doing when they write "Signed-off-by" line.
But the patch submission requirements are a lot more relaxed
-here, because the core GIT is thousand times smaller ;-). So
-here is only the relevant bits.
+here on the technical/contents front, because the core GIT is
+thousand times smaller ;-). So here is only the relevant bits.
(1) Make separate commits for logically separate changes.
Describe the technical detail of the change(s).
-If your description starts to get long, that's a sign that you
+If your description starts to get too long, that's a sign that you
probably need to split up your commit to finer grained pieces.
+Oh, another thing. I am picky about whitespaces. Make sure your
+changes do not trigger errors with the sample pre-commit hook shipped
+in templates/hooks--pre-commit.
-(2) Generate your patch using git/cogito out of your commits.
-git diff tools generate unidiff which is the preferred format.
+(2) Generate your patch using git tools out of your commits.
+
+git based diff tools (git, Cogito, and StGIT included) generate
+unidiff which is the preferred format.
+
You do not have to be afraid to use -M option to "git diff" or
"git format-patch", if your patch involves file renames. The
receiving end can handle them just fine.
which do not belong in a patch submission. Make sure to review
your patch after generating it, to ensure accuracy. Before
sending out, please make sure it cleanly applies to the "master"
-branch head.
+branch head. If you are preparing a work based on "next" branch,
+that is fine, but please mark it as such.
(3) Sending your patches.
-People on the git mailing list needs to be able to read and
+People on the git mailing list need to be able to read and
comment on the changes you are submitting. It is important for
a developer to be able to "quote" your changes, using standard
e-mail tools, so that they may comment on specific portions of
-your code. For this reason, all patches should be submitting
-e-mail "inline". WARNING: Be wary of your MUAs word-wrap
-corrupting your patch. Do not cut-n-paste your patch.
+your code. For this reason, all patches should be submited
+"inline". WARNING: Be wary of your MUAs word-wrap
+corrupting your patch. Do not cut-n-paste your patch; you can
+lose tabs that way if you are not careful.
-It is common convention to prefix your subject line with
+It is a common convention to prefix your subject line with
[PATCH]. This lets people easily distinguish patches from other
e-mail discussions.
SYNOPSIS
--------
-'git-ls-files' [-z] [-t]
+[verse]
+'git-ls-files' [-z] [-t] [-v]
(--[cached|deleted|others|ignored|stage|unmerged|killed|modified])\*
(-[c|d|o|i|s|u|k|m])\*
[-x <pattern>|--exclude=<pattern>]
K:: to be killed
?:: other
+-v::
+ Similar to `-t`, but use lowercase letters for files
+ that are marked as 'always matching index'.
+
--full-name::
When run from a subdirectory, the command usually
outputs paths relative to the current directory. This
path of the top-level directory relative to the current
directory (typically a sequence of "../", or an empty string).
+--git-dir::
+ Show `$GIT_DIR` if defined else show the path to the .git directory.
+
+--short, --short=number::
+ Instead of outputting the full SHA1 values of object names try to
+ abbriviate them to a shorter unique name. When no length is specified
+ 7 is used. The minimum length is 4.
+
--since=datestring, --after=datestring::
Parses the date string, and outputs corresponding
--max-age= parameter for git-rev-list command.
SYNOPSIS
--------
+[verse]
'git-tag' [-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <name> [<head>]
+'git-tag' -l [<pattern>]
DESCRIPTION
-----------
-Adds a 'tag' reference in .git/refs/tags/
+Adds a 'tag' reference in `.git/refs/tags/`
Unless `-f` is given, the tag must not yet exist in
`.git/refs/tags/` directory.
`-d <tag>` deletes the tag.
+`-l <pattern>` lists tags that match the given pattern (or all
+if no pattern is given).
+
OPTIONS
-------
-a::
-d::
Delete an existing tag with the given name
+-l <pattern>::
+ List tags that match the given pattern (or all if no pattern is given).
+
-m <msg>::
Use the given tag message (instead of prompting)
SYNOPSIS
--------
+[verse]
'git-update-index'
[--add] [--remove | --force-remove] [--replace]
[--refresh [-q] [--unmerged] [--ignore-missing]]
[--cacheinfo <mode> <object> <file>]\*
[--chmod=(+|-)x]
+ [--assume-unchanged | --no-assume-unchanged]
+ [--really-refresh]
[--info-only] [--index-info]
[-z] [--stdin]
[--verbose]
--chmod=(+|-)x::
Set the execute permissions on the updated files.
+--assume-unchanged, --no-assume-unchanged::
+ When these flags are specified, the object name recorded
+ for the paths are not updated. Instead, these options
+ sets and unsets the "assume unchanged" bit for the
+ paths. When the "assume unchanged" bit is on, git stops
+ checking the working tree files for possible
+ modifications, so you need to manually unset the bit to
+ tell git when you change the working tree file. This is
+ sometimes helpful when working with a big project on a
+ filesystem that has very slow lstat(2) system call
+ (e.g. cifs).
+
--info-only::
Do not create objects in the object database for all
<file> arguments that follow this flag; just insert
------------
+Using "assume unchanged" bit
+----------------------------
+
+Many operations in git depend on your filesystem to have an
+efficient `lstat(2)` implementation, so that `st_mtime`
+information for working tree files can be cheaply checked to see
+if the file contents have changed from the version recorded in
+the index file. Unfortunately, some filesystems have
+inefficient `lstat(2)`. If your filesystem is one of them, you
+can set "assume unchanged" bit to paths you have not changed to
+cause git not to do this check. Note that setting this bit on a
+path does not mean git will check the contents of the file to
+see if it has changed -- it makes git to omit any checking and
+assume it has *not* changed. When you make changes to working
+tree files, you have to explicitly tell git about it by dropping
+"assume unchanged" bit, either before or after you modify them.
+
+In order to set "assume unchanged" bit, use `--assume-unchanged`
+option. To unset, use `--no-assume-unchanged`.
+
+The command looks at `core.ignorestat` configuration variable. When
+this is true, paths updated with `git-update-index paths...` and
+paths updated with other git commands that update both index and
+working tree (e.g. `git-apply --index`, `git-checkout-index -u`,
+and `git-read-tree -u`) are automatically marked as "assume
+unchanged". Note that "assume unchanged" bit is *not* set if
+`git-update-index --refresh` finds the working tree file matches
+the index (use `git-update-index --really-refresh` if you want
+to mark them as "assume unchanged").
+
+
Examples
--------
To update and refresh only the files already checked out:
$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
----------------
+On an inefficient filesystem with `core.ignorestat` set:
+
+------------
+$ git update-index --really-refresh <1>
+$ git update-index --no-assume-unchanged foo.c <2>
+$ git diff --name-only <3>
+$ edit foo.c
+$ git diff --name-only <4>
+M foo.c
+$ git update-index foo.c <5>
+$ git diff --name-only <6>
+$ edit foo.c
+$ git diff --name-only <7>
+$ git update-index --no-assume-unchanged foo.c <8>
+$ git diff --name-only <9>
+M foo.c
+
+<1> forces lstat(2) to set "assume unchanged" bits for paths
+ that match index.
+<2> mark the path to be edited.
+<3> this does lstat(2) and finds index matches the path.
+<4> this does lstat(2) and finds index does not match the path.
+<5> registering the new version to index sets "assume unchanged" bit.
+<6> and it is assumed unchanged.
+<7> even after you edit it.
+<8> you can tell about the change after the fact.
+<9> now it checks with lstat(2) and finds it has been changed.
+------------
+
Configuration
-------------
executable bit. On such an unfortunate filesystem, you may
need to use `git-update-index --chmod=`.
+The command looks at `core.ignorestat` configuration variable. See
+'Using "assume unchanged" bit' section above.
+
See Also
--------
#
# Define NO_ICONV if your libc does not properly support iconv.
#
+# Define NO_ACCURATE_DIFF if your diff program at least sometimes misses
+# a missing newline at the end of the file.
+#
+# Define NO_PYTHON if you want to loose all benefits of the recursive merge.
+#
# Define COLLISION_CHECK below if you believe that SHA1's
# 1461501637330902918203684832716283019655932542976 hashes do not give you
# sufficient guarantee that no collisions between objects will ever happen.
# The ones that do not have to link with lcrypto nor lz.
SIMPLE_PROGRAMS = \
- git-get-tar-commit-id$X git-mailinfo$X git-mailsplit$X \
+ git-get-tar-commit-id$X git-mailsplit$X \
git-stripspace$X git-daemon$X
# ... and all the rest that could be moved out of bindir to gitexecdir
git-convert-objects$X git-diff-files$X \
git-diff-index$X git-diff-stages$X \
git-diff-tree$X git-fetch-pack$X git-fsck-objects$X \
- git-hash-object$X git-index-pack$X git-init-db$X \
- git-local-fetch$X git-ls-files$X git-ls-tree$X git-merge-base$X \
+ git-hash-object$X git-index-pack$X git-init-db$X git-local-fetch$X \
+ git-ls-files$X git-ls-tree$X git-mailinfo$X git-merge-base$X \
git-merge-index$X git-mktag$X git-pack-objects$X git-patch-id$X \
git-peek-remote$X git-prune-packed$X git-read-tree$X \
git-receive-pack$X git-rev-list$X git-rev-parse$X \
git-upload-pack$X git-verify-pack$X git-write-tree$X \
git-update-ref$X git-symbolic-ref$X git-check-ref-format$X \
git-name-rev$X git-pack-redundant$X git-repo-config$X git-var$X \
- git-describe$X
+ git-describe$X git-merge-tree$X
# what 'all' will build and 'install' will install, in gitexecdir
ALL_PROGRAMS = $(PROGRAMS) $(SIMPLE_PROGRAMS) $(SCRIPTS)
LIBS = $(LIB_FILE)
LIBS += -lz
-# Shell quote;
-# Result of this needs to be placed inside ''
-shq = $(subst ','\'',$(1))
-# This has surrounding ''
-shellquote = '$(call shq,$(1))'
-
#
# Platform specific tweaks
#
NO_STRCASESTR=YesPlease
NEEDS_LIBICONV=YesPlease
endif
+ifeq ($(uname_S),IRIX64)
+ NO_IPV6=YesPlease
+ NO_SETENV=YesPlease
+ NO_STRCASESTR=YesPlease
+ NO_SOCKADDR_STORAGE=YesPlease
+ SHELL_PATH=/usr/gnu/bin/bash
+ ALL_CFLAGS += -DPATH_MAX=1024
+ # for now, build 32-bit version
+ ALL_LDFLAGS += -L/usr/lib32
+endif
ifneq (,$(findstring arm,$(uname_M)))
ARM_SHA1 = YesPlease
endif
ifdef WITH_OWN_SUBPROCESS_PY
PYMODULES += compat/subprocess.py
else
- ifneq ($(shell $(PYTHON_PATH) -c 'import subprocess;print"OK"' 2>/dev/null),OK)
- PYMODULES += compat/subprocess.py
+ ifeq ($(NO_PYTHON),)
+ ifneq ($(shell $(PYTHON_PATH) -c 'import subprocess;print"OK"' 2>/dev/null),OK)
+ PYMODULES += compat/subprocess.py
+ endif
endif
endif
endif
endif
endif
+ifdef NO_ACCURATE_DIFF
+ ALL_CFLAGS += -DNO_ACCURATE_DIFF
+endif
+
+# Shell quote (do not use $(call) to accomodate ancient setups);
+
+SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
+
+DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
+bindir_SQ = $(subst ','\'',$(bindir))
+gitexecdir_SQ = $(subst ','\'',$(gitexecdir))
+template_dir_SQ = $(subst ','\'',$(template_dir))
-ALL_CFLAGS += -DSHA1_HEADER=$(call shellquote,$(SHA1_HEADER)) $(COMPAT_CFLAGS)
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
+PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH))
+GIT_PYTHON_DIR_SQ = $(subst ','\'',$(GIT_PYTHON_DIR))
+
+ALL_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' $(COMPAT_CFLAGS)
LIB_OBJS += $(COMPAT_OBJS)
export prefix TAR INSTALL DESTDIR SHELL_PATH template_dir
### Build rules
$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
rm -f $@
- sed -e '1s|#!.*/sh|#!$(call shq,$(SHELL_PATH))|' \
+ sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
-e 's/@@NO_CURL@@/$(NO_CURL)/g' \
+ -e 's/@@NO_PYTHON@@/$(NO_PYTHON)/g' \
$@.sh >$@
chmod +x $@
$(patsubst %.perl,%,$(SCRIPT_PERL)) : % : %.perl
rm -f $@
- sed -e '1s|#!.*perl|#!$(call shq,$(PERL_PATH))|' \
+ sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
$@.perl >$@
chmod +x $@
$(patsubst %.py,%,$(SCRIPT_PYTHON)) : % : %.py
rm -f $@
- sed -e '1s|#!.*python|#!$(call shq,$(PYTHON_PATH))|' \
- -e 's|@@GIT_PYTHON_PATH@@|$(call shq,$(GIT_PYTHON_DIR))|g' \
+ sed -e '1s|#!.*python|#!$(PYTHON_PATH_SQ)|' \
+ -e 's|@@GIT_PYTHON_PATH@@|$(GIT_PYTHON_DIR_SQ)|g' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
$@.py >$@
chmod +x $@
%.o: %.S
$(CC) -o $*.o -c $(ALL_CFLAGS) $<
-exec_cmd.o: ALL_CFLAGS += -DGIT_EXEC_PATH=\"$(gitexecdir)\"
+exec_cmd.o: exec_cmd.c
+ $(CC) -o $*.o -c $(ALL_CFLAGS) '-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' $<
git-%$X: %.o $(LIB_FILE)
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
-git-mailinfo$X : SIMPLE_LIB += $(LIB_4_ICONV)
$(SIMPLE_PROGRAMS) : $(LIB_FILE)
$(SIMPLE_PROGRAMS) : git-%$X : %.o
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIB_FILE) $(SIMPLE_LIB)
-git-http-fetch$X: fetch.o http.o
-git-http-push$X: http.o
+git-mailinfo$X: mailinfo.o $(LIB_FILE)
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
+ $(LIB_FILE) $(SIMPLE_LIB) $(LIB_4_ICONV)
+
git-local-fetch$X: fetch.o
git-ssh-fetch$X: rsh.o fetch.o
git-ssh-upload$X: rsh.o
git-ssh-pull$X: rsh.o fetch.o
git-ssh-push$X: rsh.o
-git-http-fetch$X: LIBS += $(CURL_LIBCURL)
-git-http-push$X: LIBS += $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
-git-rev-list$X: LIBS += $(OPENSSL_LIBSSL)
+git-http-fetch$X: fetch.o http.o http-fetch.o
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
+ $(LIBS) $(CURL_LIBCURL)
+
+git-http-push$X: http.o http-push.o
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
+ $(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
+
+git-rev-list$X: rev-list.o
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
+ $(LIBS) $(OPENSSL_LIBSSL)
init-db.o: init-db.c
$(CC) -c $(ALL_CFLAGS) \
- -DDEFAULT_GIT_TEMPLATE_DIR=$(call shellquote,"$(template_dir)") $*.c
+ -DDEFAULT_GIT_TEMPLATE_DIR='"$(template_dir_SQ)"' $*.c
$(LIB_OBJS): $(LIB_H)
$(patsubst git-%$X,%.o,$(PROGRAMS)): $(LIB_H)
### Testing rules
+# GNU make supports exporting all variables by "export" without parameters.
+# However, the environment gets quite big, and some programs have problems
+# with that.
+
+export NO_PYTHON
+
test: all
$(MAKE) -C t/ all
### Installation rules
install: all
- $(INSTALL) -d -m755 $(call shellquote,$(DESTDIR)$(bindir))
- $(INSTALL) -d -m755 $(call shellquote,$(DESTDIR)$(gitexecdir))
- $(INSTALL) $(ALL_PROGRAMS) $(call shellquote,$(DESTDIR)$(gitexecdir))
- $(INSTALL) git$X gitk $(call shellquote,$(DESTDIR)$(bindir))
+ $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(bindir_SQ)'
+ $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(gitexecdir_SQ)'
+ $(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexecdir_SQ)'
+ $(INSTALL) git$X gitk '$(DESTDIR_SQ)$(bindir_SQ)'
$(MAKE) -C templates install
- $(INSTALL) -d -m755 $(call shellquote,$(DESTDIR)$(GIT_PYTHON_DIR))
- $(INSTALL) $(PYMODULES) $(call shellquote,$(DESTDIR)$(GIT_PYTHON_DIR))
+ $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
+ $(INSTALL) $(PYMODULES) '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
install-doc:
$(MAKE) -C Documentation install
size -= len;
}
+#ifdef NO_ACCURATE_DIFF
+ if (oldsize > 0 && old[oldsize - 1] == '\n' &&
+ newsize > 0 && new[newsize - 1] == '\n') {
+ oldsize--;
+ newsize--;
+ }
+#endif
+
offset = find_offset(buf, desc->size, old, oldsize, frag->newpos);
if (offset >= 0) {
int diff = newsize - oldsize;
return -1;
}
- changed = ce_match_stat(active_cache[pos], &st);
+ changed = ce_match_stat(active_cache[pos], &st, 1);
if (changed)
return error("%s: does not match index",
old_name);
#define CE_NAMEMASK (0x0fff)
#define CE_STAGEMASK (0x3000)
#define CE_UPDATE (0x4000)
+#define CE_VALID (0x8000)
#define CE_STAGESHIFT 12
#define create_ce_flags(len, stage) htons((len) | ((stage) << CE_STAGESHIFT))
extern int remove_cache_entry_at(int pos);
extern int remove_file_from_cache(const char *path);
extern int ce_same_name(struct cache_entry *a, struct cache_entry *b);
-extern int ce_match_stat(struct cache_entry *ce, struct stat *st);
-extern int ce_modified(struct cache_entry *ce, struct stat *st);
+extern int ce_match_stat(struct cache_entry *ce, struct stat *st, int);
+extern int ce_modified(struct cache_entry *ce, struct stat *st, int);
extern int ce_path_match(const struct cache_entry *ce, const char **pathspec);
extern int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object, const char *type);
extern int index_pipe(unsigned char *sha1, int fd, const char *type, int write_object);
extern void rollback_index_file(struct cache_file *);
extern int trust_executable_bit;
+extern int assume_unchanged;
extern int only_use_symrefs;
extern int diff_rename_limit_default;
extern int shared_repository;
unsigned long approxidate(const char *);
extern int setup_ident(void);
-extern const char *git_author_info(void);
-extern const char *git_committer_info(void);
+extern const char *git_author_info(int);
+extern const char *git_committer_info(int);
struct checkout {
const char *base_dir;
int all = 0;
prefix = setup_git_directory();
+ git_config(git_default_config);
prefix_length = prefix ? strlen(prefix) : 0;
if (read_cache() < 0) {
add_buffer(&buffer, &size, "parent %s\n", sha1_to_hex(parent_sha1[i]));
/* Person/date information */
- add_buffer(&buffer, &size, "author %s\n", git_author_info());
- add_buffer(&buffer, &size, "committer %s\n\n", git_committer_info());
+ add_buffer(&buffer, &size, "author %s\n", git_author_info(1));
+ add_buffer(&buffer, &size, "committer %s\n\n", git_committer_info(1));
/* And add the comment */
while (fgets(comment, sizeof(comment), stdin) != NULL)
/*
* Performs an in-place topological sort on the list supplied.
*/
-void sort_in_topological_order(struct commit_list ** list)
+void sort_in_topological_order(struct commit_list ** list, int lifo)
{
struct commit_list * next = *list;
struct commit_list * work = NULL, **insert;
}
next=next->next;
}
+
/* process the list in topological order */
+ if (!lifo)
+ sort_by_date(&work);
while (work) {
struct commit * work_item = pop_commit(&work);
struct sort_node * work_node = (struct sort_node *)work_item->object.util;
* guaranteeing topological order.
*/
pn->indegree--;
- if (!pn->indegree)
- commit_list_insert(parent, &work);
+ if (!pn->indegree) {
+ if (!lifo)
+ insert_by_date(parent, &work);
+ else
+ commit_list_insert(parent, &work);
+ }
}
parents=parents->next;
}
* Post-conditions:
* invariant of resulting list is:
* a reachable from b => ord(b) < ord(a)
+ * in addition, when lifo == 0, commits on parallel tracks are
+ * sorted in the dates order.
*/
-void sort_in_topological_order(struct commit_list ** list);
+void sort_in_topological_order(struct commit_list ** list, int lifo);
#endif /* COMMIT_H */
return 0;
}
+ if (!strcmp(var, "core.ignorestat")) {
+ assume_unchanged = git_config_bool(var, value);
+ return 0;
+ }
+
if (!strcmp(var, "core.symrefsonly")) {
only_use_symrefs = git_config_bool(var, value);
return 0;
--- /dev/null
+Contributed Software
+
+Although these pieces are available as part of the official git
+source tree, they are in somewhat different status. The
+intention is to keep interesting tools around git here, maybe
+even experimental ones, to give users an easier access to them,
+and to give tools wider exposure, so that they can be improved
+faster.
+
+I am not expecting to touch these myself that much. As far as
+my day-to-day operation is concerned, these subdirectories are
+owned by their respective primary authors. I am willing to help
+if users of these components and the contrib/ subtree "owners"
+have technical/design issues to resolve, but the initiative to
+fix and/or enhance things _must_ be on the side of the subtree
+owners. IOW, I won't be actively looking for bugs and rooms for
+enhancements in them as the git maintainer -- I may only do so
+just as one of the users when I want to scratch my own itch. If
+you have patches to things in contrib/ area, the patch should be
+first sent to the primary author, and then the primary author
+should ack and forward it to me (git pull request is nicer).
+This is the same way as how I have been treating gitk, and to a
+lesser degree various foreign SCM interfaces, so you know the
+drill.
+
+I expect that things that start their life in the contrib/ area
+to graduate out of contrib/ once they mature, either by becoming
+projects on their own, or moving to the toplevel directory. On
+the other hand, I expect I'll be proposing removal of disused
+and inactive ones from time to time.
+
+If you have new things to add to this area, please first propose
+it on the git mailing list, and after a list discussion proves
+there are some general interests (it does not have to be a
+list-wide consensus for a tool targeted to a relatively narrow
+audience -- for example I do not work with projects whose
+upstream is svn, so I have no use for git-svn myself, but it is
+of general interest for people who need to interoperate with SVN
+repositories in a way git-svn works better than git-svnimport),
+submit a patch to create a subdirectory of contrib/ and put your
+stuff there.
+
+-jc
+
--- /dev/null
+;;; git.el --- A user interface for git
+
+;; Copyright (C) 2005, 2006 Alexandre Julliard <julliard@winehq.org>
+
+;; Version: 1.0
+
+;; This program is free software; you can redistribute it and/or
+;; modify it under the terms of the GNU General Public License as
+;; published by the Free Software Foundation; either version 2 of
+;; the License, or (at your option) any later version.
+;;
+;; This program is distributed in the hope that it will be
+;; useful, but WITHOUT ANY WARRANTY; without even the implied
+;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+;; PURPOSE. See the GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public
+;; License along with this program; if not, write to the Free
+;; Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+;; MA 02111-1307 USA
+
+;;; Commentary:
+
+;; This file contains an interface for the git version control
+;; system. It provides easy access to the most frequently used git
+;; commands. The user interface is as far as possible identical to
+;; that of the PCL-CVS mode.
+;;
+;; To install: put this file on the load-path and place the following
+;; in your .emacs file:
+;;
+;; (require 'git)
+;;
+;; To start: `M-x git-status'
+;;
+;; TODO
+;; - portability to XEmacs
+;; - better handling of subprocess errors
+;; - hook into file save (after-save-hook)
+;; - diff against other branch
+;; - renaming files from the status buffer
+;; - support for appending signed-off-by
+;; - creating tags
+;; - fetch/pull
+;; - switching branches
+;; - revlist browser
+;; - git-show-branch browser
+;; - customize support
+;; - menus
+;;
+
+(eval-when-compile (require 'cl))
+(require 'ewoc)
+
+
+;;;; Faces
+;;;; ------------------------------------------------------------
+
+(defface git-status-face
+ '((((class color) (background light)) (:foreground "purple")))
+ "Git mode face used to highlight added and modified files.")
+
+(defface git-unmerged-face
+ '((((class color) (background light)) (:foreground "red" :bold t)))
+ "Git mode face used to highlight unmerged files.")
+
+(defface git-unknown-face
+ '((((class color) (background light)) (:foreground "goldenrod" :bold t)))
+ "Git mode face used to highlight unknown files.")
+
+(defface git-uptodate-face
+ '((((class color) (background light)) (:foreground "grey60")))
+ "Git mode face used to highlight up-to-date files.")
+
+(defface git-ignored-face
+ '((((class color) (background light)) (:foreground "grey60")))
+ "Git mode face used to highlight ignored files.")
+
+(defface git-mark-face
+ '((((class color) (background light)) (:foreground "red" :bold t)))
+ "Git mode face used for the file marks.")
+
+(defface git-header-face
+ '((((class color) (background light)) (:foreground "blue")))
+ "Git mode face used for commit headers.")
+
+(defface git-separator-face
+ '((((class color) (background light)) (:foreground "brown")))
+ "Git mode face used for commit separator.")
+
+(defface git-permission-face
+ '((((class color) (background light)) (:foreground "green" :bold t)))
+ "Git mode face used for permission changes.")
+
+(defvar git-committer-name nil
+ "*User name to use for commits.
+If not set, fall back to `add-log-full-name' and then `user-full-name'.")
+
+(defvar git-committer-email nil
+ "*Email address to use for commits.
+If not set, fall back to `add-log-mailing-address' and then `user-mail-address'.")
+
+(defvar git-commits-coding-system 'utf-8
+ "Default coding system for git commits.")
+
+(defconst git-log-msg-separator "--- log message follows this line ---")
+
+(defconst git-per-dir-ignore-file ".gitignore"
+ "Name of the per-directory ignore file.")
+
+
+;;;; Utilities
+;;;; ------------------------------------------------------------
+
+(defun git-get-env-strings (env)
+ "Build a list of NAME=VALUE strings from a list of environment strings."
+ (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env))
+
+(defun git-call-process-env (buffer env &rest args)
+ "Wrapper for call-process that sets environment strings."
+ (if env
+ (apply #'call-process "env" nil buffer nil
+ (append (git-get-env-strings env) (list "git") args))
+ (apply #'call-process "git" nil buffer nil args)))
+
+(defun git-run-process-region (buffer start end program args)
+ "Run a git process with a buffer region as input."
+ (let ((output-buffer (current-buffer))
+ (dir default-directory))
+ (with-current-buffer buffer
+ (cd dir)
+ (apply #'call-process-region start end program
+ nil (list output-buffer nil) nil args))))
+
+(defun git-run-command-buffer (buffer-name &rest args)
+ "Run a git command, sending the output to a buffer named BUFFER-NAME."
+ (let ((dir default-directory)
+ (buffer (get-buffer-create buffer-name)))
+ (message "Running git %s..." (car args))
+ (with-current-buffer buffer
+ (let ((default-directory dir)
+ (buffer-read-only nil))
+ (erase-buffer)
+ (apply #'git-call-process-env buffer nil args)))
+ (message "Running git %s...done" (car args))
+ buffer))
+
+(defun git-run-command (buffer env &rest args)
+ (message "Running git %s..." (car args))
+ (apply #'git-call-process-env buffer env args)
+ (message "Running git %s...done" (car args)))
+
+(defun git-run-command-region (buffer start end env &rest args)
+ "Run a git command with specified buffer region as input."
+ (message "Running git %s..." (car args))
+ (unless (eq 0 (if env
+ (git-run-process-region
+ buffer start end "env"
+ (append (git-get-env-strings env) (list "git") args))
+ (git-run-process-region
+ buffer start end "git" args)))
+ (error "Failed to run \"git %s\":\n%s" (mapconcat (lambda (x) x) args " ") (buffer-string)))
+ (message "Running git %s...done" (car args)))
+
+(defun git-get-string-sha1 (string)
+ "Read a SHA1 from the specified string."
+ (let ((pos (string-match "[0-9a-f]\\{40\\}" string)))
+ (and pos (substring string pos (match-end 0)))))
+
+(defun git-get-committer-name ()
+ "Return the name to use as GIT_COMMITTER_NAME."
+ ; copied from log-edit
+ (or git-committer-name
+ (and (boundp 'add-log-full-name) add-log-full-name)
+ (and (fboundp 'user-full-name) (user-full-name))
+ (and (boundp 'user-full-name) user-full-name)))
+
+(defun git-get-committer-email ()
+ "Return the email address to use as GIT_COMMITTER_EMAIL."
+ ; copied from log-edit
+ (or git-committer-email
+ (and (boundp 'add-log-mailing-address) add-log-mailing-address)
+ (and (fboundp 'user-mail-address) (user-mail-address))
+ (and (boundp 'user-mail-address) user-mail-address)))
+
+(defun git-escape-file-name (name)
+ "Escape a file name if necessary."
+ (if (string-match "[\n\t\"\\]" name)
+ (concat "\""
+ (mapconcat (lambda (c)
+ (case c
+ (?\n "\\n")
+ (?\t "\\t")
+ (?\\ "\\\\")
+ (?\" "\\\"")
+ (t (char-to-string c))))
+ name "")
+ "\"")
+ name))
+
+(defun git-get-top-dir (dir)
+ "Retrieve the top-level directory of a git tree."
+ (let ((cdup (with-output-to-string
+ (with-current-buffer standard-output
+ (cd dir)
+ (unless (eq 0 (call-process "git" nil t nil "rev-parse" "--show-cdup"))
+ (error "cannot find top-level git tree for %s." dir))))))
+ (expand-file-name (concat (file-name-as-directory dir)
+ (car (split-string cdup "\n"))))))
+
+;stolen from pcl-cvs
+(defun git-append-to-ignore (file)
+ "Add a file name to the ignore file in its directory."
+ (let* ((fullname (expand-file-name file))
+ (dir (file-name-directory fullname))
+ (name (file-name-nondirectory fullname)))
+ (save-window-excursion
+ (set-buffer (find-file-noselect (expand-file-name git-per-dir-ignore-file dir)))
+ (goto-char (point-max))
+ (unless (zerop (current-column)) (insert "\n"))
+ (insert name "\n")
+ (sort-lines nil (point-min) (point-max))
+ (save-buffer))))
+
+
+;;;; Wrappers for basic git commands
+;;;; ------------------------------------------------------------
+
+(defun git-rev-parse (rev)
+ "Parse a revision name and return its SHA1."
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t nil "rev-parse" rev)))))
+
+(defun git-symbolic-ref (ref)
+ "Wrapper for the git-symbolic-ref command."
+ (car
+ (split-string
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t nil "symbolic-ref" ref)))
+ "\n")))
+
+(defun git-update-ref (ref val &optional oldval)
+ "Update a reference by calling git-update-ref."
+ (apply #'git-call-process-env nil nil "update-ref" ref val (if oldval (list oldval))))
+
+(defun git-read-tree (tree &optional index-file)
+ "Read a tree into the index file."
+ (apply #'git-call-process-env nil
+ (if index-file `(("GIT_INDEX_FILE" . ,index-file)) nil)
+ "read-tree" (if tree (list tree))))
+
+(defun git-write-tree (&optional index-file)
+ "Call git-write-tree and return the resulting tree SHA1 as a string."
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t
+ (if index-file `(("GIT_INDEX_FILE" . ,index-file)) nil)
+ "write-tree")))))
+
+(defun git-commit-tree (buffer tree head)
+ "Call git-commit-tree with buffer as input and return the resulting commit SHA1."
+ (let ((author-name (git-get-committer-name))
+ (author-email (git-get-committer-email))
+ author-date log-start log-end args)
+ (when head
+ (push "-p" args)
+ (push head args))
+ (with-current-buffer buffer
+ (goto-char (point-min))
+ (if
+ (setq log-start (re-search-forward (concat "^" git-log-msg-separator "\n") nil t))
+ (save-restriction
+ (narrow-to-region (point-min) log-start)
+ (goto-char (point-min))
+ (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t)
+ (setq author-name (match-string 1)
+ author-email (match-string 2)))
+ (goto-char (point-min))
+ (when (re-search-forward "^Date: +\\(.*\\)$" nil t)
+ (setq author-date (match-string 1)))
+ (goto-char (point-min))
+ (while (re-search-forward "^Parent: +\\([0-9a-f]+\\)" nil t)
+ (unless (string-equal head (match-string 1))
+ (push "-p" args)
+ (push (match-string 1) args))))
+ (setq log-start (point-min)))
+ (setq log-end (point-max)))
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (let ((coding-system-for-write git-commits-coding-system)
+ (env `(("GIT_AUTHOR_NAME" . ,author-name)
+ ("GIT_AUTHOR_EMAIL" . ,author-email)
+ ("GIT_COMMITTER_NAME" . ,(git-get-committer-name))
+ ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email)))))
+ (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env))
+ (apply #'git-run-command-region
+ buffer log-start log-end env
+ "commit-tree" tree (nreverse args))))))))
+
+(defun git-empty-db-p ()
+ "Check if the git db is empty (no commit done yet)."
+ (not (eq 0 (call-process "git" nil nil nil "rev-parse" "--verify" "HEAD"))))
+
+(defun git-get-merge-heads ()
+ "Retrieve the merge heads from the MERGE_HEAD file if present."
+ (let (heads)
+ (when (file-readable-p ".git/MERGE_HEAD")
+ (with-temp-buffer
+ (insert-file-contents ".git/MERGE_HEAD" nil nil nil t)
+ (goto-char (point-min))
+ (while (re-search-forward "[0-9a-f]\\{40\\}" nil t)
+ (push (match-string 0) heads))))
+ (nreverse heads)))
+
+;;;; File info structure
+;;;; ------------------------------------------------------------
+
+; fileinfo structure stolen from pcl-cvs
+(defstruct (git-fileinfo
+ (:copier nil)
+ (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked))
+ (:conc-name git-fileinfo->))
+ marked ;; t/nil
+ state ;; current state
+ name ;; file name
+ old-perm new-perm ;; permission flags
+ rename-state ;; rename or copy state
+ orig-name ;; original name for renames or copies
+ needs-refresh) ;; whether file needs to be refreshed
+
+(defvar git-status nil)
+
+(defun git-clear-status (status)
+ "Remove everything from the status list."
+ (ewoc-filter status (lambda (info) nil)))
+
+(defun git-set-files-state (files state)
+ "Set the state of a list of files."
+ (dolist (info files)
+ (unless (eq (git-fileinfo->state info) state)
+ (setf (git-fileinfo->state info) state)
+ (setf (git-fileinfo->rename-state info) nil)
+ (setf (git-fileinfo->orig-name info) nil)
+ (setf (git-fileinfo->needs-refresh info) t))))
+
+(defun git-state-code (code)
+ "Convert from a string to a added/deleted/modified state."
+ (case (string-to-char code)
+ (?M 'modified)
+ (?? 'unknown)
+ (?A 'added)
+ (?D 'deleted)
+ (?U 'unmerged)
+ (t nil)))
+
+(defun git-status-code-as-string (code)
+ "Format a git status code as string."
+ (case code
+ ('modified (propertize "Modified" 'face 'git-status-face))
+ ('unknown (propertize "Unknown " 'face 'git-unknown-face))
+ ('added (propertize "Added " 'face 'git-status-face))
+ ('deleted (propertize "Deleted " 'face 'git-status-face))
+ ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face))
+ ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face))
+ ('ignored (propertize "Ignored " 'face 'git-ignored-face))
+ (t "? ")))
+
+(defun git-rename-as-string (info)
+ "Return a string describing the copy or rename associated with INFO, or an empty string if none."
+ (let ((state (git-fileinfo->rename-state info)))
+ (if state
+ (propertize
+ (concat " ("
+ (if (eq state 'copy) "copied from "
+ (if (eq (git-fileinfo->state info) 'added) "renamed to "
+ "renamed from "))
+ (git-escape-file-name (git-fileinfo->orig-name info))
+ ")") 'face 'git-status-face)
+ "")))
+
+(defun git-permissions-as-string (old-perm new-perm)
+ "Format a permission change as string."
+ (propertize
+ (if (or (not old-perm)
+ (not new-perm)
+ (eq 0 (logand #O111 (logxor old-perm new-perm))))
+ " "
+ (if (eq 0 (logand #O111 old-perm)) "+x" "-x"))
+ 'face 'git-permission-face))
+
+(defun git-fileinfo-prettyprint (info)
+ "Pretty-printer for the git-fileinfo structure."
+ (insert (format " %s %s %s %s%s"
+ (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ")
+ (git-status-code-as-string (git-fileinfo->state info))
+ (git-permissions-as-string (git-fileinfo->old-perm info) (git-fileinfo->new-perm info))
+ (git-escape-file-name (git-fileinfo->name info))
+ (git-rename-as-string info))))
+
+(defun git-parse-status (status)
+ "Parse the output of git-diff-index in the current buffer."
+ (goto-char (point-min))
+ (while (re-search-forward
+ ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMU]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0"
+ nil t 1)
+ (let ((old-perm (string-to-number (match-string 1) 8))
+ (new-perm (string-to-number (match-string 2) 8))
+ (state (or (match-string 4) (match-string 6)))
+ (name (or (match-string 5) (match-string 7)))
+ (new-name (match-string 8)))
+ (if new-name ; copy or rename
+ (if (eq ?C (string-to-char state))
+ (ewoc-enter-last status (git-create-fileinfo 'added new-name old-perm new-perm 'copy name))
+ (ewoc-enter-last status (git-create-fileinfo 'deleted name 0 0 'rename new-name))
+ (ewoc-enter-last status (git-create-fileinfo 'added new-name old-perm new-perm 'rename name)))
+ (ewoc-enter-last status (git-create-fileinfo (git-state-code state) name old-perm new-perm))))))
+
+(defun git-find-status-file (status file)
+ "Find a given file in the status ewoc and return its node."
+ (let ((node (ewoc-nth status 0)))
+ (while (and node (not (string= file (git-fileinfo->name (ewoc-data node)))))
+ (setq node (ewoc-next status node)))
+ node))
+
+(defun git-parse-ls-files (status default-state &optional skip-existing)
+ "Parse the output of git-ls-files in the current buffer."
+ (goto-char (point-min))
+ (let (infolist)
+ (while (re-search-forward "\\([HMRCK?]\\) \\([^\0]*\\)\0" nil t 1)
+ (let ((state (match-string 1))
+ (name (match-string 2)))
+ (unless (and skip-existing (git-find-status-file status name))
+ (push (git-create-fileinfo (or (git-state-code state) default-state) name) infolist))))
+ (dolist (info (nreverse infolist))
+ (ewoc-enter-last status info))))
+
+(defun git-parse-ls-unmerged (status)
+ "Parse the output of git-ls-files -u in the current buffer."
+ (goto-char (point-min))
+ (let (files)
+ (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t)
+ (let ((node (git-find-status-file status (match-string 1))))
+ (when node (push (ewoc-data node) files))))
+ (git-set-files-state files 'unmerged)))
+
+(defun git-add-status-file (state name)
+ "Add a new file to the status list (if not existing already) and return its node."
+ (unless git-status (error "Not in git-status buffer."))
+ (or (git-find-status-file git-status name)
+ (ewoc-enter-last git-status (git-create-fileinfo state name))))
+
+(defun git-marked-files ()
+ "Return a list of all marked files, or if none a list containing just the file at cursor position."
+ (unless git-status (error "Not in git-status buffer."))
+ (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info)))
+ (list (ewoc-data (ewoc-locate git-status)))))
+
+(defun git-marked-files-state (&rest states)
+ "Return marked files that are in the specified states."
+ (let ((files (git-marked-files))
+ result)
+ (dolist (info files)
+ (when (memq (git-fileinfo->state info) states)
+ (push info result)))
+ result))
+
+(defun git-refresh-files ()
+ "Refresh all files that need it and clear the needs-refresh flag."
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map
+ (lambda (info)
+ (let ((refresh (git-fileinfo->needs-refresh info)))
+ (setf (git-fileinfo->needs-refresh info) nil)
+ refresh))
+ git-status)
+ ; move back to goal column
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-refresh-ewoc-hf (status)
+ "Refresh the ewoc header and footer."
+ (let ((branch (git-symbolic-ref "HEAD"))
+ (head (if (git-empty-db-p) "Nothing committed yet"
+ (substring (git-rev-parse "HEAD") 0 10)))
+ (merge-heads (git-get-merge-heads)))
+ (ewoc-set-hf status
+ (format "Directory: %s\nBranch: %s\nHead: %s%s\n"
+ default-directory
+ (if (string-match "^refs/heads/" branch)
+ (substring branch (match-end 0))
+ branch)
+ head
+ (if merge-heads
+ (concat "\nMerging: "
+ (mapconcat (lambda (str) (substring str 0 10)) merge-heads " "))
+ ""))
+ (if (ewoc-nth status 0) "" " No changes."))))
+
+(defun git-get-filenames (files)
+ (mapcar (lambda (info) (git-fileinfo->name info)) files))
+
+(defun git-update-index (index-file files)
+ "Run git-update-index on a list of files."
+ (let ((env (and index-file `(("GIT_INDEX_FILE" . ,index-file))))
+ added deleted modified)
+ (dolist (info files)
+ (case (git-fileinfo->state info)
+ ('added (push info added))
+ ('deleted (push info deleted))
+ ('modified (push info modified))))
+ (when added
+ (apply #'git-run-command nil env "update-index" "--add" "--" (git-get-filenames added)))
+ (when deleted
+ (apply #'git-run-command nil env "update-index" "--remove" "--" (git-get-filenames deleted)))
+ (when modified
+ (apply #'git-run-command nil env "update-index" "--" (git-get-filenames modified)))))
+
+(defun git-do-commit ()
+ "Perform the actual commit using the current buffer as log message."
+ (interactive)
+ (let ((buffer (current-buffer))
+ (index-file (make-temp-file "gitidx")))
+ (with-current-buffer log-edit-parent-buffer
+ (if (git-marked-files-state 'unmerged)
+ (message "You cannot commit unmerged files, resolve them first.")
+ (unwind-protect
+ (let ((files (git-marked-files-state 'added 'deleted 'modified))
+ head head-tree)
+ (unless (git-empty-db-p)
+ (setq head (git-rev-parse "HEAD")
+ head-tree (git-rev-parse "HEAD^{tree}")))
+ (if files
+ (progn
+ (git-read-tree head-tree index-file)
+ (git-update-index nil files) ;update both the default index
+ (git-update-index index-file files) ;and the temporary one
+ (let ((tree (git-write-tree index-file)))
+ (if (or (not (string-equal tree head-tree))
+ (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? "))
+ (let ((commit (git-commit-tree buffer tree head)))
+ (git-update-ref "HEAD" commit head)
+ (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil))
+ (with-current-buffer buffer (erase-buffer))
+ (git-set-files-state files 'uptodate)
+ (git-refresh-files)
+ (git-refresh-ewoc-hf git-status)
+ (message "Committed %s." commit))
+ (message "Commit aborted."))))
+ (message "No files to commit.")))
+ (delete-file index-file))))))
+
+
+;;;; Interactive functions
+;;;; ------------------------------------------------------------
+
+(defun git-mark-file ()
+ "Mark the file that the cursor is on and move to the next one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) t)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-next git-status 1)))
+
+(defun git-unmark-file ()
+ "Unmark the file that the cursor is on and move to the next one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) nil)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-next git-status 1)))
+
+(defun git-unmark-file-up ()
+ "Unmark the file that the cursor is on and move to the previous one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) nil)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-prev git-status 1)))
+
+(defun git-mark-all ()
+ "Mark all files."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) t) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-unmark-all ()
+ "Unmark all files."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) nil) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-toggle-all-marks ()
+ "Toggle all file marks."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-next-file (&optional n)
+ "Move the selection down N files."
+ (interactive "p")
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-goto-next git-status n))
+
+(defun git-prev-file (&optional n)
+ "Move the selection up N files."
+ (interactive "p")
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-goto-prev git-status n))
+
+(defun git-add-file ()
+ "Add marked file(s) to the index cache."
+ (interactive)
+ (let ((files (git-marked-files-state 'unknown)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'added (file-relative-name
+ (read-file-name "File to add: " nil nil t))))
+ files))
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--add" "--" (git-get-filenames files))
+ (git-set-files-state files 'added)
+ (git-refresh-files)))
+
+(defun git-ignore-file ()
+ "Add marked file(s) to the ignore list."
+ (interactive)
+ (let ((files (git-marked-files-state 'unknown)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'unknown (file-relative-name
+ (read-file-name "File to ignore: " nil nil t))))
+ files))
+ (dolist (info files) (git-append-to-ignore (git-fileinfo->name info)))
+ (git-set-files-state files 'ignored)
+ (git-refresh-files)))
+
+(defun git-remove-file ()
+ "Remove the marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files-state 'added 'modified 'unknown 'uptodate)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'unknown (file-relative-name
+ (read-file-name "File to remove: " nil nil t))))
+ files))
+ (if (yes-or-no-p
+ (format "Remove %d file%s? " (length files) (if (> (length files) 1) "s" "")))
+ (progn
+ (dolist (info files)
+ (let ((name (git-fileinfo->name info)))
+ (when (file-exists-p name) (delete-file name))))
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--remove" "--" (git-get-filenames files))
+ ; remove unknown files from the list, set the others to deleted
+ (ewoc-filter git-status
+ (lambda (info files)
+ (not (and (memq info files) (eq (git-fileinfo->state info) 'unknown))))
+ files)
+ (git-set-files-state files 'deleted)
+ (git-refresh-files)
+ (unless (ewoc-nth git-status 0) ; refresh header if list is empty
+ (git-refresh-ewoc-hf git-status)))
+ (message "Aborting"))))
+
+(defun git-revert-file ()
+ "Revert changes to the marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files))
+ added modified)
+ (when (and files
+ (yes-or-no-p
+ (format "Revert %d file%s? " (length files) (if (> (length files) 1) "s" ""))))
+ (dolist (info files)
+ (case (git-fileinfo->state info)
+ ('added (push info added))
+ ('deleted (push info modified))
+ ('unmerged (push info modified))
+ ('modified (push info modified))))
+ (when added
+ (apply #'git-run-command nil nil "update-index" "--force-remove" "--" (git-get-filenames added))
+ (git-set-files-state added 'unknown))
+ (when modified
+ (apply #'git-run-command nil nil "checkout" "HEAD" (git-get-filenames modified))
+ (git-set-files-state modified 'uptodate))
+ (git-refresh-files))))
+
+(defun git-resolve-file ()
+ "Resolve conflicts in marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files-state 'unmerged)))
+ (when files
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--" (git-get-filenames files))
+ (git-set-files-state files 'modified)
+ (git-refresh-files))))
+
+(defun git-remove-handled ()
+ "Remove handled files from the status list."
+ (interactive)
+ (ewoc-filter git-status
+ (lambda (info)
+ (not (or (eq (git-fileinfo->state info) 'ignored)
+ (eq (git-fileinfo->state info) 'uptodate)))))
+ (unless (ewoc-nth git-status 0) ; refresh header if list is empty
+ (git-refresh-ewoc-hf git-status)))
+
+(defun git-setup-diff-buffer (buffer)
+ "Setup a buffer for displaying a diff."
+ (with-current-buffer buffer
+ (diff-mode)
+ (goto-char (point-min))
+ (setq buffer-read-only t))
+ (display-buffer buffer)
+ (shrink-window-if-larger-than-buffer))
+
+(defun git-diff-file ()
+ "Diff the marked file(s) against HEAD."
+ (interactive)
+ (let ((files (git-marked-files)))
+ (git-setup-diff-buffer
+ (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files)))))
+
+(defun git-diff-unmerged-file (stage)
+ "Diff the marked unmerged file(s) against the specified stage."
+ (let ((files (git-marked-files)))
+ (git-setup-diff-buffer
+ (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files)))))
+
+(defun git-diff-file-base ()
+ "Diff the marked unmerged file(s) against the common base file."
+ (interactive)
+ (git-diff-unmerged-file "-1"))
+
+(defun git-diff-file-mine ()
+ "Diff the marked unmerged file(s) against my pre-merge version."
+ (interactive)
+ (git-diff-unmerged-file "-2"))
+
+(defun git-diff-file-other ()
+ "Diff the marked unmerged file(s) against the other's pre-merge version."
+ (interactive)
+ (git-diff-unmerged-file "-3"))
+
+(defun git-diff-file-combined ()
+ "Do a combined diff of the marked unmerged file(s)."
+ (interactive)
+ (git-diff-unmerged-file "-c"))
+
+(defun git-diff-file-idiff ()
+ "Perform an interactive diff on the current file."
+ (interactive)
+ (error "Interactive diffs not implemented yet."))
+
+(defun git-log-file ()
+ "Display a log of changes to the marked file(s)."
+ (interactive)
+ (let* ((files (git-marked-files))
+ (coding-system-for-read git-commits-coding-system)
+ (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files))))
+ (with-current-buffer buffer
+ ; (git-log-mode) FIXME: implement log mode
+ (goto-char (point-min))
+ (setq buffer-read-only t))
+ (display-buffer buffer)))
+
+(defun git-log-edit-files ()
+ "Return a list of marked files for use in the log-edit buffer."
+ (with-current-buffer log-edit-parent-buffer
+ (git-get-filenames (git-marked-files-state 'added 'deleted 'modified))))
+
+(defun git-commit-file ()
+ "Commit the marked file(s), asking for a commit message."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((buffer (get-buffer-create "*git-commit*"))
+ (merge-heads (git-get-merge-heads))
+ (dir default-directory))
+ (with-current-buffer buffer
+ (when (eq 0 (buffer-size))
+ (cd dir)
+ (erase-buffer)
+ (insert
+ (propertize
+ (format "Author: %s <%s>\n%s"
+ (git-get-committer-name) (git-get-committer-email)
+ (if merge-heads
+ (format "Parent: %s\n%s\n"
+ (git-rev-parse "HEAD")
+ (mapconcat (lambda (str) (concat "Parent: " str)) merge-heads "\n"))
+ ""))
+ 'face 'git-header-face)
+ (propertize git-log-msg-separator 'face 'git-separator-face)
+ "\n")
+ (when (and merge-heads (file-readable-p ".git/MERGE_MSG"))
+ (insert-file-contents ".git/MERGE_MSG"))))
+ (log-edit #'git-do-commit nil #'git-log-edit-files buffer)))
+
+(defun git-find-file ()
+ "Visit the current file in its own buffer."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (find-file (git-fileinfo->name info))
+ (when (eq 'unmerged (git-fileinfo->state info))
+ (smerge-mode))))
+
+(defun git-find-file-imerge ()
+ "Visit the current file in interactive merge mode."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (find-file (git-fileinfo->name info))
+ (smerge-ediff)))
+
+(defun git-view-file ()
+ "View the current file in its own buffer."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (view-file (git-fileinfo->name info))))
+
+(defun git-refresh-status ()
+ "Refresh the git status buffer."
+ (interactive)
+ (let* ((status git-status)
+ (pos (ewoc-locate status))
+ (cur-name (and pos (git-fileinfo->name (ewoc-data pos)))))
+ (unless status (error "Not in git-status buffer."))
+ (git-clear-status status)
+ (git-run-command nil nil "update-index" "--info-only" "--refresh")
+ (if (git-empty-db-p)
+ ; we need some special handling for an empty db
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-t" "-c")
+ (git-parse-ls-files status 'added))
+ (with-temp-buffer
+ (git-run-command t nil "diff-index" "-z" "-M" "HEAD")
+ (git-parse-status status)))
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-u")
+ (git-parse-ls-unmerged status))
+ (when (file-readable-p ".git/info/exclude")
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-t" "-o"
+ "--exclude-from=.git/info/exclude"
+ (concat "--exclude-per-directory=" git-per-dir-ignore-file))
+ (git-parse-ls-files status 'unknown)))
+ (git-refresh-files)
+ (git-refresh-ewoc-hf status)
+ ; move point to the current file name if any
+ (let ((node (and cur-name (git-find-status-file status cur-name))))
+ (when node (ewoc-goto-node status node)))))
+
+(defun git-status-quit ()
+ "Quit git-status mode."
+ (interactive)
+ (bury-buffer))
+
+;;;; Major Mode
+;;;; ------------------------------------------------------------
+
+(defvar git-status-mode-hook nil
+ "Run after `git-status-mode' is setup.")
+
+(defvar git-status-mode-map nil
+ "Keymap for git major mode.")
+
+(defvar git-status nil
+ "List of all files managed by the git-status mode.")
+
+(unless git-status-mode-map
+ (let ((map (make-keymap))
+ (diff-map (make-sparse-keymap)))
+ (suppress-keymap map)
+ (define-key map " " 'git-next-file)
+ (define-key map "a" 'git-add-file)
+ (define-key map "c" 'git-commit-file)
+ (define-key map "d" diff-map)
+ (define-key map "=" 'git-diff-file)
+ (define-key map "f" 'git-find-file)
+ (define-key map [RET] 'git-find-file)
+ (define-key map "g" 'git-refresh-status)
+ (define-key map "i" 'git-ignore-file)
+ (define-key map "l" 'git-log-file)
+ (define-key map "m" 'git-mark-file)
+ (define-key map "M" 'git-mark-all)
+ (define-key map "n" 'git-next-file)
+ (define-key map "p" 'git-prev-file)
+ (define-key map "q" 'git-status-quit)
+ (define-key map "r" 'git-remove-file)
+ (define-key map "R" 'git-resolve-file)
+ (define-key map "T" 'git-toggle-all-marks)
+ (define-key map "u" 'git-unmark-file)
+ (define-key map "U" 'git-revert-file)
+ (define-key map "v" 'git-view-file)
+ (define-key map "x" 'git-remove-handled)
+ (define-key map "\C-?" 'git-unmark-file-up)
+ (define-key map "\M-\C-?" 'git-unmark-all)
+ ; the diff submap
+ (define-key diff-map "b" 'git-diff-file-base)
+ (define-key diff-map "c" 'git-diff-file-combined)
+ (define-key diff-map "=" 'git-diff-file)
+ (define-key diff-map "e" 'git-diff-file-idiff)
+ (define-key diff-map "E" 'git-find-file-imerge)
+ (define-key diff-map "m" 'git-diff-file-mine)
+ (define-key diff-map "o" 'git-diff-file-other)
+ (setq git-status-mode-map map)))
+
+;; git mode should only run in the *git status* buffer
+(put 'git-status-mode 'mode-class 'special)
+
+(defun git-status-mode ()
+ "Major mode for interacting with Git.
+Commands:
+\\{git-status-mode-map}"
+ (kill-all-local-variables)
+ (buffer-disable-undo)
+ (setq mode-name "git status"
+ major-mode 'git-status-mode
+ goal-column 17
+ buffer-read-only t)
+ (use-local-map git-status-mode-map)
+ (let ((buffer-read-only nil))
+ (erase-buffer)
+ (let ((status (ewoc-create 'git-fileinfo-prettyprint "" "")))
+ (set (make-local-variable 'git-status) status))
+ (run-hooks 'git-status-mode-hook)))
+
+(defun git-status (dir)
+ "Entry point into git-status mode."
+ (interactive "DSelect directory: ")
+ (setq dir (git-get-top-dir dir))
+ (if (file-directory-p (concat (file-name-as-directory dir) ".git"))
+ (let ((buffer (create-file-buffer (expand-file-name "*git-status*" dir))))
+ (switch-to-buffer buffer)
+ (git-status-mode)
+ (cd dir)
+ (git-refresh-status)
+ (goto-char (point-min)))
+ (message "%s is not a git working tree." dir)))
+
+(provide 'git)
+;;; git.el ends here
sub sys { system(@_) == 0 or croak $? }
sub git_addremove {
- system( "git-ls-files -z --others ".
+ system( "git-diff-files --name-only -z ".
+ " | git-update-index --remove -z --stdin; ".
+ "git-ls-files -z --others ".
"'--exclude-from=$GIT_DIR/$GIT_SVN/info/exclude'".
- "| git-update-index --add -z --stdin; ".
- "git-ls-files -z --deleted ".
- "| git-update-index --remove -z --stdin; ".
- "git-ls-files -z --modified".
- "| git-update-index -z --stdin") == 0 or croak $?
+ " | git-update-index --add -z --stdin; "
+ ) == 0 or croak $?
}
sub s_to_file {
--- /dev/null
+gitview(1)
+==========
+
+NAME
+----
+gitview - A GTK based repository browser for git
+
+SYNOPSIS
+--------
+'gitview' [options] [args]
+
+DESCRIPTION
+---------
+
+Dependencies
+
+* Python 2.4
+* PyGTK 2.8 or later
+* PyCairo 1.0 or later
+
+OPTIONS
+------
+ --without-diff
+ If the user doesn't want to list the commit diffs in the main window. This may speed up the repository browsing.
+
+ <args>
+ All the valid option for git-rev-list(1)
+
+EXAMPLES
+------
+ gitview v2.6.12.. include/scsi drivers/scsi
+ Show as the changes since version v2.6.12 that changed any file in the include/scsi
+ or drivers/scsi subdirectories
+
+ gitview --since=2.weeks.ago
+ Show the changes during the last two weeks
+
+
show_file('-', ce);
continue;
}
- changed = ce_match_stat(ce, &st);
+ changed = ce_match_stat(ce, &st, 0);
if (!changed && !diff_options.find_copies_harder)
continue;
oldmode = ntohl(ce->ce_mode);
}
return -1;
}
- changed = ce_match_stat(ce, &st);
+ changed = ce_match_stat(ce, &st, 0);
if (changed) {
mode = create_ce_mode(st.st_mode);
if (!trust_executable_bit &&
ce = active_cache[pos];
if ((lstat(name, &st) < 0) ||
!S_ISREG(st.st_mode) || /* careful! */
- ce_match_stat(ce, &st) ||
+ ce_match_stat(ce, &st, 0) ||
memcmp(sha1, ce->sha1, 20))
return 0;
/* we return 1 only when we can stat, it is a regular file,
strcpy(path + len, ce->name);
if (!lstat(path, &st)) {
- unsigned changed = ce_match_stat(ce, &st);
+ unsigned changed = ce_match_stat(ce, &st, 1);
if (!changed)
return 0;
if (!state->force) {
char git_default_email[MAX_GITNAME];
char git_default_name[MAX_GITNAME];
int trust_executable_bit = 1;
+int assume_unchanged = 0;
int only_use_symrefs = 0;
int repository_format_version = 0;
char git_commit_encoding[MAX_ENCODING_LENGTH] = "utf-8";
#!/bin/sh
#
-#
+# Copyright (c) 2005, 2006 Junio C Hamano
USAGE='[--signoff] [--dotest=<dir>] [--utf8] [--binary] [--3way] <mbox>
or, when resuming [--skip | --resolved]'
. git-sh-setup
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
stop_here () {
echo "$1" >"$dotest/next"
exit 1
USAGE='[-u] [-k] [-q] [-m] (-c .dotest/<num> | mbox) [signoff]'
. git-sh-setup
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
keep_subject= query_apply= continue= utf8= resume=t
while case "$#" in 0) break ;; esac
do
}
# update the index with all the changes we got
+ system('git-diff-files --name-only -z | '.
+ 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
system('git-ls-files --others -z | '.
'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
- system('git-ls-files --deleted -z | '.
- 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
- system('git-ls-files -z | '.
- 'git-update-index -z --stdin') == 0 or die "$! $?\n";
return 1;
}
# imports don't give us good info
# on added files. Shame on them
if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
- system('git-ls-files --others -z | '.
- 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
system('git-ls-files --deleted -z | '.
'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
+ system('git-ls-files --others -z | '.
+ 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
}
# TODO: handle removed_directories and renamed_directories:
-
- if (my $add = $ps->{new_files}) {
- while (@$add) {
- my @slice = splice(@$add, 0, 100);
- system('git-update-index','--add','--',@slice) == 0 or
- die "Error in git-update-index --add: $! $?\n";
- }
- }
-
+
if (my $del = $ps->{removed_files}) {
unlink @$del;
while (@$del) {
}
}
+ if (my $add = $ps->{new_files}) {
+ while (@$add) {
+ my @slice = splice(@$add, 0, 100);
+ system('git-update-index','--add','--',@slice) == 0 or
+ die "Error in git-update-index --add: $! $?\n";
+ }
+ }
+
if (my $mod = $ps->{modified_files}) {
while (@$mod) {
my @slice = splice(@$mod, 0, 100);
[ -e "$dir" ] && echo "$dir already exists." && usage
mkdir -p "$dir" &&
D=$(cd "$dir" && pwd) &&
+trap 'err=$?; rm -r $D; exit $err' exit
case "$bare" in
yes) GIT_DIR="$D" ;;
*) GIT_DIR="$D/.git" ;;
fi &&
rm -f "$GIT_DIR/objects/sample" &&
cd "$repo" &&
- find objects -depth -print | cpio -puamd$l "$GIT_DIR/" || exit 1
+ find objects -depth -print | cpio -pumd$l "$GIT_DIR/" || exit 1
;;
yes)
mkdir -p "$GIT_DIR/objects/info"
git checkout
esac
fi
+
+trap - exit
+
}
}
}
+ return undef;
}
sub file {
my($self,$fn,$rev) = @_;
$self->_file($fn,$rev) and $res = $self->_line($fh);
if (!defined $res) {
- # retry
+ print STDERR "Server has gone away while fetching $fn $rev, retrying...\n";
+ truncate $fh, 0;
$self->conn();
- $self->_file($fn,$rev)
- or die "No file command send\n";
+ $self->_file($fn,$rev) or die "No file command send";
$res = $self->_line($fh);
- die "No input: $fn $rev\n" unless defined $res;
+ die "Retry failed" unless defined $res;
}
close ($fh);
- if ($res eq '') {
- die "Looks like the server has gone away while fetching $fn $rev -- exiting!";
- }
-
return ($name, $res);
}
return $val;
}
-sub mergebase {
- my ($other) = @_;
+sub current_branch {
my $fh;
- open $fh, '-|', 'git-merge-base', '--all', 'HEAD', $other or die "$!";
- my (@mb) = map { chomp; $_ } <$fh>;
- close $fh or die "$!";
- return @mb;
+ open $fh, '-|', 'git-symbolic-ref', 'HEAD' or die "$!";
+ my ($bra) = <$fh>;
+ chomp($bra);
+ $bra =~ s|^refs/heads/||;
+ if ($bra ne 'master') {
+ $bra = " into $bra";
+ } else {
+ $bra = "";
+ }
+
+ return $bra;
}
sub shortlog {
- my ($tip, $limit, @base) = @_;
+ my ($tip, $limit) = @_;
my ($fh, @result);
open $fh, '-|', ('git-log', "--max-count=$limit", '--topo-order',
- '--pretty=oneline', $tip, map { "^$_" } @base)
+ '--pretty=oneline', $tip, '^HEAD')
or die "$!";
while (<$fh>) {
s/^[0-9a-f]{40}\s+//;
}
push @msg, $this;
}
-print "Merge ", join("; ", @msg), "\n";
+
+my $into = current_branch();
+
+print "Merge ", join("; ", @msg), $into, "\n";
if (!repoconfig) {
exit(0);
for (@origin) {
my ($sha1, $name) = @$_;
- my @mb = mergebase($sha1);
- my @log = shortlog($sha1, $limit + 1, @mb);
+ my @log = shortlog($sha1, $limit + 1);
if ($limit + 1 <= @log) {
print "\n* $name: (" . scalar(@log) . " commits)\n";
}
all_strategies='recursive octopus resolve stupid ours'
default_strategies='recursive'
use_strategies=
+if test "@@NO_PYTHON@@"; then
+ all_strategies='resolve octopus stupid ours'
+ default_strategies='resolve'
+fi
dropsave() {
rm -f -- "$GIT_DIR/MERGE_HEAD" "$GIT_DIR/MERGE_MSG" \
1,*,)
# We are not doing octopus, not fast forward, and have only
# one common. See if it is really trivial.
+ git var GIT_COMMITTER_IDENT >/dev/null || exit
+
echo "Trying really trivial in-index merge..."
git-update-index --refresh 2>/dev/null
if git-read-tree --trivial -m -u $common $head "$1" &&
;;
esac
+# We are going to make a new commit.
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
case "$use_strategies" in
'')
case "$#" in
$dst = shift @dstArgs;
$bad = "";
+ for ($src, $dst) {
+ # Be nicer to end-users by doing ".//a/./b/.//./c" ==> "a/b/c"
+ s|^\./||;
+ s|/\./|/| while (m|/\./|);
+ s|//+|/|g;
+ # Also "a/b/../c" ==> "a/c"
+ 1 while (s,(^|/)[^/]+/\.\./,$1,);
+ }
+
if ($opt_v) {
print "Checking rename of '$src' to '$dst'\n";
}
# Copyright (c) 2005 Junio C Hamano.
#
-USAGE='<upstream> [<head>]'
+USAGE='[--onto <newbase>] <upstream> [<branch>]'
+LONG_USAGE='If <branch> is specified, switch to that branch first. Then,
+extract commits in the current branch that are not in <upstream>,
+and reconstruct the current on top of <upstream>, discarding the original
+development history. If --onto <newbase> is specified, the history is
+reconstructed on top of <newbase>, instead of <upstream>. For example,
+while on "topic" branch:
+
+ A---B---C topic
+ /
+ D---E---F---G master
+
+ $ '"$0"' --onto master~1 master topic
+
+would rewrite the history to look like this:
+
+
+ A'\''--B'\''--C'\'' topic
+ /
+ D---E---F---G master
+'
+
. git-sh-setup
-case $# in 1|2) ;; *) usage ;; esac
+unset newbase
+while case "$#" in 0) break ;; esac
+do
+ case "$1" in
+ --onto)
+ test 2 -le "$#" || usage
+ newbase="$2"
+ shift
+ ;;
+ -*)
+ usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+done
# Make sure we do not have .dotest
if mkdir .dotest
;;
esac
-# The other head is given. Make sure it is valid.
-other=$(git-rev-parse --verify "$1^0") || usage
-
-# Make sure the branch to rebase is valid.
-head=$(git-rev-parse --verify "${2-HEAD}^0") || exit
+# The upstream head must be given. Make sure it is valid.
+upstream_name="$1"
+upstream=`git rev-parse --verify "${upstream_name}^0"` ||
+ die "invalid upsteram $upstream_name"
# If a hook exists, give it a chance to interrupt
if test -x "$GIT_DIR/hooks/pre-rebase"
# If the branch to rebase is given, first switch to it.
case "$#" in
2)
+ branch_name="$2"
git-checkout "$2" || usage
+ ;;
+*)
+ branch_name=`git symbolic-ref HEAD` || die "No current branch"
+ branch_name=`expr "$branch_name" : 'refs/heads/\(.*\)'`
+ ;;
esac
+branch=$(git-rev-parse --verify "${branch_name}^0") || exit
-mb=$(git-merge-base "$other" "$head")
+# Make sure the branch to rebase onto is valid.
+onto_name=${newbase-"$upstream_name"}
+onto=$(git-rev-parse --verify "${onto_name}^0") || exit
-# Check if we are already based on $other.
-if test "$mb" = "$other"
+# Now we are rebasing commits $upstream..$branch on top of $onto
+
+# Check if we are already based on $onto, but this should be
+# done only when upstream and onto are the same.
+if test "$upstream" = "onto"
then
- echo >&2 "Current branch `git-symbolic-ref HEAD` is up to date."
- exit 0
+ mb=$(git-merge-base "$onto" "$branch")
+ if test "$mb" = "$onto"
+ then
+ echo >&2 "Current branch $branch_name is up to date."
+ exit 0
+ fi
fi
-# Rewind the head to "$other"
-git-reset --hard "$other"
+# Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
+git-reset --hard "$onto"
-# If the $other is a proper descendant of the tip of the branch, then
+# If the $onto is a proper descendant of the tip of the branch, then
# we just fast forwarded.
-if test "$mb" = "$head"
+if test "$mb" = "$onto"
then
- echo >&2 "Fast-forwarded $head to $other."
+ echo >&2 "Fast-forwarded $branch to $newbase."
exit 0
fi
-git-format-patch -k --stdout --full-index "$other" ORIG_HEAD |
+git-format-patch -k --stdout --full-index "$upstream" ORIG_HEAD |
git am --binary -3 -k
# it is ok if this fails -- it may already
# have been culled by checkout-index.
unlink $_;
+ while (s|/[^/]*$||) {
+ rmdir($_) or last;
+ }
}
}
' $tmp-exists
;;
esac
+# We are going to make a new commit.
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
# Find an optimum merge base if there are more than one candidates.
LF='
'
#!/bin/sh
# Copyright (c) 2005 Linus Torvalds
-USAGE='[-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <tagname> [<head>]'
+USAGE='-l [<pattern>] | [-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <tagname> [<head>]'
SUBDIRECTORY_OK='Yes'
. git-sh-setup
force=
message=
username=
+list=
while case "$#" in 0) break ;; esac
do
case "$1" in
-f)
force=1
;;
+ -l)
+ cd "$GIT_DIR/refs" &&
+ case "$#" in
+ 1)
+ find tags -type f -print ;;
+ *)
+ shift
+ find tags -type f -print | grep "$@" ;;
+ esac
+ exit $?
+ ;;
-m)
annotate=1
shift
return offset;
}
+static const char au_env[] = "GIT_AUTHOR_NAME";
+static const char co_env[] = "GIT_COMMITTER_NAME";
+static const char *env_hint =
+"\n*** Environment problem:\n"
+"*** Your name cannot be determined from your system services (gecos).\n"
+"*** You would need to set %s and %s\n"
+"*** environment variables; otherwise you won't be able to perform\n"
+"*** certain operations because of \"empty ident\" errors.\n"
+"*** Alternatively, you can use user.name configuration variable.\n\n";
+
static const char *get_ident(const char *name, const char *email,
- const char *date_str)
+ const char *date_str, int error_on_no_name)
{
static char buffer[1000];
char date[50];
if (!email)
email = git_default_email;
- if (!*name || !*email)
- die("empty ident %s <%s> not allowed",
- name, email);
+ if (!*name) {
+ if (name == git_default_name && env_hint) {
+ fprintf(stderr, env_hint, au_env, co_env);
+ env_hint = NULL; /* warn only once, for "git-var -l" */
+ }
+ if (error_on_no_name)
+ die("empty ident %s <%s> not allowed", name, email);
+ }
strcpy(date, git_default_date);
if (date_str)
return buffer;
}
-const char *git_author_info(void)
+const char *git_author_info(int error_on_no_name)
{
return get_ident(getenv("GIT_AUTHOR_NAME"),
getenv("GIT_AUTHOR_EMAIL"),
- getenv("GIT_AUTHOR_DATE"));
+ getenv("GIT_AUTHOR_DATE"),
+ error_on_no_name);
}
-const char *git_committer_info(void)
+const char *git_committer_info(int error_on_no_name)
{
return get_ident(getenv("GIT_COMMITTER_NAME"),
getenv("GIT_COMMITTER_EMAIL"),
- getenv("GIT_COMMITTER_DATE"));
+ getenv("GIT_COMMITTER_DATE"),
+ error_on_no_name);
}
static int show_modified = 0;
static int show_killed = 0;
static int show_other_directories = 0;
+static int show_valid_bit = 0;
static int line_terminator = '\n';
static int prefix_len = 0, prefix_offset = 0;
if (pathspec && !match(pathspec, ps_matched, ce->name, len))
return;
+ if (tag && *tag && show_valid_bit &&
+ (ce->ce_flags & htons(CE_VALID))) {
+ static char alttag[4];
+ memcpy(alttag, tag, 3);
+ if (isalpha(tag[0]))
+ alttag[0] = tolower(tag[0]);
+ else if (tag[0] == '?')
+ alttag[0] = '!';
+ else {
+ alttag[0] = 'v';
+ alttag[1] = tag[0];
+ alttag[2] = ' ';
+ alttag[3] = 0;
+ }
+ tag = alttag;
+ }
+
if (!show_stage) {
fputs(tag, stdout);
write_name_quoted("", 0, ce->name + offset,
err = lstat(ce->name, &st);
if (show_deleted && err)
show_ce_entry(tag_removed, ce);
- if (show_modified && ce_modified(ce, &st))
+ if (show_modified && ce_modified(ce, &st, 0))
show_ce_entry(tag_modified, ce);
}
}
}
static const char ls_files_usage[] =
- "git-ls-files [-z] [-t] (--[cached|deleted|others|stage|unmerged|killed|modified])* "
+ "git-ls-files [-z] [-t] [-v] (--[cached|deleted|others|stage|unmerged|killed|modified])* "
"[ --ignored ] [--exclude=<pattern>] [--exclude-from=<file>] "
"[ --exclude-per-directory=<filename> ] [--full-name] [--] [<file>]*";
line_terminator = 0;
continue;
}
- if (!strcmp(arg, "-t")) {
+ if (!strcmp(arg, "-t") || !strcmp(arg, "-v")) {
tag_cached = "H ";
tag_unmerged = "M ";
tag_removed = "R ";
tag_modified = "C ";
tag_other = "? ";
tag_killed = "K ";
+ if (arg[1] == 'v')
+ show_valid_bit = 1;
continue;
}
if (!strcmp(arg, "-c") || !strcmp(arg, "--cached")) {
--- /dev/null
+#include "cache.h"
+#include "diff.h"
+
+static const char merge_tree_usage[] = "git-merge-tree <base-tree> <branch1> <branch2>";
+static int resolve_directories = 1;
+
+static void merge_trees(struct tree_desc t[3], const char *base);
+
+static void *fill_tree_descriptor(struct tree_desc *desc, const unsigned char *sha1)
+{
+ unsigned long size = 0;
+ void *buf = NULL;
+
+ if (sha1) {
+ buf = read_object_with_reference(sha1, "tree", &size, NULL);
+ if (!buf)
+ die("unable to read tree %s", sha1_to_hex(sha1));
+ }
+ desc->size = size;
+ desc->buf = buf;
+ return buf;
+}
+
+struct name_entry {
+ const unsigned char *sha1;
+ const char *path;
+ unsigned int mode;
+ int pathlen;
+};
+
+static void entry_clear(struct name_entry *a)
+{
+ memset(a, 0, sizeof(*a));
+}
+
+static int entry_compare(struct name_entry *a, struct name_entry *b)
+{
+ return base_name_compare(
+ a->path, a->pathlen, a->mode,
+ b->path, b->pathlen, b->mode);
+}
+
+static void entry_extract(struct tree_desc *t, struct name_entry *a)
+{
+ a->sha1 = tree_entry_extract(t, &a->path, &a->mode);
+ a->pathlen = strlen(a->path);
+}
+
+/* An empty entry never compares same, not even to another empty entry */
+static int same_entry(struct name_entry *a, struct name_entry *b)
+{
+ return a->sha1 &&
+ b->sha1 &&
+ !memcmp(a->sha1, b->sha1, 20) &&
+ a->mode == b->mode;
+}
+
+static const char *sha1_to_hex_zero(const unsigned char *sha1)
+{
+ if (sha1)
+ return sha1_to_hex(sha1);
+ return "0000000000000000000000000000000000000000";
+}
+
+static void resolve(const char *base, struct name_entry *branch1, struct name_entry *result)
+{
+ char branch1_sha1[50];
+
+ /* If it's already branch1, don't bother showing it */
+ if (!branch1)
+ return;
+ memcpy(branch1_sha1, sha1_to_hex_zero(branch1->sha1), 41);
+
+ printf("0 %06o->%06o %s->%s %s%s\n",
+ branch1->mode, result->mode,
+ branch1_sha1, sha1_to_hex_zero(result->sha1),
+ base, result->path);
+}
+
+static int unresolved_directory(const char *base, struct name_entry n[3])
+{
+ int baselen;
+ char *newbase;
+ struct name_entry *p;
+ struct tree_desc t[3];
+ void *buf0, *buf1, *buf2;
+
+ if (!resolve_directories)
+ return 0;
+ p = n;
+ if (!p->mode) {
+ p++;
+ if (!p->mode)
+ p++;
+ }
+ if (!S_ISDIR(p->mode))
+ return 0;
+ baselen = strlen(base);
+ newbase = xmalloc(baselen + p->pathlen + 2);
+ memcpy(newbase, base, baselen);
+ memcpy(newbase + baselen, p->path, p->pathlen);
+ memcpy(newbase + baselen + p->pathlen, "/", 2);
+
+ buf0 = fill_tree_descriptor(t+0, n[0].sha1);
+ buf1 = fill_tree_descriptor(t+1, n[1].sha1);
+ buf2 = fill_tree_descriptor(t+2, n[2].sha1);
+ merge_trees(t, newbase);
+
+ free(buf0);
+ free(buf1);
+ free(buf2);
+ free(newbase);
+ return 1;
+}
+
+static void unresolved(const char *base, struct name_entry n[3])
+{
+ if (unresolved_directory(base, n))
+ return;
+ if (n[0].sha1)
+ printf("1 %06o %s %s%s\n", n[0].mode, sha1_to_hex(n[0].sha1), base, n[0].path);
+ if (n[1].sha1)
+ printf("2 %06o %s %s%s\n", n[1].mode, sha1_to_hex(n[1].sha1), base, n[1].path);
+ if (n[2].sha1)
+ printf("3 %06o %s %s%s\n", n[2].mode, sha1_to_hex(n[2].sha1), base, n[2].path);
+}
+
+typedef void (*traverse_callback_t)(int n, unsigned long mask, struct name_entry *entry, const char *base);
+
+static void traverse_trees(int n, struct tree_desc *t, const char *base, traverse_callback_t callback)
+{
+ struct name_entry *entry = xmalloc(n*sizeof(*entry));
+
+ for (;;) {
+ struct name_entry entry[3];
+ unsigned long mask = 0;
+ int i, last;
+
+ last = -1;
+ for (i = 0; i < n; i++) {
+ if (!t[i].size)
+ continue;
+ entry_extract(t+i, entry+i);
+ if (last >= 0) {
+ int cmp = entry_compare(entry+i, entry+last);
+
+ /*
+ * Is the new name bigger than the old one?
+ * Ignore it
+ */
+ if (cmp > 0)
+ continue;
+ /*
+ * Is the new name smaller than the old one?
+ * Ignore all old ones
+ */
+ if (cmp < 0)
+ mask = 0;
+ }
+ mask |= 1ul << i;
+ last = i;
+ }
+ if (!mask)
+ break;
+
+ /*
+ * Update the tree entries we've walked, and clear
+ * all the unused name-entries.
+ */
+ for (i = 0; i < n; i++) {
+ if (mask & (1ul << i)) {
+ update_tree_entry(t+i);
+ continue;
+ }
+ entry_clear(entry + i);
+ }
+ callback(n, mask, entry, base);
+ }
+ free(entry);
+}
+
+/*
+ * Merge two trees together (t[1] and t[2]), using a common base (t[0])
+ * as the origin.
+ *
+ * This walks the (sorted) trees in lock-step, checking every possible
+ * name. Note that directories automatically sort differently from other
+ * files (see "base_name_compare"), so you'll never see file/directory
+ * conflicts, because they won't ever compare the same.
+ *
+ * IOW, if a directory changes to a filename, it will automatically be
+ * seen as the directory going away, and the filename being created.
+ *
+ * Think of this as a three-way diff.
+ *
+ * The output will be either:
+ * - successful merge
+ * "0 mode sha1 filename"
+ * NOTE NOTE NOTE! FIXME! We really really need to walk the index
+ * in parallel with this too!
+ *
+ * - conflict:
+ * "1 mode sha1 filename"
+ * "2 mode sha1 filename"
+ * "3 mode sha1 filename"
+ * where not all of the 1/2/3 lines may exist, of course.
+ *
+ * The successful merge rules are the same as for the three-way merge
+ * in git-read-tree.
+ */
+static void threeway_callback(int n, unsigned long mask, struct name_entry *entry, const char *base)
+{
+ /* Same in both? */
+ if (same_entry(entry+1, entry+2)) {
+ if (entry[0].sha1) {
+ resolve(base, NULL, entry+1);
+ return;
+ }
+ }
+
+ if (same_entry(entry+0, entry+1)) {
+ if (entry[2].sha1 && !S_ISDIR(entry[2].mode)) {
+ resolve(base, entry+1, entry+2);
+ return;
+ }
+ }
+
+ if (same_entry(entry+0, entry+2)) {
+ if (entry[1].sha1 && !S_ISDIR(entry[1].mode)) {
+ resolve(base, NULL, entry+1);
+ return;
+ }
+ }
+
+ unresolved(base, entry);
+}
+
+static void merge_trees(struct tree_desc t[3], const char *base)
+{
+ traverse_trees(3, t, base, threeway_callback);
+}
+
+static void *get_tree_descriptor(struct tree_desc *desc, const char *rev)
+{
+ unsigned char sha1[20];
+ void *buf;
+
+ if (get_sha1(rev, sha1) < 0)
+ die("unknown rev %s", rev);
+ buf = fill_tree_descriptor(desc, sha1);
+ if (!buf)
+ die("%s is not a tree", rev);
+ return buf;
+}
+
+int main(int argc, char **argv)
+{
+ struct tree_desc t[3];
+ void *buf1, *buf2, *buf3;
+
+ if (argc < 4)
+ usage(merge_tree_usage);
+
+ buf1 = get_tree_descriptor(t+0, argv[1]);
+ buf2 = get_tree_descriptor(t+1, argv[2]);
+ buf3 = get_tree_descriptor(t+2, argv[3]);
+ merge_trees(t, "");
+ free(buf1);
+ free(buf2);
+ free(buf3);
+ return 0;
+}
ce->ce_uid = htonl(st->st_uid);
ce->ce_gid = htonl(st->st_gid);
ce->ce_size = htonl(st->st_size);
+
+ if (assume_unchanged)
+ ce->ce_flags |= htons(CE_VALID);
}
static int ce_compare_data(struct cache_entry *ce, struct stat *st)
return changed;
}
-int ce_match_stat(struct cache_entry *ce, struct stat *st)
+int ce_match_stat(struct cache_entry *ce, struct stat *st, int ignore_valid)
{
- unsigned int changed = ce_match_stat_basic(ce, st);
+ unsigned int changed;
+
+ /*
+ * If it's marked as always valid in the index, it's
+ * valid whatever the checked-out copy says.
+ */
+ if (!ignore_valid && (ce->ce_flags & htons(CE_VALID)))
+ return 0;
+
+ changed = ce_match_stat_basic(ce, st);
/*
* Within 1 second of this sequence:
* effectively mean we can make at most one commit per second,
* which is not acceptable. Instead, we check cache entries
* whose mtime are the same as the index file timestamp more
- * careful than others.
+ * carefully than others.
*/
if (!changed &&
index_file_timestamp &&
return changed;
}
-int ce_modified(struct cache_entry *ce, struct stat *st)
+int ce_modified(struct cache_entry *ce, struct stat *st, int really)
{
int changed, changed_fs;
- changed = ce_match_stat(ce, st);
+ changed = ce_match_stat(ce, st, really);
if (!changed)
return 0;
/*
return -1;
if (len1 > len2)
return 1;
+
+ /* Compare stages */
+ flags1 &= CE_STAGEMASK;
+ flags2 &= CE_STAGEMASK;
+
if (flags1 < flags2)
return -1;
if (flags1 > flags2)
int ok_to_add = option & ADD_CACHE_OK_TO_ADD;
int ok_to_replace = option & ADD_CACHE_OK_TO_REPLACE;
int skip_df_check = option & ADD_CACHE_SKIP_DFCHECK;
+
pos = cache_name_pos(ce->name, ntohs(ce->ce_flags));
/* existing match? Just replace it. */
return;
if (!lstat(ce->name, &st)) {
- unsigned changed = ce_match_stat(ce, &st);
+ unsigned changed = ce_match_stat(ce, &st, 1);
if (!changed)
return;
errno = 0;
" ordering output:\n"
" --merge-order [ --show-breaks ]\n"
" --topo-order\n"
+" --date-order\n"
" formatting output:\n"
" --parents\n"
-" --objects\n"
+" --objects | --objects-edge\n"
" --unpacked\n"
" --header | --pretty\n"
" --abbrev=nr | --no-abbrev\n"
static int tag_objects = 0;
static int tree_objects = 0;
static int blob_objects = 0;
+static int edge_hint = 0;
static int verbose_header = 0;
static int abbrev = DEFAULT_ABBREV;
static int show_parents = 0;
static int show_breaks = 0;
static int stop_traversal = 0;
static int topo_order = 0;
+static int lifo = 1;
static int no_merges = 0;
static const char **paths = NULL;
static int remove_empty_trees = 0;
return best;
}
+static void mark_edge_parents_uninteresting(struct commit *commit)
+{
+ struct commit_list *parents;
+
+ for (parents = commit->parents; parents; parents = parents->next) {
+ struct commit *parent = parents->item;
+ if (!(parent->object.flags & UNINTERESTING))
+ continue;
+ mark_tree_uninteresting(parent->tree);
+ if (edge_hint)
+ printf("-%s\n", sha1_to_hex(parent->object.sha1));
+ }
+}
+
static void mark_edges_uninteresting(struct commit_list *list)
{
for ( ; list; list = list->next) {
- struct commit_list *parents = list->item->parents;
+ struct commit *commit = list->item;
- for ( ; parents; parents = parents->next) {
- struct commit *commit = parents->item;
- if (commit->object.flags & UNINTERESTING)
- mark_tree_uninteresting(commit->tree);
+ if (commit->object.flags & UNINTERESTING) {
+ mark_tree_uninteresting(commit->tree);
+ continue;
}
+ mark_edge_parents_uninteresting(commit);
}
}
blob_objects = 1;
continue;
}
+ if (!strcmp(arg, "--objects-edge")) {
+ tag_objects = 1;
+ tree_objects = 1;
+ blob_objects = 1;
+ edge_hint = 1;
+ continue;
+ }
if (!strcmp(arg, "--unpacked")) {
unpacked = 1;
limited = 1;
}
if (!strcmp(arg, "--topo-order")) {
topo_order = 1;
+ lifo = 1;
+ limited = 1;
+ continue;
+ }
+ if (!strcmp(arg, "--date-order")) {
+ topo_order = 1;
+ lifo = 0;
limited = 1;
continue;
}
if (limited)
list = limit_list(list);
if (topo_order)
- sort_in_topological_order(&list);
+ sort_in_topological_order(&list, lifo);
show_commit_list(list);
} else {
#ifndef NO_OPENSSL
"--min-age=",
"--no-merges",
"--objects",
+ "--objects-edge",
"--parents",
"--pretty",
"--show-breaks",
"--sparse",
"--topo-order",
+ "--date-order",
"--unpacked",
NULL
};
continue;
}
if (!strcmp(arg, "--short") ||
- !strncmp(arg, "--short=", 9)) {
+ !strncmp(arg, "--short=", 8)) {
filter &= ~(DO_FLAGS|DO_NOREV);
verify = 1;
abbrev = DEFAULT_ABBREV;
- if (arg[8] == '=')
- abbrev = strtoul(arg + 9, NULL, 10);
+ if (arg[7] == '=')
+ abbrev = strtoul(arg + 8, NULL, 10);
if (abbrev < MINIMUM_ABBREV)
abbrev = MINIMUM_ABBREV;
else if (40 <= abbrev)
sprintf(path, "%s/pack", objdir);
len = strlen(path);
dir = opendir(path);
- if (!dir)
+ if (!dir) {
+ fprintf(stderr, "unable to open object pack directory: %s: %s\n", path, strerror(errno));
return;
+ }
path[len++] = '/';
while ((de = readdir(dir)) != NULL) {
int namelen = strlen(de->d_name);
int num_rev, i, extra = 0;
int all_heads = 0, all_tags = 0;
int all_mask, all_revs;
+ int lifo = 1;
char head_path[128];
const char *head_path_p;
int head_path_len;
int no_name = 0;
int sha1_name = 0;
int shown_merge_point = 0;
- int topo_order = 0;
int with_current_branch = 0;
int head_at = -1;
else if (!strcmp(arg, "--independent"))
independent = 1;
else if (!strcmp(arg, "--topo-order"))
- topo_order = 1;
+ lifo = 1;
+ else if (!strcmp(arg, "--date-order"))
+ lifo = 0;
else
usage(show_branch_usage);
ac--; av++;
exit(0);
/* Sort topologically */
- if (topo_order)
- sort_in_topological_order(&seen);
+ sort_in_topological_order(&seen, lifo);
/* Give names to commits */
if (!sha1_name && !no_name)
TAR ?= $(TAR)
# Shell quote;
-# Result of this needs to be placed inside ''
-shq = $(subst ','\'',$(1))
-# This has surrounding ''
-shellquote = '$(call shq,$(1))'
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
T = $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)
+ifdef NO_PYTHON
+ GIT_TEST_OPTS += --no-python
+endif
+
all: $(T) clean
$(T):
- @echo "*** $@ ***"; $(call shellquote,$(SHELL_PATH)) $@ $(GIT_TEST_OPTS)
+ @echo "*** $@ ***"; '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS)
clean:
rm -fr trash
. ./test-lib.sh
-"$PYTHON" -c 'import subprocess' || {
+test "$no_python" || "$PYTHON" -c 'import subprocess' || {
echo >&2 'Your python seem to lack "subprocess" module.
Please check INSTALL document.'
exit 1
test_description='Test criss-cross merge'
. ./test-lib.sh
+if test "$no_python"; then
+ echo "Skipping: no python => no recursive merge"
+ test_done
+ exit 0
+fi
+
test_expect_success 'prepare repository' \
'echo "1
2
test_description='Merge-recursive merging renames'
. ./test-lib.sh
+if test "$no_python"; then
+ echo "Skipping: no python => no recursive merge"
+ test_done
+ exit 0
+fi
+
test_expect_success setup \
'
cat >A <<\EOF &&
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2006 Shawn Pearce
+#
+
+test_description='git-reset should cull empty subdirs'
+. ./test-lib.sh
+
+test_expect_success \
+ 'creating initial files' \
+ 'mkdir path0 &&
+ cp ../../COPYING path0/COPYING &&
+ git-add path0/COPYING &&
+ git-commit -m add -a'
+
+test_expect_success \
+ 'creating second files' \
+ 'mkdir path1 &&
+ mkdir path1/path2 &&
+ cp ../../COPYING path1/path2/COPYING &&
+ cp ../../COPYING path1/COPYING &&
+ cp ../../COPYING COPYING &&
+ cp ../../COPYING path0/COPYING-TOO &&
+ git-add path1/path2/COPYING &&
+ git-add path1/COPYING &&
+ git-add COPYING &&
+ git-add path0/COPYING-TOO &&
+ git-commit -m change -a'
+
+test_expect_success \
+ 'resetting tree HEAD^' \
+ 'git-reset --hard HEAD^'
+
+test_expect_success \
+ 'checking initial files exist after rewind' \
+ 'test -d path0 &&
+ test -f path0/COPYING'
+
+test_expect_failure \
+ 'checking lack of path1/path2/COPYING' \
+ 'test -f path1/path2/COPYING'
+
+test_expect_failure \
+ 'checking lack of path1/COPYING' \
+ 'test -f path1/COPYING'
+
+test_expect_failure \
+ 'checking lack of COPYING' \
+ 'test -f COPYING'
+
+test_expect_failure \
+ 'checking checking lack of path1/COPYING-TOO' \
+ 'test -f path0/COPYING-TOO'
+
+test_expect_failure \
+ 'checking lack of path1/path2' \
+ 'test -d path1/path2'
+
+test_expect_failure \
+ 'checking lack of path1' \
+ 'test -d path1'
+
+test_done
exit 0 ;;
-v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
verbose=t; shift ;;
+ --no-python)
+ no_python=t; shift ;;
*)
break ;;
esac
fi
}
+# Most tests can use the created repository, but some amy need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+ test "$#" = 1 ||
+ error "bug in the test script: not 1 parameter to test-create-repo"
+ owd=`pwd`
+ repo="$1"
+ mkdir "$repo"
+ cd "$repo" || error "Cannot setup test environment"
+ "$GIT_EXEC_PATH/git" init-db --template=$GIT_EXEC_PATH/templates/blt/ 2>/dev/null ||
+ error "cannot run git init-db -- have you built things yet?"
+ mv .git/hooks .git/hooks-disabled
+ cd "$owd"
+}
+
test_done () {
trap - exit
case "$test_failure" in
# Test repository
test=trash
rm -fr "$test"
-mkdir "$test"
-cd "$test" || error "Cannot setup test environment"
-"$GIT_EXEC_PATH/git" init-db --template=../../templates/blt/ 2>/dev/null ||
-error "cannot run git init-db -- have you built things yet?"
-
-mv .git/hooks .git/hooks-disabled
+test_create_repo $test
+cd "$test"
static int info_only;
static int force_remove;
static int verbose;
+static int mark_valid_only = 0;
+#define MARK_VALID 1
+#define UNMARK_VALID 2
+
/* Three functions to allow overloaded pointer return; see linux/err.h */
static inline void *ERR_PTR(long error)
va_end(vp);
}
+static int mark_valid(const char *path)
+{
+ int namelen = strlen(path);
+ int pos = cache_name_pos(path, namelen);
+ if (0 <= pos) {
+ switch (mark_valid_only) {
+ case MARK_VALID:
+ active_cache[pos]->ce_flags |= htons(CE_VALID);
+ break;
+ case UNMARK_VALID:
+ active_cache[pos]->ce_flags &= ~htons(CE_VALID);
+ break;
+ }
+ active_cache_changed = 1;
+ return 0;
+ }
+ return -1;
+}
+
static int add_file_to_cache(const char *path)
{
int size, namelen, option, status;
ce = xmalloc(size);
memset(ce, 0, size);
memcpy(ce->name, path, namelen);
+ ce->ce_flags = htons(namelen);
fill_stat_cache_info(ce, &st);
ce->ce_mode = create_ce_mode(st.st_mode);
if (0 <= pos)
ce->ce_mode = active_cache[pos]->ce_mode;
}
- ce->ce_flags = htons(namelen);
if (index_path(ce->sha1, path, &st, !info_only))
return -1;
* For example, you'd want to do this after doing a "git-read-tree",
* to link up the stat cache details with the proper files.
*/
-static struct cache_entry *refresh_entry(struct cache_entry *ce)
+static struct cache_entry *refresh_entry(struct cache_entry *ce, int really)
{
struct stat st;
struct cache_entry *updated;
if (lstat(ce->name, &st) < 0)
return ERR_PTR(-errno);
- changed = ce_match_stat(ce, &st);
- if (!changed)
- return NULL;
+ changed = ce_match_stat(ce, &st, really);
+ if (!changed) {
+ if (really && assume_unchanged &&
+ !(ce->ce_flags & htons(CE_VALID)))
+ ; /* mark this one VALID again */
+ else
+ return NULL;
+ }
- if (ce_modified(ce, &st))
+ if (ce_modified(ce, &st, really))
return ERR_PTR(-EINVAL);
size = ce_size(ce);
updated = xmalloc(size);
memcpy(updated, ce, size);
fill_stat_cache_info(updated, &st);
+
+ /* In this case, if really is not set, we should leave
+ * CE_VALID bit alone. Otherwise, paths marked with
+ * --no-assume-unchanged (i.e. things to be edited) will
+ * reacquire CE_VALID bit automatically, which is not
+ * really what we want.
+ */
+ if (!really && assume_unchanged && !(ce->ce_flags & htons(CE_VALID)))
+ updated->ce_flags &= ~htons(CE_VALID);
+
return updated;
}
-static int refresh_cache(void)
+static int refresh_cache(int really)
{
int i;
int has_errors = 0;
continue;
}
- new = refresh_entry(ce);
+ new = refresh_entry(ce, really);
if (!new)
continue;
if (IS_ERR(new)) {
if (not_new && PTR_ERR(new) == -ENOENT)
continue;
+ if (really && PTR_ERR(new) == -EINVAL) {
+ /* If we are doing --really-refresh that
+ * means the index is not valid anymore.
+ */
+ ce->ce_flags &= ~htons(CE_VALID);
+ active_cache_changed = 1;
+ }
if (quiet)
continue;
printf("%s: needs update\n", ce->name);
memcpy(ce->name, path, len);
ce->ce_flags = create_ce_flags(len, stage);
ce->ce_mode = create_ce_mode(mode);
+ if (assume_unchanged)
+ ce->ce_flags |= htons(CE_VALID);
option = allow_add ? ADD_CACHE_OK_TO_ADD : 0;
option |= allow_replace ? ADD_CACHE_OK_TO_REPLACE : 0;
if (add_cache_entry(ce, option))
fprintf(stderr, "Ignoring path %s\n", path);
return;
}
+ if (mark_valid_only) {
+ if (mark_valid(p))
+ die("Unable to mark file %s", path);
+ return;
+ }
+
if (force_remove) {
if (remove_file_from_cache(p))
die("git-update-index: unable to remove %s", path);
continue;
}
if (!strcmp(path, "--refresh")) {
- has_errors |= refresh_cache();
+ has_errors |= refresh_cache(0);
+ continue;
+ }
+ if (!strcmp(path, "--really-refresh")) {
+ has_errors |= refresh_cache(1);
continue;
}
if (!strcmp(path, "--cacheinfo")) {
die("git-update-index: %s cannot chmod %s", path, argv[i]);
continue;
}
+ if (!strcmp(path, "--assume-unchanged")) {
+ mark_valid_only = MARK_VALID;
+ continue;
+ }
+ if (!strcmp(path, "--no-assume-unchanged")) {
+ mark_valid_only = UNMARK_VALID;
+ continue;
+ }
if (!strcmp(path, "--info-only")) {
info_only = 1;
continue;
static char *capabilities = "multi_ack thin-pack";
struct object *o = parse_object(sha1);
+ if (!o)
+ die("git-upload-pack: cannot find object %s:", sha1_to_hex(sha1));
+
if (capabilities)
packet_write(1, "%s %s%c%s\n", sha1_to_hex(sha1), refname,
0, capabilities);
struct git_var {
const char *name;
- const char *(*read)(void);
+ const char *(*read)(int);
};
static struct git_var git_vars[] = {
{ "GIT_COMMITTER_IDENT", git_committer_info },
{
struct git_var *ptr;
for(ptr = git_vars; ptr->read; ptr++) {
- printf("%s=%s\n", ptr->name, ptr->read());
+ printf("%s=%s\n", ptr->name, ptr->read(0));
}
}
val = NULL;
for(ptr = git_vars; ptr->read; ptr++) {
if (strcmp(var, ptr->name) == 0) {
- val = ptr->read();
+ val = ptr->read(1);
break;
}
}
funny = 0;
for (i = 0; i < entries; i++) {
struct cache_entry *ce = active_cache[i];
- if (ntohs(ce->ce_flags) & ~CE_NAMEMASK) {
+ if (ce_stage(ce)) {
if (10 < ++funny) {
fprintf(stderr, "...\n");
break;