument to the B<XPath> block) returns
+exactly one argument, then I<InstanceFrom> and I<PluginInstanceFrom> may be omitted.
+Otherwise, at least one of I<InstanceFrom> or I<PluginInstanceFrom> is required.
+
+=over 4
=item B<ValuesFrom> I<ValuesFrom> [I<ValuesFrom> ...]
I<type> specified with B<Type> (see above). Each XPath expression must return
exactly one element. The element's value is then parsed as a number and used as
value for the appropriate value in the value list dispatched to the daemon.
+This option is required.
=back
</Result>
</Query>
<Database "product_information">
+ #Plugin "warehouse"
Driver "mysql"
Interval 120
DriverOption "host" "localhost"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<dbi>.
+
=item B<Interval> I<Interval>
Sets the interval (in seconds) in which the values will be collected from this
MemoryChannels "4"
FilePrefix "rte"
SocketMemory "1024"
+ LogLevel "7"
+ RteDriverLibPath "/usr/lib/dpdk-pmd"
</EAL>
SharedMemObj "dpdk_collectd_stats_0"
EnabledPortMask 0xffff
A string containing amount of Memory to allocate from hugepages on specific
sockets in MB. This is an optional value.
+=item B<LogLevel> I<LogLevel_number>
+
+A string containing log level number. This parameter is optional.
+If parameter is not present then default value "7" - (INFO) is used.
+Value "8" - (DEBUG) can be set to enable debug traces.
+
+=item B<RteDriverLibPath> I<Path>
+
+A string containing path to shared pmd driver lib or path to directory,
+where shared pmd driver libs are available. This parameter is optional.
+This parameter enable loading of shared pmd driver libs from defined path.
+E.g.: "/usr/lib/dpdk-pmd/librte_pmd_i40e.so"
+or "/usr/lib/dpdk-pmd"
+
=back
=over 3
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to B<filecount>.
+
=item B<Instance> I<Instance>
-Sets the plugin instance to I<Instance>. That instance name must be unique, but
-it's your responsibility, the plugin doesn't check for that. If not given, the
-instance is set to the directory name with all slashes replaced by underscores
-and all leading underscores removed.
+Sets the plugin instance to I<Instance>. If not given, the instance is set to
+the directory name with all slashes replaced by underscores and all leading
+underscores removed. Empty value is allowed.
=item B<Name> I<Pattern>
"Hidden" files and directories are those, whose name begins with a dot.
Defaults to I<false>, i.e. by default hidden files and directories are ignored.
+=item B<RegularOnly> I<true>|I<false>
+
+Controls whether or not to include only regular files in the count.
+Defaults to I<true>, i.e. by default non regular files are ignored.
+
+=item B<FilesSizeType> I<Type>
+
+Sets the type used to dispatch files combined size. Empty value ("") disables
+reporting. Defaults to B<bytes>.
+
+=item B<FilesCountType> I<Type>
+
+Sets the type used to dispatch number of files. Empty value ("") disables
+reporting. Defaults to B<files>.
+
+=item B<TypeInstance> I<Instance>
+
+Sets the I<type instance> used to dispatch values. Defaults to an empty string
+(no plugin instance).
+
=back
=head2 Plugin C<GenericJMX>
Filenames specifying SSL certificate and key material to be used with SSL
connections.
+=item B<VerifyPeer> B<true>|B<false>
+
+When enabled, a valid client certificate is required to connect to the server.
+When disabled, a client certifiacte is not requested and any unsolicited client
+certificate is accepted.
+Enabled by default.
+
=back
=back
ReportSoftwareEvents true
EventList "/var/cache/pmu/GenuineIntel-6-2D-core.json"
HardwareEvents "L2_RQSTS.CODE_RD_HIT,L2_RQSTS.CODE_RD_MISS" "L2_RQSTS.ALL_CODE_RD"
+ Cores "0-3" "4,6" "[12-15]"
</Plugin>
B<Options:>
This field is a list of event names or groups of comma separated event names.
This option requires B<EventList> option to be configured.
+=item B<Cores> I<cores groups>
+
+All events are reported on a per core basis. Monitoring of the events can be
+configured for a group of cores (aggregated statistics). This field defines
+groups of cores on which to monitor supported events. The field is represented
+as list of strings with core group values. Each string represents a list of
+cores in a group. If a group is enclosed in square brackets each core is added
+individually to a separate group (that is statistics are not aggregated).
+Allowed formats are:
+ 0,1,2,3
+ 0-10,20-18
+ 1,3,5-8,10,0x10-12
+ [4-15,32-63]
+
+If an empty string is provided as value for this field default cores
+configuration is applied - that is separate group is created for each core.
+
=back
=head2 Plugin C<intel_rdt>
=head2 Plugin C<ipmi>
+The B<ipmi plugin> allows to monitor server platform status using the Intelligent
+Platform Management Interface (IPMI). Local and remote interfaces are supported.
+
+The plugin configuration consists of one or more B<Instance> blocks which
+specify one I<ipmi> connection each. Each block requires one unique string
+argument as the instance name. If instances are not configured, an instance with
+the default option values will be created.
+
+For backwards compatibility, any option other than B<Instance> block will trigger
+legacy config handling and it will be treated as an option within B<Instance>
+block. This support will go away in the next major version of Collectd.
+
+Within the B<Instance> blocks, the following options are allowed:
+
=over 4
+=item B<Address> I<Address>
+
+Hostname or IP to connect to. If not specified, plugin will try to connect to
+local management controller (BMC).
+
+=item B<Username> I<Username>
+
+=item B<Password> I<Password>
+
+The username and the password to use for the connection to remote BMC.
+
+=item B<AuthType> I<MD5>|I<rmcp+>
+
+Forces the authentication type to use for the connection to remote BMC.
+By default most secure type is seleted.
+
+=item B<Host> I<Hostname>
+
+Sets the B<host> field of dispatched values. Defaults to the global hostname
+setting.
+
=item B<Sensor> I<Sensor>
Selects sensors to collect or to ignore, depending on B<IgnoreSelected>.
If you have for example dual power supply and one of them is (un)plugged then
a notification is sent.
+=item B<NotifyIPMIConnectionState> I<true>|I<false>
+
+If a IPMI connection state changes after initialization time of a minute
+a notification is sent. Defaults to B<false>.
+
+=item B<SELEnabled> I<true>|I<false>
+
+If system event log (SEL) is enabled, plugin will listen for sensor threshold
+and discrete events. When event is received the notification is sent.
+SEL event filtering can be configured using B<SELSensor> and B<SELIgnoreSelected>
+config options.
+Defaults to B<false>.
+
+=item B<SELSensor> I<SELSensor>
+
+Selects sensors to get events from or to ignore, depending on B<SELIgnoreSelected>.
+
+See F</"IGNORELISTS"> for details.
+
+=item B<SELIgnoreSelected> I<true>|I<false>
+
+If no configuration is given, the B<ipmi> plugin will pass events from all
+sensors. This option enables you to do that: By setting B<SELIgnoreSelected>
+to I<true> the effect of B<SELSensor> is inverted: All events from selected
+sensors are ignored and all events from other sensors are passed.
+
+=item B<SELClearEvent> I<true>|I<false>
+
+If SEL clear event is enabled, plugin will delete event from SEL list after
+it is received and successfully handled. In this case other tools that are
+subscribed for SEL events will receive an empty event.
+Defaults to B<false>.
+
=back
=head2 Plugin C<iptables>
<Page "plugin_instance">
Server "localhost"
Key "page_key"
+ Plugin "plugin_name"
<Match>
Regex "(\\d+) bytes sent"
DSType CounterAdd
When connected to the memcached server, asks for the page I<Key>.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<memcachec>.
+
=item E<lt>B<Match>E<gt>
Match blocks define which strings to look for and how matches substrings are
The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP or Modbus/RTU and
reads register values. It supports reading single registers (unsigned 16E<nbsp>bit
-values), large integer values (unsigned 32E<nbsp>bit values) and floating point
-values (two registers interpreted as IEEE floats in big endian notation).
+values), large integer values (unsigned 32E<nbsp>bit and 64E<nbsp>bit values) and
+floating point values (two registers interpreted as IEEE floats in big endian
+notation).
B<Synopsis:>
RegisterCmd ReadHolding
Type voltage
Instance "input-1"
+ #Scale 1.0
+ #Shift 0.0
</Data>
<Data "voltage-input-2">
B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
register will be read (the register number is increased by one).
-=item B<RegisterType> B<Int16>|B<Int32>|B<Uint16>|B<Uint32>|B<Float>
-
-Specifies what kind of data is returned by the device. If the type is B<Int32>,
-B<Uint32> or B<Float>, two 16E<nbsp>bit registers will be read and the data is
-combined into one value. Defaults to B<Uint16>.
+=item B<RegisterType> B<Int16>|B<Int32>|B<Int64>|B<Uint16>|B<Uint32>|B<UInt64>|B<Float>|B<Int32LE>|B<Uint32LE>|B<FloatLE>
+
+Specifies what kind of data is returned by the device. This defaults to
+B<Uint16>. If the type is B<Int32>, B<Int32LE>, B<Uint32>, B<Uint32LE>,
+B<Float> or B<FloatLE>, two 16E<nbsp>bit registers at B<RegisterBase>
+and B<RegisterBase+1> will be read and the data is combined into one
+32E<nbsp>value. For B<Int32>, B<Uint32> and B<Float> the most significant
+16E<nbsp>bits are in the register at B<RegisterBase> and the least
+significant 16E<nbsp>bits are in the register at B<RegisterBase+1>.
+For B<Int32LE>, B<Uint32LE>, or B<Float32LE>, the high and low order
+registers are swapped with the most significant 16E<nbsp>bits in
+the B<RegisterBase+1> and the least significant 16E<nbsp>bits in
+B<RegisterBase>. If the type is B<Int64> or B<UInt64>, four 16E<nbsp>bit
+registers at B<RegisterBase>, B<RegisterBase+1>, B<RegisterBase+2> and
+B<RegisterBase+3> will be read and the data combined into one
+64E<nbsp>value.
=item B<RegisterCmd> B<ReadHolding>|B<ReadInput>
=item B<Instance> I<Instance>
-Sets the type instance to use when dispatching the value to I<collectd>. If
+Sets the type instance to use when dispatching the value to I<Instance>. If
unset, an empty string (no type instance) is used.
+=item B<Scale> I<Value>
+
+The values taken from device are multiplied by I<Value>. The field is optional
+and the default is B<1.0>.
+
+=item B<Shift> I<Value>
+
+I<Value> is added to values from device after they have been multiplied by
+B<Scale> value. The field is optional and the default value is B<0.0>.
+
=back
=item E<lt>B<Host> I<Name>E<gt> blocks
that the manual selection of an interface for unicast traffic is only
necessary in rare cases.
+=item B<BindAddress> I<IP Address>
+
+Set the outgoing IP address for IP packets. This option can be used instead of
+the I<Interface> option to explicitly define the IP address which will be used
+to send Packets to the remote server.
+
=item B<ResolveInterval> I<Seconds>
Sets the interval at which to re-resolve the DNS for the I<Host>. This is
</Result>
</Query>
<Database "product_information">
+ #Plugin "warehouse"
ConnectID "db01"
Username "oracle"
Password "secret"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<oracle>.
+
=item B<ConnectID> I<ID>
Defines the "database alias" or "service name" to connect to. Usually, these
enable the interface, OVS DB daemon should be running with C<--remote=ptcp:>
option. See L<ovsdb-server(1)> for more details. The option may be either
network hostname, IPv4 numbers-and-dots notation or IPv6 hexadecimal string
-format. Defaults to B<'localhost'>.
+format. Defaults to C<localhost>.
=item B<Port> I<service>
enable the interface, OVS DB daemon should be running with C<--remote=ptcp:>
option. See L<ovsdb-server(1)> for more details. The option may be either
network hostname, IPv4 numbers-and-dots notation or IPv6 hexadecimal string
-format. Defaults to B<'localhost'>.
+format. Defaults to C<localhost>.
=item B<Port> I<service>
=back
+=head2 Plugin C<pcie_errors>
+
+The I<pcie_errors> plugin collects PCI Express errors from Device Status in Capability
+structure and from Advanced Error Reporting Extended Capability where available.
+At every read it polls config space of PCI Express devices and dispatches
+notification for every error that is set. It checks for new errors at every read.
+The device is indicated in plugin_instance according to format "domain:bus:dev.fn".
+Errors are divided into categories indicated by type_instance: "correctable", and
+for uncorrectable errors "non_fatal" or "fatal".
+Fatal errors are reported as I<NOTIF_FAILURE> and all others as I<NOTIF_WARNING>.
+
+B<Synopsis:>
+
+ <Plugin "pcie_errors">
+ Source "sysfs"
+ AccessDir "/sys/bus/pci"
+ ReportMasked false
+ PersistentNotifications false
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Source> B<sysfs>|B<proc>
+
+Use B<sysfs> or B<proc> to read data from /sysfs or /proc.
+The default value is B<sysfs>.
+
+=item B<AccessDir> I<dir>
+
+Directory used to access device config space. It is optional and defaults to
+/sys/bus/pci for B<sysfs> and to /proc/bus/pci for B<proc>.
+
+=item B<ReportMasked> B<false>|B<true>
+
+If true plugin will notify about errors that are set to masked in Error Mask register.
+Such errors are not reported to the PCI Express Root Complex. Defaults to B<false>.
+
+=item B<PersistentNotifications> B<false>|B<true>
+
+If false plugin will dispatch notification only on set/clear of error.
+The ones already reported will be ignored. Defaults to B<false>.
+
+=back
+
=head2 Plugin C<perl>
This plugin embeds a Perl-interpreter into collectd and provides an interface
Sets the source address to use. I<host> may either be a numerical network
address or a network hostname.
+=item B<AddressFamily> I<af>
+
+Sets the address family to use. I<af> may be "any", "ipv4" or "ipv6". This
+option will be ignored if you set a B<SourceAddress>.
+
=item B<Device> I<name>
Sets the outgoing network device to be used. I<name> has to specify an
</Writer>
<Database foo>
+ Plugin "kingdom"
Host "hostname"
Port "5432"
User "username"
<Database bar>
Interval 300
Service "service_name"
- Query backend # predefined
+ Query backends # predefined
Query rt36_tickets
</Database>
amount of time will be lost, for example, if a single statement within the
transaction fails or if the database server crashes.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<postgresql>.
+
=item B<Instance> I<name>
Specify the plugin instance name that should be used instead of the database
=head2 Plugin C<processes>
-=over 4
+Collects information about processes of local system.
-=item B<Process> I<Name>
+By default, with no process matches configured, only general statistics is
+collected: the number of processes in each state and fork rate.
-Select more detailed statistics of processes matching this name. The statistics
-collected for these selected processes are:
+Process matches can be configured by B<Process> and B<ProcessMatch> options.
+These may also be a block in which further options may be specified.
+
+The statistics collected for matched processes are:
- size of the resident segment size (RSS)
- user- and system-time used
- number of processes
- number of threads
- number of open files (under Linux)
+ - number of memory mapped files (under Linux)
- io data (where available)
- context switches (under Linux)
- - minor and major pagefaults.
+ - minor and major pagefaults
+ - Delay Accounting information (Linux only, requires libmnl)
+
+B<Synopsis:>
-Some platforms have a limit on the length of process names. I<Name> must stay
-below this limit.
+ <Plugin processes>
+ CollectFileDescriptor true
+ CollectContextSwitch true
+ CollectDelayAccounting false
+ Process "name"
+ ProcessMatch "name" "regex"
+ <Process "collectd">
+ CollectFileDescriptor false
+ CollectContextSwitch false
+ CollectDelayAccounting true
+ </Process>
+ <ProcessMatch "name" "regex">
+ CollectFileDescriptor false
+ CollectContextSwitch true
+ </ProcessMatch>
+ </Plugin>
+
+=over 4
+
+=item B<Process> I<Name>
+
+Select more detailed statistics of processes matching this name.
+
+Some platforms have a limit on the length of process names.
+I<Name> must stay below this limit.
=item B<ProcessMatch> I<name> I<regex>
-Similar to the B<Process> option this allows one to select more detailed
-statistics of processes matching the specified I<regex> (see L<regex(7)> for
-details). The statistics of all matching processes are summed up and
-dispatched to the daemon using the specified I<name> as an identifier. This
-allows one to "group" several processes together. I<name> must not contain
-slashes.
+Select more detailed statistics of processes matching the specified I<regex>
+(see L<regex(7)> for details). The statistics of all matching processes are
+summed up and dispatched to the daemon using the specified I<name> as an
+identifier. This allows one to "group" several processes together.
+I<name> must not contain slashes.
=item B<CollectContextSwitch> I<Boolean>
-Collect context switch of the process.
+Collect the number of context switches for matched processes.
+Disabled by default.
+
+=item B<CollectDelayAccounting> I<Boolean>
+
+If enabled, collect Linux Delay Accounding information for matching processes.
+Delay Accounting provides the time processes wait for the CPU to become
+available, for I/O operations to finish, for pages to be swapped in and for
+freed pages to be reclaimed. The metrics are reported as "seconds per second"
+using the C<delay_rate> type, e.g. C<delay_rate-delay-cpu>.
+Disabled by default.
+
+This option is only available on Linux, requires the C<libmnl> library and
+requires the C<CAP_NET_ADMIN> capability at runtime.
+
+=item B<CollectFileDescriptor> I<Boolean>
+
+Collect number of file descriptors of matched processes.
+Disabled by default.
+
+=item B<CollectMemoryMaps> I<Boolean>
+
+Collect the number of memory mapped files of the process.
+The limit for this number is configured via F</proc/sys/vm/max_map_count> in
+the Linux kernel.
=back
+The B<CollectContextSwitch>, B<CollectDelayAccounting>,
+B<CollectFileDescriptor> and B<CollectMemoryMaps> options may be used inside
+B<Process> and B<ProcessMatch> blocks. When used there, these options affect
+reporting the corresponding processes only. Outside of B<Process> and
+B<ProcessMatch> blocks these options set the default value for subsequent
+matches.
+
=head2 Plugin C<protocols>
Collects a lot of information about various network protocols, such as I<IP>,
=head2 Plugin C<redis>
-The I<Redis plugin> connects to one or more Redis servers and gathers
-information about each server's state. For each server there is a I<Node> block
-which configures the connection parameters for this node.
+The I<Redis plugin> connects to one or more Redis servers, gathers
+information about each server's state and executes user-defined queries.
+For each server there is a I<Node> block which configures the connection
+parameters and set of user-defined queries for this node.
<Plugin redis>
<Node "example">
Host "localhost"
Port "6379"
Timeout 2000
+ ReportCommandStats false
+ ReportCpuUsage true
<Query "LLEN myqueue">
+ #Database 0
Type "queue_length"
Instance "myqueue"
- <Query>
+ </Query>
</Node>
</Plugin>
-The information shown in the synopsis above is the I<default configuration>
-which is used by the plugin if no configuration is present.
-
=over 4
=item B<Node> I<Nodename>
The B<Node> block identifies a new Redis node, that is a new Redis instance
running in an specified host and port. The name for node is a canonical
identifier which is used as I<plugin instance>. It is limited to
-64E<nbsp>characters in length.
+128E<nbsp>characters in length.
+
+When no B<Node> is configured explicitly, plugin connects to "localhost:6379".
=item B<Host> I<Hostname>
=item B<Timeout> I<Milliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
-read function is blocking, you should keep this value as low as possible. Keep
-in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
-than B<Interval> defined globally.
+read function is blocking, you should keep this value as low as possible.
+It is expected what B<Timeout> values should be lower than B<Interval> defined
+globally.
+
+Defaults to 2000 (2 seconds).
+
+=item B<ReportCommandStats> B<false>|B<true>
+
+Enables or disables reporting of statistics based on the command type, including
+rate of command calls and average CPU time consumed by command processing.
+Defaults to B<false>.
+
+=item B<ReportCpuUsage> B<true>|B<false>
+
+Enables or disables reporting of CPU consumption statistics.
+Defaults to B<true>.
=item B<Query> I<Querystring>
The B<Query> block identifies a query to execute against the redis server.
-There may be an arbitrary number of queries to execute.
+There may be an arbitrary number of queries to execute. Each query should
+return single string or integer.
=item B<Type> I<Collectd type>
-Within a query definition, a valid collectd type to use as when submitting
+Within a query definition, a valid I<collectd type> to use as when submitting
the result of the query. When not supplied, will default to B<gauge>.
+Currently only types with one datasource are supported.
+See L<types.db(5)> for more details on types and their configuration.
+
=item B<Instance> I<Type instance>
Within a query definition, an optional type instance to use when submitting
the result of the query. When not supplied will default to the escaped
-command, up to 64 chars.
+command, up to 128 chars.
+
+=item B<Database> I<Index>
+
+This index selects the Redis logical database to use for query. Defaults
+to C<0>.
=back
IndexOID "IF-MIB::ifIndex"
SizeOID "IF-MIB::ifNumber"
<Data "ifDescr">
- Instance true
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
Plugin "interface"
OIDs "IF-MIB::ifDescr"
</Data>
OIDs "IF-MIB::ifInOctets" "IF-MIB::ifOutOctets"
</Data>
</Table>
+ <Table "CPUAffinityTable">
+ <Data "DomainName">
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
+ Plugin "virt"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhAffinityDomainName"
+ </Data>
+ <Data "VCPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_([0-9]{1,3})-cpu_[0-9]{1,3}$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhVCPUIndex"
+ </Data>
+ <Data "CPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_[0-9]{1,3}-cpu_([0-9]{1,3})$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUIndex"
+ </Data>
+ <Data "CPUAffinity">
+ Plugin "virt"
+ Type "cpu_affinity"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUAffinity"
+ </Data>
+ </Table>
</Plugin>
There are two types of blocks that can be contained in the
C<E<lt>PluginE<nbsp> snmp_agentE<gt>> block: B<Data> and B<Table>:
-=head3 The B<Data> block
+=head3 B<Data> block
The B<Data> block defines a list OIDs that are to be handled. This block can
define scalar or table OIDs. If B<Data> block is defined inside of B<Table>
=over 4
-=item B<Instance> I<true|false>
+=item B<IndexKey> block
+
+B<IndexKey> block contains all data needed for proper index build of snmp table.
+In case more than
+one table B<Data> block has B<IndexKey> block present then multiple key index is
+built. If B<Data> block defines scalar data type B<IndexKey> has no effect and can
+be omitted.
+
+=over 8
+
+=item B<Source> I<String>
-When B<Instance> is set to B<true>, the value for requested OID is copied from
-plugin instance field of corresponding collectd value. If B<Data> block defines
-scalar data type B<Instance> has no effect and can be omitted.
+B<Source> can be set to one of the following values: "Hostname", "Plugin",
+"PluginInstance", "Type", "TypeInstance". This value indicates which field of
+corresponding collectd metric is taken as a SNMP table index.
+
+=item B<Regex> I<String>
+
+B<Regex> option can also be used to parse strings or numbers out of
+specific field. For example: type-instance field which is "vcpu1-cpu2" can be
+parsed into two numeric fields CPU = 2 and VCPU = 1 and can be later used
+as a table index.
+
+=item B<Group> I<Number>
+
+B<Group> number can be specified in case groups are used in regex.
+
+=back
=item B<Plugin> I<String>
an interval. If set to B<False>, the default, these values aren't calculated /
dispatched.
+Please note what reported timer values less than 0.001 are ignored in all B<Timer*> reports.
+
=back
=head2 Plugin C<swap>
<Plugin "tail">
<File "/var/log/exim4/mainlog">
+ Plugin "mail"
Instance "exim"
Interval 60
<Match>
<DSType "Distribution">
Percentile 99
Bucket 0 100
+ #BucketType "bucket"
</DSType>
Type "latency"
Instance "foo"
logfile to parse. Within each B<File> block, there are one or more B<Match>
blocks, which configure a regular expression to search for.
-The B<Instance> option in the B<File> block may be used to set the plugin
-instance. So in the above example the plugin name C<tail-foo> would be used.
-This plugin instance is for all B<Match> blocks that B<follow> it, until the
-next B<Instance> option. This way you can extract several plugin instances from
-one logfile, handy when parsing syslog and the like.
+The B<Plugin> and B<Instance> options in the B<File> block may be used to set
+the plugin name and instance respectively. So in the above example the plugin name
+C<mail-exim> would be used.
+
+These options are applied for all B<Match> blocks that B<follow> it, until the
+next B<Plugin> or B<Instance> option. This way you can extract several plugin
+instances from one logfile, handy when parsing syslog and the like.
The B<Interval> option allows you to define the length of time between reads. If
this is not set, the default Interval will be used.
<DSType "Distribution">
Percentile 99
Bucket 0 100
+ BucketType "bucket"
</DSType>
=over 4
Bucket 20 50
Bucket 50 0
-Metrics are reported with the I<type> C<bucket> and the I<type instance>
+Metrics are reported with the I<type> set by B<BucketType> option (C<bucket>
+by default) and the I<type instance>
C<E<lt>TypeE<gt>[-E<lt>InstanceE<gt>]-E<lt>lower_boundE<gt>_E<lt>upper_boundE<gt>>.
This option may be repeated to calculate more than one rate.
+=item B<BucketType> I<Type>
+
+Sets the type used to dispatch B<Bucket> metrics.
+Optional, by default C<bucket> will be used.
+
=back
=back
Index 1
</Metric>
<File "/var/log/snort/snort.stats">
- Instance "snort-eth0"
+ Plugin "snortstats"
+ Instance "eth0"
Interval 600
Collect "snort-dropped"
</File>
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<tail_csv>.
+
=item B<Instance> I<PluginInstance>
Sets the I<plugin instance> used when dispatching the values.
Boolean enabling the use of logical core numbering for per core statistics.
When enabled, C<cpuE<lt>nE<gt>> is used as plugin instance, where I<n> is a
-sequential number assigned by the kernel. Otherwise, C<coreE<lt>nE<gt>> is used
-where I<n> is the n-th core of the socket, causing name conflicts when there is
-more than one socket.
+dynamic number assigned by the kernel. Otherwise, C<coreE<lt>nE<gt>> is used
+if there is only one package and C<pkgE<lt>nE<gt>-coreE<lt>mE<gt>> if there is
+more than one, where I<n> is the n-th core of package I<m>.
=back
CollectVCL false
CollectVSM false
CollectWorkers false
+ CollectLock false
+ CollectMempool false
+ CollectManagement false
+ CollectSMF false
+ CollectVBE false
+ CollectMSE false
</Instance>
</Plugin>
=item B<CollectSMA> B<true>|B<false>
malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
-component is Solaris specific. Only available with Varnish 2.x. False by
-default.
+component is Solaris specific. Note: SMA, SMF and MSE share counters, enable
+only the one used by the Varnish instance. Only available with Varnish 2.x.
+False by default.
=item B<CollectSMS> B<true>|B<false>
=item B<CollectSM> B<true>|B<false>
-file (memory mapped file) storage statistics. Only available with Varnish 2.x.
+file (memory mapped file) storage statistics. Only available with Varnish 2.x.,
+in varnish 4.x. use CollectSMF.
False by default.
=item B<CollectStruct> B<true>|B<false>
Collect statistics about worker threads. False by default.
+=item B<CollectVBE> B<true>|B<false>
+
+Backend counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectSMF> B<true>|B<false>
+
+file (memory mapped file) storage statistics. Only available with Varnish 4.x.
+Note: SMA, SMF and MSE share counters, enable only the one used by the Varnish
+instance. Used to be called SM in Varnish 2.x. False by default.
+
+=item B<CollectManagement> B<true>|B<false>
+
+Management process counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectLock> B<true>|B<false>
+
+Lock counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectMempool> B<true>|B<false>
+
+Memory pool counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectMSE> B<true>|B<false>
+
+Varnish Massive Storage Engine 2.0 (MSE2) is an improved storage backend for
+Varnish, replacing the traditional malloc and file storages. Only available
+with Varnish-Plus 4.x. Note: SMA, SMF and MSE share counters, enable only the
+one used by the Varnish instance. False by default.
+
=back
=head2 Plugin C<virt>
=back
+=item B<PersistentNotification> B<true>|B<false>
+Override default configuration to only send notifications when there is a change
+in the lifecycle state of a domain. When set to true notifications will be sent
+for every read cycle. Default is false. Does not affect the stats being
+dispatched.
+
=back
=head2 Plugin C<vmem>
Protocol "tcp"
LogSendErrors true
Prefix "collectd"
+ UseTags false
</Node>
</Plugin>
=item B<Prefix> I<String>
-When set, I<String> is added in front of the host name. Dots and whitespace are
-I<not> escaped in this string (see B<EscapeCharacter> below).
+When B<UseTags> is I<false>, B<Prefix> value is added in front of the host name.
+When B<UseTags> is I<true>, B<Prefix> value is added in front of series name.
+
+Dots and whitespace are I<not> escaped in this string (see B<EscapeCharacter>
+below).
=item B<Postfix> I<String>
-When set, I<String> is appended to the host name. Dots and whitespace are
-I<not> escaped in this string (see B<EscapeCharacter> below).
+When B<UseTags> is I<false>, B<Postfix> value appended to the host name.
+When B<UseTags> is I<true>, B<Postgix> value appended to the end of series name
+(before the first ; that separates the name from the tags).
+
+Dots and whitespace are I<not> escaped in this string (see B<EscapeCharacter>
+below).
=item B<EscapeCharacter> I<Char>
default), the plugin and plugin instance (and likewise the type and type
instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+Option value is not used when B<UseTags> is I<true>.
+
=item B<AlwaysAppendDS> B<false>|B<true>
If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
I<EscapeCharacter>. Otherwise, if set to B<true>, the C<.> (dot) character
is preserved, i.e. passed through.
+Option value is not used when B<UseTags> is I<true>.
+
=item B<DropDuplicateFields> B<false>|B<true>
If set to B<true>, detect and remove duplicate components in Graphite metric
names. For example, the metric name C<host.load.load.shortterm> will
be shortened to C<host.load.shortterm>.
+=item B<UseTags> B<false>|B<true>
+
+If set to B<true>, Graphite metric names will be generated as tagged series.
+This allows for much more flexibility than the traditional hierarchical layout.
+
+Example:
+C<test.single;host=example.com;plugin=test;plugin_instance=foo;type=single;type_instance=bar>
+
+You can use B<Postfix> option to add more tags by specifying it like
+C<;tag1=value1;tag2=value2>. Note what tagging support was added since Graphite
+version 1.1.x.
+
+If set to B<true>, the B<SeparateInstances> and B<PreserveSeparator> settings
+are not used.
+
+Default value: B<false>.
+
=back
=head2 Plugin C<write_log>
Please refer to L<http://kairosdb.github.io/docs/build/html/restapi/AddDataPoints.html?highlight=ttl>
+=item B<Prefix> I<String>
+
+Only available for the KAIROSDB output format.
+
+Sets the metrics prefix I<string>. Defaults to I<collectd>.
+
=item B<Metrics> B<true>|B<false>
Controls whether I<metrics> are POSTed to this location. Defaults to B<true>.
=item B<GraphitePrefix> (B<Format>=I<Graphite> only)
A prefix can be added in the metric name when outputting in the I<Graphite>
-format. It's added before the I<Host> name.
+format.
+
+When B<GraphiteUseTags> is I<false>, prefix is added before the I<Host> name.
Metric name will be
C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+When B<GraphiteUseTags> is I<true>, prefix is added in front of series name.
+
=item B<GraphitePostfix> (B<Format>=I<Graphite> only)
A postfix can be added in the metric name when outputting in the I<Graphite>
-format. It's added after the I<Host> name.
+format.
+
+When B<GraphiteUseTags> is I<false>, postfix is added after the I<Host> name.
Metric name will be
C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+When B<GraphiteUseTags> is I<true>, prefix value appended to the end of series
+name (before the first ; that separates the name from the tags).
+
=item B<GraphiteEscapeChar> (B<Format>=I<Graphite> only)
Specify a character to replace dots (.) in the host part of the metric name.
default), the plugin and plugin instance (and likewise the type and type
instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+Option value is not used when B<GraphiteUseTags> is I<true>.
+
=item B<GraphiteAlwaysAppendDS> B<true>|B<false>
If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
is preserved, i.e. passed through.
+Option value is not used when B<GraphiteUseTags> is I<true>.
+
+=item B<GraphiteUseTags> B<false>|B<true>
+
+If set to B<true> Graphite metric names will be generated as tagged series.
+
+Default value: B<false>.
+
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to
Prefix "collectd/"
Database 1
MaxSetSize -1
+ MaxSetDuration -1
StoreRates true
</Node>
</Plugin>
The B<MaxSetSize> option limits the number of items that the I<Sorted Sets> can
hold. Negative values for I<Items> sets no limit, which is the default behavior.
+=item B<MaxSetDuration> I<Seconds>
+
+The B<MaxSetDuration> option limits the duration of items that the
+I<Sorted Sets> can hold. Negative values for I<Items> sets no duration, which
+is the default behavior.
+
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to
projects / collectd.git / blobdiff