=item B<PostCacheChain> I<ChainName>
Configure the name of the "pre-cache chain" and the "post-cache chain". Please
-see L<FILTER CONFIGURATION> below on information on chains and how these
+see L</"FILTER CONFIGURATION"> below on information on chains and how these
setting change the daemon's behavior.
=back
=head2 Plugin C<amqp>
The I<AMQP plugin> can be used to communicate with other instances of
-I<collectd> or third party applications using an AMQP message broker. Values
-are sent to or received from the broker, which handles routing, queueing and
-possibly filtering out messages.
+I<collectd> or third party applications using an AMQP 0.9.1 message broker.
+Values are sent to or received from the broker, which handles routing,
+queueing and possibly filtering out messages.
B<Synopsis:>
=back
+=head2 Plugin C<amqp1>
+
+The I<AMQP1 plugin> can be used to communicate with other instances of
+I<collectd> or third party applications using an AMQP 1.0 message
+intermediary. Metric values or notifications are sent to the
+messaging intermediary which may handle direct messaging or
+queue based transfer.
+
+B<Synopsis:>
+
+ <Plugin "amqp1">
+ # Send values to an AMQP 1.0 intermediary
+ <Transport "name">
+ Host "localhost"
+ Port "5672"
+ User "guest"
+ Password "guest"
+ Address "collectd"
+# RetryDelay 1
+ <Instance "some_name">
+ Format "command"
+ PreSettle false
+ Notify false
+ # StoreRates false
+ # GraphitePrefix "collectd."
+ # GraphiteEscapeChar "_"
+ # GraphiteSeparateInstances false
+ # GraphiteAlwaysAppendDS false
+ # GraphitePreserveSeparator false
+ </Instance>
+ </Transport>
+ </Plugin>
+
+The plugin's configuration consists of a I<Transport> that configures
+communications to the AMQP 1.0 messaging bus and one or more I<Instance>
+corresponding to metric or event publishers to the messaging system.
+
+The address in the I<Transport> block concatenated with the name given in the
+I<Instance> block starting tag will be used as the send-to address for
+communications over the messaging link.
+
+The following options are accepted within each I<Transport> block:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Hostname or IP-address of the AMQP 1.0 intermediary. Defaults to the
+default behavior of the underlying communications library,
+I<libqpid-proton>, which is "localhost".
+
+=item B<Port> I<Port>
+
+Service name or port number on which the AMQP 1.0 intermediary accepts
+connections. This argument must be a string, even if the numeric form
+is used. Defaults to "5672".
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+Credentials used to authenticate to the AMQP 1.0 intermediary. By
+default "guest"/"guest" is used.
+
+=item B<Address> I<Address>
+
+This option specifies the prefix for the send-to value in the message.
+By default, "collectd" will be used.
+
+=item B<RetryDelay> I<RetryDelay>
+
+When the AMQP1 connection is lost, defines the time in seconds to wait
+before attempting to reconnect. Defaults to 1, which implies attempt
+to reconnect at 1 second intervals.
+
+=back
+
+The following options are accepted within each I<Instance> block:
+
+=over 4
+
+=item B<Format> B<Command>|B<JSON>|B<Graphite>
+
+Selects the format in which messages are sent to the intermediary. If set to
+B<Command> (the default), values are sent as C<PUTVAL> commands which are
+identical to the syntax used by the I<Exec> and I<UnixSock plugins>. In this
+case, the C<Content-Type> header field will be set to C<text/collectd>.
+
+If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
+an easy and straight forward exchange format. The C<Content-Type> header field
+will be set to C<application/json>.
+
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+"<metric> <value> <timestamp>\n". The C<Content-Type> header field will be set to
+C<text/graphite>.
+
+A subscribing client I<should> use the C<Content-Type> header field to
+determine how to decode the values.
+
+=item B<PreSettle> B<true>|B<false>
+
+If set to B<false> (the default), the plugin will wait for a message
+acknowledgement from the messaging bus before sending the next
+message. This indicates transfer of ownership to the messaging
+system. If set to B<true>, the plugin will not wait for a message
+acknowledgement and the message may be dropped prior to transfer of
+ownership.
+
+=item B<Notify> B<true>|B<false>
+
+If set to B<false> (the default), the plugin will service the
+instance write call back as a value list. If set to B<true> the
+plugin will service the instance as a write notification callback
+for alert formatting.
+
+=item B<StoreRates> B<true>|B<false>
+
+Determines whether or not C<COUNTER>, C<DERIVE> and C<ABSOLUTE> data sources
+are converted to a I<rate> (i.e. a C<GAUGE> value). If set to B<false> (the
+default), no conversion is performed. Otherwise the conversion is performed
+using the internal value cache.
+
+Please note that currently this option is only used if the B<Format> option has
+been set to B<JSON>.
+
+=item B<GraphitePrefix>
+
+A prefix can be added in the metric name when outputting in the I<Graphite> format.
+It's added before the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphitePostfix>
+
+A postfix can be added in the metric name when outputting in the I<Graphite> format.
+It's added after the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphiteEscapeChar>
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is "_" (I<Underscore>).
+
+=item B<GraphiteSeparateInstances> B<true>|B<false>
+
+If set to B<true>, the plugin instance and type instance will be in their own
+path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
+default), the plugin and plugin instance (and likewise the type and type
+instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+
+=item B<GraphiteAlwaysAppendDS> B<true>|B<false>
+
+If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=item B<GraphitePreserveSeparator> B<false>|B<true>
+
+If set to B<false> (the default) the C<.> (dot) character is replaced with
+I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
+is preserved, i.e. passed through.
+
+=back
+
=head2 Plugin C<apache>
To configure the C<apache>-plugin you first need to configure the Apache
collected or if they are ignored is controlled by the B<IgnoreSelected> option;
see below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all cgroups I<except> the ones that
When set to B<true>, reports the number of available CPUs.
Defaults to B<false>.
+=item B<ReportGuestState> B<false>|B<true>
+
+When set to B<true>, reports the "guest" and "guest_nice" CPU states.
+Defaults to B<false>.
+
+=item B<SubtractGuestState> B<false>|B<true>
+
+This option is only considered when B<ReportGuestState> is set to B<true>.
+"guest" and "guest_nice" are included in respectively "user" and "nice".
+If set to B<true>, "guest" will be subtracted from "user" and "guest_nice"
+will be subtracted from "nice".
+Defaults to B<true>.
+
=back
=head2 Plugin C<cpufreq>
sure B<cpufreqd> (L<http://cpufreqd.sourceforge.net/>) or a similar tool is
installed and an "cpu governor" (that's a kernel module) is loaded.
+If the system has the I<cpufreq-stats> kernel module loaded, this plugin reports
+the rate of p-state (cpu frequency) transitions and the percentage of time spent
+in each p-state.
+
=head2 Plugin C<cpusleep>
This plugin doesn't have any options. It reads CLOCK_BOOTTIME and
<Plugin curl>
<Page "stock_quotes">
+ Plugin "quotes"
URL "http://finance.google.com/finance?q=NYSE%3AAMD"
User "foo"
Password "bar"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<curl>.
+
=item B<URL> I<URL>
URL of the web site to retrieve. Since a regular expression will be used to
B<MeasureResponseCode> options are set to B<true>, B<Match> blocks are
optional.
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+URL. By default the global B<Interval> setting will be used.
+
=item B<Timeout> I<Milliseconds>
The B<Timeout> option sets the overall timeout for HTTP requests to B<URL>, in
Use I<Name> as the host name when submitting values. Defaults to the global
host name setting.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<curl_json>.
+
=item B<Instance> I<Instance>
Sets the plugin instance to I<Instance>.
<Plugin "curl_xml">
<URL "http://localhost/stats.xml">
Host "my_host"
+ #Plugin "curl_xml"
Instance "some_instance"
User "collectd"
Password "thaiNg0I"
Type "magic_level"
#InstancePrefix "prefix-"
InstanceFrom "td[1]"
+ #PluginInstanceFrom "td[1]"
ValuesFrom "td[2]/span[@class=\"level\"]"
</XPath>
</URL>
Use I<Name> as the host name when submitting values. Defaults to the global
host name setting.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to 'curl_xml'.
+
=item B<Instance> I<Instance>
-Use I<Instance> as the plugin instance when submitting values. Defaults to an
-empty string (no plugin instance).
+Use I<Instance> as the plugin instance when submitting values.
+May be overridden by B<PluginInstanceFrom> option inside B<XPath> blocks.
+Defaults to an empty string (no plugin instance).
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+URL. By default the global B<Interval> setting will be used.
=item B<Namespace> I<Prefix> I<URL>
XPath expression must return exactly one element. The element's value is then
used as I<type instance>, possibly prefixed with I<InstancePrefix> (see above).
-This value is required. As a special exception, if the "base XPath expression"
-(the argument to the B<XPath> block) returns exactly one argument, then this
-option may be omitted.
+=item B<PluginInstanceFrom> I<PluginInstanceFrom>
+
+Specifies a XPath expression to use for determining the I<plugin instance>. The
+XPath expression must return exactly one element. The element's value is then
+used as I<plugin instance>.
+
+=back
+
+If the "base XPath expression" (the argument to the B<XPath> block) returns
+exactly one argument, then I<InstanceFrom> and I<PluginInstanceFrom> may be omitted.
+Otherwise, at least one of I<InstanceFrom> or I<PluginInstanceFrom> is required.
+
+=over 4
=item B<ValuesFrom> I<ValuesFrom> [I<ValuesFrom> ...]
I<type> specified with B<Type> (see above). Each XPath expression must return
exactly one element. The element's value is then parsed as a number and used as
value for the appropriate value in the value list dispatched to the daemon.
+This option is required.
=back
</Result>
</Query>
<Database "product_information">
+ #Plugin "warehouse"
Driver "mysql"
Interval 120
DriverOption "host" "localhost"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<dbi>.
+
=item B<Interval> I<Interval>
Sets the interval (in seconds) in which the values will be collected from this
Select partitions based on the devicename.
+See F</"IGNORELISTS"> for details.
+
=item B<MountPoint> I<Directory>
Select partitions based on the mountpoint.
+See F</"IGNORELISTS"> for details.
+
=item B<FSType> I<FSType>
Select partitions based on the filesystem type.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all partitions B<except> the ones that
Disk "sdd"
Disk "/hda[34]/"
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Sets whether selected disks, i.E<nbsp>e. the ones matches by any of the B<Disk>
<EAL>
Coremask "0x1"
MemoryChannels "4"
- ProcessType "secondary"
FilePrefix "rte"
</EAL>
<Event "link_status">
=head3 The EAL block
-=over 5
+=over 4
=item B<Coremask> I<Mask>
Number of memory channels per processor socket.
-=item B<ProcessType> I<type>
-
-The type of DPDK process instance.
-
=item B<FilePrefix> I<File>
The prefix text used for hugepage filenames. The filename will be set to
=head4 Link Status event
-=over 5
+=over 4
=item B<SendEventOnUpdate> I<true|false>
=head4 Keep Alive event
-=over 5
+=over 4
=item B<SendEventOnUpdate> I<true|false>
<EAL>
Coremask "0x4"
MemoryChannels "4"
- ProcessType "secondary"
FilePrefix "rte"
SocketMemory "1024"
+ LogLevel "7"
+ RteDriverLibPath "/usr/lib/dpdk-pmd"
</EAL>
SharedMemObj "dpdk_collectd_stats_0"
EnabledPortMask 0xffff
=head3 The EAL block
-=over 5
+=over 4
=item B<Coremask> I<Mask>
A string containing a number of memory channels per processor socket.
-=item B<ProcessType> I<type>
-
-A string containing the type of DPDK process instance.
-
=item B<FilePrefix> I<File>
The prefix text used for hugepage filenames. The filename will be set to
A string containing amount of Memory to allocate from hugepages on specific
sockets in MB. This is an optional value.
+=item B<LogLevel> I<LogLevel_number>
+
+A string containing log level number. This parameter is optional.
+If parameter is not present then default value "7" - (INFO) is used.
+Value "8" - (DEBUG) can be set to enable debug traces.
+
+=item B<RteDriverLibPath> I<Path>
+
+A string containing path to shared pmd driver lib or path to directory,
+where shared pmd driver libs are available. This parameter is optional.
+This parameter enable loading of shared pmd driver libs from defined path.
+E.g.: "/usr/lib/dpdk-pmd/librte_pmd_i40e.so"
+or "/usr/lib/dpdk-pmd"
+
=back
=over 3
=item B<SharedMemObj> I<Mask>
+
A string containing the name of the shared memory object that should be used to
share stats from the DPDK secondary process to the collectd dpdkstat plugin.
Defaults to dpdk_collectd_stats if no other value is configured.
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to B<filecount>.
+
=item B<Instance> I<Instance>
-Sets the plugin instance to I<Instance>. That instance name must be unique, but
-it's your responsibility, the plugin doesn't check for that. If not given, the
-instance is set to the directory name with all slashes replaced by underscores
-and all leading underscores removed.
+Sets the plugin instance to I<Instance>. If not given, the instance is set to
+the directory name with all slashes replaced by underscores and all leading
+underscores removed. Empty value is allowed.
=item B<Name> I<Pattern>
"Hidden" files and directories are those, whose name begins with a dot.
Defaults to I<false>, i.e. by default hidden files and directories are ignored.
+=item B<RegularOnly> I<true>|I<false>
+
+Controls whether or not to include only regular files in the count.
+Defaults to I<true>, i.e. by default non regular files are ignored.
+
+=item B<FilesSizeType> I<Type>
+
+Sets the type used to dispatch files combined size. Empty value ("") disables
+reporting. Defaults to B<bytes>.
+
+=item B<FilesCountType> I<Type>
+
+Sets the type used to dispatch number of files. Empty value ("") disables
+reporting. Defaults to B<files>.
+
+=item B<TypeInstance> I<Instance>
+
+Sets the I<type instance> used to dispatch values. Defaults to an empty string
+(no plugin instance).
+
=back
=head2 Plugin C<GenericJMX>
=back
+=head2 Plugin C<gpu_nvidia>
+
+Efficiently collects various statistics from the system's NVIDIA GPUs using the
+NVML library. Currently collected are fan speed, core temperature, percent
+load, percent memory used, compute and memory frequencies, and power
+consumption.
+
+=over 4
+
+=item B<GPUIndex>
+
+If one or more of these options is specified, only GPUs at that index (as
+determined by nvidia-utils through I<nvidia-smi>) have statistics collected.
+If no instance of this option is specified, all GPUs are monitored.
+
+=item B<IgnoreSelected>
+
+If set to true, all detected GPUs B<except> the ones at indices specified by
+B<GPUIndex> entries are collected. For greater clarity, setting IgnoreSelected
+without any GPUIndex directives will result in B<no> statistics being
+collected.
+
+=back
+
=head2 Plugin C<grpc>
The I<grpc> plugin provides an RPC interface to submit values to or query
Filenames specifying SSL certificate and key material to be used with SSL
connections.
+=item B<VerifyPeer> B<true>|B<false>
+
+When enabled, a valid client certificate is required to connect to the server.
+When disabled, a client certifiacte is not requested and any unsolicited client
+certificate is accepted.
+Enabled by default.
+
=back
=back
=back
+=head2 Plugin C<intel_pmu>
+
+The I<intel_pmu> plugin collects performance counters data on Intel CPUs using
+Linux perf interface. All events are reported on a per core basis.
+
+B<Synopsis:>
+
+ <Plugin intel_pmu>
+ ReportHardwareCacheEvents true
+ ReportKernelPMUEvents true
+ ReportSoftwareEvents true
+ EventList "/var/cache/pmu/GenuineIntel-6-2D-core.json"
+ HardwareEvents "L2_RQSTS.CODE_RD_HIT,L2_RQSTS.CODE_RD_MISS" "L2_RQSTS.ALL_CODE_RD"
+ Cores "0-3" "4,6" "[12-15]"
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<ReportHardwareCacheEvents> B<false>|B<true>
+
+Enable or disable measuring of hardware CPU cache events:
+ - L1-dcache-loads
+ - L1-dcache-load-misses
+ - L1-dcache-stores
+ - L1-dcache-store-misses
+ - L1-dcache-prefetches
+ - L1-dcache-prefetch-misses
+ - L1-icache-loads
+ - L1-icache-load-misses
+ - L1-icache-prefetches
+ - L1-icache-prefetch-misses
+ - LLC-loads
+ - LLC-load-misses
+ - LLC-stores
+ - LLC-store-misses
+ - LLC-prefetches
+ - LLC-prefetch-misses
+ - dTLB-loads
+ - dTLB-load-misses
+ - dTLB-stores
+ - dTLB-store-misses
+ - dTLB-prefetches
+ - dTLB-prefetch-misses
+ - iTLB-loads
+ - iTLB-load-misses
+ - branch-loads
+ - branch-load-misses
+
+=item B<ReportKernelPMUEvents> B<false>|B<true>
+
+Enable or disable measuring of the following events:
+ - cpu-cycles
+ - instructions
+ - cache-references
+ - cache-misses
+ - branches
+ - branch-misses
+ - bus-cycles
+
+=item B<ReportSoftwareEvents> B<false>|B<true>
+
+Enable or disable measuring of software events provided by kernel:
+ - cpu-clock
+ - task-clock
+ - context-switches
+ - cpu-migrations
+ - page-faults
+ - minor-faults
+ - major-faults
+ - alignment-faults
+ - emulation-faults
+
+=item B<EventList> I<filename>
+
+JSON performance counter event list file name. To be able to monitor all Intel
+CPU specific events JSON event list file should be downloaded. Use the pmu-tools
+event_download.py script to download event list for current CPU.
+
+=item B<HardwareEvents> I<events>
+
+This field is a list of event names or groups of comma separated event names.
+This option requires B<EventList> option to be configured.
+
+=item B<Cores> I<cores groups>
+
+All events are reported on a per core basis. Monitoring of the events can be
+configured for a group of cores (aggregated statistics). This field defines
+groups of cores on which to monitor supported events. The field is represented
+as list of strings with core group values. Each string represents a list of
+cores in a group. If a group is enclosed in square brackets each core is added
+individually to a separate group (that is statistics are not aggregated).
+Allowed formats are:
+ 0,1,2,3
+ 0-10,20-18
+ 1,3,5-8,10,0x10-12
+ [4-15,32-63]
+
+If an empty string is provided as value for this field default cores
+configuration is applied - that is separate group is created for each core.
+
+=back
+
=head2 Plugin C<intel_rdt>
The I<intel_rdt> plugin collects information provided by monitoring features of
Select this interface. By default these interfaces will then be collected. For
a more detailed description see B<IgnoreSelected> below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
-If no configuration if given, the B<interface>-plugin will collect data from
+If no configuration is given, the B<interface>-plugin will collect data from
all interfaces. This may not be practical, especially for loopback- and
similar interfaces. Thus, you can use the B<Interface>-option to pick the
interfaces you're interested in. Sometimes, however, it's easier/preferred
=head2 Plugin C<ipmi>
+The B<ipmi plugin> allows to monitor server platform status using the Intelligent
+Platform Management Interface (IPMI). Local and remote interfaces are supported.
+
+The plugin configuration consists of one or more B<Instance> blocks which
+specify one I<ipmi> connection each. Each block requires one unique string
+argument as the instance name. If instances are not configured, an instance with
+the default option values will be created.
+
+For backwards compatibility, any option other than B<Instance> block will trigger
+legacy config handling and it will be treated as an option within B<Instance>
+block. This support will go away in the next major version of Collectd.
+
+Within the B<Instance> blocks, the following options are allowed:
+
=over 4
+=item B<Address> I<Address>
+
+Hostname or IP to connect to. If not specified, plugin will try to connect to
+local management controller (BMC).
+
+=item B<Username> I<Username>
+
+=item B<Password> I<Password>
+
+The username and the password to use for the connection to remote BMC.
+
+=item B<AuthType> I<MD5>|I<rmcp+>
+
+Forces the authentication type to use for the connection to remote BMC.
+By default most secure type is seleted.
+
+=item B<Host> I<Hostname>
+
+Sets the B<host> field of dispatched values. Defaults to the global hostname
+setting.
+
=item B<Sensor> I<Sensor>
Selects sensors to collect or to ignore, depending on B<IgnoreSelected>.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<ipmi> plugin will collect data from all
If you have for example dual power supply and one of them is (un)plugged then
a notification is sent.
+=item B<NotifyIPMIConnectionState> I<true>|I<false>
+
+If a IPMI connection state changes after initialization time of a minute
+a notification is sent. Defaults to B<false>.
+
+=item B<SELEnabled> I<true>|I<false>
+
+If system event log (SEL) is enabled, plugin will listen for sensor threshold
+and discrete events. When event is received the notification is sent.
+SEL event filtering can be configured using B<SELSensor> and B<SELIgnoreSelected>
+config options.
+Defaults to B<false>.
+
+=item B<SELSensor> I<SELSensor>
+
+Selects sensors to get events from or to ignore, depending on B<SELIgnoreSelected>.
+
+See F</"IGNORELISTS"> for details.
+
+=item B<SELIgnoreSelected> I<true>|I<false>
+
+If no configuration is given, the B<ipmi> plugin will pass events from all
+sensors. This option enables you to do that: By setting B<SELIgnoreSelected>
+to I<true> the effect of B<SELSensor> is inverted: All events from selected
+sensors are ignored and all events from other sensors are passed.
+
+=item B<SELClearEvent> I<true>|I<false>
+
+If SEL clear event is enabled, plugin will delete event from SEL list after
+it is received and successfully handled. In this case other tools that are
+subscribed for SEL events will receive an empty event.
+Defaults to B<false>.
+
=back
=head2 Plugin C<iptables>
Select this irq. By default these irqs will then be collected. For a more
detailed description see B<IgnoreSelected> below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<irq>-plugin will collect data from all
mcelog server is running. When the server is running, the plugin will tail the
specified logfile to retrieve machine check exception information and send a
notification with the details from the logfile. The plugin will use the mcelog
-client protocol to retrieve memory related machine check exceptions.
+client protocol to retrieve memory related machine check exceptions. Note that
+for memory exceptions, notifications are only sent when there is a change in
+the number of corrected/uncorrected memory errors.
-=over 4
+=head3 The Memory block
+
+Note: these options cannot be used in conjunction with the logfile options, they are mutually
+exclusive.
+
+=over 3
=item B<McelogClientSocket> I<Path>
Connect to the mcelog client socket using the UNIX domain socket at I<Path>.
Defaults to B<"/var/run/mcelog-client">.
+=item B<PersistentNotification> B<true>|B<false>
+Override default configuration to only send notifications when sent when there
+is a change in the number of corrected/uncorrected memory errors. When set to
+true notifications will be sent for every read cycle. Default is false. Does
+not affect the stats being dispatched.
+
+=back
+
+=over 4
+
=item B<McelogLogfile> I<Path>
-The mcelog file to parse. Defaults to B<"/var/log/mcelog">.
+The mcelog file to parse. Defaults to B<"/var/log/mcelog">. Note: this option
+cannot be used in conjunction with the memory block options, they are mutually
+exclusive.
=back
the device, i.e. the name of the block device without the leading C</dev/>.
See B<IgnoreSelected> for more details.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert device selection: If set to B<true>, all md devices B<except> those
<Page "plugin_instance">
Server "localhost"
Key "page_key"
+ Plugin "plugin_name"
<Match>
Regex "(\\d+) bytes sent"
DSType CounterAdd
When connected to the memcached server, asks for the page I<Key>.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<memcachec>.
+
=item E<lt>B<Match>E<gt>
Match blocks define which strings to look for and how matches substrings are
The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP or Modbus/RTU and
reads register values. It supports reading single registers (unsigned 16E<nbsp>bit
-values), large integer values (unsigned 32E<nbsp>bit values) and floating point
-values (two registers interpreted as IEEE floats in big endian notation).
+values), large integer values (unsigned 32E<nbsp>bit and 64E<nbsp>bit values) and
+floating point values (two registers interpreted as IEEE floats in big endian
+notation).
B<Synopsis:>
RegisterCmd ReadHolding
Type voltage
Instance "input-1"
+ #Scale 1.0
+ #Shift 0.0
</Data>
<Data "voltage-input-2">
B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
register will be read (the register number is increased by one).
-=item B<RegisterType> B<Int16>|B<Int32>|B<Uint16>|B<Uint32>|B<Float>
-
-Specifies what kind of data is returned by the device. If the type is B<Int32>,
-B<Uint32> or B<Float>, two 16E<nbsp>bit registers will be read and the data is
-combined into one value. Defaults to B<Uint16>.
+=item B<RegisterType> B<Int16>|B<Int32>|B<Int64>|B<Uint16>|B<Uint32>|B<UInt64>|B<Float>|B<Int32LE>|B<Uint32LE>|B<FloatLE>
+
+Specifies what kind of data is returned by the device. This defaults to
+B<Uint16>. If the type is B<Int32>, B<Int32LE>, B<Uint32>, B<Uint32LE>,
+B<Float> or B<FloatLE>, two 16E<nbsp>bit registers at B<RegisterBase>
+and B<RegisterBase+1> will be read and the data is combined into one
+32E<nbsp>value. For B<Int32>, B<Uint32> and B<Float> the most significant
+16E<nbsp>bits are in the register at B<RegisterBase> and the least
+significant 16E<nbsp>bits are in the register at B<RegisterBase+1>.
+For B<Int32LE>, B<Uint32LE>, or B<Float32LE>, the high and low order
+registers are swapped with the most significant 16E<nbsp>bits in
+the B<RegisterBase+1> and the least significant 16E<nbsp>bits in
+B<RegisterBase>. If the type is B<Int64> or B<UInt64>, four 16E<nbsp>bit
+registers at B<RegisterBase>, B<RegisterBase+1>, B<RegisterBase+2> and
+B<RegisterBase+3> will be read and the data combined into one
+64E<nbsp>value.
=item B<RegisterCmd> B<ReadHolding>|B<ReadInput>
=item B<Instance> I<Instance>
-Sets the type instance to use when dispatching the value to I<collectd>. If
+Sets the type instance to use when dispatching the value to I<Instance>. If
unset, an empty string (no type instance) is used.
+=item B<Scale> I<Value>
+
+The values taken from device are multiplied by I<Value>. The field is optional
+and the default is B<1.0>.
+
+=item B<Shift> I<Value>
+
+I<Value> is added to values from device after they have been multiplied by
+B<Scale> value. The field is optional and the default value is B<0.0>.
+
=back
=item E<lt>B<Host> I<Name>E<gt> blocks
Path to the PEM-encoded CA certificate file. Setting this option enables TLS
communication with the MQTT broker, and as such, B<Port> should be the TLS-enabled
port of the MQTT broker.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+This option enables the use of TLS.
=item B<CertificateFile> I<file>
Path to the PEM-encoded certificate file to use as client certificate when
connecting to the MQTT broker.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+Only valid if B<CACert> and B<CertificateKeyFile> are also set.
=item B<CertificateKeyFile> I<file>
Path to the unencrypted PEM-encoded key file corresponding to B<CertificateFile>.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+Only valid if B<CACert> and B<CertificateFile> are also set.
=item B<TLSProtocol> I<protocol>
C<tlsv1.2>) to use for the TLS connection to the broker. If not set a default
version is used which depends on the version of OpenSSL the Mosquitto library
was linked against.
+Only valid if B<CACert> is set.
=item B<CipherSuite> I<ciphersuite>
A string describing the ciphers available for use. See L<ciphers(1)> and the
C<openssl ciphers> utility for more information. If unset, the default ciphers
will be used.
-
+Only valid if B<CACert> is set.
=back
or SQL threads are not running. Defaults to B<false>.
=item B<WsrepStats> I<true|false>
-
+
Enable the collection of wsrep plugin statistics, used in Master-Master
replication setups like in MySQL Galera/Percona XtraDB Cluster.
User needs only privileges to execute 'SHOW GLOBAL STATUS'
-
+
=item B<ConnectTimeout> I<Seconds>
Sets the connect timeout for the MySQL client.
If no volume was specified at all for either of the three options, that data
will be collected for all available volumes.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelectedIO> B<true>|B<false>
=item B<IgnoreSelectedOps> B<true>|B<false>
namely octets, packets, and errors. These statistics are collected by
the C<interface> plugin, too, so using both at the same time is no benefit.
-When configured with B<VerboseInterface> all counters B<except> the basic ones,
-so that no data needs to be collected twice if you use the C<interface> plugin.
+When configured with B<VerboseInterface> all counters B<except> the basic ones
+will be collected, so that no data needs to be collected twice if you use the
+C<interface> plugin.
This includes dropped packets, received multicast packets, collisions and a
whole zoo of differentiated RX and TX errors. You can try the following command
to get an idea of what awaits you:
Filter "ppp0" "u32-1:0"
</Plugin>
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected>
The behavior is the same as with all other similar plugins: If nothing is
that the manual selection of an interface for unicast traffic is only
necessary in rare cases.
+=item B<BindAddress> I<IP Address>
+
+Set the outgoing IP address for IP packets. This option can be used instead of
+the I<Interface> option to explicitly define the IP address which will be used
+to send Packets to the remote server.
+
=item B<ResolveInterval> I<Seconds>
Sets the interval at which to re-resolve the DNS for the I<Host>. This is
=back
+=head2 Plugin C<nfs>
+
+The I<nfs plugin> collects information about the usage of the Network File
+System (NFS). It counts the number of procedure calls for each procedure,
+grouped by version and whether the system runs as server or client.
+
+It is possibly to omit metrics for a specific NFS version by setting one or
+more of the following options to B<false> (all of them default to B<true>).
+
+=over 4
+
+=item B<ReportV2> B<true>|B<false>
+
+=item B<ReportV3> B<true>|B<false>
+
+=item B<ReportV4> B<true>|B<false>
+
+=back
+
=head2 Plugin C<nginx>
This plugin collects the number of connections and requests handled by the
Example usage:
C<c_rehash /path/to/certs/folder>
+=item B<ConnectTimeout> I<Milliseconds>
+
+The B<ConnectTimeout> option sets the connect timeout, in milliseconds.
+By default, the configured B<Interval> is used to set the timeout.
+
=back
=head2 Plugin C<olsrd>
As there can be multiple devices on the bus you can list multiple sensor (use
multiple B<Sensor> elements).
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration is given, the B<onewire> plugin will collect data from all
traffic statistics about connected clients.
To set up OpenVPN to write to the status file periodically, use the
-B<--status> option of OpenVPN. Since OpenVPN can write two different formats,
-you need to set the required format, too. This is done by setting
-B<--status-version> to B<2>.
+B<--status> option of OpenVPN.
So, in a nutshell you need:
openvpn $OTHER_OPTIONS \
- --status "/var/run/openvpn-status" 10 \
- --status-version 2
+ --status "/var/run/openvpn-status" 10
Available options:
</Result>
</Query>
<Database "product_information">
+ #Plugin "warehouse"
ConnectID "db01"
Username "oracle"
Password "secret"
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<oracle>.
+
=item B<ConnectID> I<ID>
Defines the "database alias" or "service name" to connect to. Usually, these
enable the interface, OVS DB daemon should be running with C<--remote=ptcp:>
option. See L<ovsdb-server(1)> for more details. The option may be either
network hostname, IPv4 numbers-and-dots notation or IPv6 hexadecimal string
-format. Defaults to B<'localhost'>.
+format. Defaults to C<localhost>.
=item B<Port> I<service>
Address "127.0.0.1"
Socket "/var/run/openvswitch/db.sock"
Bridges "br0" "br_ext"
+ InterfaceStats false
</Plugin>
The plugin provides the following configuration options:
enable the interface, OVS DB daemon should be running with C<--remote=ptcp:>
option. See L<ovsdb-server(1)> for more details. The option may be either
network hostname, IPv4 numbers-and-dots notation or IPv6 hexadecimal string
-format. Defaults to B<'localhost'>.
+format. Defaults to C<localhost>.
=item B<Port> I<service>
Default: empty (monitor all bridges)
+=item B<InterfaceStats> B<false>|B<true>
+
+Indicates that the plugin should gather statistics for individual interfaces
+in addition to ports. This can be useful when monitoring an OVS setup with
+bond ports, where you might wish to know individual statistics for the
+interfaces included in the bonds. Defaults to B<false>.
+
+=back
+
+=head2 Plugin C<pcie_errors>
+
+The I<pcie_errors> plugin collects PCI Express errors from Device Status in Capability
+structure and from Advanced Error Reporting Extended Capability where available.
+At every read it polls config space of PCI Express devices and dispatches
+notification for every error that is set. It checks for new errors at every read.
+The device is indicated in plugin_instance according to format "domain:bus:dev.fn".
+Errors are divided into categories indicated by type_instance: "correctable", and
+for uncorrectable errors "non_fatal" or "fatal".
+Fatal errors are reported as I<NOTIF_FAILURE> and all others as I<NOTIF_WARNING>.
+
+B<Synopsis:>
+
+ <Plugin "pcie_errors">
+ Source "sysfs"
+ AccessDir "/sys/bus/pci"
+ ReportMasked false
+ PersistentNotifications false
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Source> B<sysfs>|B<proc>
+
+Use B<sysfs> or B<proc> to read data from /sysfs or /proc.
+The default value is B<sysfs>.
+
+=item B<AccessDir> I<dir>
+
+Directory used to access device config space. It is optional and defaults to
+/sys/bus/pci for B<sysfs> and to /proc/bus/pci for B<proc>.
+
+=item B<ReportMasked> B<false>|B<true>
+
+If true plugin will notify about errors that are set to masked in Error Mask register.
+Such errors are not reported to the PCI Express Root Complex. Defaults to B<false>.
+
+=item B<PersistentNotifications> B<false>|B<true>
+
+If false plugin will dispatch notification only on set/clear of error.
+The ones already reported will be ignored. Defaults to B<false>.
+
=back
=head2 Plugin C<perl>
=item B<Interval> I<Seconds>
Sets the interval in which to send ICMP echo packets to the configured hosts.
-This is B<not> the interval in which statistics are queries from the plugin but
-the interval in which the hosts are "pinged". Therefore, the setting here
-should be smaller than or equal to the global B<Interval> setting. Fractional
-times, such as "1.24" are allowed.
+This is B<not> the interval in which metrics are read from the plugin but the
+interval in which the hosts are "pinged". Therefore, the setting here should be
+smaller than or equal to the global B<Interval> setting. Fractional times, such
+as "1.24" are allowed.
Default: B<1.0>
Sets the source address to use. I<host> may either be a numerical network
address or a network hostname.
+=item B<AddressFamily> I<af>
+
+Sets the address family to use. I<af> may be "any", "ipv4" or "ipv6". This
+option will be ignored if you set a B<SourceAddress>.
+
=item B<Device> I<name>
Sets the outgoing network device to be used. I<name> has to specify an
</Writer>
<Database foo>
+ Plugin "kingdom"
Host "hostname"
Port "5432"
User "username"
<Database bar>
Interval 300
Service "service_name"
- Query backend # predefined
+ Query backends # predefined
Query rt36_tickets
</Database>
amount of time will be lost, for example, if a single statement within the
transaction fails or if the database server crashes.
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting query results from
+this B<Database>. Defaults to C<postgresql>.
+
=item B<Instance> I<name>
Specify the plugin instance name that should be used instead of the database
- number of processes
- number of threads
- number of open files (under Linux)
+ - number of memory mapped files (under Linux)
- io data (where available)
- context switches (under Linux)
- - minor and major pagefaults.
+ - minor and major pagefaults
+ - Delay Accounting information (Linux only, requires libmnl)
B<Synopsis:>
<Plugin processes>
- CollectFileDescriptor true
- CollectContextSwitch true
+ CollectFileDescriptor true
+ CollectContextSwitch true
+ CollectDelayAccounting false
Process "name"
ProcessMatch "name" "regex"
<Process "collectd">
- CollectFileDescriptor false
- CollectContextSwitch false
+ CollectFileDescriptor false
+ CollectContextSwitch false
+ CollectDelayAccounting true
</Process>
<ProcessMatch "name" "regex">
CollectFileDescriptor false
CollectContextSwitch true
- </Process>
+ </ProcessMatch>
</Plugin>
=over 4
Collect the number of context switches for matched processes.
Disabled by default.
+=item B<CollectDelayAccounting> I<Boolean>
+
+If enabled, collect Linux Delay Accounding information for matching processes.
+Delay Accounting provides the time processes wait for the CPU to become
+available, for I/O operations to finish, for pages to be swapped in and for
+freed pages to be reclaimed. The metrics are reported as "seconds per second"
+using the C<delay_rate> type, e.g. C<delay_rate-delay-cpu>.
+Disabled by default.
+
+This option is only available on Linux, requires the C<libmnl> library and
+requires the C<CAP_NET_ADMIN> capability at runtime.
+
=item B<CollectFileDescriptor> I<Boolean>
Collect number of file descriptors of matched processes.
Disabled by default.
+=item B<CollectMemoryMaps> I<Boolean>
+
+Collect the number of memory mapped files of the process.
+The limit for this number is configured via F</proc/sys/vm/max_map_count> in
+the Linux kernel.
+
=back
-Options B<CollectContextSwitch> and B<CollectFileDescriptor> may be used inside
-B<Process> and B<ProcessMatch> blocks - then they affect corresponding match
-only. Otherwise they set the default value for subsequent matches.
+The B<CollectContextSwitch>, B<CollectDelayAccounting>,
+B<CollectFileDescriptor> and B<CollectMemoryMaps> options may be used inside
+B<Process> and B<ProcessMatch> blocks. When used there, these options affect
+reporting the corresponding processes only. Outside of B<Process> and
+B<ProcessMatch> blocks these options set the default value for subsequent
+matches.
=head2 Plugin C<protocols>
depends on the B<IgnoreSelected>. By default, only matched values are selected.
If no value is configured at all, all values will be selected.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
If set to B<true>, inverts the selection made by B<Value>, i.E<nbsp>e. all
CollectRegistrationTable true
CollectDF true
CollectDisk true
+ CollectHealth true
</Router>
</Plugin>
When enabled, the number of sectors written and bad blocks will be collected.
Defaults to B<false>.
+=item B<CollectHealth> B<true>|B<false>
+
+When enabled, the health statistics will be collected. This includes the
+voltage and temperature on supported hardware.
+Defaults to B<false>.
+
=back
=head2 Plugin C<redis>
-The I<Redis plugin> connects to one or more Redis servers and gathers
-information about each server's state. For each server there is a I<Node> block
-which configures the connection parameters for this node.
+The I<Redis plugin> connects to one or more Redis servers, gathers
+information about each server's state and executes user-defined queries.
+For each server there is a I<Node> block which configures the connection
+parameters and set of user-defined queries for this node.
<Plugin redis>
<Node "example">
Host "localhost"
Port "6379"
+ #Socket "/var/run/redis/redis.sock"
Timeout 2000
+ ReportCommandStats false
+ ReportCpuUsage true
<Query "LLEN myqueue">
+ #Database 0
Type "queue_length"
Instance "myqueue"
- <Query>
+ </Query>
</Node>
</Plugin>
-The information shown in the synopsis above is the I<default configuration>
-which is used by the plugin if no configuration is present.
-
=over 4
=item B<Node> I<Nodename>
The B<Node> block identifies a new Redis node, that is a new Redis instance
running in an specified host and port. The name for node is a canonical
identifier which is used as I<plugin instance>. It is limited to
-64E<nbsp>characters in length.
+128E<nbsp>characters in length.
+
+When no B<Node> is configured explicitly, plugin connects to "localhost:6379".
=item B<Host> I<Hostname>
connections. Either a service name of a port number may be given. Please note
that numerical port numbers must be given as a string, too.
+=item B<Socket> I<Path>
+
+Connect to Redis using the UNIX domain socket at I<Path>. If this
+setting is given, the B<Hostname> and B<Port> settings are ignored.
+
=item B<Password> I<Password>
Use I<Password> to authenticate when connecting to I<Redis>.
=item B<Timeout> I<Milliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
-read function is blocking, you should keep this value as low as possible. Keep
-in mind that the sum of all B<Timeout> values for all B<Nodes> should be lower
-than B<Interval> defined globally.
+read function is blocking, you should keep this value as low as possible.
+It is expected what B<Timeout> values should be lower than B<Interval> defined
+globally.
+
+Defaults to 2000 (2 seconds).
+
+=item B<ReportCommandStats> B<false>|B<true>
+
+Enables or disables reporting of statistics based on the command type, including
+rate of command calls and average CPU time consumed by command processing.
+Defaults to B<false>.
+
+=item B<ReportCpuUsage> B<true>|B<false>
+
+Enables or disables reporting of CPU consumption statistics.
+Defaults to B<true>.
=item B<Query> I<Querystring>
The B<Query> block identifies a query to execute against the redis server.
-There may be an arbitrary number of queries to execute.
+There may be an arbitrary number of queries to execute. Each query should
+return single string or integer.
=item B<Type> I<Collectd type>
-Within a query definition, a valid collectd type to use as when submitting
+Within a query definition, a valid I<collectd type> to use as when submitting
the result of the query. When not supplied, will default to B<gauge>.
+Currently only types with one datasource are supported.
+See L<types.db(5)> for more details on types and their configuration.
+
=item B<Instance> I<Type instance>
Within a query definition, an optional type instance to use when submitting
the result of the query. When not supplied will default to the escaped
-command, up to 64 chars.
+command, up to 128 chars.
+
+=item B<Database> I<Index>
+
+This index selects the Redis logical database to use for query. Defaults
+to C<0>.
=back
When the C<rrdtool> plugin uses a cache (by setting B<CacheTimeout>, see below)
it writes all values for a certain RRD-file if the oldest value is older than
-(or equal to) the number of seconds specified. If some RRD-file is not updated
+(or equal to) the number of seconds specified by B<CacheTimeout>.
+That check happens on new values arriwal. If some RRD-file is not updated
anymore for some reason (the computer was shut down, the network is broken,
-etc.) some values may still be in the cache. If B<CacheFlush> is set, then the
-entire cache is searched for entries older than B<CacheTimeout> seconds and
-written to disk every I<Seconds> seconds. Since this is kind of expensive and
-does nothing under normal circumstances, this value should not be too small.
-900 seconds might be a good value, though setting this to 7200 seconds doesn't
-normally do much harm either.
+etc.) some values may still be in the cache. If B<CacheFlush> is set, then
+every I<Seconds> seconds the entire cache is searched for entries older than
+B<CacheTimeout> + B<RandomTimeout> seconds. The entries found are written to
+disk. Since scanning the entire cache is kind of expensive and does nothing
+under normal circumstances, this value should not be too small. 900 seconds
+might be a good value, though setting this to 7200 seconds doesn't normally
+do much harm either.
+
+Defaults to 10x B<CacheTimeout>.
+B<CacheFlush> must be larger than or equal to B<CacheTimeout>, otherwise the
+above default is used.
=item B<CacheTimeout> I<Seconds>
I<it8712-isa-0290/voltage-in1>" will cause collectd to gather data for the
voltage sensor I<in1> of the I<it8712> on the isa bus at the address 0290.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<sensors>-plugin will collect data from all
Disk "sdd"
Disk "/hda[34]/"
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Sets whether selected disks, i.E<nbsp>e. the ones matches by any of the B<Disk>
other plugins, its documentation has been moved to an own manpage,
L<collectd-snmp(5)>. Please see there for details.
+=head2 Plugin C<snmp_agent>
+
+The I<snmp_agent> plugin is an AgentX subagent that receives and handles queries
+from SNMP master agent and returns the data collected by read plugins.
+The I<snmp_agent> plugin handles requests only for OIDs specified in
+configuration file. To handle SNMP queries the plugin gets data from collectd
+and translates requested values from collectd's internal format to SNMP format.
+This plugin is a generic plugin and cannot work without configuration.
+For more details on AgentX subagent see
+<http://www.net-snmp.org/tutorial/tutorial-5/toolkit/demon/>
+
+B<Synopsis:>
+
+ <Plugin snmp_agent>
+ <Data "memAvailReal">
+ Plugin "memory"
+ #PluginInstance "some"
+ Type "memory"
+ TypeInstance "free"
+ OIDs "1.3.6.1.4.1.2021.4.6.0"
+ </Data>
+ <Table "ifTable">
+ IndexOID "IF-MIB::ifIndex"
+ SizeOID "IF-MIB::ifNumber"
+ <Data "ifDescr">
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
+ Plugin "interface"
+ OIDs "IF-MIB::ifDescr"
+ </Data>
+ <Data "ifOctets">
+ Plugin "interface"
+ Type "if_octets"
+ TypeInstance ""
+ OIDs "IF-MIB::ifInOctets" "IF-MIB::ifOutOctets"
+ </Data>
+ </Table>
+ <Table "CPUAffinityTable">
+ <Data "DomainName">
+ <IndexKey>
+ Source "PluginInstance"
+ </IndexKey>
+ Plugin "virt"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhAffinityDomainName"
+ </Data>
+ <Data "VCPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_([0-9]{1,3})-cpu_[0-9]{1,3}$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhVCPUIndex"
+ </Data>
+ <Data "CPU">
+ Plugin "virt"
+ <IndexKey>
+ Source "TypeInstance"
+ Regex "^vcpu_[0-9]{1,3}-cpu_([0-9]{1,3})$"
+ Group 1
+ </IndexKey>
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUIndex"
+ </Data>
+ <Data "CPUAffinity">
+ Plugin "virt"
+ Type "cpu_affinity"
+ OIDs "LIBVIRT-HYPERVISOR-MIB::lvhCPUAffinity"
+ </Data>
+ </Table>
+ </Plugin>
+
+There are two types of blocks that can be contained in the
+C<E<lt>PluginE<nbsp> snmp_agentE<gt>> block: B<Data> and B<Table>:
+
+=head3 B<Data> block
+
+The B<Data> block defines a list OIDs that are to be handled. This block can
+define scalar or table OIDs. If B<Data> block is defined inside of B<Table>
+block it reperesents table OIDs.
+The following options can be set:
+
+=over 4
+
+=item B<IndexKey> block
+
+B<IndexKey> block contains all data needed for proper index build of snmp table.
+In case more than
+one table B<Data> block has B<IndexKey> block present then multiple key index is
+built. If B<Data> block defines scalar data type B<IndexKey> has no effect and can
+be omitted.
+
+=over 8
+
+=item B<Source> I<String>
+
+B<Source> can be set to one of the following values: "Hostname", "Plugin",
+"PluginInstance", "Type", "TypeInstance". This value indicates which field of
+corresponding collectd metric is taken as a SNMP table index.
+
+=item B<Regex> I<String>
+
+B<Regex> option can also be used to parse strings or numbers out of
+specific field. For example: type-instance field which is "vcpu1-cpu2" can be
+parsed into two numeric fields CPU = 2 and VCPU = 1 and can be later used
+as a table index.
+
+=item B<Group> I<Number>
+
+B<Group> number can be specified in case groups are used in regex.
+
+=back
+
+=item B<Plugin> I<String>
+
+Read plugin name whose collected data will be mapped to specified OIDs.
+
+=item B<PluginInstance> I<String>
+
+Read plugin instance whose collected data will be mapped to specified OIDs.
+The field is optional and by default there is no plugin instance check.
+Allowed only if B<Data> block defines scalar data type.
+
+=item B<Type> I<String>
+
+Collectd's type that is to be used for specified OID, e.E<nbsp>g. "if_octets"
+for example. The types are read from the B<TypesDB> (see L<collectd.conf(5)>).
+
+=item B<TypeInstance> I<String>
+
+Collectd's type-instance that is to be used for specified OID.
+
+=item B<OIDs> I<OID> [I<OID> ...]
+
+Configures the OIDs to be handled by I<snmp_agent> plugin. Values for these OIDs
+are taken from collectd data type specified by B<Plugin>, B<PluginInstance>,
+B<Type>, B<TypeInstance> fields of this B<Data> block. Number of the OIDs
+configured should correspond to number of values in specified B<Type>.
+For example two OIDs "IF-MIB::ifInOctets" "IF-MIB::ifOutOctets" can be mapped to
+"rx" and "tx" values of "if_octets" type.
+
+=item B<Scale> I<Value>
+
+The values taken from collectd are multiplied by I<Value>. The field is optional
+and the default is B<1.0>.
+
+=item B<Shift> I<Value>
+
+I<Value> is added to values from collectd after they have been multiplied by
+B<Scale> value. The field is optional and the default value is B<0.0>.
+
+=back
+
+=head3 The B<Table> block
+
+The B<Table> block defines a collection of B<Data> blocks that belong to one
+snmp table. In addition to multiple B<Data> blocks the following options can be
+set:
+
+=over 4
+
+=item B<IndexOID> I<OID>
+
+OID that is handled by the plugin and is mapped to numerical index value that is
+generated by the plugin for each table record.
+
+=item B<SizeOID> I<OID>
+
+OID that is handled by the plugin. Returned value is the number of records in
+the table. The field is optional.
+
+=back
+
=head2 Plugin C<statsd>
The I<statsd plugin> listens to a UDP socket, reads "events" in the statsd
an interval. If set to B<False>, the default, these values aren't calculated /
dispatched.
+Please note what reported timer values less than 0.001 are ignored in all B<Timer*> reports.
+
=back
=head2 Plugin C<swap>
This is useful for deploying I<collectd> in a heterogeneous environment, where
swap sizes differ and you want to specify generic thresholds or similar.
+=item B<ReportIO> B<true>|B<false>
+
+Enables or disables reporting swap IO. Defaults to B<true>.
+
+This is useful for the cases when swap IO is not neccessary, is not available,
+or is not reliable.
+
=back
=head2 Plugin C<syslog>
<Plugin table>
<Table "/proc/slabinfo">
+ #Plugin "slab"
Instance "slabinfo"
Separator " "
<Result>
=over 4
+=item B<Plugin> I<Plugin>
+
+If specified, I<Plugin> is used as the plugin name when submitting values.
+Defaults to B<table>.
+
=item B<Instance> I<instance>
-If specified, I<instance> is used as the plugin instance. So, in the above
-example, the plugin name C<table-slabinfo> would be used. If omitted, the
+If specified, I<instance> is used as the plugin instance. If omitted, the
filename of the table is used instead, with all special characters replaced
with an underscore (C<_>).
<Plugin "tail">
<File "/var/log/exim4/mainlog">
+ Plugin "mail"
Instance "exim"
Interval 60
<Match>
<DSType "Distribution">
Percentile 99
Bucket 0 100
+ #BucketType "bucket"
</DSType>
Type "latency"
Instance "foo"
logfile to parse. Within each B<File> block, there are one or more B<Match>
blocks, which configure a regular expression to search for.
-The B<Instance> option in the B<File> block may be used to set the plugin
-instance. So in the above example the plugin name C<tail-foo> would be used.
-This plugin instance is for all B<Match> blocks that B<follow> it, until the
-next B<Instance> option. This way you can extract several plugin instances from
-one logfile, handy when parsing syslog and the like.
+The B<Plugin> and B<Instance> options in the B<File> block may be used to set
+the plugin name and instance respectively. So in the above example the plugin name
+C<mail-exim> would be used.
+
+These options are applied for all B<Match> blocks that B<follow> it, until the
+next B<Plugin> or B<Instance> option. This way you can extract several plugin
+instances from one logfile, handy when parsing syslog and the like.
The B<Interval> option allows you to define the length of time between reads. If
this is not set, the default Interval will be used.
=item B<GaugeAverage>
-Calculate the average.
+Calculate the average of all values matched during the interval.
=item B<GaugeMin>
-Use the smallest number only.
+Report the smallest value matched during the interval.
=item B<GaugeMax>
-Use the greatest number only.
+Report the greatest value matched during the interval.
=item B<GaugeLast>
-Use the last number found.
+Report the last value matched during the interval.
=item B<GaugePersist>
-Use the last number found. The number is not reset at the end of an interval.
-It is continously reported until another number is matched. This is intended
-for cases in which only state changes are reported, for example a thermometer
-that only reports the temperature when it changes.
+Report the last matching value. The metric is I<not> reset to C<NaN> at the end
+of an interval. It is continuously reported until another value is matched.
+This is intended for cases in which only state changes are reported, for
+example a thermometer that only reports the temperature when it changes.
=item B<CounterSet>
not use the matched subexpression, but simply count the number of matched
lines. Thus, you may use a regular expression without submatch in this case.
+B<GaugeInc> is reset to I<zero> after every read, unlike other B<Gauge*>
+metrics which are reset to C<NaN>.
+
=item B<Distribution>
Type to do calculations based on the distribution of values, primarily
<DSType "Distribution">
Percentile 99
Bucket 0 100
+ BucketType "bucket"
</DSType>
=over 4
Bucket 20 50
Bucket 50 0
-Metrics are reported with the I<type> C<bucket> and the I<type instance>
+Metrics are reported with the I<type> set by B<BucketType> option (C<bucket>
+by default) and the I<type instance>
C<E<lt>TypeE<gt>[-E<lt>InstanceE<gt>]-E<lt>lower_boundE<gt>_E<lt>upper_boundE<gt>>.
This option may be repeated to calculate more than one rate.
+=item B<BucketType> I<Type>
+
+Sets the type used to dispatch B<Bucket> metrics.
+Optional, by default C<bucket> will be used.
+
=back
=back
point number, using L<strtod(3)>. The B<Counter*> and B<AbsoluteSet> types
interpret the submatch as an unsigned integer using L<strtoull(3)>. The
B<Derive*> types interpret the submatch as a signed integer using
-L<strtoll(3)>. B<CounterInc> and B<DeriveInc> do not use the submatch at all
-and it may be omitted in this case.
+L<strtoll(3)>. B<CounterInc>, B<DeriveInc> and B<GaugeInc> do not use the
+submatch at all and it may be omitted in this case.
+
+The B<Gauge*> types, unless noted otherwise, are reset to C<NaN> after being
+reported. In other words, B<GaugeAverage> reports the average of all values
+matched since the last metric was reported (or C<NaN> if there was no match).
=item B<Type> I<Type>
<Metric "snort-dropped">
Type "percent"
Instance "dropped"
- Index 1
+ ValueFrom 1
</Metric>
<File "/var/log/snort/snort.stats">
- Instance "snort-eth0"
+ Plugin "snortstats"
+ Instance "eth0"
Interval 600
Collect "snort-dropped"
+ #TimeFrom 0
</File>
</Plugin>
=over 4
+=item B<Plugin> I<Plugin>
+
+Use I<Plugin> as the plugin name when submitting values.
+Defaults to C<tail_csv>.
+
=item B<Instance> I<PluginInstance>
Sets the I<plugin instance> used when dispatching the values.
depending on the value of the B<IgnoreSelected> option. This option may be
used multiple times to specify a list of devices.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
Invert the selection: If set to true, all devices B<except> the ones that
Boolean enabling the use of logical core numbering for per core statistics.
When enabled, C<cpuE<lt>nE<gt>> is used as plugin instance, where I<n> is a
-sequential number assigned by the kernel. Otherwise, C<coreE<lt>nE<gt>> is used
-where I<n> is the n-th core of the socket, causing name conflicts when there is
-more than one socket.
+dynamic number assigned by the kernel. Otherwise, C<coreE<lt>nE<gt>> is used
+if there is only one package and C<pkgE<lt>nE<gt>-coreE<lt>mE<gt>> if there is
+more than one, where I<n> is the n-th core of package I<m>.
+
+=item B<RestoreAffinityPolicy> I<AllCPUs>|I<Restore>
+
+Reading data from CPU has side-effect: collectd process's CPU affinity mask
+changes. After reading data is completed, affinity mask needs to be restored.
+This option allows to set restore policy.
+
+B<AllCPUs> (the default): Restore the affinity by setting affinity to any/all
+CPUs.
+
+B<Restore>: Save affinity using sched_getaffinity() before reading data and
+restore it after.
+
+On some systems, sched_getaffinity() will fail due to inconsistency of the CPU
+set size between userspace and kernel. In these cases plugin will detect the
+unsuccessful call and fail with an error, preventing data collection.
+Most of configurations does not need to save affinity as Collectd process is
+allowed to run on any/all available CPUs.
+
+If you need to save and restore affinity and get errors like 'Unable to save
+the CPU affinity', setting 'possible_cpus' kernel boot option may also help.
+
+See following links for details:
+
+L<https://github.com/collectd/collectd/issues/1593>
+L<https://sourceware.org/bugzilla/show_bug.cgi?id=15630>
+L<https://bugzilla.kernel.org/show_bug.cgi?id=151821>
=back
CollectVCL false
CollectVSM false
CollectWorkers false
+ CollectLock false
+ CollectMempool false
+ CollectManagement false
+ CollectSMF false
+ CollectVBE false
+ CollectMSE false
</Instance>
</Plugin>
=item B<CollectSMA> B<true>|B<false>
malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
-component is Solaris specific. Only available with Varnish 2.x. False by
-default.
+component is Solaris specific. Note: SMA, SMF and MSE share counters, enable
+only the one used by the Varnish instance. Only available with Varnish 2.x.
+False by default.
=item B<CollectSMS> B<true>|B<false>
=item B<CollectSM> B<true>|B<false>
-file (memory mapped file) storage statistics. Only available with Varnish 2.x.
+file (memory mapped file) storage statistics. Only available with Varnish 2.x.,
+in varnish 4.x. use CollectSMF.
False by default.
=item B<CollectStruct> B<true>|B<false>
Collect statistics about worker threads. False by default.
+=item B<CollectVBE> B<true>|B<false>
+
+Backend counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectSMF> B<true>|B<false>
+
+file (memory mapped file) storage statistics. Only available with Varnish 4.x.
+Note: SMA, SMF and MSE share counters, enable only the one used by the Varnish
+instance. Used to be called SM in Varnish 2.x. False by default.
+
+=item B<CollectManagement> B<true>|B<false>
+
+Management process counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectLock> B<true>|B<false>
+
+Lock counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectMempool> B<true>|B<false>
+
+Memory pool counters. Only available with Varnish 4.x. False by default.
+
+=item B<CollectMSE> B<true>|B<false>
+
+Varnish Massive Storage Engine 2.0 (MSE2) is an improved storage backend for
+Varnish, replacing the traditional malloc and file storages. Only available
+with Varnish-Plus 4.x. Note: SMA, SMF and MSE share counters, enable only the
+one used by the Varnish instance. False by default.
+
=back
=head2 Plugin C<virt>
-This plugin allows CPU, disk and network load to be collected for virtualized
-guests on the machine. This means that these metrics can be collected for guest
-systems without installing any software on them - I<collectd> only runs on the
-host system. The statistics are collected through libvirt
-(L<http://libvirt.org/>).
+This plugin allows CPU, disk, network load and other metrics to be collected for
+virtualized guests on the machine. The statistics are collected through libvirt
+API (L<http://libvirt.org/>). Majority of metrics can be gathered without
+installing any additional software on guests, especially I<collectd>, which runs
+only on the host system.
Only I<Connection> is required.
+Consider the following example config:
+
+ <Plugin "virt">
+ Connection "qemu:///system"
+ HostnameFormat "hostname"
+ InterfaceFormat "address"
+ PluginInstanceFormat "name"
+ </Plugin>
+
+It will generate the following values:
+
+ node42.example.com/virt-instance-0006f26c/disk_octets-vda
+ node42.example.com/virt-instance-0006f26c/disk_ops-vda
+ node42.example.com/virt-instance-0006f26c/if_dropped-ca:fe:ca:fe:ca:fe
+ node42.example.com/virt-instance-0006f26c/if_errors-ca:fe:ca:fe:ca:fe
+ node42.example.com/virt-instance-0006f26c/if_octets-ca:fe:ca:fe:ca:fe
+ node42.example.com/virt-instance-0006f26c/if_packets-ca:fe:ca:fe:ca:fe
+ node42.example.com/virt-instance-0006f26c/memory-actual_balloon
+ node42.example.com/virt-instance-0006f26c/memory-available
+ node42.example.com/virt-instance-0006f26c/memory-last_update
+ node42.example.com/virt-instance-0006f26c/memory-major_fault
+ node42.example.com/virt-instance-0006f26c/memory-minor_fault
+ node42.example.com/virt-instance-0006f26c/memory-rss
+ node42.example.com/virt-instance-0006f26c/memory-swap_in
+ node42.example.com/virt-instance-0006f26c/memory-swap_out
+ node42.example.com/virt-instance-0006f26c/memory-total
+ node42.example.com/virt-instance-0006f26c/memory-unused
+ node42.example.com/virt-instance-0006f26c/memory-usable
+ node42.example.com/virt-instance-0006f26c/virt_cpu_total
+ node42.example.com/virt-instance-0006f26c/virt_vcpu-0
+
+You can get information on the metric's units from the online libvirt documentation.
+For instance, I<virt_cpu_total> is in nanoseconds.
+
=over 4
=item B<Connection> I<uri>
=item B<BlockDeviceFormat> B<target>|B<source>
If I<BlockDeviceFormat> is set to B<target>, the default, then the device name
-seen by the guest will be used for reporting metrics.
+seen by the guest will be used for reporting metrics.
This corresponds to the C<E<lt>targetE<gt>> node in the XML definition of the
domain.
Setting C<BlockDeviceFormatBasename true> will cause the I<type instance> to be
set to C<image1.qcow2>.
-=item B<HostnameFormat> B<name|uuid|hostname|...>
+=item B<HostnameFormat> B<name|uuid|hostname|metadata...>
When the virt plugin logs data, it sets the hostname of the collected data
according to this setting. The default is to use the guest name as provided by
same guest across migrations.
B<hostname> means to use the global B<Hostname> setting, which is probably not
-useful on its own because all guests will appear to have the same name.
+useful on its own because all guests will appear to have the same name. This is
+useful in conjunction with B<PluginInstanceFormat> though.
+
+B<metadata> means use information from guest's metadata. Use
+B<HostnameMetadataNS> and B<HostnameMetadataXPath> to localize this information.
You can also specify combinations of these fields. For example B<name uuid>
means to concatenate the guest name and UUID (with a literal colon character
characters. In case when combination of fields exceeds 62 characters,
hostname will be truncated without a warning.
-=item B<InterfaceFormat> B<name>|B<address>
+=item B<InterfaceFormat> B<name>|B<address>|B<number>
When the virt plugin logs interface data, it sets the name of the collected
data according to this setting. The default is to use the path as provided by
B<address> means use the interface's mac address. This is useful since the
interface path might change between reboots of a guest or across migrations.
-=item B<PluginInstanceFormat> B<name|uuid|none>
+B<number> means use the interface's number in guest.
+
+=item B<PluginInstanceFormat> B<name|uuid|metadata|none>
When the virt plugin logs data, it sets the plugin_instance of the collected
data according to this setting. The default is to not set the plugin_instance.
B<name> means use the guest's name as provided by the hypervisor.
B<uuid> means use the guest's UUID.
+B<metadata> means use information from guest's metadata.
You can also specify combinations of the B<name> and B<uuid> fields.
For example B<name uuid> means to concatenate the guest name and UUID
(with a literal colon character between, thus I<"foo:1234-1234-1234-1234">).
-=item B<Instances> B<integer>
+=item B<HostnameMetadataNS> B<string>
-How many read instances you want to use for this plugin. The default is one,
-and the sensible setting is a multiple of the B<ReadThreads> value.
-If you are not sure, just use the default setting.
+When B<metadata> is used in B<HostnameFormat> or B<PluginInstanceFormat>, this
+selects in which metadata namespace we will pick the hostname. The default is
+I<http://openstack.org/xmlns/libvirt/nova/1.0>.
+
+=item B<HostnameMetadataXPath> B<string>
+
+When B<metadata> is used in B<HostnameFormat> or B<PluginInstanceFormat>, this
+describes where the hostname is located in the libvirt metadata. The default is
+I</instance/name/text()>.
+
+=item B<ReportBlockDevices> B<true>|B<false>
+
+Enabled by default. Allows to disable stats reporting of block devices for
+whole plugin.
+
+=item B<ReportNetworkInterfaces> B<true>|B<false>
+
+Enabled by default. Allows to disable stats reporting of network interfaces for
+whole plugin.
=item B<ExtraStats> B<string>
the previous behaviour of the plugin. If unsure, leave the default. If enabled,
allows the plugin to reported more detailed statistics about the behaviour of
Virtual Machines. The argument is a space-separated list of selectors.
+
Currently supported selectors are:
-B<disk> report extra statistics like number of flush operations and total
-service time for read, write and flush operations.
-B<pcpu> report the physical user/system cpu time consumed by the hypervisor, per-vm.
+
+=over 4
+
+=item B<cpu_util>: report CPU utilization per domain in percentage.
+
+=item B<disk>: report extra statistics like number of flush operations and total
+service time for read, write and flush operations. Requires libvirt API version
+I<0.9.5> or later.
+
+=item B<disk_err>: report disk errors if any occured. Requires libvirt API version
+I<0.9.10> or later.
+
+=item B<domain_state>: report domain state and reason in human-readable format as
+a notification. If libvirt API version I<0.9.2> or later is available, domain
+reason will be included in notification.
+
+=item B<fs_info>: report file system information as a notification. Requires
+libvirt API version I<1.2.11> or later. Can be collected only if I<Guest Agent>
+is installed and configured inside VM. Make sure that installed I<Guest Agent>
+version supports retrieving file system information.
+
+=item B<job_stats_background>: report statistics about progress of a background
+job on a domain. Only one type of job statistics can be collected at the same time.
+Requires libvirt API version I<1.2.9> or later.
+
+=item B<job_stats_completed>: report statistics about a recently completed job on
+a domain. Only one type of job statistics can be collected at the same time.
+Requires libvirt API version I<1.2.9> or later.
+
+=item B<pcpu>: report the physical user/system cpu time consumed by the hypervisor, per-vm.
+Requires libvirt API version I<0.9.11> or later.
+
+=item B<perf>: report performance monitoring events. To collect performance
+metrics they must be enabled for domain and supported by the platform. Requires
+libvirt API version I<1.3.3> or later.
+B<Note>: I<perf> metrics can't be collected if I<intel_rdt> plugin is enabled.
+
+=item B<vcpupin>: report pinning of domain VCPUs to host physical CPUs.
+
+=back
+
+=item B<PersistentNotification> B<true>|B<false>
+
+Override default configuration to only send notifications when there is a change
+in the lifecycle state of a domain. When set to true notifications will be sent
+for every read cycle. Default is false. Does not affect the stats being
+dispatched.
+
+=item B<Instances> B<integer>
+
+How many read instances you want to use for this plugin. The default is one,
+and the sensible setting is a multiple of the B<ReadThreads> value.
+
+This option is only useful when domains are specially tagged.
+If you are not sure, just use the default setting.
+
+The reader instance will only query the domains with attached matching tag.
+Tags should have the form of 'virt-X' where X is the reader instance number,
+starting from 0.
+
+The special-purpose reader instance #0, guaranteed to be always present,
+will query all the domains with missing or unrecognized tag, so no domain will
+ever be left out.
+
+Domain tagging is done with a custom attribute in the libvirt domain metadata
+section. Value is selected by an XPath I</domain/metadata/ovirtmap/tag/text()>
+expression in the I<http://ovirt.org/ovirtmap/tag/1.0> namespace.
+(XPath and namespace values are not configurable yet).
+
+Tagging could be used by management applications to evenly spread the
+load among the reader threads, or to pin on the same threads all
+the libvirt domains which use the same shared storage, to minimize
+the disruption in presence of storage outages.
=back
Protocol "tcp"
LogSendErrors true
Prefix "collectd"
+ UseTags false
</Node>
</Plugin>
=item B<Prefix> I<String>
-When set, I<String> is added in front of the host name. Dots and whitespace are
-I<not> escaped in this string (see B<EscapeCharacter> below).
+When B<UseTags> is I<false>, B<Prefix> value is added in front of the host name.
+When B<UseTags> is I<true>, B<Prefix> value is added in front of series name.
+
+Dots and whitespace are I<not> escaped in this string (see B<EscapeCharacter>
+below).
=item B<Postfix> I<String>
-When set, I<String> is appended to the host name. Dots and whitespace are
-I<not> escaped in this string (see B<EscapeCharacter> below).
+When B<UseTags> is I<false>, B<Postfix> value appended to the host name.
+When B<UseTags> is I<true>, B<Postgix> value appended to the end of series name
+(before the first ; that separates the name from the tags).
+
+Dots and whitespace are I<not> escaped in this string (see B<EscapeCharacter>
+below).
=item B<EscapeCharacter> I<Char>
default), the plugin and plugin instance (and likewise the type and type
instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+Option value is not used when B<UseTags> is I<true>.
+
=item B<AlwaysAppendDS> B<false>|B<true>
If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
I<EscapeCharacter>. Otherwise, if set to B<true>, the C<.> (dot) character
is preserved, i.e. passed through.
+Option value is not used when B<UseTags> is I<true>.
+
=item B<DropDuplicateFields> B<false>|B<true>
If set to B<true>, detect and remove duplicate components in Graphite metric
names. For example, the metric name C<host.load.load.shortterm> will
be shortened to C<host.load.shortterm>.
+=item B<UseTags> B<false>|B<true>
+
+If set to B<true>, Graphite metric names will be generated as tagged series.
+This allows for much more flexibility than the traditional hierarchical layout.
+
+Example:
+C<test.single;host=example.com;plugin=test;plugin_instance=foo;type=single;type_instance=bar>
+
+You can use B<Postfix> option to add more tags by specifying it like
+C<;tag1=value1;tag2=value2>. Note what tagging support was added since Graphite
+version 1.1.x.
+
+If set to B<true>, the B<SeparateInstances> and B<PreserveSeparator> settings
+are not used.
+
+Default value: B<false>.
+
=back
=head2 Plugin C<write_log>
=over 4
+=item B<Host> I<Host>
+
+Bind to the hostname / address I<Host>. By default, the plugin will bind to the
+"any" address, i.e. accept packets sent to any of the hosts addresses.
+
+This option is supported only for libmicrohttpd newer than 0.9.0.
+
=item B<Port> I<Port>
Port the embedded webserver should listen on. Defaults to B<9103>.
=item B<Attribute> I<String> I<String>
-Only available for KAIROSDB output format.
+Only available for the KAIROSDB output format.
Consider the two given strings to be the key and value of an additional tag for
each metric being sent out.
You can add multiple B<Attribute>.
+=item B<TTL> I<Int>
+
+Only available for the KAIROSDB output format.
+
+Sets the Cassandra ttl for the data points.
+
+Please refer to L<http://kairosdb.github.io/docs/build/html/restapi/AddDataPoints.html?highlight=ttl>
+
+=item B<Prefix> I<String>
+
+Only available for the KAIROSDB output format.
+
+Sets the metrics prefix I<string>. Defaults to I<collectd>.
+
=item B<Metrics> B<true>|B<false>
Controls whether I<metrics> are POSTed to this location. Defaults to B<true>.
=item B<GraphitePrefix> (B<Format>=I<Graphite> only)
A prefix can be added in the metric name when outputting in the I<Graphite>
-format. It's added before the I<Host> name.
+format.
+
+When B<GraphiteUseTags> is I<false>, prefix is added before the I<Host> name.
Metric name will be
C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+When B<GraphiteUseTags> is I<true>, prefix is added in front of series name.
+
=item B<GraphitePostfix> (B<Format>=I<Graphite> only)
A postfix can be added in the metric name when outputting in the I<Graphite>
-format. It's added after the I<Host> name.
+format.
+
+When B<GraphiteUseTags> is I<false>, postfix is added after the I<Host> name.
Metric name will be
C<E<lt>prefixE<gt>E<lt>hostE<gt>E<lt>postfixE<gt>E<lt>pluginE<gt>E<lt>typeE<gt>E<lt>nameE<gt>>
+When B<GraphiteUseTags> is I<true>, prefix value appended to the end of series
+name (before the first ; that separates the name from the tags).
+
=item B<GraphiteEscapeChar> (B<Format>=I<Graphite> only)
Specify a character to replace dots (.) in the host part of the metric name.
default), the plugin and plugin instance (and likewise the type and type
instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+Option value is not used when B<GraphiteUseTags> is I<true>.
+
=item B<GraphiteAlwaysAppendDS> B<true>|B<false>
If set to B<true>, append the name of the I<Data Source> (DS) to the "metric"
I<GraphiteEscapeChar>. Otherwise, if set to B<true>, the C<.> (dot) character
is preserved, i.e. passed through.
+Option value is not used when B<GraphiteUseTags> is I<true>.
+
+=item B<GraphiteUseTags> B<false>|B<true>
+
+If set to B<true> Graphite metric names will be generated as tagged series.
+
+Default value: B<false>.
+
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to
Prefix "collectd/"
Database 1
MaxSetSize -1
+ MaxSetDuration -1
StoreRates true
</Node>
</Plugin>
The B<MaxSetSize> option limits the number of items that the I<Sorted Sets> can
hold. Negative values for I<Items> sets no limit, which is the default behavior.
+=item B<MaxSetDuration> I<Seconds>
+
+The B<MaxSetDuration> option limits the duration of items that the
+I<Sorted Sets> can hold. Negative values for I<Items> sets no duration, which
+is the default behavior.
+
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to
=back
+=head2 Plugin C<write_stackdriver>
+
+The C<write_stackdriver> plugin writes metrics to the
+I<Google Stackdriver Monitoring> service.
+
+This plugin supports two authentication methods: When configured, credentials
+are read from the JSON credentials file specified with B<CredentialFile>.
+Alternatively, when running on
+I<Google Compute Engine> (GCE), an I<OAuth> token is retrieved from the
+I<metadata server> and used to authenticate to GCM.
+
+B<Synopsis:>
+
+ <Plugin write_stackdriver>
+ CredentialFile "/path/to/service_account.json"
+ <Resource "global">
+ Label "project_id" "monitored_project"
+ </Resource>
+ </Plugin>
+
+=over 4
+
+=item B<CredentialFile> I<file>
+
+Path to a JSON credentials file holding the credentials for a GCP service
+account.
+
+If B<CredentialFile> is not specified, the plugin uses I<Application Default
+Credentials>. That means which credentials are used depends on the environment:
+
+=over 4
+
+=item
+
+The environment variable C<GOOGLE_APPLICATION_CREDENTIALS> is checked. If this
+variable is specified it should point to a JSON file that defines the
+credentials.
+
+=item
+
+The path C<${HOME}/.config/gcloud/application_default_credentials.json> is
+checked. This where credentials used by the I<gcloud> command line utility are
+stored. You can use C<gcloud auth application-default login> to create these
+credentials.
+
+Please note that these credentials are often of your personal account, not a
+service account, and are therefore unfit to be used in a production
+environment.
+
+=item
+
+When running on GCE, the built-in service account associated with the virtual
+machine instance is used.
+See also the B<Email> option below.
+
+=back
+
+=item B<Project> I<Project>
+
+The I<Project ID> or the I<Project Number> of the I<Stackdriver Account>. The
+I<Project ID> is a string identifying the GCP project, which you can chose
+freely when creating a new project. The I<Project Number> is a 12-digit decimal
+number. You can look up both on the I<Developer Console>.
+
+This setting is optional. If not set, the project ID is read from the
+credentials file or determined from the GCE's metadata service.
+
+=item B<Email> I<Email> (GCE only)
+
+Choses the GCE I<Service Account> used for authentication.
+
+Each GCE instance has a C<default> I<Service Account> but may also be
+associated with additional I<Service Accounts>. This is often used to restrict
+the permissions of services running on the GCE instance to the required
+minimum. The I<write_stackdriver plugin> requires the
+C<https://www.googleapis.com/auth/monitoring> scope. When multiple I<Service
+Accounts> are available, this option selects which one is used by
+I<write_stackdriver plugin>.
+
+=item B<Resource> I<ResourceType>
+
+Configures the I<Monitored Resource> to use when storing metrics.
+More information on I<Monitored Resources> and I<Monitored Resource Types> are
+available at L<https://cloud.google.com/monitoring/api/resources>.
+
+This block takes one string argument, the I<ResourceType>. Inside the block are
+one or more B<Label> options which configure the resource labels.
+
+This block is optional. The default value depends on the runtime environment:
+on GCE, the C<gce_instance> resource type is used, otherwise the C<global>
+resource type ist used:
+
+=over 4
+
+=item
+
+B<On GCE>, defaults to the equivalent of this config:
+
+ <Resource "gce_instance">
+ Label "project_id" "<project_id>"
+ Label "instance_id" "<instance_id>"
+ Label "zone" "<zone>"
+ </Resource>
+
+The values for I<project_id>, I<instance_id> and I<zone> are read from the GCE
+metadata service.
+
+=item
+
+B<Elsewhere>, i.e. not on GCE, defaults to the equivalent of this config:
+
+ <Resource "global">
+ Label "project_id" "<Project>"
+ </Resource>
+
+Where I<Project> refers to the value of the B<Project> option or the project ID
+inferred from the B<CredentialFile>.
+
+=back
+
+=item B<Url> I<Url>
+
+URL of the I<Stackdriver Monitoring> API. Defaults to
+C<https://monitoring.googleapis.com/v3>.
+
+=back
+
=head2 Plugin C<xencpu>
This plugin collects metrics of hardware CPU load for machine running Xen
Target "write"
</Chain>
+=head1 IGNORELISTS
+
+B<Ignorelists> are a generic framework to either ignore some metrics or report
+specific metircs only. Plugins usually provide one or more options to specify
+the items (mounts points, devices, ...) and the boolean option
+C<IgnoreSelected>.
+
+=over 4
+
+=item B<Select> I<String>
+
+Selects the item I<String>. This option often has a plugin specific name, e.g.
+B<Sensor> in the C<sensors> plugin. It is also plugin specific what this string
+is compared to. For example, the C<df> plugin's B<MountPoint> compares it to a
+mount point and the C<sensors> plugin's B<Sensor> compares it to a sensor name.
+
+By default, this option is doing a case-sensitive full-string match. The
+following config will match C<foo>, but not C<Foo>:
+
+ Select "foo"
+
+If I<String> starts and ends with C</> (a slash), the string is compiled as a
+I<regular expression>. For example, so match all item starting with C<foo>, use
+could use the following syntax:
+
+ Select "/^foo/"
+
+The regular expression is I<not> anchored, i.e. the following config will match
+C<foobar>, C<barfoo> and C<AfooZ>:
+
+ Select "/foo/"
+
+The B<Select> option may be repeated to select multiple items.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+If set to B<true>, matching metrics are I<ignored> and all other metrics are
+collected. If set to B<false>, matching metrics are I<collected> and all other
+metrics are ignored.
+
+=back
+
=head1 SEE ALSO
L<collectd(1)>,
projects / collectd.git / blobdiff