sure B<cpufreqd> (L<http://cpufreqd.sourceforge.net/>) or a similar tool is
installed and an "cpu governor" (that's a kernel module) is loaded.
+If the system has the I<cpufreq-stats> kernel module loaded, this plugin reports
+the rate of p-state (cpu frequency) transitions and the percentage of time spent
+in each p-state.
+
=head2 Plugin C<cpusleep>
This plugin doesn't have any options. It reads CLOCK_BOOTTIME and
<Page "stock_quotes">
Plugin "quotes"
URL "http://finance.google.com/finance?q=NYSE%3AAMD"
+ AddressFamily "any"
User "foo"
Password "bar"
Digest false
URL of the web site to retrieve. Since a regular expression will be used to
extract information from this data, non-binary data is a big plus here ;)
+=item B<AddressFamily> I<Type>
+
+IP version to resolve URL to. Useful in cases when hostname in URL resolves
+to both IPv4 and IPv6 addresses, and you are interested in using one of them
+specifically.
+Use C<ipv4> to enforce IPv4, C<ipv6> to enforce IPv6, or C<any> to keep the
+default behavior of resolving addresses to all IP versions your system allows.
+If C<libcurl> is compiled without IPv6 support, using C<ipv6> will result in
+a warning and fallback to C<any>.
+If C<Type> cannot be parsed, a warning will be printed and the whole B<Page>
+block will be ignored.
+
=item B<User> I<Name>
Username to use if authorization is required to read the page.
<Plugin curl_json>
<URL "http://localhost:5984/_stats">
+ AddressFamily "any"
Instance "httpd"
<Key "httpd/requests/count">
Type "http_requests"
=over 4
+=item B<AddressFamily> I<Type>
+
+IP version to resolve URL to. Useful in cases when hostname in URL resolves
+to both IPv4 and IPv6 addresses, and you are interested in using one of them
+specifically.
+Use C<ipv4> to enforce IPv4, C<ipv6> to enforce IPv6, or C<any> to keep the
+default behavior of resolving addresses to all IP versions your system allows.
+If C<libcurl> is compiled without IPv6 support, using C<ipv6> will result in
+a warning and fallback to C<any>.
+If C<Type> cannot be parsed, a warning will be printed and the whole B<URL>
+block will be ignored.
+
=item B<Host> I<Name>
Use I<Name> as the host name when submitting values. Defaults to the global
<Plugin "curl_xml">
<URL "http://localhost/stats.xml">
+ AddressFamily "any"
Host "my_host"
#Plugin "curl_xml"
Instance "some_instance"
=over 4
+=item B<AddressFamily> I<Type>
+
+IP version to resolve URL to. Useful in cases when hostname in URL resolves
+to both IPv4 and IPv6 addresses, and you are interested in using one of them
+specifically.
+Use C<ipv4> to enforce IPv4, C<ipv6> to enforce IPv6, or C<any> to keep the
+default behavior of resolving addresses to all IP versions your system allows.
+If C<libcurl> is compiled without IPv6 support, using C<ipv6> will result in
+a warning and fallback to C<any>.
+If C<Type> cannot be parsed, a warning will be printed and the whole B<URL>
+block will be ignored.
+
=item B<Host> I<Name>
Use I<Name> as the host name when submitting values. Defaults to the global
=back
+=head2 Plugin C<gpu_nvidia>
+
+Efficiently collects various statistics from the system's NVIDIA GPUs using the
+NVML library. Currently collected are fan speed, core temperature, percent
+load, percent memory used, compute and memory frequencies, and power
+consumption.
+
+=over 4
+
+=item B<GPUIndex>
+
+If one or more of these options is specified, only GPUs at that index (as
+determined by nvidia-utils through I<nvidia-smi>) have statistics collected.
+If no instance of this option is specified, all GPUs are monitored.
+
+=item B<IgnoreSelected>
+
+If set to true, all detected GPUs B<except> the ones at indices specified by
+B<GPUIndex> entries are collected. For greater clarity, setting IgnoreSelected
+without any GPUIndex directives will result in B<no> statistics being
+collected.
+
+=back
+
=head2 Plugin C<grpc>
The I<grpc> plugin provides an RPC interface to submit values to or query
if there is only one package and C<pkgE<lt>nE<gt>-coreE<lt>mE<gt>> if there is
more than one, where I<n> is the n-th core of package I<m>.
+=item B<RestoreAffinityPolicy> I<AllCPUs>|I<Restore>
+
+Reading data from CPU has side-effect: collectd process's CPU affinity mask
+changes. After reading data is completed, affinity mask needs to be restored.
+This option allows to set restore policy.
+
+B<AllCPUs> (the default): Restore the affinity by setting affinity to any/all
+CPUs.
+
+B<Restore>: Save affinity using sched_getaffinity() before reading data and
+restore it after.
+
+On some systems, sched_getaffinity() will fail due to inconsistency of the CPU
+set size between userspace and kernel. In these cases plugin will detect the
+unsuccessful call and fail with an error, preventing data collection.
+Most of configurations does not need to save affinity as Collectd process is
+allowed to run on any/all available CPUs.
+
+If you need to save and restore affinity and get errors like 'Unable to save
+the CPU affinity', setting 'possible_cpus' kernel boot option may also help.
+
+See following links for details:
+
+L<https://github.com/collectd/collectd/issues/1593>
+L<https://sourceware.org/bugzilla/show_bug.cgi?id=15630>
+L<https://bugzilla.kernel.org/show_bug.cgi?id=151821>
+
=back
=head2 Plugin C<unixsock>
=over 4
+=item B<Host> I<Host>
+
+Bind to the hostname / address I<Host>. By default, the plugin will bind to the
+"any" address, i.e. accept packets sent to any of the hosts addresses.
+
+This option is supported only for libmicrohttpd newer than 0.9.0.
+
=item B<Port> I<Port>
Port the embedded webserver should listen on. Defaults to B<9103>.
=back
+=head2 Plugin C<write_stackdriver>
+
+The C<write_stackdriver> plugin writes metrics to the
+I<Google Stackdriver Monitoring> service.
+
+This plugin supports two authentication methods: When configured, credentials
+are read from the JSON credentials file specified with B<CredentialFile>.
+Alternatively, when running on
+I<Google Compute Engine> (GCE), an I<OAuth> token is retrieved from the
+I<metadata server> and used to authenticate to GCM.
+
+B<Synopsis:>
+
+ <Plugin write_stackdriver>
+ CredentialFile "/path/to/service_account.json"
+ <Resource "global">
+ Label "project_id" "monitored_project"
+ </Resource>
+ </Plugin>
+
+=over 4
+
+=item B<CredentialFile> I<file>
+
+Path to a JSON credentials file holding the credentials for a GCP service
+account.
+
+If B<CredentialFile> is not specified, the plugin uses I<Application Default
+Credentials>. That means which credentials are used depends on the environment:
+
+=over 4
+
+=item
+
+The environment variable C<GOOGLE_APPLICATION_CREDENTIALS> is checked. If this
+variable is specified it should point to a JSON file that defines the
+credentials.
+
+=item
+
+The path C<${HOME}/.config/gcloud/application_default_credentials.json> is
+checked. This where credentials used by the I<gcloud> command line utility are
+stored. You can use C<gcloud auth application-default login> to create these
+credentials.
+
+Please note that these credentials are often of your personal account, not a
+service account, and are therefore unfit to be used in a production
+environment.
+
+=item
+
+When running on GCE, the built-in service account associated with the virtual
+machine instance is used.
+See also the B<Email> option below.
+
+=back
+
+=item B<Project> I<Project>
+
+The I<Project ID> or the I<Project Number> of the I<Stackdriver Account>. The
+I<Project ID> is a string identifying the GCP project, which you can chose
+freely when creating a new project. The I<Project Number> is a 12-digit decimal
+number. You can look up both on the I<Developer Console>.
+
+This setting is optional. If not set, the project ID is read from the
+credentials file or determined from the GCE's metadata service.
+
+=item B<Email> I<Email> (GCE only)
+
+Choses the GCE I<Service Account> used for authentication.
+
+Each GCE instance has a C<default> I<Service Account> but may also be
+associated with additional I<Service Accounts>. This is often used to restrict
+the permissions of services running on the GCE instance to the required
+minimum. The I<write_stackdriver plugin> requires the
+C<https://www.googleapis.com/auth/monitoring> scope. When multiple I<Service
+Accounts> are available, this option selects which one is used by
+I<write_stackdriver plugin>.
+
+=item B<Resource> I<ResourceType>
+
+Configures the I<Monitored Resource> to use when storing metrics.
+More information on I<Monitored Resources> and I<Monitored Resource Types> are
+available at L<https://cloud.google.com/monitoring/api/resources>.
+
+This block takes one string argument, the I<ResourceType>. Inside the block are
+one or more B<Label> options which configure the resource labels.
+
+This block is optional. The default value depends on the runtime environment:
+on GCE, the C<gce_instance> resource type is used, otherwise the C<global>
+resource type ist used:
+
+=over 4
+
+=item
+
+B<On GCE>, defaults to the equivalent of this config:
+
+ <Resource "gce_instance">
+ Label "project_id" "<project_id>"
+ Label "instance_id" "<instance_id>"
+ Label "zone" "<zone>"
+ </Resource>
+
+The values for I<project_id>, I<instance_id> and I<zone> are read from the GCE
+metadata service.
+
+=item
+
+B<Elsewhere>, i.e. not on GCE, defaults to the equivalent of this config:
+
+ <Resource "global">
+ Label "project_id" "<Project>"
+ </Resource>
+
+Where I<Project> refers to the value of the B<Project> option or the project ID
+inferred from the B<CredentialFile>.
+
+=back
+
+=item B<Url> I<Url>
+
+URL of the I<Stackdriver Monitoring> API. Defaults to
+C<https://monitoring.googleapis.com/v3>.
+
+=back
+
=head2 Plugin C<xencpu>
This plugin collects metrics of hardware CPU load for machine running Xen
projects / collectd.git / blobdiff