=head1 SYNOPSIS
- BaseDir "/path/to/data/"
- PIDFile "/path/to/pidfile/collectd.pid"
- Server "123.123.123.123" 12345
+ BaseDir "/var/lib/collectd"
+ PIDFile "/run/collectd.pid"
+ Interval 10.0
LoadPlugin cpu
LoadPlugin load
<LoadPlugin df>
Interval 3600
</LoadPlugin>
+ <Plugin df>
+ ValuesPercentage true
+ </Plugin>
LoadPlugin ping
<Plugin ping>
This config file controls how the system statistics collection daemon
B<collectd> behaves. The most significant option is B<LoadPlugin>, which
controls which plugins to load. These plugins ultimately define collectd's
-behavior.
+behavior. If the B<AutoLoadPlugin> option has been enabled, the explicit
+B<LoadPlugin> lines may be omitted for all plugins with a configuration block,
+i.e. a C<E<lt>PluginE<nbsp>...E<gt>> block.
The syntax of this config file is similar to the config file of the famous
I<Apache> webserver. Each line contains either an option (a key and a list of
The configuration is read and processed in order, i.e. from top to bottom. So
the plugins are loaded in the order listed in this config file. It is a good
idea to load any logging plugins first in order to catch messages from plugins
-during configuration. Also, the C<LoadPlugin> option B<must> occur B<before>
-the appropriate C<E<lt>Plugin ...E<gt>> block.
+during configuration. Also, unless B<AutoLoadPlugin> is enabled, the
+B<LoadPlugin> option I<must> occur I<before> the appropriate
+C<E<lt>B<Plugin> ...E<gt>> block.
=head1 GLOBAL OPTIONS
=item B<LoadPlugin> I<Plugin>
-Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
-will be mostly useless.
+Loads the plugin I<Plugin>. This is required to load plugins, unless the
+B<AutoLoadPlugin> option is enabled (see below). Without any loaded plugins,
+I<collectd> will be mostly useless.
-Starting with collectd 4.9, this may also be a block in which further options
-affecting the behavior of B<LoadPlugin> may be specified. The following
-options are allowed inside a B<LoadPlugin> block:
+Only the first B<LoadPlugin> statement or block for a given plugin name has any
+effect. This is useful when you want to split up the configuration into smaller
+files and want each file to be "self contained", i.e. it contains a B<Plugin>
+block I<and> then appropriate B<LoadPlugin> statement. The downside is that if
+you have multiple conflicting B<LoadPlugin> blocks, e.g. when they specify
+different intervals, only one of them (the first one encountered) will take
+effect and all others will be silently ignored.
- <LoadPlugin perl>
- Interval 10
- </LoadPlugin>
+B<LoadPlugin> may either be a simple configuration I<statement> or a I<block>
+with additional options, affecting the behavior of B<LoadPlugin>. A simple
+statement looks like this:
+
+ LoadPlugin "cpu"
+
+Options inside a B<LoadPlugin> block can override default settings and
+influence the way plugins are loaded, e.g.:
+
+ <LoadPlugin perl>
+ Interval 60
+ </LoadPlugin>
+
+The following options are valid inside B<LoadPlugin> blocks:
=over 4
=back
-=item B<Include> I<Path>
+=item B<AutoLoadPlugin> B<false>|B<true>
+
+When set to B<false> (the default), each plugin needs to be loaded explicitly,
+using the B<LoadPlugin> statement documented above. If a
+B<E<lt>PluginE<nbsp>...E<gt>> block is encountered and no configuration
+handling callback for this plugin has been registered, a warning is logged and
+the block is ignored.
+
+When set to B<true>, explicit B<LoadPlugin> statements are not required. Each
+B<E<lt>PluginE<nbsp>...E<gt>> block acts as if it was immediately preceded by a
+B<LoadPlugin> statement. B<LoadPlugin> statements are still required for
+plugins that don't provide any configuration, e.g. the I<Load plugin>.
+
+=item B<Include> I<Path> [I<pattern>]
If I<Path> points to a file, includes that file. If I<Path> points to a
directory, recursively includes all files within that directory and its
in combination with recursively including a directory to easily be able to
arbitrarily mix configuration files and other documents (e.g. README files).
The given example is similar to the first example above but includes all files
-matching C<*.conf> in any subdirectory of C</etc/collectd.d>:
-
- Include "/etc/collectd.d" "*.conf"
+matching C<*.conf> in any subdirectory of C</etc/collectd.d>.
=back
default value is B<5>, but you may want to increase this if you have more than
five plugins that may take relatively long to write to.
+=item B<WriteQueueLimitHigh> I<HighNum>
+
+=item B<WriteQueueLimitLow> I<LowNum>
+
+Metrics are read by the I<read threads> and then put into a queue to be handled
+by the I<write threads>. If one of the I<write plugins> is slow (e.g. network
+timeouts, I/O saturation of the disk) this queue will grow. In order to avoid
+running into memory issues in such a case, you can limit the size of this
+queue.
+
+By default, there is no limit and memory may grow indefinitely. This is most
+likely not an issue for clients, i.e. instances that only handle the local
+metrics. For servers it is recommended to set this to a non-zero value, though.
+
+You can set the limits using B<WriteQueueLimitHigh> and B<WriteQueueLimitLow>.
+Each of them takes a numerical argument which is the number of metrics in the
+queue. If there are I<HighNum> metrics in the queue, any new metrics I<will> be
+dropped. If there are less than I<LowNum> metrics in the queue, all new metrics
+I<will> be enqueued. If the number of metrics currently in the queue is between
+I<LowNum> and I<HighNum>, the metric is dropped with a probability that is
+proportional to the number of metrics in the queue (i.e. it increases linearly
+until it reaches 100%.)
+
+If B<WriteQueueLimitHigh> is set to non-zero and B<WriteQueueLimitLow> is
+unset, the latter will default to half of B<WriteQueueLimitHigh>.
+
+If you do not want to randomly drop values when the queue size is between
+I<LowNum> and I<HighNum>, set If B<WriteQueueLimitHigh> and
+B<WriteQueueLimitLow> to same value.
+
=item B<Hostname> I<Name>
Sets the hostname that identifies a host. If you omit this setting, the
=over 4
-=item
+=item *
The I<Type> cannot be left unspecified, because it is not reasonable to add
apples to oranges. Also, the internal lookup structure won't work if you try
to group by type.
-=item
+=item *
There must be at least one unspecified, ungrouped field. Otherwise nothing
will be aggregated.
=over 4
-=item
+=item *
foo.example.com/cpu-even-average/cpu-idle
-=item
+=item *
foo.example.com/cpu-even-average/cpu-system
-=item
+=item *
foo.example.com/cpu-even-average/cpu-user
-=item
+=item *
...
=head2 Plugin C<amqp>
-The I<AMQMP plugin> can be used to communicate with other instances of
+The I<AMQP plugin> can be used to communicate with other instances of
I<collectd> or third party applications using an AMQP message broker. Values
are sent to or received from the broker, which handles routing, queueing and
possibly filtering or messages.
# GraphiteSeparateInstances false
# GraphiteAlwaysAppendDS false
</Publish>
-
+
# Receive values from an AMQP broker
<Subscribe "some_name">
Host "localhost"
=back
+=head2 Plugin C<aquaero>
+
+This plugin collects the value of the available sensors in an
+I<AquaeroE<nbsp>5> board. AquaeroE<nbsp>5 is a water-cooling controller board,
+manufactured by Aqua Computer GmbH L<http://www.aquacomputer.de/>, with a USB2
+connection for monitoring and configuration. The board can handle multiple
+temperature sensors, fans, water pumps and water level sensors and adjust the
+output settings such as fan voltage or power used by the water pump based on
+the available inputs using a configurable controller included in the board.
+This plugin collects all the available inputs as well as some of the output
+values chosen by this controller. The plugin is based on the I<libaquaero5>
+library provided by I<aquatools-ng>.
+
+=over 4
+
+=item B<Device> I<DevicePath>
+
+Device path of the AquaeroE<nbsp>5's USB HID (human interface device), usually
+in the form C</dev/usb/hiddevX>. If this option is no set the plugin will try
+to auto-detect the Aquaero 5 USB device based on vendor-ID and product-ID.
+
+=back
+
=head2 Plugin C<ascent>
This plugin collects information about an Ascent server, a free server for the
=back
+=head2 Plugin C<cgroups>
+
+This plugin collects the CPU user/system time for each I<cgroup> by reading the
+F<cpuacct.stat> files in the first cpuacct-mountpoint (typically
+F</sys/fs/cgroup/cpu.cpuacct> on machines using systemd).
+
+=over 4
+
+=item B<CGroup> I<Directory>
+
+Select I<cgroup> based on the name. Whether only matching I<cgroups> are
+collected or if they are ignored is controlled by the B<IgnoreSelected> option;
+see below.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Invert the selection: If set to true, all cgroups I<except> the ones that
+match any one of the criteria are collected. By default only selected
+cgroups are collected if a selection is made. If no selection is configured
+at all, B<all> cgroups are selected.
+
+=back
+
=head2 Plugin C<cpufreq>
This plugin doesn't have any options. It reads
=head2 Plugin C<curl_json>
-The B<curl_json plugin> uses B<libcurl> (L<http://curl.haxx.se/>) and
-B<libyajl> (L<http://www.lloydforge.org/projects/yajl/>) to retrieve JSON data
-via cURL. This can be used to collect values from CouchDB documents (which are
-stored JSON notation), for example.
+The B<curl_json plugin> collects values from JSON data to be parsed by
+B<libyajl> (L<https://lloyd.github.io/yajl/>) retrieved via
+either B<libcurl> (L<http://curl.haxx.se/>) or read directly from a
+unix socket. The former can be used, for example, to collect values
+from CouchDB documents (which are stored JSON notation), and the
+latter to collect values from a uWSGI stats socket.
-The following example will collect several values from the built-in `_stats'
-runtime statistics module of CouchDB
+The following example will collect several values from the built-in
+C<_stats> runtime statistics module of I<CouchDB>
(L<http://wiki.apache.org/couchdb/Runtime_Statistics>).
<Plugin curl_json>
</URL>
</Plugin>
-In the B<Plugin> block, there may be one or more B<URL> blocks, each defining
-a URL to be fetched via HTTP (using libcurl) and one or more B<Key> blocks.
-The B<Key> string argument must be in a path format, which is used to collect a
-value from a JSON map object. If a path element of B<Key> is the
-I<*>E<nbsp>wildcard, the values for all keys will be collectd.
+This example will collect data directly from a I<uWSGI> "Stats Server" socket.
+
+ <Plugin curl_json>
+ <Sock "/var/run/uwsgi.stats.sock">
+ Instance "uwsgi"
+ <Key "workers/*/requests">
+ Type "http_requests"
+ </Key>
+
+ <Key "workers/*/apps/*/requests">
+ Type "http_requests"
+ </Key>
+ </Sock>
+ </Plugin>
+
+In the B<Plugin> block, there may be one or more B<URL> blocks, each
+defining a URL to be fetched via HTTP (using libcurl) or B<Sock>
+blocks defining a unix socket to read JSON from directly. Each of
+these blocks may have one or more B<Key> blocks.
+
+The B<Key> string argument must be in a path format. Each component is
+used to match the key from a JSON map or the index of an JSON
+array. If a path component of a B<Key> is a I<*>E<nbsp>wildcard, the
+values for all map keys or array indices will be collectd.
The following options are valid within B<URL> blocks:
Sets the plugin instance to I<Instance>.
=item B<User> I<Name>
+
=item B<Password> I<Password>
+
=item B<VerifyPeer> B<true>|B<false>
+
=item B<VerifyHost> B<true>|B<false>
+
=item B<CACert> I<file>
+
=item B<Header> I<Header>
+
=item B<Post> I<Body>
These options behave exactly equivalent to the appropriate options of the
many small files are stored on the disk. This is a usual scenario for mail
transfer agents and web caches.
+=item B<ValuesAbsolute> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in 1K-blocks.
+Defaults to true.
+
+=item B<ValuesPercentage> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in percentage.
+Defaults to false.
+
+This is useful for deploying collectd on the cloud, where machines with
+different disk size may exist. Then it is more practical to configure thresholds
+based on relative disk size.
+
=back
=head2 Plugin C<disk>
=item B<IgnoreSelected> I<true>|I<false>
-If no configuration if given, the B<traffic>-plugin will collect data from
+If no configuration if given, the B<interface>-plugin will collect data from
all interfaces. This may not be practical, especially for loopback- and
similar interfaces. Thus, you can use the B<Interface>-option to pick the
interfaces you're interested in. Sometimes, however, it's easier/preferred
B<Interface> is inverted: All selected interfaces are ignored and all
other interfaces are collected.
+It is possible to use regular expressions to match interface names, if the
+name is surrounded by I</.../> and collectd was compiled with support for
+regexps. This is useful if there's a need to collect (or ignore) data
+for a group of interfaces that are similarly named, without the need to
+explicitly list all of them (especially useful if the list is dynamic).
+Example:
+
+ Interface "lo"
+ Interface "/^veth/"
+ Interface "/^tun[0-9]+/"
+ IgnoreSelected "true"
+
+This will ignore the loopback interface, all interfaces with names starting
+with I<veth> and all interfaces with names starting with I<tun> followed by
+at least one digit.
+
+
=back
=head2 Plugin C<ipmi>
=item B<Chain> I<Table> I<Chain> [I<Comment|Number> [I<Name>]]
-Select the rules to count. If only I<Table> and I<Chain> are given, this plugin
-will collect the counters of all rules which have a comment-match. The comment
-is then used as type-instance.
+=item B<Chain6> I<Table> I<Chain> [I<Comment|Number> [I<Name>]]
+
+Select the iptables/ip6tables filter rules to count packets and bytes from.
+
+If only I<Table> and I<Chain> are given, this plugin will collect the counters
+of all rules which have a comment-match. The comment is then used as
+type-instance.
If I<Comment> or I<Number> is given, only the rule with the matching comment or
the I<n>th rule will be collected. Again, the comment (or the number) will be
=head2 Plugin C<memcached>
-The C<memcached plugin> connects to a memcached server and queries statistics
+The B<memcached plugin> connects to a memcached server and queries statistics
about cache utilization, memory and bandwidth used.
L<http://www.danga.com/memcached/>
=back
+=head2 Plugin C<mic>
+
+The B<mic plugin> gathers CPU statistics, memory usage and temperatures from
+Intel's Many Integrated Core (MIC) systems.
+
+B<Synopsis:>
+
+ <Plugin mic>
+ ShowCPU true
+ ShowCPUCores true
+ ShowMemory true
+
+ ShowTemperatures true
+ Temperature vddg
+ Temperature vddq
+ IgnoreSelectedTemperature true
+
+ ShowPower true
+ Power total0
+ Power total1
+ IgnoreSelectedPower true
+ </Plugin>
+
+The following options are valid inside the B<PluginE<nbsp>mic> block:
+
+=over 4
+
+=item B<ShowCPU> B<true>|B<false>
+
+If enabled (the default) a sum of the CPU usage accross all cores is reported.
+
+=item B<ShowCPUCores> B<true>|B<false>
+
+If enabled (the default) per-core CPU usage is reported.
+
+=item B<ShowMemory> B<true>|B<false>
+
+If enabled (the default) the physical memory usage of the MIC system is
+reported.
+
+=item B<ShowTemperatures> B<true>|B<false>
+
+If enabled (the default) various temperatures of the MIC system are reported.
+
+=item B<Temperature> I<Name>
+
+This option controls which temperatures are being reported. Whether matching
+temperatures are being ignored or I<only> matching temperatures are reported
+depends on the B<IgnoreSelectedTemperature> setting below. By default I<all>
+temperatures are reported.
+
+=item B<IgnoreSelectedTemperature> B<false>|B<true>
+
+Controls the behavior of the B<Temperature> setting above. If set to B<false>
+(the default) only temperatures matching a B<Temperature> option are reported
+or, if no B<Temperature> option is specified, all temperatures are reported. If
+set to B<true>, matching temperatures are I<ignored> and all other temperatures
+are reported.
+
+Known temperature names are:
+
+=over 4
+
+=item die
+
+Die of the CPU
+
+=item devmem
+
+Device Memory
+
+=item fin
+
+Fan In
+
+=item fout
+
+Fan Out
+
+=item vccp
+
+Voltage ccp
+
+=item vddg
+
+Voltage ddg
+
+=item vddq
+
+Voltage ddq
+
+=back
+
+=item B<ShowPower> B<true>|B<false>
+
+If enabled (the default) various temperatures of the MIC system are reported.
+
+=item B<Power> I<Name>
+
+This option controls which power readings are being reported. Whether matching
+power readings are being ignored or I<only> matching power readings are reported
+depends on the B<IgnoreSelectedPower> setting below. By default I<all>
+power readings are reported.
+
+=item B<IgnoreSelectedPower> B<false>|B<true>
+
+Controls the behavior of the B<Power> setting above. If set to B<false>
+(the default) only power readings matching a B<Power> option are reported
+or, if no B<Power> option is specified, all power readings are reported. If
+set to B<true>, matching power readings are I<ignored> and all other power readings
+are reported.
+
+Known power names are:
+
+=over 4
+
+=item total0
+
+Total power utilization averaged over Time Window 0 (uWatts).
+
+=item total1
+
+Total power utilization averaged over Time Window 0 (uWatts).
+
+=item inst
+
+Instantaneous power (uWatts).
+
+=item imax
+
+Max instantaneous power (uWatts).
+
+=item pcie
+
+PCI-E connector power (uWatts).
+
+=item c2x3
+
+2x3 connector power (uWatts).
+
+=item c2x4
+
+2x4 connector power (uWatts).
+
+=item vccp
+
+Core rail (uVolts).
+
+=item vddg
+
+Uncore rail (uVolts).
+
+=item vddq
+
+Memory subsystem rail (uVolts).
+
+=back
+
+=back
+
=head2 Plugin C<modbus>
The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
values), large integer values (unsigned 32E<nbsp>bit values) and floating point
values (two registers interpreted as IEEE floats in big endian notation).
-Synopsis:
+B<Synopsis:>
<Data "voltage-input-1">
RegisterBase 0
=head2 Plugin C<ntpd>
+The C<ntpd> plugin collects per-peer ntp data such as time offset and time
+dispersion.
+
+For talking to B<ntpd>, it mimics what the B<ntpdc> control program does on
+the wire - using B<mode 7> specific requests. This mode is deprecated with
+newer B<ntpd> releases (4.2.7p230 and later). For the C<ntpd> plugin to work
+correctly with them, the ntp daemon must be explicitly configured to
+enable B<mode 7> (which is disabled by default). Refer to the I<ntp.conf(5)>
+manual page for details.
+
+Available configuration options for the C<ntpd> plugin:
+
=over 4
=item B<Host> I<Hostname>
amount of time will be lost, for example, if a single statement within the
transaction fails or if the database server crashes.
+=item B<Instance> I<name>
+
+Specify the plugin instance name that should be used instead of the database
+name (which is the default, if this option has not been specified). This
+allows to query multiple databases of the same name on the same host (e.g.
+when running multiple database server versions in parallel).
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
Specify whether to use an SSL connection when contacting the server. The
following modes are supported:
-=item B<Instance> I<name>
-
-Specify the plugin instance name that should be used instead of the database
-name (which is the default, if this option has not been specified). This
-allows to query multiple databases of the same name on the same host (e.g.
-when running multiple database server versions in parallel).
-
=over 4
=item I<disable>
(RSS), user- and system-time used, number of processes and number of threads,
io data (where available) and minor and major pagefaults.
+Some platforms have a limit on the length of process names. I<Name> must stay
+below this limit.
+
=item B<ProcessMatch> I<name> I<regex>
Similar to the B<Process> option this allows to select more detailed
Use I<Password> to authenticate when connecting to I<Redis>.
-=item B<Timeout> I<Timeout in miliseconds>
+=item B<Timeout> I<Milliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
read function is blocking, you should keep this value as low as possible. Keep
=back
+=head2 Plugin C<sigrok>
+
+The I<sigrok plugin> uses I<libsigrok> to retrieve measurements from any device
+supported by the L<sigrok|http://sigrok.org/> project.
+
+B<Synopsis>
+
+ <Plugin sigrok>
+ LogLevel 3
+ <Device "AC Voltage">
+ Driver "fluke-dmm"
+ MinimumInterval 10
+ Conn "/dev/ttyUSB2"
+ </Device>
+ <Device "Sound Level">
+ Driver "cem-dt-885x"
+ Conn "/dev/ttyUSB1"
+ </Device>
+ </Plugin>
+
+=over 4
+
+=item B<LogLevel> B<0-5>
+
+The I<sigrok> logging level to pass on to the I<collectd> log, as a number
+between B<0> and B<5> (inclusive). These levels correspond to C<None>,
+C<Errors>, C<Warnings>, C<Informational>, C<Debug >and C<Spew>, respectively.
+The default is B<2> (C<Warnings>). The I<sigrok> log messages, regardless of
+their level, are always submitted to I<collectd> at its INFO log level.
+
+=item E<lt>B<Device> I<Name>E<gt>
+
+A sigrok-supported device, uniquely identified by this section's options. The
+I<Name> is passed to I<collectd> as the I<plugin instance>.
+
+=item B<Driver> I<DriverName>
+
+The sigrok driver to use for this device.
+
+=item B<Conn> I<ConnectionSpec>
+
+If the device cannot be auto-discovered, or more than one might be discovered
+by the driver, I<ConnectionSpec> specifies the connection string to the device.
+It can be of the form of a device path (e.g.E<nbsp>C</dev/ttyUSB2>), or, in
+case of a non-serial USB-connected device, the USB I<VendorID>B<.>I<ProductID>
+separated by a period (e.g.E<nbsp>C<0403.6001>). A USB device can also be
+specified as I<Bus>B<.>I<Address> (e.g.E<nbsp>C<1.41>).
+
+=item B<SerialComm> I<SerialSpec>
+
+For serial devices with non-standard port settings, this option can be used
+to specify them in a form understood by I<sigrok>, e.g.E<nbsp>C<9600/8n1>.
+This should not be necessary; drivers know how to communicate with devices they
+support.
+
+=item B<MinimumInterval> I<Seconds>
+
+Specifies the minimum time between measurement dispatches to I<collectd>, in
+seconds. Since some I<sigrok> supported devices can acquire measurements many
+times per second, it may be necessary to throttle these. For example, the
+I<RRD plugin> cannot process writes more than once per second.
+
+The default B<MinimumInterval> is B<0>, meaning measurements received from the
+device are always dispatched to I<collectd>. When throttled, unused
+measurements are discarded.
+
+=back
+
=head2 Plugin C<snmp>
Since the configuration of the C<snmp plugin> is a little more complicated than
other plugins, its documentation has been moved to an own manpage,
L<collectd-snmp(5)>. Please see there for details.
+=head2 Plugin C<statsd>
+
+The I<statsd plugin> listens to a UDP socket, reads "events" in the statsd
+protocol and dispatches rates or other aggregates of these numbers
+periodically.
+
+The plugin implements the I<Counter>, I<Timer>, I<Gauge> and I<Set> types which
+are dispatched as the I<collectd> types C<derive>, C<latency>, C<gauge> and
+C<objects> respectively.
+
+The following configuration options are valid:
+
+=over 4
+
+=item B<Host> I<Host>
+
+Bind to the hostname / address I<Host>. By default, the plugin will bind to the
+"any" address, i.e. accept packets sent to any of the hosts addresses.
+
+=item B<Port> I<Port>
+
+UDP port to listen to. This can be either a service name or a port number.
+Defaults to C<8125>.
+
+=item B<DeleteCounters> B<false>|B<true>
+
+=item B<DeleteTimers> B<false>|B<true>
+
+=item B<DeleteGauges> B<false>|B<true>
+
+=item B<DeleteSets> B<false>|B<true>
+
+These options control what happens if metrics are not updated in an interval.
+If set to B<False>, the default, metrics are dispatched unchanged, i.e. the
+rate of counters and size of sets will be zero, timers report C<NaN> and gauges
+are unchanged. If set to B<True>, the such metrics are not dispatched and
+removed from the internal cache.
+
+=item B<TimerPercentile> I<Percent>
+
+Calculate and dispatch the configured percentile, i.e. compute the latency, so
+that I<Percent> of all reported timers are smaller than or equal to the
+computed latency. This is useful for cutting off the long tail latency, as it's
+often done in I<Service Level Agreements> (SLAs).
+
+Different percentiles can be calculated by setting this option several times.
+If none are specified, no percentiles are calculated / dispatched.
+
+=item B<TimerLower> B<false>|B<true>
+
+=item B<TimerUpper> B<false>|B<true>
+
+=item B<TimerSum> B<false>|B<true>
+
+=item B<TimerCount> B<false>|B<true>
+
+Calculate and dispatch various values out of I<Timer> metrics received during
+an interval. If set to B<False>, the default, these values aren't calculated /
+dispatched.
+
+=back
+
=head2 Plugin C<swap>
The I<Swap plugin> collects information about used and available swap space. On
=over 4
-=item
+=item *
Check I</etc/uuid> (or I<UUIDFile>).
-=item
+=item *
Check for UUID from HAL (L<http://www.freedesktop.org/wiki/Software/hal>) if
present.
-=item
+=item *
Check for UUID from C<dmidecode> / SMBIOS.
-=item
+=item *
Check for UUID from Xen hypervisor.
Statistics about the shared memory log, a memory region to store
log messages which is flushed to disk when full. True by default.
+=item B<CollectBan> B<true>|B<false>
+
+Statistics about ban operations, such as number of bans added, retired, and
+number of objects tested against ban operations. Only available with Varnish
+3.x. False by default.
+
+=item B<CollectDirectorDNS> B<true>|B<false>
+
+DNS director lookup cache statistics. Only available with Varnish 3.x. False by
+default.
+
=item B<CollectESI> B<true>|B<false>
Edge Side Includes (ESI) parse statistics. False by default.
Inserts and look-ups in the crit bit tree based hash. Look-ups are
divided into locked and unlocked look-ups. False by default.
+=item B<CollectObjects> B<true>|B<false>
+
+Statistics on cached objects: number of objects expired, nuked (prematurely
+expired), saved, moved, etc. False by default.
+
+=item B<CollectPurge> B<true>|B<false>
+
+Statistics about purge operations, such as number of purges added, retired, and
+number of objects tested against purge operations. Only available with Varnish
+2.x. False by default.
+
+=item B<CollectSession> B<true>|B<false>
+
+Client session statistics. Number of past and current sessions, session herd and
+linger counters, etc. False by default.
+
=item B<CollectSMA> B<true>|B<false>
-malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
-The umem storage component is Solaris specific. False by default.
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
+component is Solaris specific. Only available with Varnish 2.x. False by
+default.
=item B<CollectSMS> B<true>|B<false>
=item B<CollectSM> B<true>|B<false>
-file (memory mapped file) storage statistics. False by default.
+file (memory mapped file) storage statistics. Only available with Varnish 2.x.
+False by default.
+
+=item B<CollectStruct> B<true>|B<false>
+
+Current varnish internal state statistics. Number of current sessions, objects
+in cache store, open connections to backends (with Varnish 2.x), etc. False by
+default.
=item B<CollectTotals> B<true>|B<false>
Collects overview counters, such as the number of sessions created,
the number of requests and bytes transferred. False by default.
+=item B<CollectUptime> B<true>|B<false>
+
+Varnish uptime. False by default.
+
+=item B<CollectVCL> B<true>|B<false>
+
+Number of total (available + discarded) VCL (config files). False by default.
+
=item B<CollectWorkers> B<true>|B<false>
Collect statistics about worker threads. False by default.
The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
storage and graphing project. The plugin connects to I<Carbon>, the data layer
-of I<Graphite>, and sends data via the "line based" protocol (per default using
-portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
-minimize the number of network packets.
+of I<Graphite>, via I<TCP> or I<UDP> and sends data via the "line based"
+protocol (per default using portE<nbsp>2003). The data will be sent in blocks
+of at most 1428 bytes to minimize the number of network packets.
Synopsis:
<Node "example">
Host "localhost"
Port "2003"
+ Protocol "tcp"
+ LogSendErrors true
Prefix "collectd"
</Node>
</Plugin>
Service name or port number to connect to. Defaults to C<2003>.
+=item B<Protocol> I<String>
+
+Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+
+=item B<LogSendErrors> B<false>|B<true>
+
+If set to B<true> (the default), logs errors when sending data to I<Graphite>.
+If set to B<false>, it will not log the errors. This is especially useful when
+using Protocol UDP since many times we want to use the "fire-and-forget"
+approach and logging errors fills syslog with unneeded messages.
+
=item B<Prefix> I<String>
When set, I<String> is added in front of the host name. Dots and whitespace are
Service name or port number to connect to. Defaults to C<27017>.
-=item B<Timeout> I<Timeout>
+=item B<Timeout> I<Milliseconds>
Set the timeout for each operation on I<MongoDB> to I<Timeout> milliseconds.
Setting this option to zero means no timeout, which is the default.
connections. Either a service name of a port number may be given. Please note
that numerical port numbers must be given as a string, too.
-=item B<Timeout> I<Timeout in miliseconds>
+=item B<Timeout> I<Milliseconds>
The B<Timeout> option sets the socket connection timeout, in milliseconds.
Protocol UDP
StoreRates true
AlwaysAppendDS false
- Delay 10
+ TTLFactor 2.0
</Node>
Tag "foobar"
</Plugin>
=item B<AlwaysAppendDS> B<false>|B<true>
-If set the B<true>, append the name of the I<Data Source> (DS) to the
+If set to B<true>, append the name of the I<Data Source> (DS) to the
"service", i.e. the field that, together with the "host" field, uniquely
identifies a metric in I<Riemann>. If set to B<false> (the default), this is
only done when there is more than one DS.
+=item B<TTLFactor> I<Factor>
+
+I<Riemann> events have a I<Time to Live> (TTL) which specifies how long each
+event is considered active. I<collectd> populates this field based on the
+metrics interval setting. This setting controls the factor with which the
+interval is multiplied to set the TTL. The default value is B<2.0>. Unless you
+know exactly what you're doing, you should only increase this setting from its
+default value.
+
=back
=item B<Tag> I<String>
projects / collectd.git / blobdiff