Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
will be mostly useless.
+Starting with collectd 4.9, this may also be a block in which further options
+affecting the behavior of B<LoadPlugin> may be specified. The following
+options are allowed inside a B<LoadPlugin> block:
+
+ <LoadPlugin perl>
+ Globals true
+ </LoadPlugin>
+
+=over 4
+
+=item B<Globals> B<true|false>
+
+If enabled, collectd will export all global symbols of the plugin (and of all
+libraries loaded as dependencies of the plugin) and, thus, makes those symbols
+available for resolving unresolved symbols in subsequently loaded plugins if
+that is supported by your system. By default, this is disabled.
+
+This is useful (or possibly even required), e.E<nbsp>g., when loading a plugin
+that embeds some scripting language into the daemon (e.E<nbsp>g. the C<perl>
+or C<python> plugins). Scripting languages usually provide means to load
+extensions written in C. Those extensions require symbols provided by the
+interpreter, which is loaded as a dependency of the respective collectd
+plugin. See the documentation of those plugins (e.E<nbsp>g.,
+L<collectd-perl(5)> or L<collectd-python(5)>) for details.
+
+=back
+
=item B<Include> I<Path>
If I<Path> points to a file, includes that file. If I<Path> points to a
values lead to a higher system load produced by collectd, while higher values
lead to more coarse statistics.
+B<Warning:> You should set this once and then never touch it again. If you do,
+I<you will have to delete all your RRD files> or know some serious RRDtool
+magic! (Assuming you're using the I<RRDtool> or I<RRDCacheD> plugin.)
+
=item B<ReadThreads> I<Num>
Number of threads to start for reading plugins. The default value is B<5>, but
=item B<Hostname> I<Name>
Sets the hostname that identifies a host. If you omit this setting, the
-hostname will be determinded using the L<gethostname(2)> system call.
+hostname will be determined using the L<gethostname(2)> system call.
=item B<FQDNLookup> B<true|false>
and the match infrastructure (the same code used by the tail plugin) to use
regular expressions with the received data.
-The following example will read the current value of AMD stock from google's
+The following example will read the current value of AMD stock from Google's
finance page and dispatch the value to collectd.
<Plugin curl>
=item B<MeasureResponseTime> B<true>|B<false>
-Measure response time for the request. Disabled by default.
+Measure response time for the request. If this setting is enabled, B<Match>
+blocks (see below) are optional. Disabled by default.
=item B<E<lt>MatchE<gt>>
One or more B<Match> blocks that define how to match information in the data
returned by C<libcurl>. The C<curl> plugin uses the same infrastructure that's
used by the C<tail> plugin, so please see the documentation of the C<tail>
-plugin below on how matches are defined.
+plugin below on how matches are defined. If the B<MeasureResponseTime> option
+is set to B<true>, B<Match> blocks are optional.
=back
In the B<Plugin> block, there may be one or more B<URL> blocks, each defining
a URL to be fetched via HTTP (using libcurl) and one or more B<Key> blocks.
-The B<Key> string argument must be in a path format, of which is used to collect
-a value from a JSON map object. If a B<Key> path element is that of a I<*> wildcard,
-the values for all keys will be collectd.
+The B<Key> string argument must be in a path format, which is used to collect a
+value from a JSON map object. If a path element of B<Key> is the
+I<*>E<nbsp>wildcard, the values for all keys will be collectd.
The following options are valid within B<URL> blocks:
Query blocks define I<SQL> statements and how the returned data should be
interpreted. They are identified by the name that is given in the opening line
of the block. Thus the name needs to be unique. Other than that, the name is
-not used in collectd.
+not used in collectd.
In each B<Query> block, there is one or more B<Result> blocks. B<Result> blocks
define which column holds which value or instance information. You can use
different syntax. The plugin will use only those queries, where the specified
minimum and maximum versions fit the version of the database in use.
-The database version is determined by C<dbi_conn_get_engine_version>, see the
+The database version is determined by C<dbi_conn_get_engine_version>, see the
L<libdbi documentation|http://libdbi.sourceforge.net/docs/programmers-guide/reference-conn.html#DBI-CONN-GET-ENGINE-VERSION>
for details. Basically, each part of the version is assumed to be in the range
from B<00> to B<99> and all dots are removed. So version "4.1.2" becomes
=item B<Interface> I<Interface>
-The dns plugin uses B<libpcap> to capture dns traffic and analyses it. This
+The dns plugin uses B<libpcap> to capture dns traffic and analyzes it. This
option sets the interface that should be used. If this option is not set, or
set to "any", the plugin will try to get packets from B<all> interfaces. This
may not work on certain platforms, such as MacE<nbsp>OSE<nbsp>X.
=head2 Plugin C<netapp>
-The netapp plugin can collect various performance and capacity informations
+The netapp plugin can collect various performance and capacity information
from a NetApp filer using the NetApp API.
+Please note that NetApp has a wide line of products and a lot of different
+software versions for each of these products. This plugin was developed for a
+NetApp FAS3040 running OnTap 7.2.3P8 and tested on FAS2050 7.3.1.1L1,
+FAS3140 7.2.5.1 and FAS3020 7.2.4P9. It I<should> work for most combinations of
+model and software version but it is very hard to test this.
+If you have used this plugin with other models and/or software version, feel
+free to send us a mail to tell us about the results, even if it's just a short
+"It works".
+
To collect these data collectd will log in to the NetApp via HTTP(S) and HTTP
basic authentication.
=item B<IgnoreSelected>
-The behaviour is the same as with all other similar plugins: If nothing is
+The behavior is the same as with all other similar plugins: If nothing is
selected at all, everything is collected. If some things are selected using the
options described above, only these statistics are collected. If you set
B<IgnoreSelected> to B<true>, this behavior is inverted, i.E<nbsp>e. the
The Network plugin sends data to a remote instance of collectd, receives data
from a remote instance, or both at the same time. Data which has been received
-from the network is usually not transmitted again, but this can be actived, see
+from the network is usually not transmitted again, but this can be activated, see
the B<Forward> option below.
The default IPv6 multicast group is C<ff18::efc0:4a42>. The default IPv4
=item B<ReverseLookups> B<true>|B<false>
-Sets wether or not to perform reverse lookups on peers. Since the name or
+Sets whether or not to perform reverse lookups on peers. Since the name or
IP-address may be used in a filename it is recommended to disable reverse
lookups. The default is to do reverse lookups to preserve backwards
compatibility, though.
Specifies the location of the status file.
+=item B<ImprovedNamingSchema> B<true>|B<false>
+
+When enabled, the filename of the status file will be used as plugin instance
+and the client's "common name" will be used as type instance. This is required
+when reading multiple status files. Enabling this option is recommended, but to
+maintain backwards compatibility this option is disabled by default.
+
=item B<Compression> B<true>|B<false>
Sets whether or not statistics about the compression used by OpenVPN should be
Sets the Time-To-Live of generated ICMP packets.
+=item B<SourceAddress> I<host>
+
+Sets the source address to use. I<host> may either be a numerical network
+address or a network hostname.
+
+=item B<Device> I<name>
+
+Sets the outgoing network device to be used. I<name> has to specify an
+interface name (e.E<nbsp>g. C<eth0>). This might not be supported by all
+operating systems.
+
+=item B<MaxMissed> I<Packets>
+
+Trigger a DNS resolv after the host has not replied to I<Packets> packets. This
+enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
+
+Default: B<-1> (disabled)
+
=back
=head2 Plugin C<postgresql>
=back
+=head2 Plugin C<python>
+
+This plugin embeds a Python-interpreter into collectd and provides an interface
+to collectd's plugin system. See L<collectd-python(5)> for its documentation.
+
+=head2 Plugin C<routeros>
+
+The C<routeros> plugin connects to a device running I<RouterOS>, the
+Linux-based operating system for routers by I<MikroTik>. The plugin uses
+I<librouteros> to connect and reads information about the interfaces and
+wireless connections of the device. The configuration supports querying
+multiple routers:
+
+ <Plugin "routeros">
+ <Router>
+ Host "router0.example.com"
+ User "collectd"
+ Password "secr3t"
+ CollectInterface true
+ </Router>
+ <Router>
+ Host "router1.example.com"
+ User "collectd"
+ Password "5ecret"
+ CollectInterface true
+ CollectRegistrationTable true
+ </Router>
+ </Plugin>
+
+As you can see above, the configuration of the I<routeros> plugin consists of
+one or more B<E<lt>RouterE<gt>> blocks. Within each block, the following
+options are understood:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the router to connect to.
+
+=item B<Port> I<Port>
+
+Port name or port number used when connecting. If left unspecified, the default
+will be chosen by I<librouteros>, currently "8728". This option expects a
+string argument, even when a numeric port number is given.
+
+=item B<User> I<User>
+
+Use the user name I<User> to authenticate. Defaults to "admin".
+
+=item B<Password> I<Password>
+
+Set the password used to authenticate.
+
+=item B<CollectInterface> B<true>|B<false>
+
+When set to B<true>, interface statistics will be collected for all interfaces
+present on the device. Defaults to B<false>.
+
+=item B<CollectRegistrationTable> B<true>|B<false>
+
+When set to B<true>, information about wireless LAN connections will be
+collected. Defaults to B<false>.
+
+=back
+
=head2 Plugin C<rrdcached>
The C<rrdcached> plugin uses the RRDtool accelerator daemon, L<rrdcached(1)>,
=item B<CounterSet>
-The matched number is a counter. Simply sets the internal counter to this
-value.
+=item B<DeriveSet>
+
+=item B<AbsoluteSet>
+
+The matched number is a counter. Simply I<sets> the internal counter to this
+value. Variants exist for C<COUNTER>, C<DERIVE>, and C<ABSOLUTE> data sources.
=item B<CounterAdd>
-Add the matched value to the internal counter.
+=item B<DeriveAdd>
+
+Add the matched value to the internal counter. In case of B<DeriveAdd>, the
+matched number may be negative, which will effectively subtract from the
+internal counter.
=item B<CounterInc>
-Increase the internal counter by one. This B<DSType> is the only one that does
-not use the matched subexpression, but simply counts the number of matched
+=item B<DeriveInc>
+
+Increase the internal counter by one. These B<DSType> are the only ones that do
+not use the matched subexpression, but simply count the number of matched
lines. Thus, you may use a regular expression without submatch in this case.
=back
As you'd expect the B<Gauge*> types interpret the submatch as a floating point
-number, using L<strtod(3)>. The B<CounterSet> and B<CounterAdd> interpret the
-submatch as an integer using L<strtoll(3)>. B<CounterInc> does not use the
-submatch at all and it may be omitted in this case.
+number, using L<strtod(3)>. The B<Counter*> and B<AbsoluteSet> types interpret
+the submatch as an unsigned integer using L<strtoull(3)>. The B<Derive*> types
+interpret the submatch as a signed integer using L<strtoll(3)>. B<CounterInc>
+and B<DeriveInc> do not use the submatch at all and it may be omitted in this
+case.
=item B<Type> I<Type>
=head2 Plugin C<tokyotyrant>
-The C<tokyotyrant plugin> connects to a TokyoTyrant server and collects a
+The C<tokyotyrant plugin> connects to a TokyoTyrant server and collects a
couple metrics: number of records, and database size on disk.
=over 4
=back
-=head2 Built-in targets
+=head2 Built-in targets
The following targets are built into the core daemon and therefore need no
plugins to be loaded:
projects / collectd.git / blobdiff