=head2 Plugin C<cpusleep>
This plugin doesn't have any options. It reads CLOCK_BOOTTIME and
-CLOCK_MONOTONIC and reports the differences between these
-clocks. Since BOOTTIME clock increments while device is suspended and
-MONOTONIC clock does not, the derivative of the difference between
-these clocks gives the relative amount of time the device has spent in
-suspend state. The recorded value is in milliseconds / seconds.
+CLOCK_MONOTONIC and reports the difference between these clocks. Since
+BOOTTIME clock increments while device is suspended and MONOTONIC
+clock does not, the derivative of the difference between these clocks
+gives the relative amount of time the device has spent in suspend
+state. The recorded value is in milliseconds of sleep per seconds of
+wall clock.
=head2 Plugin C<csv>
=item B<MappedOnly> B<true>|B<false>
-When set to B<true>, only metrics that can be mapped to to a I<type> will be
+When set to B<true>, only metrics that can be mapped to a I<type> will be
collected, all other metrics will be ignored. Defaults to B<false>.
=back
=back
+=head2 Plugin C<gps>
+
+The C<gps plugin> connects to gpsd on the host machine.
+The host, port, timeout and pause are configurable.
+
+This is useful if you run an NTP server using a GPS for source and you want to
+monitor it.
+
+Mind your GPS must send $--GSA for having the data reported!
+
+The following elements are collected:
+
+=over 4
+
+=item B<satellites>
+
+Number of satellites used for fix (type instance "used") and in view (type
+instance "visible"). 0 means no GPS satellites are visible.
+
+=item B<dilution_of_precision>
+
+Vertical and horizontal dilution (type instance "horizontal" or "vertical").
+It should be between 0 and 3.
+Look at the documentation of your GPS to know more.
+
+=back
+
+Synopsis:
+
+ LoadPlugin gps
+ <Plugin "gps">
+ # Connect to localhost on gpsd regular port:
+ Host "127.0.0.1"
+ Port "2947"
+ # 15 ms timeout
+ Timeout 0.015
+ # PauseConnect of 5 sec. between connection attempts.
+ PauseConnect 5
+ </Plugin>
+
+Available configuration options:
+
+=over 4
+
+=item B<Host> I<Host>
+
+The host on which gpsd daemon runs. Defaults to B<localhost>.
+
+=item B<Port> I<Port>
+
+Port to connect to gpsd on the host machine. Defaults to B<2947>.
+
+=item B<Timeout> I<Seconds>
+
+Timeout in seconds (default 0.015 sec).
+
+The GPS data stream is fetch by the plugin form the daemon.
+It waits for data to be available, if none arrives it times out
+and loop for another reading.
+Mind to put a low value gpsd expects value in the micro-seconds area
+(recommended is 500 us) since the waiting function is blocking.
+Value must be between 500 us and 5 sec., if outside that range the
+default value is applied.
+
+This only applies from gpsd release-2.95.
+
+=item B<PauseConnect> I<Seconds>
+
+Pause to apply between attempts of connection to gpsd in seconds (default 5 sec).
+
+=back
+
=head2 Plugin C<grpc>
The I<grpc> plugin provides an RPC interface to submit values to or query
=back
-=item B<WorkerThreads> I<Num>
-
-Number of threads to start for handling incoming connections. The default
-value is B<5>.
-
=back
=head2 Plugin C<hddtemp>
with I<veth> and all interfaces with names starting with I<tun> followed by
at least one digit.
+=item B<ReportInactive> I<true>|I<false>
+
+When set to I<false>, only interfaces with non-zero traffic will be
+reported. Note that the check is done by looking into whether a
+package was sent at any time from boot and the corresponding counter
+is non-zero. So, if the interface has been sending data in the past
+since boot, but not during the reported time-interval, it will still
+be reported.
+
+The default value is I<true> and results in collection of the data
+from all interfaces that are selected by B<Interface> and
+B<IgnoreSelected> options.
=item B<UniqueName> I<true>|I<false>
Port "3306"
MasterStats true
ConnectTimeout 10
+ SSLKey "/path/to/key.pem"
+ SSLCert "/path/to/cert.pem"
+ SSLCA "/path/to/ca.pem"
+ SSLCAPath "/path/to/cas/"
+ SSLCipher "DHE-RSA-AES256-SHA"
</Database>
<Database bar>
SlaveStats true
SlaveNotifications true
</Database>
+
+ <Database galera>
+ Alias "galera"
+ Host "localhost"
+ Socket "/var/run/mysql/mysqld.sock"
+ WsrepStats true
+ </Database>
</Plugin>
A B<Database> block defines one connection to a MySQL database. It accepts a
single argument which specifies the name of the database. None of the other
options are required. MySQL will use default values as documented in the
-section "mysql_real_connect()" in the B<MySQL reference manual>.
+"mysql_real_connect()" and "mysql_ssl_set()" sections in the
+B<MySQL reference manual>.
=over 4
If enabled, the plugin sends a notification if the replication slave I/O and /
or SQL threads are not running. Defaults to B<false>.
+=item B<WsrepStats> I<true|false>
+
+ Enable the collection of wsrep plugin statistics, used in Master-Master
+ replication setups like in MySQL Galera/Percona XtraDB Cluster.
+ User needs only privileges to execute 'SHOW GLOBAL STATUS'
+
=item B<ConnectTimeout> I<Seconds>
Sets the connect timeout for the MySQL client.
+=item B<SSLKey> I<Path>
+
+If provided, the X509 key in PEM format.
+
+=item B<SSLCert> I<Path>
+
+If provided, the X509 cert in PEM format.
+
+=item B<SSLCA> I<Path>
+
+If provided, the CA file in PEM format (check OpenSSL docs).
+
+=item B<SSLCAPath> I<Path>
+
+If provided, the CA directory (check OpenSSL docs).
+
+=item B<SSLCipher> I<String>
+
+If provided, the SSL cipher to use.
+
=back
=head2 Plugin C<netapp>
=item B<AllPortsSummary> I<true>|I<false>
If this option is set to I<true> a summary of statistics from all connections
-are collectd. This option defaults to I<false>.
+are collected. This option defaults to I<false>.
=back
attempt to figure out the remote SSL protocol version. See
L<curl_easy_setopt(3)> for more details.
-=item B<Format> B<Command>|B<JSON>
+=item B<Format> B<Command>|B<JSON>|B<KAIROSDB>
Format of the output to generate. If set to B<Command>, will create output that
is understood by the I<Exec> and I<UnixSock> plugins. When set to B<JSON>, will
-create output in the I<JavaScript Object Notation> (JSON).
+create output in the I<JavaScript Object Notation> (JSON). When set to KAIROSDB
+, will create output in the KairosDB format.
Defaults to B<Command>.
+=item B<Metrics> B<true>|B<false>
+
+Controls whether I<metrics> are POSTed to this location. Defaults to B<true>.
+
+=item B<Notifications> B<false>|B<true>
+
+Controls whether I<notifications> are POSTed to this location. Defaults to B<false>.
+
=item B<StoreRates> B<true|false>
If set to B<true>, convert counter values to rates. If set to B<false> (the
projects / collectd.git / blobdiff