If enabled, collectd will export all global symbols of the plugin (and of all
libraries loaded as dependencies of the plugin) and, thus, makes those symbols
available for resolving unresolved symbols in subsequently loaded plugins if
-that is supported by your system. By default, this is disabled.
+that is supported by your system.
-This is useful (or possibly even required), e.E<nbsp>g., when loading a plugin
-that embeds some scripting language into the daemon (e.E<nbsp>g. the C<perl>
-or C<python> plugins). Scripting languages usually provide means to load
+This is useful (or possibly even required), e.g., when loading a plugin that
+embeds some scripting language into the daemon (e.g. the I<Perl> and
+I<Python plugins>). Scripting languages usually provide means to load
extensions written in C. Those extensions require symbols provided by the
-interpreter, which is loaded as a dependency of the respective collectd
-plugin. See the documentation of those plugins (e.E<nbsp>g.,
-L<collectd-perl(5)> or L<collectd-python(5)>) for details.
+interpreter, which is loaded as a dependency of the respective collectd plugin.
+See the documentation of those plugins (e.g., L<collectd-perl(5)> or
+L<collectd-python(5)>) for details.
+
+By default, this is disabled. As a special exception, if the plugin name is
+either C<perl> or C<python>, the default is changed to enabled in order to keep
+the average user from ever having to deal with this low level linking stuff.
=back
this setting uses iterations, the maximum allowed time without update depends
on the I<Interval> information contained in each value list. This is used in
the I<Threshold> configuration to dispatch notifications about missing values,
-see L<"THRESHOLD CONFIGURATION"> below.
+see L<collectd-threshold(5)> for details.
=item B<ReadThreads> I<Num>
If B<Hostname> is determined automatically this setting controls whether or not
the daemon should try to figure out the "fully qualified domain name", FQDN.
-This is done using a lookup of the name returned by C<gethostname>.
-
-Using this feature (i.E<nbsp>e. setting this option to B<true>) is recommended.
-However, to preserve backwards compatibility the default is set to B<false>.
-The sample config file that is installed with C<makeE<nbsp>install> includes a
-line which sets this option, though, so that default installations will have
-this setting enabled.
+This is done using a lookup of the name returned by C<gethostname>. This option
+is enabled by default.
=item B<PreCacheChain> I<ChainName>
F<README> file shipped with the sourcecode and hopefully binary packets as
well.
+=head2 Plugin C<amqp>
+
+The I<AMQMP plugin> can be used to communicate with other instances of
+I<collectd> or third party applications using an AMQP message broker. Values
+are sent to or received from the broker, which handles routing, queueing and
+possibly filtering or messages.
+
+ <Plugin "amqp">
+ # Send values to an AMQP broker
+ <Publish "some_name">
+ Host "localhost"
+ Port "5672"
+ VHost "/"
+ User "guest"
+ Password "guest"
+ Exchange "amq.fanout"
+ # ExchangeType "fanout"
+ # RoutingKey "collectd"
+ # Persistent false
+ # Format "command"
+ # StoreRates false
+ </Publish>
+
+ # Receive values from an AMQP broker
+ <Subscribe "some_name">
+ Host "localhost"
+ Port "5672"
+ VHost "/"
+ User "guest"
+ Password "guest"
+ Exchange "amq.fanout"
+ # ExchangeType "fanout"
+ # Queue "queue_name"
+ # RoutingKey "collectd.#"
+ </Subscribe>
+ </Plugin>
+
+The plugin's configuration consists of a number of I<Publish> and I<Subscribe>
+blocks, which configure sending and receiving of values respectively. The two
+blocks are very similar, so unless otherwise noted, an option can be used in
+either block. The name given in the blocks starting tag is only used for
+reporting messages, but may be used to support I<flushing> of certain
+I<Publish> blocks in the future.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the AMQP broker. Defaults to the default behavior of
+the underlying communications library, I<rabbitmq-c>, which is "localhost".
+
+=item B<Port> I<Port>
+
+Service name or port number on which the AMQP broker accepts connections. This
+argument must be a string, even if the numeric form is used. Defaults to
+"5672".
+
+=item B<VHost> I<VHost>
+
+Name of the I<virtual host> on the AMQP broker to use. Defaults to "/".
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+Credentials used to authenticate to the AMQP broker. By default "guest"/"guest"
+is used.
+
+=item B<Exchange> I<Exchange>
+
+In I<Publish> blocks, this option specifies the I<exchange> to send values to.
+By default, "amq.fanout" will be used.
+
+In I<Subscribe> blocks this option is optional. If given, a I<binding> between
+the given exchange and the I<queue> is created, using the I<routing key> if
+configured. See the B<Queue> and B<RoutingKey> options below.
+
+=item B<ExchangeType> I<Type>
+
+If given, the plugin will try to create the configured I<exchange> with this
+I<type> after connecting. When in a I<Subscribe> block, the I<queue> will then
+be bound to this exchange.
+
+=item B<Queue> I<Queue> (Subscribe only)
+
+Configures the I<queue> name to subscribe to. If no queue name was configures
+explicitly, a unique queue name will be created by the broker.
+
+=item B<RoutingKey> I<Key>
+
+In I<Publish> blocks, this configures the routing key to set on all outgoing
+messages. If not given, the routing key will be computed from the I<identifier>
+of the value. The host, plugin, type and the two instances are concatenated
+together using dots as the separator and all containing dots replaced with
+slashes. For example "collectd.host/example/com.cpu.0.cpu.user". This makes it
+possible to receive only specific values using a "topic" exchange.
+
+In I<Subscribe> blocks, configures the I<routing key> used when creating a
+I<binding> between an I<exchange> and the I<queue>. The usual wildcards can be
+used to filter messages when using a "topic" exchange. If you're only
+interested in CPU statistics, you could use the routing key "collectd.*.cpu.#"
+for example.
+
+=item B<Persistent> B<true>|B<false> (Publish only)
+
+Selects the I<delivery method> to use. If set to B<true>, the I<persistent>
+mode will be used, i.e. delivery is guaranteed. If set to B<false> (the
+default), the I<transient> delivery mode will be used, i.e. messages may be
+lost due to high load, overflowing queues or similar issues.
+
+=item B<Format> B<Command>|B<JSON> (Publish only)
+
+Selects the format in which messages are sent to the broker. If set to
+B<Command> (the default), values are sent as C<PUTVAL> commands which are
+identical to the syntax used by the I<Exec> and I<UnixSock plugins>. In this
+case, the C<Content-Type> header field will be set to C<text/collectd>.
+
+If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
+an easy and straight forward exchange format. The C<Content-Type> header field
+will be set to C<application/json>.
+
+A subscribing client I<should> use the C<Content-Type> header field to
+determine how to decode the values. Currently, the I<AMQP plugin> itself can
+only decode the B<Command> format.
+
+=item B<StoreRates> B<true>|B<false> (Publish only)
+
+Determines whether or not C<COUNTER>, C<DERIVE> and C<ABSOLUTE> data sources
+are converted to a I<rate> (i.e. a C<GAUGE> value). If set to B<false> (the
+default), no conversion is performed. Otherwise the conversion is performed
+using the internal value cache.
+
+Please note that currently this option is only used if the B<Format> option has
+been set to B<JSON>.
+
+=back
+
=head2 Plugin C<apache>
To configure the C<apache>-plugin you first need to configure the Apache
also supported. It introduces a new field, called C<BusyServers>, to count the
number of currently connected clients. This field is also supported.
-The following options are accepted by the C<apache>-plugin:
+The configuration of the I<Apache> plugin consists of one or more
+C<E<lt>InstanceE<nbsp>/E<gt>> blocks. Each block requires one string argument
+as the instance name. For example:
+
+ <Plugin "apache">
+ <Instance "www1">
+ URL "http://www1.example.com/mod_status?auto"
+ </Instance>
+ <Instance "www2">
+ URL "http://www2.example.com/mod_status?auto"
+ </Instance>
+ </Plugin>
+
+The instance name will be used as the I<plugin instance>. To emulate the old
+(versionE<nbsp>4) behavior, you can use an empty string (""). In order for the
+plugin to work correctly, each instance name must be unique. This is not
+enforced by the plugin and it is your responsibility to ensure it.
+
+The following options are accepted within each I<Instance> block:
=over 4
Sets the URL of the C<mod_status> output. This needs to be the output generated
by C<ExtendedStatus on> and it needs to be the machine readable output
-generated by appending the C<?auto> argument.
+generated by appending the C<?auto> argument. This option is I<mandatory>.
=item B<User> I<Username>
</URL>
</Plugin>
-Another CouchDB example:
-The following example will collect the status values from each database:
-
- <URL "http://localhost:5984/_all_dbs">
- Instance "dbs"
- <Key "*/doc_count">
- Type "gauge"
- </Key>
- <Key "*/doc_del_count">
- Type "counter"
- </Key>
- <Key "*/disk_size">
- Type "bytes"
- </Key>
- </URL>
-
In the B<Plugin> block, there may be one or more B<URL> blocks, each defining
a URL to be fetched via HTTP (using libcurl) and one or more B<Key> blocks.
The B<Key> string argument must be in a path format, which is used to collect a
(the default), it will report a disk as "root", but with it I<true>, it will be
"sda1" (or whichever).
-=item B<ReportReserved> B<true>|B<false>
-
-When enabled, the blocks reserved for root are reported separately. When
-disabled (the default for backwards compatibility reasons) the reserved space
-will be included in the "free" space.
-
-When disabled, the "df" type will be used to store "free" and "used" space. The
-mount point or disk name (see option B<ReportByDevice>) is used as type
-instance in this case (again: backwards compatibility).
-
-When enabled, the type "df_complex" is used and three files are created. The
-mount point or disk name is used as plugin instance and the type instance is
-set to "free", "reserved" and "used" as appropriate.
-
-Enabling this option is recommended.
-
=item B<ReportInodes> B<true>|B<false>
Enables or disables reporting of free, reserved and used inodes. Defaults to
TCP-Port to connect to. Defaults to B<7634>.
-=item B<TranslateDevicename> I<true>|I<false>
-
-If enabled, translate the disk names to major/minor device numbers
-(e.E<nbsp>g. "8-0" for /dev/sda). For backwards compatibility this defaults to
-I<true> but it's recommended to disable it as it will probably be removed in
-the next major version.
-
=back
=head2 Plugin C<interface>
means to concatenate the guest name and UUID (with a literal colon character
between, thus I<"foo:1234-1234-1234-1234">).
+=item B<InterfaceFormat> B<name>|B<address>
+
+When the libvirt plugin logs interface data, it sets the name of the collected
+data according to this setting. The default is to use the path as provided by
+the hypervisor (the "dev" property of the target node), which is equal to
+setting B<name>.
+
+B<address> means use the interface's mac address. This is useful since the
+interface path might change between reboots of a guest or across migrations.
+
=back
=head2 Plugin C<logfile>
Sets the file to write log messages to. The special strings B<stdout> and
B<stderr> can be used to write to the standard output and standard error
-channels, respectively. This, of course, only makes much sense when collectd is
-running in foreground- or non-daemon-mode.
+channels, respectively. This, of course, only makes much sense when I<collectd>
+is running in foreground- or non-daemon-mode.
=item B<Timestamp> B<true>|B<false>
log file (e.E<nbsp>g. when rotating the logs). The plugin reopens the file
for each line it writes.
+=head2 Plugin C<lpar>
+
+The I<LPAR plugin> reads CPU statistics of I<Logical Partitions>, a
+virtualization technique for IBM POWER processors. It takes into account CPU
+time stolen from or donated to a partition, in addition to the usual user,
+system, I/O statistics.
+
+The following configuration options are available:
+
+=over 4
+
+=item B<CpuPoolStats> B<false>|B<true>
+
+When enabled, statistics about the processor pool are read, too. The partition
+needs to have pool authority in order to be able to acquire this information.
+Defaults to false.
+
+=item B<ReportBySerial> B<false>|B<true>
+
+If enabled, the serial of the physical machine the partition is currently
+running on is reported as I<hostname> and the logical hostname of the machine
+is reported in the I<plugin instance>. Otherwise, the logical hostname will be
+used (just like other plugins) and the I<plugin instance> will be empty.
+Defaults to false.
+
+=back
+
=head2 Plugin C<mbmon>
The C<mbmon plugin> uses mbmon to retrieve temperature, voltage, etc.
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
one or more databases when started and keeps the connection up as long as
possible. When the connection is interrupted for whatever reason it will try
-to re-connect. The plugin will complaint loudly in case anything goes wrong.
+to re-connect. The plugin will complain loudly in case anything goes wrong.
This plugin issues the MySQL C<SHOW STATUS> / C<SHOW GLOBAL STATUS> command
and collects information about MySQL network traffic, executed statements,
=item B<MaxPacketSize> I<1024-65535>
Set the maximum size for datagrams received over the network. Packets larger
-than this will be truncated.
+than this will be truncated. Defaults to 1452E<nbsp>bytes, which is the maximum
+payload size that can be transmitted in one Ethernet frame using IPv6E<nbsp>/
+UDP.
+
+On the server side, this limit should be set to the largest value used on
+I<any> client. Likewise, the value on the client must not be larger than the
+value on the server, or data will be lost.
+
+B<Compatibility:> Versions prior to I<versionE<nbsp>4.8> used a fixed sized
+buffer of 1024E<nbsp>bytes. Versions I<4.8>, I<4.9> and I<4.10> used a default
+value of 1024E<nbsp>bytes to avoid problems when sending data to an older
+server.
=item B<Forward> I<true|false>
necessary it's not a huge problem since the plugin has a duplicate detection,
so the values will not loop.
-=item B<CacheFlush> I<Seconds>
-
-For each host/plugin/type combination the C<network plugin> caches the time of
-the last value being sent or received. Every I<Seconds> seconds the plugin
-searches and removes all entries that are older than I<Seconds> seconds, thus
-freeing the unused memory again. Since this process is somewhat expensive and
-normally doesn't do much, this value should not be too small. The default is
-1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
-either.
-
=item B<ReportStats> B<true>|B<false>
The network plugin cannot only receive and send statistics, it can also create
The returned lines will be handled separately one after another.
-=item B<Query> I<sql query statement>
-
-This is a deprecated synonym for B<Statement>. It will be removed in version 5
-of collectd.
-
=item B<Param> I<hostname>|I<database>|I<username>|I<interval>
Specify the parameters which should be passed to the SQL query. The parameters
times. If multiple B<ValuesFrom> options are specified, the columns are read
in the given order.
-=item B<Column> I<type> [I<type instance>]
-
-This is a deprecated alternative to a B<Result> block. It will be removed in
-version 5 of collectd. It is equivalent to the following B<Result> block:
-
- <Result>
- Type I<type>
- InstancePrefix I<type instance>
- ValuesFrom I<name of the x. column>
- </Result>
-
-The order of the B<Column> options defines which columns of the query result
-should be used. The first option specifies the data found in the first column,
-the second option that of the second column, and so on.
-
=item B<MinVersion> I<version>
=item B<MaxVersion> I<version>
and patch-level versions, each represented as two-decimal-digit numbers. For
example, version 8.2.3 will become 80203.
-=item B<MinPGVersion> I<version>
-
-=item B<MaxPGVersion> I<version>
-
-These are deprecated synonyms for B<MinVersion> and B<MaxVersion>
-respectively. They will be removed in version 5 of collectd.
-
=back
The following predefined queries are available (the definitions can be found
=back
+=head2 Plugin C<redis>
+
+The I<Redis plugin> connects to one or more Redis servers and gathers
+information about each server's state. For each server there is a I<Node> block
+which configures the connection parameters for this node.
+
+ <Plugin redis>
+ <Node "example">
+ Host "localhost"
+ Port "6379"
+ Timeout 2000
+ </Node>
+ </Plugin>
+
+The information shown in the synopsis above is the I<default configuration>
+which is used by the plugin if no configuration is present.
+
+=over 4
+
+=item B<Node> I<Nodename>
+
+The B<Node> block identifies a new Redis node, that is a new Redis instance
+running in an specified host and port. The name for node is a canonical
+identifier which is used as I<plugin instance>. It is limited to
+64E<nbsp>characters in length.
+
+=item B<Host> I<Hostname>
+
+The B<Host> option is the hostname or IP-address where the Redis instance is
+running on.
+
+=item B<Port> I<Port>
+
+The B<Port> option is the TCP port on which the Redis instance accepts
+connections. Either a service name of a port number may be given. Please note
+that numerical port numbers must be given as a string, too.
+
+=item B<Timeout> I<Timeout in miliseconds>
+
+The B<Timeout> option set the socket timeout for node response. Since the Redis
+read function is blocking, you should keep this value as low as possible. Keep
+in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
+than B<Interval> defined globally.
+
+=back
+
=head2 Plugin C<rrdcached>
The C<rrdcached> plugin uses the RRDtool accelerator daemon, L<rrdcached(1)>,
=head2 Plugin C<sensors>
-The C<sensors plugin> uses B<lm_sensors> to retrieve sensor-values. This means
+The I<Sensors plugin> uses B<lm_sensors> to retrieve sensor-values. This means
that all the needed modules have to be loaded and lm_sensors has to be
configured (most likely by editing F</etc/sensors.conf>. Read
L<sensors.conf(5)> for details.
other plugins, its documentation has been moved to an own manpage,
L<collectd-snmp(5)>. Please see there for details.
+=head2 Plugin C<swap>
+
+The I<Swap plugin> collects information about used and available swap space. On
+I<Solaris>, the following options are available:
+
+=over 4
+
+=item B<ReportByDevice> B<false>|B<true>
+
+Configures how to report physical swap devices. If set to B<false> is used (the
+default), the summary over all swap devices is reported only, i.e. the globally
+used and available space over all devices. If B<true> is configured, the used
+and available space of each device will be reported separately.
+
+This option is only available if the I<Swap plugin> can use the L<swapctl(2)>
+mechanism under I<Solaris>.
+
+=back
+
=head2 Plugin C<syslog>
=over 4
=item B<ForceUseProcfs> I<true>|I<false>
-By default, the C<thermal> plugin tries to read the statistics from the Linux
+By default, the I<Thermal plugin> tries to read the statistics from the Linux
C<sysfs> interface. If that is not available, the plugin falls back to the
C<procfs> interface. By setting this option to I<true>, you can force the
plugin to use the latter. This option defaults to I<false>.
=back
+=head2 Plugin C<threshold>
+
+The I<Threshold plugin> checks values collected or received by I<collectd>
+against a configurable I<threshold> and issues I<notifications> if values are
+out of bounds.
+
+Documentation for this plugin is available in the L<collectd-threshold(5)>
+manual page.
+
=head2 Plugin C<tokyotyrant>
-The C<tokyotyrant plugin> connects to a TokyoTyrant server and collects a
+The I<TokyoTyrant plugin> connects to a TokyoTyrant server and collects a
couple metrics: number of records, and database size on disk.
=over 4
permissions must be given as a numeric, octal value as you would pass to
L<chmod(1)>. Defaults to B<0770>.
+=item B<DeleteSocket> B<false>|B<true>
+
+If set to B<true>, delete the socket file before calling L<bind(2)>, if a file
+with the given name already exists. If I<collectd> crashes a socket file may be
+left over, preventing the daemon from opening a new socket when restarted.
+Since this is potentially dangerous, this defaults to B<false>.
+
=back
=head2 Plugin C<uuid>
=back
+=head2 Plugin C<varnish>
+
+The Varnish plugin collects information about Varnish, an HTTP accelerator.
+
+=over 4
+
+=item B<CollectCache> B<true>|B<false>
+
+Cache hits and misses. True by default.
+
+=item B<CollectConnections> B<true>|B<false>
+
+Number of client connections received, accepted and dropped. True by default.
+
+=item B<CollectBackend> B<true>|B<false>
+
+Back-end connection statistics, such as successful, reused,
+and closed connections. True by default.
+
+=item B<CollectSHM> B<true>|B<false>
+
+Statistics about the shared memory log, a memory region to store
+log messages which is flushed to disk when full. True by default.
+
+=item B<CollectESI> B<true>|B<false>
+
+Edge Side Includes (ESI) parse statistics. False by default.
+
+=item B<CollectFetch> B<true>|B<false>
+
+Statistics about fetches (HTTP requests sent to the backend). False by default.
+
+=item B<CollectHCB> B<true>|B<false>
+
+Inserts and look-ups in the crit bit tree based hash. Look-ups are
+divided into locked and unlocked look-ups. False by default.
+
+=item B<CollectSMA> B<true>|B<false>
+
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
+The umem storage component is Solaris specific. False by default.
+
+=item B<CollectSMS> B<true>|B<false>
+
+synth (synthetic content) storage statistics. This storage
+component is used internally only. False by default.
+
+=item B<CollectSM> B<true>|B<false>
+
+file (memory mapped file) storage statistics. False by default.
+
+=item B<CollectTotals> B<true>|B<false>
+
+Collects overview counters, such as the number of sessions created,
+the number of requests and bytes transferred. False by default.
+
+=item B<CollectWorkers> B<true>|B<false>
+
+Collect statistics about worker threads. False by default.
+
+=back
+
=head2 Plugin C<vmem>
The C<vmem> plugin collects information about the usage of virtual memory.
projects / collectd.git / blobdiff