global B<Interval> setting. If a plugin provides own support for specifying an
interval, that setting will take precedence.
+=item B<FlushInterval> I<Seconds>
+
+Specifies the the interval, in seconds, to call the flush callback if it's
+defined in this plugin. By default, this is disabled
+
+=item B<FlushTimeout> I<Seconds>
+
+Specifies the value of the timeout argument of the flush callback.
+
=back
=item B<AutoLoadPlugin> B<false>|B<true>
When set to B<true>, various statistics about the I<collectd> daemon will be
collected, with "collectd" as the I<plugin name>. Defaults to B<false>.
-The "write_queue" I<plugin instance> reports the number of elements currently
-queued and the number of elements dropped off the queue by the
-B<WriteQueueLimitLow>/B<WriteQueueLimitHigh> mechanism.
+The following metrics are reported:
+
+=over 4
+
+=item C<collectd-write_queue/queue_length>
+
+The number of metrics currently in the write queue. You can limit the queue
+length with the B<WriteQueueLimitLow> and B<WriteQueueLimitHigh> options.
+
+=item C<collectd-write_queue/derive-dropped>
-The "cache" I<plugin instance> reports the number of elements in the value list
-cache (the cache you can interact with using L<collectd-unixsock(5)>).
+The number of metrics dropped due to a queue length limitation.
+If this value is non-zero, your system can't handle all incoming metrics and
+protects itself against overload by dropping metrics.
+
+=item C<collectd-cache/cache_size>
+
+The number of elements in the metric cache (the cache you can interact with
+using L<collectd-unixsock(5)>).
+
+=back
=item B<Include> I<Path> [I<pattern>]
The I<AMQP plugin> can be used to communicate with other instances of
I<collectd> or third party applications using an AMQP message broker. Values
are sent to or received from the broker, which handles routing, queueing and
-possibly filtering or messages.
+possibly filtering out messages.
+
+B<Synopsis:>
<Plugin "amqp">
# Send values to an AMQP broker
TCP-Port to connect to. Defaults to B<3551>.
-=item B<ReportSeconds> B<true|false>
+=item B<ReportSeconds> B<true>|B<false>
If set to B<true>, the time reported in the C<timeleft> metric will be
converted to seconds. This is the recommended setting. If set to B<false>, the
default for backwards compatibility, the time will be reported in minutes.
+=item B<PersistentConnection> B<true>|B<false>
+
+By default, the plugin will try to keep the connection to UPS open between
+reads. Since this appears to be somewhat brittle (I<apcupsd> appears to close
+the connection due to inactivity quite quickly), the plugin will try to detect
+this problem and switch to an open-read-close mode in such cases.
+
+You can instruct the plugin to close the connection after each read by setting
+this option to B<false>.
+
=back
=head2 Plugin C<aquaero>
</Query>
<Database "product_information">
Driver "mysql"
+ Interval 120
DriverOption "host" "localhost"
DriverOption "username" "collectd"
DriverOption "password" "aZo6daiw"
=over 4
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+database. By default the global B<Interval> setting will be used.
+
=item B<Driver> I<Driver>
Specifies the driver to use to connect to the database. In many cases those
B<Interface> is inverted: All selected interfaces are ignored and all
other interfaces are collected.
+=item B<UniqueName> I<true>|I<false>
+
+Interface name is not unique on Solaris (KSTAT), interface name is unique
+only within a module/instance. Following tuple is considered unique:
+ (ks_module, ks_instance, ks_name)
+If this option is set to true, interface name contains above three fields
+separated by an underscore. For more info on KSTAT, visit
+L<http://docs.oracle.com/cd/E23824_01/html/821-1468/kstat-3kstat.html#REFMAN3Ekstat-3kstat>
+
+This option is only available on Solaris.
+
=back
=head2 Plugin C<ipmi>
=item B<Chain> I<Table> I<Chain> [I<Comment|Number> [I<Name>]]
-Select the rules to count. If only I<Table> and I<Chain> are given, this plugin
-will collect the counters of all rules which have a comment-match. The comment
-is then used as type-instance.
+=item B<Chain6> I<Table> I<Chain> [I<Comment|Number> [I<Name>]]
+
+Select the iptables/ip6tables filter rules to count packets and bytes from.
+
+If only I<Table> and I<Chain> are given, this plugin will collect the counters
+of all rules which have a comment-match. The comment is then used as
+type-instance.
If I<Comment> or I<Number> is given, only the rule with the matching comment or
the I<n>th rule will be collected. Again, the comment (or the number) will be
=back
+=head2 Plugin C<mqtt>
+
+The I<MQTT plugin> can send metrics to MQTT (B<Publish> blocks) and receive
+values from MQTT (B<Subscribe> blocks).
+
+B<Synopsis:>
+
+ <Plugin mqtt>
+ <Publish "name">
+ Host "mqtt.example.com"
+ Prefix "collectd"
+ </Publish>
+ <Subscribe "name">
+ Host "mqtt.example.com"
+ Topic "collectd/#"
+ </Subscribe>
+ </Plugin>
+
+The plugin's configuration is in B<Publish> and/or B<Subscribe> blocks,
+configuring the sending and receiving direction respectively. The plugin will
+register a write callback named C<mqtt/I<name>> where I<name> is the string
+argument given to the B<Publish> block. Both types of blocks share many but not
+all of the following options. If an option is valid in only one of the blocks,
+it will be mentioned explicitly.
+
+B<Options:>
+
+=over 4
+
+=item B<Host> I<Hostname>
+
+Hostname of the MQTT broker to connect to.
+
+=item B<Port> I<Service>
+
+Port number or service name of the MQTT broker to connect to.
+
+=item B<User> I<UserName>
+
+Username used when authenticating to the MQTT broker.
+
+=item B<Password> I<Password>
+
+Password used when authenticating to the MQTT broker.
+
+=item B<ClientId> I<ClientId>
+
+MQTT client ID to use. Defaults to the hostname used by I<collectd>.
+
+=item B<QoS> [B<0>-B<2>]
+
+Sets the I<Quality of Service>, with the values C<0>, C<1> and C<2> meaning:
+
+=over 4
+
+=item B<0>
+
+At most once
+
+=item B<1>
+
+At least once
+
+=item B<2>
+
+Exactly once
+
+=back
+
+In B<Publish> blocks, this option determines the QoS flag set on outgoing
+messages and defaults to B<0>. In B<Subscribe> blocks, determines the maximum
+QoS setting the client is going to accept and defaults to B<2>. If the QoS flag
+on a message is larger than the maximum accepted QoS of a subscriber, the
+message's QoS will be downgraded.
+
+=item B<Prefix> I<Prefix> (Publish only)
+
+This plugin will use one topic per I<value list> which will looks like a path.
+I<Prefix> is used as the first path element and defaults to B<collectd>.
+
+An example topic name would be:
+
+ collectd/cpu-0/cpu-user
+
+=item B<Retain> B<false>|B<true> (Publish only)
+
+Controls whether the MQTT broker will retain (keep a copy of) the last message
+sent to each topic and deliver it to new subscribers. Defaults to B<false>.
+
+=item B<StoreRates> B<true>|B<false> (Publish only)
+
+Controls whether C<DERIVE> and C<COUNTER> metrics are converted to a I<rate>
+before sending. Defaults to B<true>.
+
+=item B<CleanSession> B<true>|B<false> (Subscribe only)
+
+Controls whether the MQTT "cleans" the session up after the subscriber
+disconnects or if it maintains the subscriber's subscriptions and all messages
+that arrive while the subscriber is disconnected. Defaults to B<true>.
+
+=item B<Topic> I<TopicName> (Subscribe only)
+
+Configures the topic(s) to subscribe to. You can use the single level C<+> and
+multi level C<#> wildcards. Defaults to B<collectd/#>, i.e. all topics beneath
+the B<collectd> branch.
+
+=item B<CACert> I<file>
+
+Path to the PEM-encoded CA certificate file. Setting this option enables TLS
+communication with the MQTT broker, and as such, B<Port> should be the TLS-enabled
+port of the MQTT broker.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<CertificateFile> I<file>
+
+Path to the PEM-encoded certificate file to use as client certificate when
+connecting to the MQTT broker.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<CertificateKeyFile> I<file>
+
+Path to the unencrypted PEM-encoded key file corresponding to B<CertificateFile>.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<TLSProtocol> I<protocol>
+
+If configured, this specifies the string protocol version (e.g. C<tlsv1>,
+C<tlsv1.2>) to use for the TLS connection to the broker. If not set a default
+version is used which depends on the version of OpenSSL the Mosquitto library
+was linked against.
+
+=item B<CipherSuite> I<ciphersuite>
+
+A string describing the ciphers available for use. See L<ciphers(1)> and the
+C<openssl ciphers> utility for more information. If unset, the default ciphers
+will be used.
+
+
+=back
+
=head2 Plugin C<mysql>
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
=back
+=head2 Plugin C<notify_nagios>
+
+The I<notify_nagios> plugin writes notifications to Nagios' I<command file> as
+a I<passive service check result>.
+
+Available configuration options:
+
+=over 4
+
+=item B<CommandFile> I<Path>
+
+Sets the I<command file> to write to. Defaults to F</usr/local/nagios/var/rw/nagios.cmd>.
+
+=back
+
=head2 Plugin C<ntpd>
=over 4
Sets the URL to use to connect to the I<OpenLDAP> server. This option is
I<mandatory>.
+=item B<BindDN> I<BindDN>
+
+Name in the form of an LDAP distinguished name intended to be used for
+authentication. Defaults to empty string to establish an anonymous authorization.
+
+=item B<Password> I<Password>
+
+Password for simple bind authentication. If this option is not set,
+unauthenticated bind operation is used.
+
=item B<StartTLS> B<true|false>
Defines whether TLS must be used when connecting to the I<OpenLDAP> server.
Sets the Time-To-Live of generated ICMP packets.
+=item B<Size> I<size>
+
+Sets the size of the data payload in ICMP packet to specified I<size> (it
+will be filled with regular ASCII pattern). If not set, default 56 byte
+long string is used so that the packet size of an ICMPv4 packet is exactly
+64 bytes, similar to the behaviour of normal ping(1) command.
+
=item B<SourceAddress> I<host>
Sets the source address to use. I<host> may either be a numerical network
allows to "group" several processes together. I<name> must not contain
slashes.
+=item B<CollectContextSwitch> I<Boolean>
+
+Collect context switch of the process.
+
=back
=head2 Plugin C<protocols>
are unchanged. If set to B<True>, the such metrics are not dispatched and
removed from the internal cache.
+=item B<CounterSum> B<false>|B<true>
+
+When enabled, create a C<count> metric which reports the change since the last
+read. This option primarily exists for compatibility with the I<statsd>
+impelemtation by Etsy.
+
=item B<TimerPercentile> I<Percent>
Calculate and dispatch the configured percentile, i.e. compute the latency, so
B<address> means use the interface's mac address. This is useful since the
interface path might change between reboots of a guest or across migrations.
-=item B<PluginInstanceFormat> B<name|uuid>
+=item B<PluginInstanceFormat> B<name|uuid|none>
When the virt plugin logs data, it sets the plugin_instance of the collected
-data according to this setting. The default is to use the guest name as provided
-by the hypervisor, which is equal to setting B<name>.
+data according to this setting. The default is to not set the plugin_instance.
+B<name> means use the guest's name as provided by the hypervisor.
B<uuid> means use the guest's UUID.
-You can also specify combinations of these fields. For example B<name uuid>
-means to concatenate the guest name and UUID (with a literal colon character
-between, thus I<"foo:1234-1234-1234-1234">).
+You can also specify combinations of the B<name> and B<uuid> fields.
+For example B<name uuid> means to concatenate the guest name and UUID
+(with a literal colon character between, thus I<"foo:1234-1234-1234-1234">).
=back
Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+=item B<ReconnectInterval> I<Seconds>
+
+When set to non-zero, forces the connection to the Graphite backend to be
+closed and re-opend periodically. This behavior is desirable in environments
+where the connection to the Graphite backend is done through load balancers,
+for example. When set to zero, the default, the connetion is kept open for as
+long as possible.
+
=item B<LogSendErrors> B<false>|B<true>
If set to B<true> (the default), logs errors when sending data to I<Graphite>.
all the data in the current send buffer will probably be lost. Defaults to 0,
which means the connection never times out.
+=item B<LogHttpError> B<false>|B<true>
+
+Enables printing of HTTP error code to log. Turned off by default.
+
The C<write_http> plugin regularly submits the collected values to the HTTP
server. How frequently this happens depends on how much data you are collecting
and the size of B<BufferSize>. The optimal value to set B<Timeout> to is
Host "localhost"
Port "6379"
Timeout 1000
+ Prefix "collectd/"
+ Database 1
+ MaxSetSize -1
+ StoreRates true
</Node>
</Plugin>
Values are submitted to I<Sorted Sets>, using the metric name as the key, and
the timestamp as the score. Retrieving a date range can then be done using the
C<ZRANGEBYSCORE> I<Redis> command. Additionally, all the identifiers of these
-I<Sorted Sets> are kept in a I<Set> called C<collectd/values> and can be
-retrieved using the C<SMEMBERS> I<Redis> command. See
+I<Sorted Sets> are kept in a I<Set> called C<collectd/values> (or
+C<${prefix}/values> if the B<Prefix> option was specified) and can be retrieved
+using the C<SMEMBERS> I<Redis> command. You can specify the database to use
+with the B<Database> parameter (default is C<0>). See
L<http://redis.io/commands#sorted_set> and L<http://redis.io/commands#set> for
details.
The B<Timeout> option sets the socket connection timeout, in milliseconds.
+=item B<Prefix> I<Prefix>
+
+Prefix used when constructing the name of the I<Sorted Sets> and the I<Set>
+containing all metrics. Defaults to C<collectd/>, so metrics will have names
+like C<collectd/cpu-0/cpu-user>. When setting this to something different, it
+is recommended but not required to include a trailing slash in I<Prefix>.
+
+=item B<Database> I<Index>
+
+This index selects the redis database to use for writing operations. Defaults
+to C<0>.
+
+=item B<MaxSetSize> I<Items>
+
+The B<MaxSetSize> option limits the number of items that the I<Sorted Sets> can
+hold. Negative values for I<Items> sets no limit, which is the default behavior.
+
+=item B<StoreRates> B<true>|B<false>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer number.
+
=back
=head2 Plugin C<write_riemann>
projects / collectd.git / blobdiff