doing when they write "Signed-off-by" line.
But the patch submission requirements are a lot more relaxed
-here, because the core GIT is thousand times smaller ;-). So
-here is only the relevant bits.
+here on the technical/contents front, because the core GIT is
+thousand times smaller ;-). So here is only the relevant bits.
(1) Make separate commits for logically separate changes.
Describe the technical detail of the change(s).
-If your description starts to get long, that's a sign that you
+If your description starts to get too long, that's a sign that you
probably need to split up your commit to finer grained pieces.
+Oh, another thing. I am picky about whitespaces. Make sure your
+changes do not trigger errors with the sample pre-commit hook shipped
+in templates/hooks--pre-commit.
-(2) Generate your patch using git/cogito out of your commits.
-git diff tools generate unidiff which is the preferred format.
+(2) Generate your patch using git tools out of your commits.
+
+git based diff tools (git, Cogito, and StGIT included) generate
+unidiff which is the preferred format.
+
You do not have to be afraid to use -M option to "git diff" or
"git format-patch", if your patch involves file renames. The
receiving end can handle them just fine.
which do not belong in a patch submission. Make sure to review
your patch after generating it, to ensure accuracy. Before
sending out, please make sure it cleanly applies to the "master"
-branch head.
+branch head. If you are preparing a work based on "next" branch,
+that is fine, but please mark it as such.
(3) Sending your patches.
-People on the git mailing list needs to be able to read and
+People on the git mailing list need to be able to read and
comment on the changes you are submitting. It is important for
a developer to be able to "quote" your changes, using standard
e-mail tools, so that they may comment on specific portions of
-your code. For this reason, all patches should be submitting
-e-mail "inline". WARNING: Be wary of your MUAs word-wrap
-corrupting your patch. Do not cut-n-paste your patch.
+your code. For this reason, all patches should be submited
+"inline". WARNING: Be wary of your MUAs word-wrap
+corrupting your patch. Do not cut-n-paste your patch; you can
+lose tabs that way if you are not careful.
-It is common convention to prefix your subject line with
+It is a common convention to prefix your subject line with
[PATCH]. This lets people easily distinguish patches from other
e-mail discussions.
path of the top-level directory relative to the current
directory (typically a sequence of "../", or an empty string).
+--git-dir::
+ Show `$GIT_DIR` if defined else show the path to the .git directory.
+
+--short, --short=number::
+ Instead of outputting the full SHA1 values of object names try to
+ abbriviate them to a shorter unique name. When no length is specified
+ 7 is used. The minimum length is 4.
+
--since=datestring, --after=datestring::
Parses the date string, and outputs corresponding
--max-age= parameter for git-rev-list command.
SYNOPSIS
--------
+[verse]
'git-tag' [-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <name> [<head>]
+'git-tag' -l [<pattern>]
DESCRIPTION
-----------
-Adds a 'tag' reference in .git/refs/tags/
+Adds a 'tag' reference in `.git/refs/tags/`
Unless `-f` is given, the tag must not yet exist in
`.git/refs/tags/` directory.
`-d <tag>` deletes the tag.
+`-l <pattern>` lists tags that match the given pattern (or all
+if no pattern is given).
+
OPTIONS
-------
-a::
-d::
Delete an existing tag with the given name
+-l <pattern>::
+ List tags that match the given pattern (or all if no pattern is given).
+
-m <msg>::
Use the given tag message (instead of prompting)
# Define NO_SOCKADDR_STORAGE if your platform does not have struct
# sockaddr_storage.
#
+# Define NO_ICONV if your libc does not properly support iconv.
+#
# Define COLLISION_CHECK below if you believe that SHA1's
# 1461501637330902918203684832716283019655932542976 hashes do not give you
# sufficient guarantee that no collisions between objects will ever happen.
endif
endif
+ifdef NO_ICONV
+ ALL_CFLAGS += -DNO_ICONV
+endif
+
ifdef PPC_SHA1
SHA1_HEADER = "ppc/sha1.h"
LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
unsigned long approxidate(const char *);
extern int setup_ident(void);
-extern const char *git_author_info(void);
-extern const char *git_committer_info(void);
+extern const char *git_author_info(int);
+extern const char *git_committer_info(int);
struct checkout {
const char *base_dir;
add_buffer(&buffer, &size, "parent %s\n", sha1_to_hex(parent_sha1[i]));
/* Person/date information */
- add_buffer(&buffer, &size, "author %s\n", git_author_info());
- add_buffer(&buffer, &size, "committer %s\n\n", git_committer_info());
+ add_buffer(&buffer, &size, "author %s\n", git_author_info(1));
+ add_buffer(&buffer, &size, "committer %s\n\n", git_committer_info(1));
/* And add the comment */
while (fgets(comment, sizeof(comment), stdin) != NULL)
/*
* Performs an in-place topological sort on the list supplied.
*/
-void sort_in_topological_order(struct commit_list ** list)
+void sort_in_topological_order(struct commit_list ** list, int lifo)
{
struct commit_list * next = *list;
struct commit_list * work = NULL, **insert;
}
next=next->next;
}
+
/* process the list in topological order */
+ if (!lifo)
+ sort_by_date(&work);
while (work) {
struct commit * work_item = pop_commit(&work);
struct sort_node * work_node = (struct sort_node *)work_item->object.util;
* guaranteeing topological order.
*/
pn->indegree--;
- if (!pn->indegree)
- commit_list_insert(parent, &work);
+ if (!pn->indegree) {
+ if (!lifo)
+ insert_by_date(parent, &work);
+ else
+ commit_list_insert(parent, &work);
+ }
}
parents=parents->next;
}
* Post-conditions:
* invariant of resulting list is:
* a reachable from b => ord(b) < ord(a)
+ * in addition, when lifo == 0, commits on parallel tracks are
+ * sorted in the dates order.
*/
-void sort_in_topological_order(struct commit_list ** list);
+void sort_in_topological_order(struct commit_list ** list, int lifo);
#endif /* COMMIT_H */
--- /dev/null
+Contributed Software
+
+Although these pieces are available as part of the official git
+source tree, they are in somewhat different status. The
+intention is to keep interesting tools around git here, maybe
+even experimental ones, to give users an easier access to them,
+and to give tools wider exposure, so that they can be improved
+faster.
+
+I am not expecting to touch these myself that much. As far as
+my day-to-day operation is concerned, these subdirectories are
+owned by their respective primary authors. I am willing to help
+if users of these components and the contrib/ subtree "owners"
+have technical/design issues to resolve, but the initiative to
+fix and/or enhance things _must_ be on the side of the subtree
+owners. IOW, I won't be actively looking for bugs and rooms for
+enhancements in them as the git maintainer -- I may only do so
+just as one of the users when I want to scratch my own itch. If
+you have patches to things in contrib/ area, the patch should be
+first sent to the primary author, and then the primary author
+should ack and forward it to me (git pull request is nicer).
+This is the same way as how I have been treating gitk, and to a
+lesser degree various foreign SCM interfaces, so you know the
+drill.
+
+I expect that things that start their life in the contrib/ area
+to graduate out of contrib/ once they mature, either by becoming
+projects on their own, or moving to the toplevel directory. On
+the other hand, I expect I'll be proposing removal of disused
+and inactive ones from time to time.
+
+If you have new things to add to this area, please first propose
+it on the git mailing list, and after a list discussion proves
+there are some general interests (it does not have to be a
+list-wide consensus for a tool targeted to a relatively narrow
+audience -- for example I do not work with projects whose
+upstream is svn, so I have no use for git-svn myself, but it is
+of general interest for people who need to interoperate with SVN
+repositories in a way git-svn works better than git-svnimport),
+submit a patch to create a subdirectory of contrib/ and put your
+stuff there.
+
+-jc
+
--- /dev/null
+;;; git.el --- A user interface for git
+
+;; Copyright (C) 2005, 2006 Alexandre Julliard <julliard@winehq.org>
+
+;; Version: 1.0
+
+;; This program is free software; you can redistribute it and/or
+;; modify it under the terms of the GNU General Public License as
+;; published by the Free Software Foundation; either version 2 of
+;; the License, or (at your option) any later version.
+;;
+;; This program is distributed in the hope that it will be
+;; useful, but WITHOUT ANY WARRANTY; without even the implied
+;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+;; PURPOSE. See the GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public
+;; License along with this program; if not, write to the Free
+;; Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+;; MA 02111-1307 USA
+
+;;; Commentary:
+
+;; This file contains an interface for the git version control
+;; system. It provides easy access to the most frequently used git
+;; commands. The user interface is as far as possible identical to
+;; that of the PCL-CVS mode.
+;;
+;; To install: put this file on the load-path and place the following
+;; in your .emacs file:
+;;
+;; (require 'git)
+;;
+;; To start: `M-x git-status'
+;;
+;; TODO
+;; - portability to XEmacs
+;; - better handling of subprocess errors
+;; - hook into file save (after-save-hook)
+;; - diff against other branch
+;; - renaming files from the status buffer
+;; - support for appending signed-off-by
+;; - creating tags
+;; - fetch/pull
+;; - switching branches
+;; - revlist browser
+;; - git-show-branch browser
+;; - customize support
+;; - menus
+;;
+
+(eval-when-compile (require 'cl))
+(require 'ewoc)
+
+
+;;;; Faces
+;;;; ------------------------------------------------------------
+
+(defface git-status-face
+ '((((class color) (background light)) (:foreground "purple")))
+ "Git mode face used to highlight added and modified files.")
+
+(defface git-unmerged-face
+ '((((class color) (background light)) (:foreground "red" :bold t)))
+ "Git mode face used to highlight unmerged files.")
+
+(defface git-unknown-face
+ '((((class color) (background light)) (:foreground "goldenrod" :bold t)))
+ "Git mode face used to highlight unknown files.")
+
+(defface git-uptodate-face
+ '((((class color) (background light)) (:foreground "grey60")))
+ "Git mode face used to highlight up-to-date files.")
+
+(defface git-ignored-face
+ '((((class color) (background light)) (:foreground "grey60")))
+ "Git mode face used to highlight ignored files.")
+
+(defface git-mark-face
+ '((((class color) (background light)) (:foreground "red" :bold t)))
+ "Git mode face used for the file marks.")
+
+(defface git-header-face
+ '((((class color) (background light)) (:foreground "blue")))
+ "Git mode face used for commit headers.")
+
+(defface git-separator-face
+ '((((class color) (background light)) (:foreground "brown")))
+ "Git mode face used for commit separator.")
+
+(defface git-permission-face
+ '((((class color) (background light)) (:foreground "green" :bold t)))
+ "Git mode face used for permission changes.")
+
+(defvar git-committer-name nil
+ "*User name to use for commits.
+If not set, fall back to `add-log-full-name' and then `user-full-name'.")
+
+(defvar git-committer-email nil
+ "*Email address to use for commits.
+If not set, fall back to `add-log-mailing-address' and then `user-mail-address'.")
+
+(defvar git-commits-coding-system 'utf-8
+ "Default coding system for git commits.")
+
+(defconst git-log-msg-separator "--- log message follows this line ---")
+
+(defconst git-per-dir-ignore-file ".gitignore"
+ "Name of the per-directory ignore file.")
+
+
+;;;; Utilities
+;;;; ------------------------------------------------------------
+
+(defun git-get-env-strings (env)
+ "Build a list of NAME=VALUE strings from a list of environment strings."
+ (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env))
+
+(defun git-call-process-env (buffer env &rest args)
+ "Wrapper for call-process that sets environment strings."
+ (if env
+ (apply #'call-process "env" nil buffer nil
+ (append (git-get-env-strings env) (list "git") args))
+ (apply #'call-process "git" nil buffer nil args)))
+
+(defun git-run-process-region (buffer start end program args)
+ "Run a git process with a buffer region as input."
+ (let ((output-buffer (current-buffer))
+ (dir default-directory))
+ (with-current-buffer buffer
+ (cd dir)
+ (apply #'call-process-region start end program
+ nil (list output-buffer nil) nil args))))
+
+(defun git-run-command-buffer (buffer-name &rest args)
+ "Run a git command, sending the output to a buffer named BUFFER-NAME."
+ (let ((dir default-directory)
+ (buffer (get-buffer-create buffer-name)))
+ (message "Running git %s..." (car args))
+ (with-current-buffer buffer
+ (let ((default-directory dir)
+ (buffer-read-only nil))
+ (erase-buffer)
+ (apply #'git-call-process-env buffer nil args)))
+ (message "Running git %s...done" (car args))
+ buffer))
+
+(defun git-run-command (buffer env &rest args)
+ (message "Running git %s..." (car args))
+ (apply #'git-call-process-env buffer env args)
+ (message "Running git %s...done" (car args)))
+
+(defun git-run-command-region (buffer start end env &rest args)
+ "Run a git command with specified buffer region as input."
+ (message "Running git %s..." (car args))
+ (unless (eq 0 (if env
+ (git-run-process-region
+ buffer start end "env"
+ (append (git-get-env-strings env) (list "git") args))
+ (git-run-process-region
+ buffer start end "git" args)))
+ (error "Failed to run \"git %s\":\n%s" (mapconcat (lambda (x) x) args " ") (buffer-string)))
+ (message "Running git %s...done" (car args)))
+
+(defun git-get-string-sha1 (string)
+ "Read a SHA1 from the specified string."
+ (let ((pos (string-match "[0-9a-f]\\{40\\}" string)))
+ (and pos (substring string pos (match-end 0)))))
+
+(defun git-get-committer-name ()
+ "Return the name to use as GIT_COMMITTER_NAME."
+ ; copied from log-edit
+ (or git-committer-name
+ (and (boundp 'add-log-full-name) add-log-full-name)
+ (and (fboundp 'user-full-name) (user-full-name))
+ (and (boundp 'user-full-name) user-full-name)))
+
+(defun git-get-committer-email ()
+ "Return the email address to use as GIT_COMMITTER_EMAIL."
+ ; copied from log-edit
+ (or git-committer-email
+ (and (boundp 'add-log-mailing-address) add-log-mailing-address)
+ (and (fboundp 'user-mail-address) (user-mail-address))
+ (and (boundp 'user-mail-address) user-mail-address)))
+
+(defun git-escape-file-name (name)
+ "Escape a file name if necessary."
+ (if (string-match "[\n\t\"\\]" name)
+ (concat "\""
+ (mapconcat (lambda (c)
+ (case c
+ (?\n "\\n")
+ (?\t "\\t")
+ (?\\ "\\\\")
+ (?\" "\\\"")
+ (t (char-to-string c))))
+ name "")
+ "\"")
+ name))
+
+(defun git-get-top-dir (dir)
+ "Retrieve the top-level directory of a git tree."
+ (let ((cdup (with-output-to-string
+ (with-current-buffer standard-output
+ (cd dir)
+ (unless (eq 0 (call-process "git" nil t nil "rev-parse" "--show-cdup"))
+ (error "cannot find top-level git tree for %s." dir))))))
+ (expand-file-name (concat (file-name-as-directory dir)
+ (car (split-string cdup "\n"))))))
+
+;stolen from pcl-cvs
+(defun git-append-to-ignore (file)
+ "Add a file name to the ignore file in its directory."
+ (let* ((fullname (expand-file-name file))
+ (dir (file-name-directory fullname))
+ (name (file-name-nondirectory fullname)))
+ (save-window-excursion
+ (set-buffer (find-file-noselect (expand-file-name git-per-dir-ignore-file dir)))
+ (goto-char (point-max))
+ (unless (zerop (current-column)) (insert "\n"))
+ (insert name "\n")
+ (sort-lines nil (point-min) (point-max))
+ (save-buffer))))
+
+
+;;;; Wrappers for basic git commands
+;;;; ------------------------------------------------------------
+
+(defun git-rev-parse (rev)
+ "Parse a revision name and return its SHA1."
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t nil "rev-parse" rev)))))
+
+(defun git-symbolic-ref (ref)
+ "Wrapper for the git-symbolic-ref command."
+ (car
+ (split-string
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t nil "symbolic-ref" ref)))
+ "\n")))
+
+(defun git-update-ref (ref val &optional oldval)
+ "Update a reference by calling git-update-ref."
+ (apply #'git-call-process-env nil nil "update-ref" ref val (if oldval (list oldval))))
+
+(defun git-read-tree (tree &optional index-file)
+ "Read a tree into the index file."
+ (apply #'git-call-process-env nil
+ (if index-file `(("GIT_INDEX_FILE" . ,index-file)) nil)
+ "read-tree" (if tree (list tree))))
+
+(defun git-write-tree (&optional index-file)
+ "Call git-write-tree and return the resulting tree SHA1 as a string."
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (git-call-process-env t
+ (if index-file `(("GIT_INDEX_FILE" . ,index-file)) nil)
+ "write-tree")))))
+
+(defun git-commit-tree (buffer tree head)
+ "Call git-commit-tree with buffer as input and return the resulting commit SHA1."
+ (let ((author-name (git-get-committer-name))
+ (author-email (git-get-committer-email))
+ author-date log-start log-end args)
+ (when head
+ (push "-p" args)
+ (push head args))
+ (with-current-buffer buffer
+ (goto-char (point-min))
+ (if
+ (setq log-start (re-search-forward (concat "^" git-log-msg-separator "\n") nil t))
+ (save-restriction
+ (narrow-to-region (point-min) log-start)
+ (goto-char (point-min))
+ (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t)
+ (setq author-name (match-string 1)
+ author-email (match-string 2)))
+ (goto-char (point-min))
+ (when (re-search-forward "^Date: +\\(.*\\)$" nil t)
+ (setq author-date (match-string 1)))
+ (goto-char (point-min))
+ (while (re-search-forward "^Parent: +\\([0-9a-f]+\\)" nil t)
+ (unless (string-equal head (match-string 1))
+ (push "-p" args)
+ (push (match-string 1) args))))
+ (setq log-start (point-min)))
+ (setq log-end (point-max)))
+ (git-get-string-sha1
+ (with-output-to-string
+ (with-current-buffer standard-output
+ (let ((coding-system-for-write git-commits-coding-system)
+ (env `(("GIT_AUTHOR_NAME" . ,author-name)
+ ("GIT_AUTHOR_EMAIL" . ,author-email)
+ ("GIT_COMMITTER_NAME" . ,(git-get-committer-name))
+ ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email)))))
+ (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env))
+ (apply #'git-run-command-region
+ buffer log-start log-end env
+ "commit-tree" tree (nreverse args))))))))
+
+(defun git-empty-db-p ()
+ "Check if the git db is empty (no commit done yet)."
+ (not (eq 0 (call-process "git" nil nil nil "rev-parse" "--verify" "HEAD"))))
+
+(defun git-get-merge-heads ()
+ "Retrieve the merge heads from the MERGE_HEAD file if present."
+ (let (heads)
+ (when (file-readable-p ".git/MERGE_HEAD")
+ (with-temp-buffer
+ (insert-file-contents ".git/MERGE_HEAD" nil nil nil t)
+ (goto-char (point-min))
+ (while (re-search-forward "[0-9a-f]\\{40\\}" nil t)
+ (push (match-string 0) heads))))
+ (nreverse heads)))
+
+;;;; File info structure
+;;;; ------------------------------------------------------------
+
+; fileinfo structure stolen from pcl-cvs
+(defstruct (git-fileinfo
+ (:copier nil)
+ (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked))
+ (:conc-name git-fileinfo->))
+ marked ;; t/nil
+ state ;; current state
+ name ;; file name
+ old-perm new-perm ;; permission flags
+ rename-state ;; rename or copy state
+ orig-name ;; original name for renames or copies
+ needs-refresh) ;; whether file needs to be refreshed
+
+(defvar git-status nil)
+
+(defun git-clear-status (status)
+ "Remove everything from the status list."
+ (ewoc-filter status (lambda (info) nil)))
+
+(defun git-set-files-state (files state)
+ "Set the state of a list of files."
+ (dolist (info files)
+ (unless (eq (git-fileinfo->state info) state)
+ (setf (git-fileinfo->state info) state)
+ (setf (git-fileinfo->rename-state info) nil)
+ (setf (git-fileinfo->orig-name info) nil)
+ (setf (git-fileinfo->needs-refresh info) t))))
+
+(defun git-state-code (code)
+ "Convert from a string to a added/deleted/modified state."
+ (case (string-to-char code)
+ (?M 'modified)
+ (?? 'unknown)
+ (?A 'added)
+ (?D 'deleted)
+ (?U 'unmerged)
+ (t nil)))
+
+(defun git-status-code-as-string (code)
+ "Format a git status code as string."
+ (case code
+ ('modified (propertize "Modified" 'face 'git-status-face))
+ ('unknown (propertize "Unknown " 'face 'git-unknown-face))
+ ('added (propertize "Added " 'face 'git-status-face))
+ ('deleted (propertize "Deleted " 'face 'git-status-face))
+ ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face))
+ ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face))
+ ('ignored (propertize "Ignored " 'face 'git-ignored-face))
+ (t "? ")))
+
+(defun git-rename-as-string (info)
+ "Return a string describing the copy or rename associated with INFO, or an empty string if none."
+ (let ((state (git-fileinfo->rename-state info)))
+ (if state
+ (propertize
+ (concat " ("
+ (if (eq state 'copy) "copied from "
+ (if (eq (git-fileinfo->state info) 'added) "renamed to "
+ "renamed from "))
+ (git-escape-file-name (git-fileinfo->orig-name info))
+ ")") 'face 'git-status-face)
+ "")))
+
+(defun git-permissions-as-string (old-perm new-perm)
+ "Format a permission change as string."
+ (propertize
+ (if (or (not old-perm)
+ (not new-perm)
+ (eq 0 (logand #O111 (logxor old-perm new-perm))))
+ " "
+ (if (eq 0 (logand #O111 old-perm)) "+x" "-x"))
+ 'face 'git-permission-face))
+
+(defun git-fileinfo-prettyprint (info)
+ "Pretty-printer for the git-fileinfo structure."
+ (insert (format " %s %s %s %s%s"
+ (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ")
+ (git-status-code-as-string (git-fileinfo->state info))
+ (git-permissions-as-string (git-fileinfo->old-perm info) (git-fileinfo->new-perm info))
+ (git-escape-file-name (git-fileinfo->name info))
+ (git-rename-as-string info))))
+
+(defun git-parse-status (status)
+ "Parse the output of git-diff-index in the current buffer."
+ (goto-char (point-min))
+ (while (re-search-forward
+ ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMU]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0"
+ nil t 1)
+ (let ((old-perm (string-to-number (match-string 1) 8))
+ (new-perm (string-to-number (match-string 2) 8))
+ (state (or (match-string 4) (match-string 6)))
+ (name (or (match-string 5) (match-string 7)))
+ (new-name (match-string 8)))
+ (if new-name ; copy or rename
+ (if (eq ?C (string-to-char state))
+ (ewoc-enter-last status (git-create-fileinfo 'added new-name old-perm new-perm 'copy name))
+ (ewoc-enter-last status (git-create-fileinfo 'deleted name 0 0 'rename new-name))
+ (ewoc-enter-last status (git-create-fileinfo 'added new-name old-perm new-perm 'rename name)))
+ (ewoc-enter-last status (git-create-fileinfo (git-state-code state) name old-perm new-perm))))))
+
+(defun git-find-status-file (status file)
+ "Find a given file in the status ewoc and return its node."
+ (let ((node (ewoc-nth status 0)))
+ (while (and node (not (string= file (git-fileinfo->name (ewoc-data node)))))
+ (setq node (ewoc-next status node)))
+ node))
+
+(defun git-parse-ls-files (status default-state &optional skip-existing)
+ "Parse the output of git-ls-files in the current buffer."
+ (goto-char (point-min))
+ (let (infolist)
+ (while (re-search-forward "\\([HMRCK?]\\) \\([^\0]*\\)\0" nil t 1)
+ (let ((state (match-string 1))
+ (name (match-string 2)))
+ (unless (and skip-existing (git-find-status-file status name))
+ (push (git-create-fileinfo (or (git-state-code state) default-state) name) infolist))))
+ (dolist (info (nreverse infolist))
+ (ewoc-enter-last status info))))
+
+(defun git-parse-ls-unmerged (status)
+ "Parse the output of git-ls-files -u in the current buffer."
+ (goto-char (point-min))
+ (let (files)
+ (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t)
+ (let ((node (git-find-status-file status (match-string 1))))
+ (when node (push (ewoc-data node) files))))
+ (git-set-files-state files 'unmerged)))
+
+(defun git-add-status-file (state name)
+ "Add a new file to the status list (if not existing already) and return its node."
+ (unless git-status (error "Not in git-status buffer."))
+ (or (git-find-status-file git-status name)
+ (ewoc-enter-last git-status (git-create-fileinfo state name))))
+
+(defun git-marked-files ()
+ "Return a list of all marked files, or if none a list containing just the file at cursor position."
+ (unless git-status (error "Not in git-status buffer."))
+ (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info)))
+ (list (ewoc-data (ewoc-locate git-status)))))
+
+(defun git-marked-files-state (&rest states)
+ "Return marked files that are in the specified states."
+ (let ((files (git-marked-files))
+ result)
+ (dolist (info files)
+ (when (memq (git-fileinfo->state info) states)
+ (push info result)))
+ result))
+
+(defun git-refresh-files ()
+ "Refresh all files that need it and clear the needs-refresh flag."
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map
+ (lambda (info)
+ (let ((refresh (git-fileinfo->needs-refresh info)))
+ (setf (git-fileinfo->needs-refresh info) nil)
+ refresh))
+ git-status)
+ ; move back to goal column
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-refresh-ewoc-hf (status)
+ "Refresh the ewoc header and footer."
+ (let ((branch (git-symbolic-ref "HEAD"))
+ (head (if (git-empty-db-p) "Nothing committed yet"
+ (substring (git-rev-parse "HEAD") 0 10)))
+ (merge-heads (git-get-merge-heads)))
+ (ewoc-set-hf status
+ (format "Directory: %s\nBranch: %s\nHead: %s%s\n"
+ default-directory
+ (if (string-match "^refs/heads/" branch)
+ (substring branch (match-end 0))
+ branch)
+ head
+ (if merge-heads
+ (concat "\nMerging: "
+ (mapconcat (lambda (str) (substring str 0 10)) merge-heads " "))
+ ""))
+ (if (ewoc-nth status 0) "" " No changes."))))
+
+(defun git-get-filenames (files)
+ (mapcar (lambda (info) (git-fileinfo->name info)) files))
+
+(defun git-update-index (index-file files)
+ "Run git-update-index on a list of files."
+ (let ((env (and index-file `(("GIT_INDEX_FILE" . ,index-file))))
+ added deleted modified)
+ (dolist (info files)
+ (case (git-fileinfo->state info)
+ ('added (push info added))
+ ('deleted (push info deleted))
+ ('modified (push info modified))))
+ (when added
+ (apply #'git-run-command nil env "update-index" "--add" "--" (git-get-filenames added)))
+ (when deleted
+ (apply #'git-run-command nil env "update-index" "--remove" "--" (git-get-filenames deleted)))
+ (when modified
+ (apply #'git-run-command nil env "update-index" "--" (git-get-filenames modified)))))
+
+(defun git-do-commit ()
+ "Perform the actual commit using the current buffer as log message."
+ (interactive)
+ (let ((buffer (current-buffer))
+ (index-file (make-temp-file "gitidx")))
+ (with-current-buffer log-edit-parent-buffer
+ (if (git-marked-files-state 'unmerged)
+ (message "You cannot commit unmerged files, resolve them first.")
+ (unwind-protect
+ (let ((files (git-marked-files-state 'added 'deleted 'modified))
+ head head-tree)
+ (unless (git-empty-db-p)
+ (setq head (git-rev-parse "HEAD")
+ head-tree (git-rev-parse "HEAD^{tree}")))
+ (if files
+ (progn
+ (git-read-tree head-tree index-file)
+ (git-update-index nil files) ;update both the default index
+ (git-update-index index-file files) ;and the temporary one
+ (let ((tree (git-write-tree index-file)))
+ (if (or (not (string-equal tree head-tree))
+ (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? "))
+ (let ((commit (git-commit-tree buffer tree head)))
+ (git-update-ref "HEAD" commit head)
+ (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil))
+ (with-current-buffer buffer (erase-buffer))
+ (git-set-files-state files 'uptodate)
+ (git-refresh-files)
+ (git-refresh-ewoc-hf git-status)
+ (message "Committed %s." commit))
+ (message "Commit aborted."))))
+ (message "No files to commit.")))
+ (delete-file index-file))))))
+
+
+;;;; Interactive functions
+;;;; ------------------------------------------------------------
+
+(defun git-mark-file ()
+ "Mark the file that the cursor is on and move to the next one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) t)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-next git-status 1)))
+
+(defun git-unmark-file ()
+ "Unmark the file that the cursor is on and move to the next one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) nil)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-next git-status 1)))
+
+(defun git-unmark-file-up ()
+ "Unmark the file that the cursor is on and move to the previous one."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let* ((pos (ewoc-locate git-status))
+ (info (ewoc-data pos)))
+ (setf (git-fileinfo->marked info) nil)
+ (ewoc-invalidate git-status pos)
+ (ewoc-goto-prev git-status 1)))
+
+(defun git-mark-all ()
+ "Mark all files."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) t) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-unmark-all ()
+ "Unmark all files."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) nil) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-toggle-all-marks ()
+ "Toggle all file marks."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status)
+ ; move back to goal column after invalidate
+ (when goal-column (move-to-column goal-column)))
+
+(defun git-next-file (&optional n)
+ "Move the selection down N files."
+ (interactive "p")
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-goto-next git-status n))
+
+(defun git-prev-file (&optional n)
+ "Move the selection up N files."
+ (interactive "p")
+ (unless git-status (error "Not in git-status buffer."))
+ (ewoc-goto-prev git-status n))
+
+(defun git-add-file ()
+ "Add marked file(s) to the index cache."
+ (interactive)
+ (let ((files (git-marked-files-state 'unknown)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'added (file-relative-name
+ (read-file-name "File to add: " nil nil t))))
+ files))
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--add" "--" (git-get-filenames files))
+ (git-set-files-state files 'added)
+ (git-refresh-files)))
+
+(defun git-ignore-file ()
+ "Add marked file(s) to the ignore list."
+ (interactive)
+ (let ((files (git-marked-files-state 'unknown)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'unknown (file-relative-name
+ (read-file-name "File to ignore: " nil nil t))))
+ files))
+ (dolist (info files) (git-append-to-ignore (git-fileinfo->name info)))
+ (git-set-files-state files 'ignored)
+ (git-refresh-files)))
+
+(defun git-remove-file ()
+ "Remove the marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files-state 'added 'modified 'unknown 'uptodate)))
+ (unless files
+ (push (ewoc-data
+ (git-add-status-file 'unknown (file-relative-name
+ (read-file-name "File to remove: " nil nil t))))
+ files))
+ (if (yes-or-no-p
+ (format "Remove %d file%s? " (length files) (if (> (length files) 1) "s" "")))
+ (progn
+ (dolist (info files)
+ (let ((name (git-fileinfo->name info)))
+ (when (file-exists-p name) (delete-file name))))
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--remove" "--" (git-get-filenames files))
+ ; remove unknown files from the list, set the others to deleted
+ (ewoc-filter git-status
+ (lambda (info files)
+ (not (and (memq info files) (eq (git-fileinfo->state info) 'unknown))))
+ files)
+ (git-set-files-state files 'deleted)
+ (git-refresh-files)
+ (unless (ewoc-nth git-status 0) ; refresh header if list is empty
+ (git-refresh-ewoc-hf git-status)))
+ (message "Aborting"))))
+
+(defun git-revert-file ()
+ "Revert changes to the marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files))
+ added modified)
+ (when (and files
+ (yes-or-no-p
+ (format "Revert %d file%s? " (length files) (if (> (length files) 1) "s" ""))))
+ (dolist (info files)
+ (case (git-fileinfo->state info)
+ ('added (push info added))
+ ('deleted (push info modified))
+ ('unmerged (push info modified))
+ ('modified (push info modified))))
+ (when added
+ (apply #'git-run-command nil nil "update-index" "--force-remove" "--" (git-get-filenames added))
+ (git-set-files-state added 'unknown))
+ (when modified
+ (apply #'git-run-command nil nil "checkout" "HEAD" (git-get-filenames modified))
+ (git-set-files-state modified 'uptodate))
+ (git-refresh-files))))
+
+(defun git-resolve-file ()
+ "Resolve conflicts in marked file(s)."
+ (interactive)
+ (let ((files (git-marked-files-state 'unmerged)))
+ (when files
+ (apply #'git-run-command nil nil "update-index" "--info-only" "--" (git-get-filenames files))
+ (git-set-files-state files 'modified)
+ (git-refresh-files))))
+
+(defun git-remove-handled ()
+ "Remove handled files from the status list."
+ (interactive)
+ (ewoc-filter git-status
+ (lambda (info)
+ (not (or (eq (git-fileinfo->state info) 'ignored)
+ (eq (git-fileinfo->state info) 'uptodate)))))
+ (unless (ewoc-nth git-status 0) ; refresh header if list is empty
+ (git-refresh-ewoc-hf git-status)))
+
+(defun git-setup-diff-buffer (buffer)
+ "Setup a buffer for displaying a diff."
+ (with-current-buffer buffer
+ (diff-mode)
+ (goto-char (point-min))
+ (setq buffer-read-only t))
+ (display-buffer buffer)
+ (shrink-window-if-larger-than-buffer))
+
+(defun git-diff-file ()
+ "Diff the marked file(s) against HEAD."
+ (interactive)
+ (let ((files (git-marked-files)))
+ (git-setup-diff-buffer
+ (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files)))))
+
+(defun git-diff-unmerged-file (stage)
+ "Diff the marked unmerged file(s) against the specified stage."
+ (let ((files (git-marked-files)))
+ (git-setup-diff-buffer
+ (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files)))))
+
+(defun git-diff-file-base ()
+ "Diff the marked unmerged file(s) against the common base file."
+ (interactive)
+ (git-diff-unmerged-file "-1"))
+
+(defun git-diff-file-mine ()
+ "Diff the marked unmerged file(s) against my pre-merge version."
+ (interactive)
+ (git-diff-unmerged-file "-2"))
+
+(defun git-diff-file-other ()
+ "Diff the marked unmerged file(s) against the other's pre-merge version."
+ (interactive)
+ (git-diff-unmerged-file "-3"))
+
+(defun git-diff-file-combined ()
+ "Do a combined diff of the marked unmerged file(s)."
+ (interactive)
+ (git-diff-unmerged-file "-c"))
+
+(defun git-diff-file-idiff ()
+ "Perform an interactive diff on the current file."
+ (interactive)
+ (error "Interactive diffs not implemented yet."))
+
+(defun git-log-file ()
+ "Display a log of changes to the marked file(s)."
+ (interactive)
+ (let* ((files (git-marked-files))
+ (coding-system-for-read git-commits-coding-system)
+ (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files))))
+ (with-current-buffer buffer
+ ; (git-log-mode) FIXME: implement log mode
+ (goto-char (point-min))
+ (setq buffer-read-only t))
+ (display-buffer buffer)))
+
+(defun git-log-edit-files ()
+ "Return a list of marked files for use in the log-edit buffer."
+ (with-current-buffer log-edit-parent-buffer
+ (git-get-filenames (git-marked-files-state 'added 'deleted 'modified))))
+
+(defun git-commit-file ()
+ "Commit the marked file(s), asking for a commit message."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((buffer (get-buffer-create "*git-commit*"))
+ (merge-heads (git-get-merge-heads))
+ (dir default-directory))
+ (with-current-buffer buffer
+ (when (eq 0 (buffer-size))
+ (cd dir)
+ (erase-buffer)
+ (insert
+ (propertize
+ (format "Author: %s <%s>\n%s"
+ (git-get-committer-name) (git-get-committer-email)
+ (if merge-heads
+ (format "Parent: %s\n%s\n"
+ (git-rev-parse "HEAD")
+ (mapconcat (lambda (str) (concat "Parent: " str)) merge-heads "\n"))
+ ""))
+ 'face 'git-header-face)
+ (propertize git-log-msg-separator 'face 'git-separator-face)
+ "\n")
+ (when (and merge-heads (file-readable-p ".git/MERGE_MSG"))
+ (insert-file-contents ".git/MERGE_MSG"))))
+ (log-edit #'git-do-commit nil #'git-log-edit-files buffer)))
+
+(defun git-find-file ()
+ "Visit the current file in its own buffer."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (find-file (git-fileinfo->name info))
+ (when (eq 'unmerged (git-fileinfo->state info))
+ (smerge-mode))))
+
+(defun git-find-file-imerge ()
+ "Visit the current file in interactive merge mode."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (find-file (git-fileinfo->name info))
+ (smerge-ediff)))
+
+(defun git-view-file ()
+ "View the current file in its own buffer."
+ (interactive)
+ (unless git-status (error "Not in git-status buffer."))
+ (let ((info (ewoc-data (ewoc-locate git-status))))
+ (view-file (git-fileinfo->name info))))
+
+(defun git-refresh-status ()
+ "Refresh the git status buffer."
+ (interactive)
+ (let* ((status git-status)
+ (pos (ewoc-locate status))
+ (cur-name (and pos (git-fileinfo->name (ewoc-data pos)))))
+ (unless status (error "Not in git-status buffer."))
+ (git-clear-status status)
+ (git-run-command nil nil "update-index" "--info-only" "--refresh")
+ (if (git-empty-db-p)
+ ; we need some special handling for an empty db
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-t" "-c")
+ (git-parse-ls-files status 'added))
+ (with-temp-buffer
+ (git-run-command t nil "diff-index" "-z" "-M" "HEAD")
+ (git-parse-status status)))
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-u")
+ (git-parse-ls-unmerged status))
+ (when (file-readable-p ".git/info/exclude")
+ (with-temp-buffer
+ (git-run-command t nil "ls-files" "-z" "-t" "-o"
+ "--exclude-from=.git/info/exclude"
+ (concat "--exclude-per-directory=" git-per-dir-ignore-file))
+ (git-parse-ls-files status 'unknown)))
+ (git-refresh-files)
+ (git-refresh-ewoc-hf status)
+ ; move point to the current file name if any
+ (let ((node (and cur-name (git-find-status-file status cur-name))))
+ (when node (ewoc-goto-node status node)))))
+
+(defun git-status-quit ()
+ "Quit git-status mode."
+ (interactive)
+ (bury-buffer))
+
+;;;; Major Mode
+;;;; ------------------------------------------------------------
+
+(defvar git-status-mode-hook nil
+ "Run after `git-status-mode' is setup.")
+
+(defvar git-status-mode-map nil
+ "Keymap for git major mode.")
+
+(defvar git-status nil
+ "List of all files managed by the git-status mode.")
+
+(unless git-status-mode-map
+ (let ((map (make-keymap))
+ (diff-map (make-sparse-keymap)))
+ (suppress-keymap map)
+ (define-key map " " 'git-next-file)
+ (define-key map "a" 'git-add-file)
+ (define-key map "c" 'git-commit-file)
+ (define-key map "d" diff-map)
+ (define-key map "=" 'git-diff-file)
+ (define-key map "f" 'git-find-file)
+ (define-key map [RET] 'git-find-file)
+ (define-key map "g" 'git-refresh-status)
+ (define-key map "i" 'git-ignore-file)
+ (define-key map "l" 'git-log-file)
+ (define-key map "m" 'git-mark-file)
+ (define-key map "M" 'git-mark-all)
+ (define-key map "n" 'git-next-file)
+ (define-key map "p" 'git-prev-file)
+ (define-key map "q" 'git-status-quit)
+ (define-key map "r" 'git-remove-file)
+ (define-key map "R" 'git-resolve-file)
+ (define-key map "T" 'git-toggle-all-marks)
+ (define-key map "u" 'git-unmark-file)
+ (define-key map "U" 'git-revert-file)
+ (define-key map "v" 'git-view-file)
+ (define-key map "x" 'git-remove-handled)
+ (define-key map "\C-?" 'git-unmark-file-up)
+ (define-key map "\M-\C-?" 'git-unmark-all)
+ ; the diff submap
+ (define-key diff-map "b" 'git-diff-file-base)
+ (define-key diff-map "c" 'git-diff-file-combined)
+ (define-key diff-map "=" 'git-diff-file)
+ (define-key diff-map "e" 'git-diff-file-idiff)
+ (define-key diff-map "E" 'git-find-file-imerge)
+ (define-key diff-map "m" 'git-diff-file-mine)
+ (define-key diff-map "o" 'git-diff-file-other)
+ (setq git-status-mode-map map)))
+
+;; git mode should only run in the *git status* buffer
+(put 'git-status-mode 'mode-class 'special)
+
+(defun git-status-mode ()
+ "Major mode for interacting with Git.
+Commands:
+\\{git-status-mode-map}"
+ (kill-all-local-variables)
+ (buffer-disable-undo)
+ (setq mode-name "git status"
+ major-mode 'git-status-mode
+ goal-column 17
+ buffer-read-only t)
+ (use-local-map git-status-mode-map)
+ (let ((buffer-read-only nil))
+ (erase-buffer)
+ (let ((status (ewoc-create 'git-fileinfo-prettyprint "" "")))
+ (set (make-local-variable 'git-status) status))
+ (run-hooks 'git-status-mode-hook)))
+
+(defun git-status (dir)
+ "Entry point into git-status mode."
+ (interactive "DSelect directory: ")
+ (setq dir (git-get-top-dir dir))
+ (if (file-directory-p (concat (file-name-as-directory dir) ".git"))
+ (let ((buffer (create-file-buffer (expand-file-name "*git-status*" dir))))
+ (switch-to-buffer buffer)
+ (git-status-mode)
+ (cd dir)
+ (git-refresh-status)
+ (goto-char (point-min)))
+ (message "%s is not a git working tree." dir)))
+
+(provide 'git)
+;;; git.el ends here
--- /dev/null
+git-svn
+git-svn.xml
+git-svn.html
+git-svn.1
--- /dev/null
+all: git-svn
+
+prefix?=$(HOME)
+bindir=$(prefix)/bin
+mandir=$(prefix)/man
+man1=$(mandir)/man1
+INSTALL?=install
+doc_conf=../../Documentation/asciidoc.conf
+-include ../../config.mak
+
+git-svn: git-svn.perl
+ cp $< $@
+ chmod +x $@
+
+install: all
+ $(INSTALL) -d -m755 $(DESTDIR)$(bindir)
+ $(INSTALL) git-svn $(DESTDIR)$(bindir)
+
+install-doc: doc
+ $(INSTALL) git-svn.1 $(DESTDIR)$(man1)
+
+doc: git-svn.1
+git-svn.1 : git-svn.xml
+ xmlto man git-svn.xml
+git-svn.xml : git-svn.txt
+ asciidoc -b docbook -d manpage \
+ -f ../../Documentation/asciidoc.conf $<
+test:
+ cd t && $(SHELL) ./t0000-contrib-git-svn.sh
+
+clean:
+ rm -f git-svn *.xml *.html *.1
--- /dev/null
+#!/usr/bin/env perl
+# Copyright (C) 2006, Eric Wong <normalperson@yhbt.net>
+# License: GPL v2 or later
+use warnings;
+use strict;
+use vars qw/ $AUTHOR $VERSION
+ $SVN_URL $SVN_INFO $SVN_WC
+ $GIT_SVN_INDEX $GIT_SVN
+ $GIT_DIR $REV_DIR/;
+$AUTHOR = 'Eric Wong <normalperson@yhbt.net>';
+$VERSION = '0.9.1';
+$GIT_DIR = $ENV{GIT_DIR} || "$ENV{PWD}/.git";
+$GIT_SVN = $ENV{GIT_SVN_ID} || 'git-svn';
+$GIT_SVN_INDEX = "$GIT_DIR/$GIT_SVN/index";
+$ENV{GIT_DIR} ||= $GIT_DIR;
+$SVN_URL = undef;
+$REV_DIR = "$GIT_DIR/$GIT_SVN/revs";
+$SVN_WC = "$GIT_DIR/$GIT_SVN/tree";
+
+# make sure the svn binary gives consistent output between locales and TZs:
+$ENV{TZ} = 'UTC';
+$ENV{LC_ALL} = 'C';
+
+# If SVN:: library support is added, please make the dependencies
+# optional and preserve the capability to use the command-line client.
+# use eval { require SVN::... } to make it lazy load
+use Carp qw/croak/;
+use IO::File qw//;
+use File::Basename qw/dirname basename/;
+use File::Path qw/mkpath/;
+use Getopt::Long qw/:config gnu_getopt no_ignore_case auto_abbrev/;
+use File::Spec qw//;
+my $sha1 = qr/[a-f\d]{40}/;
+my $sha1_short = qr/[a-f\d]{6,40}/;
+my ($_revision,$_stdin,$_no_ignore_ext,$_no_stop_copy,$_help,$_rmdir,$_edit,
+ $_find_copies_harder, $_l, $_version);
+
+GetOptions( 'revision|r=s' => \$_revision,
+ 'no-ignore-externals' => \$_no_ignore_ext,
+ 'stdin|' => \$_stdin,
+ 'edit|e' => \$_edit,
+ 'rmdir' => \$_rmdir,
+ 'help|H|h' => \$_help,
+ 'find-copies-harder' => \$_find_copies_harder,
+ 'l=i' => \$_l,
+ 'version|V' => \$_version,
+ 'no-stop-on-copy' => \$_no_stop_copy );
+my %cmd = (
+ fetch => [ \&fetch, "Download new revisions from SVN" ],
+ init => [ \&init, "Initialize and fetch (import)"],
+ commit => [ \&commit, "Commit git revisions to SVN" ],
+ rebuild => [ \&rebuild, "Rebuild git-svn metadata (after git clone)" ],
+ help => [ \&usage, "Show help" ],
+);
+my $cmd;
+for (my $i = 0; $i < @ARGV; $i++) {
+ if (defined $cmd{$ARGV[$i]}) {
+ $cmd = $ARGV[$i];
+ splice @ARGV, $i, 1;
+ last;
+ }
+};
+
+# we may be called as git-svn-(command), or git-svn(command).
+foreach (keys %cmd) {
+ if (/git\-svn\-?($_)(?:\.\w+)?$/) {
+ $cmd = $1;
+ last;
+ }
+}
+usage(0) if $_help;
+version() if $_version;
+usage(1) unless (defined $cmd);
+svn_check_ignore_externals();
+$cmd{$cmd}->[0]->(@ARGV);
+exit 0;
+
+####################### primary functions ######################
+sub usage {
+ my $exit = shift || 0;
+ my $fd = $exit ? \*STDERR : \*STDOUT;
+ print $fd <<"";
+git-svn - bidirectional operations between a single Subversion tree and git
+Usage: $0 <command> [options] [arguments]\n
+Available commands:
+
+ foreach (sort keys %cmd) {
+ print $fd ' ',pack('A10',$_),$cmd{$_}->[1],"\n";
+ }
+ print $fd <<"";
+\nGIT_SVN_ID may be set in the environment to an arbitrary identifier if
+you're tracking multiple SVN branches/repositories in one git repository
+and want to keep them separate.
+
+ exit $exit;
+}
+
+sub version {
+ print "git-svn version $VERSION\n";
+ exit 0;
+}
+
+sub rebuild {
+ $SVN_URL = shift or undef;
+ my $repo_uuid;
+ my $newest_rev = 0;
+
+ my $pid = open(my $rev_list,'-|');
+ defined $pid or croak $!;
+ if ($pid == 0) {
+ exec("git-rev-list","$GIT_SVN-HEAD") or croak $!;
+ }
+ my $first;
+ while (<$rev_list>) {
+ chomp;
+ my $c = $_;
+ croak "Non-SHA1: $c\n" unless $c =~ /^$sha1$/o;
+ my @commit = grep(/^git-svn-id: /,`git-cat-file commit $c`);
+ next if (!@commit); # skip merges
+ my $id = $commit[$#commit];
+ my ($url, $rev, $uuid) = ($id =~ /^git-svn-id:\s(\S+?)\@(\d+)
+ \s([a-f\d\-]+)$/x);
+ if (!$rev || !$uuid || !$url) {
+ # some of the original repositories I made had
+ # indentifiers like this:
+ ($rev, $uuid) = ($id =~/^git-svn-id:\s(\d+)
+ \@([a-f\d\-]+)/x);
+ if (!$rev || !$uuid) {
+ croak "Unable to extract revision or UUID from ",
+ "$c, $id\n";
+ }
+ }
+ print "r$rev = $c\n";
+ unless (defined $first) {
+ if (!$SVN_URL && !$url) {
+ croak "SVN repository location required: $url\n";
+ }
+ $SVN_URL ||= $url;
+ $repo_uuid = setup_git_svn();
+ $first = $rev;
+ }
+ if ($uuid ne $repo_uuid) {
+ croak "Repository UUIDs do not match!\ngot: $uuid\n",
+ "expected: $repo_uuid\n";
+ }
+ assert_revision_eq_or_unknown($rev, $c);
+ sys('git-update-ref',"$GIT_SVN/revs/$rev",$c);
+ $newest_rev = $rev if ($rev > $newest_rev);
+ }
+ close $rev_list or croak $?;
+ if (!chdir $SVN_WC) {
+ my @svn_co = ('svn','co',"-r$first");
+ push @svn_co, '--ignore-externals' unless $_no_ignore_ext;
+ sys(@svn_co, $SVN_URL, $SVN_WC);
+ chdir $SVN_WC or croak $!;
+ }
+
+ $pid = fork;
+ defined $pid or croak $!;
+ if ($pid == 0) {
+ my @svn_up = qw(svn up);
+ push @svn_up, '--ignore-externals' unless $_no_ignore_ext;
+ sys(@svn_up,"-r$newest_rev");
+ $ENV{GIT_INDEX_FILE} = $GIT_SVN_INDEX;
+ git_addremove();
+ exec('git-write-tree');
+ }
+ waitpid $pid, 0;
+}
+
+sub init {
+ $SVN_URL = shift or croak "SVN repository location required\n";
+ unless (-d $GIT_DIR) {
+ sys('git-init-db');
+ }
+ setup_git_svn();
+}
+
+sub fetch {
+ my (@parents) = @_;
+ $SVN_URL ||= file_to_s("$GIT_DIR/$GIT_SVN/info/url");
+ my @log_args = -d $SVN_WC ? ($SVN_WC) : ($SVN_URL);
+ unless ($_revision) {
+ $_revision = -d $SVN_WC ? 'BASE:HEAD' : '0:HEAD';
+ }
+ push @log_args, "-r$_revision";
+ push @log_args, '--stop-on-copy' unless $_no_stop_copy;
+
+ my $svn_log = svn_log_raw(@log_args);
+ @$svn_log = sort { $a->{revision} <=> $b->{revision} } @$svn_log;
+
+ my $base = shift @$svn_log or croak "No base revision!\n";
+ my $last_commit = undef;
+ unless (-d $SVN_WC) {
+ my @svn_co = ('svn','co',"-r$base->{revision}");
+ push @svn_co,'--ignore-externals' unless $_no_ignore_ext;
+ sys(@svn_co, $SVN_URL, $SVN_WC);
+ chdir $SVN_WC or croak $!;
+ $last_commit = git_commit($base, @parents);
+ unless (-f "$GIT_DIR/refs/heads/master") {
+ sys(qw(git-update-ref refs/heads/master),$last_commit);
+ }
+ assert_svn_wc_clean($base->{revision}, $last_commit);
+ } else {
+ chdir $SVN_WC or croak $!;
+ $last_commit = file_to_s("$REV_DIR/$base->{revision}");
+ }
+ my @svn_up = qw(svn up);
+ push @svn_up, '--ignore-externals' unless $_no_ignore_ext;
+ my $last_rev = $base->{revision};
+ foreach my $log_msg (@$svn_log) {
+ assert_svn_wc_clean($last_rev, $last_commit);
+ $last_rev = $log_msg->{revision};
+ sys(@svn_up,"-r$last_rev");
+ $last_commit = git_commit($log_msg, $last_commit, @parents);
+ }
+ assert_svn_wc_clean($last_rev, $last_commit);
+ return pop @$svn_log;
+}
+
+sub commit {
+ my (@commits) = @_;
+ if ($_stdin || !@commits) {
+ print "Reading from stdin...\n";
+ @commits = ();
+ while (<STDIN>) {
+ if (/\b([a-f\d]{6,40})\b/) {
+ unshift @commits, $1;
+ }
+ }
+ }
+ my @revs;
+ foreach my $c (@commits) {
+ chomp(my @tmp = safe_qx('git-rev-parse',$c));
+ if (scalar @tmp == 1) {
+ push @revs, $tmp[0];
+ } elsif (scalar @tmp > 1) {
+ push @revs, reverse (safe_qx('git-rev-list',@tmp));
+ } else {
+ die "Failed to rev-parse $c\n";
+ }
+ }
+ chomp @revs;
+
+ fetch();
+ chdir $SVN_WC or croak $!;
+ my $svn_current_rev = svn_info('.')->{'Last Changed Rev'};
+ foreach my $c (@revs) {
+ print "Committing $c\n";
+ my $mods = svn_checkout_tree($svn_current_rev, $c);
+ if (scalar @$mods == 0) {
+ print "Skipping, no changes detected\n";
+ next;
+ }
+ $svn_current_rev = svn_commit_tree($svn_current_rev, $c);
+ }
+ print "Done committing ",scalar @revs," revisions to SVN\n";
+
+}
+
+########################### utility functions #########################
+
+sub setup_git_svn {
+ defined $SVN_URL or croak "SVN repository location required\n";
+ unless (-d $GIT_DIR) {
+ croak "GIT_DIR=$GIT_DIR does not exist!\n";
+ }
+ mkpath(["$GIT_DIR/$GIT_SVN"]);
+ mkpath(["$GIT_DIR/$GIT_SVN/info"]);
+ mkpath([$REV_DIR]);
+ s_to_file($SVN_URL,"$GIT_DIR/$GIT_SVN/info/url");
+ my $uuid = svn_info($SVN_URL)->{'Repository UUID'} or
+ croak "Repository UUID unreadable\n";
+ s_to_file($uuid,"$GIT_DIR/$GIT_SVN/info/uuid");
+
+ open my $fd, '>>', "$GIT_DIR/$GIT_SVN/info/exclude" or croak $!;
+ print $fd '.svn',"\n";
+ close $fd or croak $!;
+ return $uuid;
+}
+
+sub assert_svn_wc_clean {
+ my ($svn_rev, $treeish) = @_;
+ croak "$svn_rev is not an integer!\n" unless ($svn_rev =~ /^\d+$/);
+ croak "$treeish is not a sha1!\n" unless ($treeish =~ /^$sha1$/o);
+ my $svn_info = svn_info('.');
+ if ($svn_rev != $svn_info->{'Last Changed Rev'}) {
+ croak "Expected r$svn_rev, got r",
+ $svn_info->{'Last Changed Rev'},"\n";
+ }
+ my @status = grep(!/^Performing status on external/,(`svn status`));
+ @status = grep(!/^\s*$/,@status);
+ if (scalar @status) {
+ print STDERR "Tree ($SVN_WC) is not clean:\n";
+ print STDERR $_ foreach @status;
+ croak;
+ }
+ assert_tree($treeish);
+}
+
+sub assert_tree {
+ my ($treeish) = @_;
+ croak "Not a sha1: $treeish\n" unless $treeish =~ /^$sha1$/o;
+ chomp(my $type = `git-cat-file -t $treeish`);
+ my $expected;
+ while ($type eq 'tag') {
+ chomp(($treeish, $type) = `git-cat-file tag $treeish`);
+ }
+ if ($type eq 'commit') {
+ $expected = (grep /^tree /,`git-cat-file commit $treeish`)[0];
+ ($expected) = ($expected =~ /^tree ($sha1)$/);
+ die "Unable to get tree from $treeish\n" unless $expected;
+ } elsif ($type eq 'tree') {
+ $expected = $treeish;
+ } else {
+ die "$treeish is a $type, expected tree, tag or commit\n";
+ }
+
+ my $old_index = $ENV{GIT_INDEX_FILE};
+ my $tmpindex = $GIT_SVN_INDEX.'.assert-tmp';
+ if (-e $tmpindex) {
+ unlink $tmpindex or croak $!;
+ }
+ $ENV{GIT_INDEX_FILE} = $tmpindex;
+ git_addremove();
+ chomp(my $tree = `git-write-tree`);
+ if ($old_index) {
+ $ENV{GIT_INDEX_FILE} = $old_index;
+ } else {
+ delete $ENV{GIT_INDEX_FILE};
+ }
+ if ($tree ne $expected) {
+ croak "Tree mismatch, Got: $tree, Expected: $expected\n";
+ }
+}
+
+sub parse_diff_tree {
+ my $diff_fh = shift;
+ local $/ = "\0";
+ my $state = 'meta';
+ my @mods;
+ while (<$diff_fh>) {
+ chomp $_; # this gets rid of the trailing "\0"
+ if ($state eq 'meta' && /^:(\d{6})\s(\d{6})\s
+ $sha1\s($sha1)\s([MTCRAD])\d*$/xo) {
+ push @mods, { mode_a => $1, mode_b => $2,
+ sha1_b => $3, chg => $4 };
+ if ($4 =~ /^(?:C|R)$/) {
+ $state = 'file_a';
+ } else {
+ $state = 'file_b';
+ }
+ } elsif ($state eq 'file_a') {
+ my $x = $mods[$#mods] or croak "Empty array\n";
+ if ($x->{chg} !~ /^(?:C|R)$/) {
+ croak "Error parsing $_, $x->{chg}\n";
+ }
+ $x->{file_a} = $_;
+ $state = 'file_b';
+ } elsif ($state eq 'file_b') {
+ my $x = $mods[$#mods] or croak "Empty array\n";
+ if (exists $x->{file_a} && $x->{chg} !~ /^(?:C|R)$/) {
+ croak "Error parsing $_, $x->{chg}\n";
+ }
+ if (!exists $x->{file_a} && $x->{chg} =~ /^(?:C|R)$/) {
+ croak "Error parsing $_, $x->{chg}\n";
+ }
+ $x->{file_b} = $_;
+ $state = 'meta';
+ } else {
+ croak "Error parsing $_\n";
+ }
+ }
+ close $diff_fh or croak $!;
+
+ return \@mods;
+}
+
+sub svn_check_prop_executable {
+ my $m = shift;
+ return if -l $m->{file_b};
+ if ($m->{mode_b} =~ /755$/) {
+ chmod((0755 &~ umask),$m->{file_b}) or croak $!;
+ if ($m->{mode_a} !~ /755$/) {
+ sys(qw(svn propset svn:executable 1), $m->{file_b});
+ }
+ -x $m->{file_b} or croak "$m->{file_b} is not executable!\n";
+ } elsif ($m->{mode_b} !~ /755$/ && $m->{mode_a} =~ /755$/) {
+ sys(qw(svn propdel svn:executable), $m->{file_b});
+ chmod((0644 &~ umask),$m->{file_b}) or croak $!;
+ -x $m->{file_b} and croak "$m->{file_b} is executable!\n";
+ }
+}
+
+sub svn_ensure_parent_path {
+ my $dir_b = dirname(shift);
+ svn_ensure_parent_path($dir_b) if ($dir_b ne File::Spec->curdir);
+ mkpath([$dir_b]) unless (-d $dir_b);
+ sys(qw(svn add -N), $dir_b) unless (-d "$dir_b/.svn");
+}
+
+sub precommit_check {
+ my $mods = shift;
+ my (%rm_file, %rmdir_check, %added_check);
+
+ my %o = ( D => 0, R => 1, C => 2, A => 3, M => 3, T => 3 );
+ foreach my $m (sort { $o{$a->{chg}} <=> $o{$b->{chg}} } @$mods) {
+ if ($m->{chg} eq 'R') {
+ if (-d $m->{file_b}) {
+ err_dir_to_file("$m->{file_a} => $m->{file_b}");
+ }
+ # dir/$file => dir/file/$file
+ my $dirname = dirname($m->{file_b});
+ while ($dirname ne File::Spec->curdir) {
+ if ($dirname ne $m->{file_a}) {
+ $dirname = dirname($dirname);
+ next;
+ }
+ err_file_to_dir("$m->{file_a} => $m->{file_b}");
+ }
+ # baz/zzz => baz (baz is a file)
+ $dirname = dirname($m->{file_a});
+ while ($dirname ne File::Spec->curdir) {
+ if ($dirname ne $m->{file_b}) {
+ $dirname = dirname($dirname);
+ next;
+ }
+ err_dir_to_file("$m->{file_a} => $m->{file_b}");
+ }
+ }
+ if ($m->{chg} =~ /^(D|R)$/) {
+ my $t = $1 eq 'D' ? 'file_b' : 'file_a';
+ $rm_file{ $m->{$t} } = 1;
+ my $dirname = dirname( $m->{$t} );
+ my $basename = basename( $m->{$t} );
+ $rmdir_check{$dirname}->{$basename} = 1;
+ } elsif ($m->{chg} =~ /^(?:A|C)$/) {
+ if (-d $m->{file_b}) {
+ err_dir_to_file($m->{file_b});
+ }
+ my $dirname = dirname( $m->{file_b} );
+ my $basename = basename( $m->{file_b} );
+ $added_check{$dirname}->{$basename} = 1;
+ while ($dirname ne File::Spec->curdir) {
+ if ($rm_file{$dirname}) {
+ err_file_to_dir($m->{file_b});
+ }
+ $dirname = dirname $dirname;
+ }
+ }
+ }
+ return (\%rmdir_check, \%added_check);
+
+ sub err_dir_to_file {
+ my $file = shift;
+ print STDERR "Node change from directory to file ",
+ "is not supported by Subversion: ",$file,"\n";
+ exit 1;
+ }
+ sub err_file_to_dir {
+ my $file = shift;
+ print STDERR "Node change from file to directory ",
+ "is not supported by Subversion: ",$file,"\n";
+ exit 1;
+ }
+}
+
+sub svn_checkout_tree {
+ my ($svn_rev, $treeish) = @_;
+ my $from = file_to_s("$REV_DIR/$svn_rev");
+ assert_svn_wc_clean($svn_rev,$from);
+ print "diff-tree '$from' '$treeish'\n";
+ my $pid = open my $diff_fh, '-|';
+ defined $pid or croak $!;
+ if ($pid == 0) {
+ my @diff_tree = qw(git-diff-tree -z -r -C);
+ push @diff_tree, '--find-copies-harder' if $_find_copies_harder;
+ push @diff_tree, "-l$_l" if defined $_l;
+ exec(@diff_tree, $from, $treeish) or croak $!;
+ }
+ my $mods = parse_diff_tree($diff_fh);
+ unless (@$mods) {
+ # git can do empty commits, SVN doesn't allow it...
+ return $mods;
+ }
+ my ($rm, $add) = precommit_check($mods);
+
+ my %o = ( D => 1, R => 0, C => -1, A => 3, M => 3, T => 3 );
+ foreach my $m (sort { $o{$a->{chg}} <=> $o{$b->{chg}} } @$mods) {
+ if ($m->{chg} eq 'C') {
+ svn_ensure_parent_path( $m->{file_b} );
+ sys(qw(svn cp), $m->{file_a}, $m->{file_b});
+ apply_mod_line_blob($m);
+ svn_check_prop_executable($m);
+ } elsif ($m->{chg} eq 'D') {
+ sys(qw(svn rm --force), $m->{file_b});
+ } elsif ($m->{chg} eq 'R') {
+ svn_ensure_parent_path( $m->{file_b} );
+ sys(qw(svn mv --force), $m->{file_a}, $m->{file_b});
+ apply_mod_line_blob($m);
+ svn_check_prop_executable($m);
+ } elsif ($m->{chg} eq 'M') {
+ apply_mod_line_blob($m);
+ svn_check_prop_executable($m);
+ } elsif ($m->{chg} eq 'T') {
+ sys(qw(svn rm --force),$m->{file_b});
+ apply_mod_line_blob($m);
+ sys(qw(svn add --force), $m->{file_b});
+ svn_check_prop_executable($m);
+ } elsif ($m->{chg} eq 'A') {
+ svn_ensure_parent_path( $m->{file_b} );
+ apply_mod_line_blob($m);
+ sys(qw(svn add --force), $m->{file_b});
+ svn_check_prop_executable($m);
+ } else {
+ croak "Invalid chg: $m->{chg}\n";
+ }
+ }
+
+ assert_tree($treeish);
+ if ($_rmdir) { # remove empty directories
+ handle_rmdir($rm, $add);
+ }
+ assert_tree($treeish);
+ return $mods;
+}
+
+# svn ls doesn't work with respect to the current working tree, but what's
+# in the repository. There's not even an option for it... *sigh*
+# (added files don't show up and removed files remain in the ls listing)
+sub svn_ls_current {
+ my ($dir, $rm, $add) = @_;
+ chomp(my @ls = safe_qx('svn','ls',$dir));
+ my @ret = ();
+ foreach (@ls) {
+ s#/$##; # trailing slashes are evil
+ push @ret, $_ unless $rm->{$dir}->{$_};
+ }
+ if (exists $add->{$dir}) {
+ push @ret, keys %{$add->{$dir}};
+ }
+ return \@ret;
+}
+
+sub handle_rmdir {
+ my ($rm, $add) = @_;
+
+ foreach my $dir (sort {length $b <=> length $a} keys %$rm) {
+ my $ls = svn_ls_current($dir, $rm, $add);
+ next if (scalar @$ls);
+ sys(qw(svn rm --force),$dir);
+
+ my $dn = dirname $dir;
+ $rm->{ $dn }->{ basename $dir } = 1;
+ $ls = svn_ls_current($dn, $rm, $add);
+ while (scalar @$ls == 0 && $dn ne File::Spec->curdir) {
+ sys(qw(svn rm --force),$dn);
+ $dir = basename $dn;
+ $dn = dirname $dn;
+ $rm->{ $dn }->{ $dir } = 1;
+ $ls = svn_ls_current($dn, $rm, $add);
+ }
+ }
+}
+
+sub svn_commit_tree {
+ my ($svn_rev, $commit) = @_;
+ my $commit_msg = "$GIT_DIR/$GIT_SVN/.svn-commit.tmp.$$";
+ open my $msg, '>', $commit_msg or croak $!;
+
+ chomp(my $type = `git-cat-file -t $commit`);
+ if ($type eq 'commit') {
+ my $pid = open my $msg_fh, '-|';
+ defined $pid or croak $!;
+
+ if ($pid == 0) {
+ exec(qw(git-cat-file commit), $commit) or croak $!;
+ }
+ my $in_msg = 0;
+ while (<$msg_fh>) {
+ if (!$in_msg) {
+ $in_msg = 1 if (/^\s*$/);
+ } else {
+ print $msg $_ or croak $!;
+ }
+ }
+ close $msg_fh or croak $!;
+ }
+ close $msg or croak $!;
+
+ if ($_edit || ($type eq 'tree')) {
+ my $editor = $ENV{VISUAL} || $ENV{EDITOR} || 'vi';
+ system($editor, $commit_msg);
+ }
+ my @ci_output = safe_qx(qw(svn commit -F),$commit_msg);
+ my ($committed) = grep(/^Committed revision \d+\./,@ci_output);
+ unlink $commit_msg;
+ defined $committed or croak
+ "Commit output failed to parse committed revision!\n",
+ join("\n",@ci_output),"\n";
+ my ($rev_committed) = ($committed =~ /^Committed revision (\d+)\./);
+
+ # resync immediately
+ my @svn_up = (qw(svn up), "-r$svn_rev");
+ push @svn_up, '--ignore-externals' unless $_no_ignore_ext;
+ sys(@svn_up);
+ return fetch("$rev_committed=$commit")->{revision};
+}
+
+sub svn_log_raw {
+ my (@log_args) = @_;
+ my $pid = open my $log_fh,'-|';
+ defined $pid or croak $!;
+
+ if ($pid == 0) {
+ exec (qw(svn log), @log_args) or croak $!
+ }
+
+ my @svn_log;
+ my $state = 'sep';
+ while (<$log_fh>) {
+ chomp;
+ if (/^\-{72}$/) {
+ if ($state eq 'msg') {
+ if ($svn_log[$#svn_log]->{lines}) {
+ $svn_log[$#svn_log]->{msg} .= $_."\n";
+ unless(--$svn_log[$#svn_log]->{lines}) {
+ $state = 'sep';
+ }
+ } else {
+ croak "Log parse error at: $_\n",
+ $svn_log[$#svn_log]->{revision},
+ "\n";
+ }
+ next;
+ }
+ if ($state ne 'sep') {
+ croak "Log parse error at: $_\n",
+ "state: $state\n",
+ $svn_log[$#svn_log]->{revision},
+ "\n";
+ }
+ $state = 'rev';
+
+ # if we have an empty log message, put something there:
+ if (@svn_log) {
+ $svn_log[$#svn_log]->{msg} ||= "\n";
+ delete $svn_log[$#svn_log]->{lines};
+ }
+ next;
+ }
+ if ($state eq 'rev' && s/^r(\d+)\s*\|\s*//) {
+ my $rev = $1;
+ my ($author, $date, $lines) = split(/\s*\|\s*/, $_, 3);
+ ($lines) = ($lines =~ /(\d+)/);
+ my ($Y,$m,$d,$H,$M,$S,$tz) = ($date =~
+ /(\d{4})\-(\d\d)\-(\d\d)\s
+ (\d\d)\:(\d\d)\:(\d\d)\s([\-\+]\d+)/x)
+ or croak "Failed to parse date: $date\n";
+ my %log_msg = ( revision => $rev,
+ date => "$tz $Y-$m-$d $H:$M:$S",
+ author => $author,
+ lines => $lines,
+ msg => '' );
+ push @svn_log, \%log_msg;
+ $state = 'msg_start';
+ next;
+ }
+ # skip the first blank line of the message:
+ if ($state eq 'msg_start' && /^$/) {
+ $state = 'msg';
+ } elsif ($state eq 'msg') {
+ if ($svn_log[$#svn_log]->{lines}) {
+ $svn_log[$#svn_log]->{msg} .= $_."\n";
+ unless (--$svn_log[$#svn_log]->{lines}) {
+ $state = 'sep';
+ }
+ } else {
+ croak "Log parse error at: $_\n",
+ $svn_log[$#svn_log]->{revision},"\n";
+ }
+ }
+ }
+ close $log_fh or croak $?;
+ return \@svn_log;
+}
+
+sub svn_info {
+ my $url = shift || $SVN_URL;
+
+ my $pid = open my $info_fh, '-|';
+ defined $pid or croak $!;
+
+ if ($pid == 0) {
+ exec(qw(svn info),$url) or croak $!;
+ }
+
+ my $ret = {};
+ # only single-lines seem to exist in svn info output
+ while (<$info_fh>) {
+ chomp $_;
+ if (m#^([^:]+)\s*:\s*(\S*)$#) {
+ $ret->{$1} = $2;
+ push @{$ret->{-order}}, $1;
+ }
+ }
+ close $info_fh or croak $!;
+ return $ret;
+}
+
+sub sys { system(@_) == 0 or croak $? }
+
+sub git_addremove {
+ system( "git-diff-files --name-only -z ".
+ " | git-update-index --remove -z --stdin && ".
+ "git-ls-files -z --others ".
+ "'--exclude-from=$GIT_DIR/$GIT_SVN/info/exclude'".
+ " | git-update-index --add -z --stdin"
+ ) == 0 or croak $?
+}
+
+sub s_to_file {
+ my ($str, $file, $mode) = @_;
+ open my $fd,'>',$file or croak $!;
+ print $fd $str,"\n" or croak $!;
+ close $fd or croak $!;
+ chmod ($mode &~ umask, $file) if (defined $mode);
+}
+
+sub file_to_s {
+ my $file = shift;
+ open my $fd,'<',$file or croak "$!: file: $file\n";
+ local $/;
+ my $ret = <$fd>;
+ close $fd or croak $!;
+ $ret =~ s/\s*$//s;
+ return $ret;
+}
+
+sub assert_revision_unknown {
+ my $revno = shift;
+ if (-f "$REV_DIR/$revno") {
+ croak "$REV_DIR/$revno already exists! ",
+ "Why are we refetching it?";
+ }
+}
+
+sub assert_revision_eq_or_unknown {
+ my ($revno, $commit) = @_;
+ if (-f "$REV_DIR/$revno") {
+ my $current = file_to_s("$REV_DIR/$revno");
+ if ($commit ne $current) {
+ croak "$REV_DIR/$revno already exists!\n",
+ "current: $current\nexpected: $commit\n";
+ }
+ return;
+ }
+}
+
+sub git_commit {
+ my ($log_msg, @parents) = @_;
+ assert_revision_unknown($log_msg->{revision});
+ my $out_fh = IO::File->new_tmpfile or croak $!;
+ my $info = svn_info('.');
+ my $uuid = $info->{'Repository UUID'};
+ defined $uuid or croak "Unable to get Repository UUID\n";
+
+ # commit parents can be conditionally bound to a particular
+ # svn revision via: "svn_revno=commit_sha1", filter them out here:
+ my @exec_parents;
+ foreach my $p (@parents) {
+ next unless defined $p;
+ if ($p =~ /^(\d+)=($sha1_short)$/o) {
+ if ($1 == $log_msg->{revision}) {
+ push @exec_parents, $2;
+ }
+ } else {
+ push @exec_parents, $p if $p =~ /$sha1_short/o;
+ }
+ }
+
+ my $pid = fork;
+ defined $pid or croak $!;
+ if ($pid == 0) {
+ $ENV{GIT_INDEX_FILE} = $GIT_SVN_INDEX;
+ git_addremove();
+ chomp(my $tree = `git-write-tree`);
+ croak if $?;
+ my $msg_fh = IO::File->new_tmpfile or croak $!;
+ print $msg_fh $log_msg->{msg}, "\ngit-svn-id: ",
+ "$SVN_URL\@$log_msg->{revision}",
+ " $uuid\n" or croak $!;
+ $msg_fh->flush == 0 or croak $!;
+ seek $msg_fh, 0, 0 or croak $!;
+
+ $ENV{GIT_AUTHOR_NAME} = $ENV{GIT_COMMITTER_NAME} =
+ $log_msg->{author};
+ $ENV{GIT_AUTHOR_EMAIL} = $ENV{GIT_COMMITTER_EMAIL} =
+ $log_msg->{author}."\@$uuid";
+ $ENV{GIT_AUTHOR_DATE} = $ENV{GIT_COMMITTER_DATE} =
+ $log_msg->{date};
+ my @exec = ('git-commit-tree',$tree);
+ push @exec, '-p', $_ foreach @exec_parents;
+ open STDIN, '<&', $msg_fh or croak $!;
+ open STDOUT, '>&', $out_fh or croak $!;
+ exec @exec or croak $!;
+ }
+ waitpid($pid,0);
+ croak if $?;
+
+ $out_fh->flush == 0 or croak $!;
+ seek $out_fh, 0, 0 or croak $!;
+ chomp(my $commit = do { local $/; <$out_fh> });
+ if ($commit !~ /^$sha1$/o) {
+ croak "Failed to commit, invalid sha1: $commit\n";
+ }
+ my @update_ref = ('git-update-ref',"refs/heads/$GIT_SVN-HEAD",$commit);
+ if (my $primary_parent = shift @exec_parents) {
+ push @update_ref, $primary_parent;
+ }
+ sys(@update_ref);
+ sys('git-update-ref',"$GIT_SVN/revs/$log_msg->{revision}",$commit);
+ print "r$log_msg->{revision} = $commit\n";
+ return $commit;
+}
+
+sub apply_mod_line_blob {
+ my $m = shift;
+ if ($m->{mode_b} =~ /^120/) {
+ blob_to_symlink($m->{sha1_b}, $m->{file_b});
+ } else {
+ blob_to_file($m->{sha1_b}, $m->{file_b});
+ }
+}
+
+sub blob_to_symlink {
+ my ($blob, $link) = @_;
+ defined $link or croak "\$link not defined!\n";
+ croak "Not a sha1: $blob\n" unless $blob =~ /^$sha1$/o;
+ if (-l $link || -f _) {
+ unlink $link or croak $!;
+ }
+
+ my $dest = `git-cat-file blob $blob`; # no newline, so no chomp
+ symlink $dest, $link or croak $!;
+}
+
+sub blob_to_file {
+ my ($blob, $file) = @_;
+ defined $file or croak "\$file not defined!\n";
+ croak "Not a sha1: $blob\n" unless $blob =~ /^$sha1$/o;
+ if (-l $file || -f _) {
+ unlink $file or croak $!;
+ }
+
+ open my $blob_fh, '>', $file or croak "$!: $file\n";
+ my $pid = fork;
+ defined $pid or croak $!;
+
+ if ($pid == 0) {
+ open STDOUT, '>&', $blob_fh or croak $!;
+ exec('git-cat-file','blob',$blob);
+ }
+ waitpid $pid, 0;
+ croak $? if $?;
+
+ close $blob_fh or croak $!;
+}
+
+sub safe_qx {
+ my $pid = open my $child, '-|';
+ defined $pid or croak $!;
+ if ($pid == 0) {
+ exec(@_) or croak $?;
+ }
+ my @ret = (<$child>);
+ close $child or croak $?;
+ die $? if $?; # just in case close didn't error out
+ return wantarray ? @ret : join('',@ret);
+}
+
+sub svn_check_ignore_externals {
+ return if $_no_ignore_ext;
+ unless (grep /ignore-externals/,(safe_qx(qw(svn co -h)))) {
+ print STDERR "W: Installed svn version does not support ",
+ "--ignore-externals\n";
+ $_no_ignore_ext = 1;
+ }
+}
+__END__
+
+Data structures:
+
+@svn_log = array of log_msg hashes
+
+$log_msg hash
+{
+ msg => 'whitespace-formatted log entry
+', # trailing newline is preserved
+ revision => '8', # integer
+ date => '2004-02-24T17:01:44.108345Z', # commit date
+ author => 'committer name'
+};
+
+
+@mods = array of diff-index line hashes, each element represents one line
+ of diff-index output
+
+diff-index line ($m hash)
+{
+ mode_a => first column of diff-index output, no leading ':',
+ mode_b => second column of diff-index output,
+ sha1_b => sha1sum of the final blob,
+ chg => change type [MCRAD],
+ file_a => original file name of a file (iff chg is 'C' or 'R')
+ file_b => new/current file name of a file (any chg)
+}
+;
--- /dev/null
+git-svn(1)
+==========
+
+NAME
+----
+git-svn - bidirectional operation between a single Subversion branch and git
+
+SYNOPSIS
+--------
+'git-svn' <command> [options] [arguments]
+
+DESCRIPTION
+-----------
+git-svn is a simple conduit for changesets between a single Subversion
+branch and git.
+
+git-svn is not to be confused with git-svnimport. The were designed
+with very different goals in mind.
+
+git-svn is designed for an individual developer who wants a
+bidirectional flow of changesets between a single branch in Subversion
+and an arbitrary number of branches in git. git-svnimport is designed
+for read-only operation on repositories that match a particular layout
+(albeit the recommended one by SVN developers).
+
+For importing svn, git-svnimport is potentially more powerful when
+operating on repositories organized under the recommended
+trunk/branch/tags structure, and should be faster, too.
+
+git-svn completely ignores the very limited view of branching that
+Subversion has. This allows git-svn to be much easier to use,
+especially on repositories that are not organized in a manner that
+git-svnimport is designed for.
+
+COMMANDS
+--------
+init::
+ Creates an empty git repository with additional metadata
+ directories for git-svn. The SVN_URL must be specified
+ at this point.
+
+fetch::
+ Fetch unfetched revisions from the SVN_URL we are tracking.
+ refs/heads/git-svn-HEAD will be updated to the latest revision.
+
+commit::
+ Commit specified commit or tree objects to SVN. This relies on
+ your imported fetch data being up-to-date. This makes
+ absolutely no attempts to do patching when committing to SVN, it
+ simply overwrites files with those specified in the tree or
+ commit. All merging is assumed to have taken place
+ independently of git-svn functions.
+
+rebuild::
+ Not a part of daily usage, but this is a useful command if
+ you've just cloned a repository (using git-clone) that was
+ tracked with git-svn. Unfortunately, git-clone does not clone
+ git-svn metadata and the svn working tree that git-svn uses for
+ its operations. This rebuilds the metadata so git-svn can
+ resume fetch operations. SVN_URL may be optionally specified if
+ the directory/repository you're tracking has moved or changed
+ protocols.
+
+OPTIONS
+-------
+-r <ARG>::
+--revision <ARG>::
+ Only used with the 'fetch' command.
+
+ Takes any valid -r<argument> svn would accept and passes it
+ directly to svn. -r<ARG1>:<ARG2> ranges and "{" DATE "}" syntax
+ is also supported. This is passed directly to svn, see svn
+ documentation for more details.
+
+ This can allow you to make partial mirrors when running fetch.
+
+-::
+--stdin::
+ Only used with the 'commit' command.
+
+ Read a list of commits from stdin and commit them in reverse
+ order. Only the leading sha1 is read from each line, so
+ git-rev-list --pretty=oneline output can be used.
+
+--rmdir::
+ Only used with the 'commit' command.
+
+ Remove directories from the SVN tree if there are no files left
+ behind. SVN can version empty directories, and they are not
+ removed by default if there are no files left in them. git
+ cannot version empty directories. Enabling this flag will make
+ the commit to SVN act like git.
+
+-e::
+--edit::
+ Only used with the 'commit' command.
+
+ Edit the commit message before committing to SVN. This is off by
+ default for objects that are commits, and forced on when committing
+ tree objects.
+
+-l<num>::
+--find-copies-harder::
+ Both of these are only used with the 'commit' command.
+
+ They are both passed directly to git-diff-tree see
+ git-diff-tree(1) for more information.
+
+COMPATIBILITY OPTIONS
+---------------------
+--no-ignore-externals::
+ Only used with the 'fetch' and 'rebuild' command.
+
+ By default, git-svn passes --ignore-externals to svn to avoid
+ fetching svn:external trees into git. Pass this flag to enable
+ externals tracking directly via git.
+
+ Versions of svn that do not support --ignore-externals are
+ automatically detected and this flag will be automatically
+ enabled for them.
+
+ Otherwise, do not enable this flag unless you know what you're
+ doing.
+
+--no-stop-on-copy::
+ Only used with the 'fetch' command.
+
+ By default, git-svn passes --stop-on-copy to avoid dealing with
+ the copied/renamed branch directory problem entirely. A
+ copied/renamed branch is the result of a <SVN_URL> being created
+ in the past from a different source. These are problematic to
+ deal with even when working purely with svn if you work inside
+ subdirectories.
+
+ Do not use this flag unless you know exactly what you're getting
+ yourself into. You have been warned.
+
+Examples
+~~~~~~~~
+
+Tracking and contributing to an Subversion managed-project:
+
+# Initialize a tree (like git init-db)::
+ git-svn init http://svn.foo.org/project/trunk
+# Fetch remote revisions::
+ git-svn fetch
+# Create your own branch to hack on::
+ git checkout -b my-branch git-svn-HEAD
+# Commit only the git commits you want to SVN::
+ git-svn commit <tree-ish> [<tree-ish_2> ...]
+# Commit all the git commits from my-branch that don't exist in SVN::
+ git commit git-svn-HEAD..my-branch
+# Something is committed to SVN, pull the latest into your branch::
+ git-svn fetch && git pull . git-svn-HEAD
+
+DESIGN PHILOSOPHY
+-----------------
+Merge tracking in Subversion is lacking and doing branched development
+with Subversion is cumbersome as a result. git-svn completely forgoes
+any automated merge/branch tracking on the Subversion side and leaves it
+entirely up to the user on the git side. It's simply not worth it to do
+a useful translation when the the original signal is weak.
+
+TRACKING MULTIPLE REPOSITORIES OR BRANCHES
+------------------------------------------
+This is for advanced users, most users should ignore this section.
+
+Because git-svn does not care about relationships between different
+branches or directories in a Subversion repository, git-svn has a simple
+hack to allow it to track an arbitrary number of related _or_ unrelated
+SVN repositories via one git repository. Simply set the GIT_SVN_ID
+environment variable to a name other other than "git-svn" (the default)
+and git-svn will ignore the contents of the $GIT_DIR/git-svn directory
+and instead do all of its work in $GIT_DIR/$GIT_SVN_ID for that
+invocation.
+
+ADDITIONAL FETCH ARGUMENTS
+--------------------------
+This is for advanced users, most users should ignore this section.
+
+Unfetched SVN revisions may be imported as children of existing commits
+by specifying additional arguments to 'fetch'. Additional parents may
+optionally be specified in the form of sha1 hex sums at the
+command-line. Unfetched SVN revisions may also be tied to particular
+git commits with the following syntax:
+
+ svn_revision_number=git_commit_sha1
+
+This allows you to tie unfetched SVN revision 375 to your current HEAD::
+
+ git-svn fetch 375=$(git-rev-parse HEAD)
+
+BUGS
+----
+If somebody commits a conflicting changeset to SVN at a bad moment
+(right before you commit) causing a conflict and your commit to fail,
+your svn working tree ($GIT_DIR/git-svn/tree) may be dirtied. The
+easiest thing to do is probably just to rm -rf $GIT_DIR/git-svn/tree and
+run 'rebuild'.
+
+We ignore all SVN properties except svn:executable. Too difficult to
+map them since we rely heavily on git write-tree being _exactly_ the
+same on both the SVN and git working trees and I prefer not to clutter
+working trees with metadata files.
+
+svn:keywords can't be ignored in Subversion (at least I don't know of
+a way to ignore them).
+
+Renamed and copied directories are not detected by git and hence not
+tracked when committing to SVN. I do not plan on adding support for
+this as it's quite difficult and time-consuming to get working for all
+the possible corner cases (git doesn't do it, either). Renamed and
+copied files are fully supported if they're similar enough for git to
+detect them.
+
+Author
+------
+Written by Eric Wong <normalperson@yhbt.net>.
+
+Documentation
+-------------
+Written by Eric Wong <normalperson@yhbt.net>.
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2006 Eric Wong
+#
+
+
+PATH=$PWD/../:$PATH
+test_description='git-svn tests'
+if test -d ../../../t
+then
+ cd ../../../t
+else
+ echo "Must be run in contrib/git-svn/t" >&2
+ exit 1
+fi
+
+. ./test-lib.sh
+
+GIT_DIR=$PWD/.git
+GIT_SVN_DIR=$GIT_DIR/git-svn
+SVN_TREE=$GIT_SVN_DIR/tree
+
+svnadmin >/dev/null 2>&1
+if test $? != 1
+then
+ test_expect_success 'skipping contrib/git-svn test' :
+ test_done
+ exit
+fi
+
+svn >/dev/null 2>&1
+if test $? != 1
+then
+ test_expect_success 'skipping contrib/git-svn test' :
+ test_done
+ exit
+fi
+
+svnrepo=$PWD/svnrepo
+
+set -e
+
+svnadmin create $svnrepo
+svnrepo="file://$svnrepo/test-git-svn"
+
+mkdir import
+
+cd import
+
+echo foo > foo
+ln -s foo foo.link
+mkdir -p dir/a/b/c/d/e
+echo 'deep dir' > dir/a/b/c/d/e/file
+mkdir -p bar
+echo 'zzz' > bar/zzz
+echo '#!/bin/sh' > exec.sh
+chmod +x exec.sh
+svn import -m 'import for git-svn' . $svnrepo >/dev/null
+
+cd ..
+
+rm -rf import
+
+test_expect_success \
+ 'initialize git-svn' \
+ "git-svn init $svnrepo"
+
+test_expect_success \
+ 'import an SVN revision into git' \
+ 'git-svn fetch'
+
+
+name='try a deep --rmdir with a commit'
+git checkout -b mybranch git-svn-HEAD
+mv dir/a/b/c/d/e/file dir/file
+cp dir/file file
+git update-index --add --remove dir/a/b/c/d/e/file dir/file file
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch &&
+ test -d $SVN_TREE/dir && test ! -d $SVN_TREE/dir/a"
+
+
+name='detect node change from file to directory #1'
+mkdir dir/new_file
+mv dir/file dir/new_file/file
+mv dir/new_file dir/file
+git update-index --remove dir/file
+git update-index --add dir/file/file
+git commit -m "$name"
+
+test_expect_code 1 "$name" \
+ 'git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch' \
+ || true
+
+
+name='detect node change from directory to file #1'
+rm -rf dir $GIT_DIR/index
+git checkout -b mybranch2 git-svn-HEAD
+mv bar/zzz zzz
+rm -rf bar
+mv zzz bar
+git update-index --remove -- bar/zzz
+git update-index --add -- bar
+git commit -m "$name"
+
+test_expect_code 1 "$name" \
+ 'git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch2' \
+ || true
+
+
+name='detect node change from file to directory #2'
+rm -f $GIT_DIR/index
+git checkout -b mybranch3 git-svn-HEAD
+rm bar/zzz
+git-update-index --remove bar/zzz
+mkdir bar/zzz
+echo yyy > bar/zzz/yyy
+git-update-index --add bar/zzz/yyy
+git commit -m "$name"
+
+test_expect_code 1 "$name" \
+ 'git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch3' \
+ || true
+
+
+name='detect node change from directory to file #2'
+rm -f $GIT_DIR/index
+git checkout -b mybranch4 git-svn-HEAD
+rm -rf dir
+git update-index --remove -- dir/file
+touch dir
+echo asdf > dir
+git update-index --add -- dir
+git commit -m "$name"
+
+test_expect_code 1 "$name" \
+ 'git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch4' \
+ || true
+
+
+name='remove executable bit from a file'
+rm -f $GIT_DIR/index
+git checkout -b mybranch5 git-svn-HEAD
+chmod -x exec.sh
+git update-index exec.sh
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch5 &&
+ test ! -x $SVN_TREE/exec.sh"
+
+
+name='add executable bit back file'
+chmod +x exec.sh
+git update-index exec.sh
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch5 &&
+ test -x $SVN_TREE/exec.sh"
+
+
+
+name='executable file becomes a symlink to bar/zzz (file)'
+rm exec.sh
+ln -s bar/zzz exec.sh
+git update-index exec.sh
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch5 &&
+ test -L $SVN_TREE/exec.sh"
+
+
+
+name='new symlink is added to a file that was also just made executable'
+chmod +x bar/zzz
+ln -s bar/zzz exec-2.sh
+git update-index --add bar/zzz exec-2.sh
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch5 &&
+ test -x $SVN_TREE/bar/zzz &&
+ test -L $SVN_TREE/exec-2.sh"
+
+
+
+name='modify a symlink to become a file'
+git help > help || true
+rm exec-2.sh
+cp help exec-2.sh
+git update-index exec-2.sh
+git commit -m "$name"
+
+test_expect_success "$name" \
+ "git-svn commit --find-copies-harder --rmdir git-svn-HEAD..mybranch5 &&
+ test -f $SVN_TREE/exec-2.sh &&
+ test ! -L $SVN_TREE/exec-2.sh &&
+ diff -u help $SVN_TREE/exec-2.sh"
+
+
+
+name='test fetch functionality (svn => git) with alternate GIT_SVN_ID'
+GIT_SVN_ID=alt
+export GIT_SVN_ID
+test_expect_success "$name" \
+ "git-svn init $svnrepo && git-svn fetch -v &&
+ git-rev-list --pretty=raw git-svn-HEAD | grep ^tree | uniq > a &&
+ git-rev-list --pretty=raw alt-HEAD | grep ^tree | uniq > b &&
+ diff -u a b"
+
+test_done
+
--- /dev/null
+#! /usr/bin/env python
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+""" gitview
+GUI browser for git repository
+This program is based on bzrk by Scott James Remnant <scott@ubuntu.com>
+"""
+__copyright__ = "Copyright (C) 2006 Hewlett-Packard Development Company, L.P."
+__author__ = "Aneesh Kumar K.V <aneesh.kumar@hp.com>"
+
+
+import sys
+import os
+import gtk
+import pygtk
+import pango
+import re
+import time
+import gobject
+import cairo
+import math
+import string
+
+try:
+ import gtksourceview
+ have_gtksourceview = True
+except ImportError:
+ have_gtksourceview = False
+ print "Running without gtksourceview module"
+
+re_ident = re.compile('(author|committer) (?P<ident>.*) (?P<epoch>\d+) (?P<tz>[+-]\d{4})')
+
+def list_to_string(args, skip):
+ count = len(args)
+ i = skip
+ str_arg=" "
+ while (i < count ):
+ str_arg = str_arg + args[i]
+ str_arg = str_arg + " "
+ i = i+1
+
+ return str_arg
+
+def show_date(epoch, tz):
+ secs = float(epoch)
+ tzsecs = float(tz[1:3]) * 3600
+ tzsecs += float(tz[3:5]) * 60
+ if (tz[0] == "+"):
+ secs += tzsecs
+ else:
+ secs -= tzsecs
+
+ return time.strftime("%Y-%m-%d %H:%M:%S", time.gmtime(secs))
+
+def get_sha1_from_tags(line):
+ fp = os.popen("git cat-file -t " + line)
+ entry = string.strip(fp.readline())
+ fp.close()
+ if (entry == "commit"):
+ return line
+ elif (entry == "tag"):
+ fp = os.popen("git cat-file tag "+ line)
+ entry = string.strip(fp.readline())
+ fp.close()
+ obj = re.split(" ", entry)
+ if (obj[0] == "object"):
+ return obj[1]
+ return None
+
+class CellRendererGraph(gtk.GenericCellRenderer):
+ """Cell renderer for directed graph.
+
+ This module contains the implementation of a custom GtkCellRenderer that
+ draws part of the directed graph based on the lines suggested by the code
+ in graph.py.
+
+ Because we're shiny, we use Cairo to do this, and because we're naughty
+ we cheat and draw over the bits of the TreeViewColumn that are supposed to
+ just be for the background.
+
+ Properties:
+ node (column, colour, [ names ]) tuple to draw revision node,
+ in_lines (start, end, colour) tuple list to draw inward lines,
+ out_lines (start, end, colour) tuple list to draw outward lines.
+ """
+
+ __gproperties__ = {
+ "node": ( gobject.TYPE_PYOBJECT, "node",
+ "revision node instruction",
+ gobject.PARAM_WRITABLE
+ ),
+ "in-lines": ( gobject.TYPE_PYOBJECT, "in-lines",
+ "instructions to draw lines into the cell",
+ gobject.PARAM_WRITABLE
+ ),
+ "out-lines": ( gobject.TYPE_PYOBJECT, "out-lines",
+ "instructions to draw lines out of the cell",
+ gobject.PARAM_WRITABLE
+ ),
+ }
+
+ def do_set_property(self, property, value):
+ """Set properties from GObject properties."""
+ if property.name == "node":
+ self.node = value
+ elif property.name == "in-lines":
+ self.in_lines = value
+ elif property.name == "out-lines":
+ self.out_lines = value
+ else:
+ raise AttributeError, "no such property: '%s'" % property.name
+
+ def box_size(self, widget):
+ """Calculate box size based on widget's font.
+
+ Cache this as it's probably expensive to get. It ensures that we
+ draw the graph at least as large as the text.
+ """
+ try:
+ return self._box_size
+ except AttributeError:
+ pango_ctx = widget.get_pango_context()
+ font_desc = widget.get_style().font_desc
+ metrics = pango_ctx.get_metrics(font_desc)
+
+ ascent = pango.PIXELS(metrics.get_ascent())
+ descent = pango.PIXELS(metrics.get_descent())
+
+ self._box_size = ascent + descent + 6
+ return self._box_size
+
+ def set_colour(self, ctx, colour, bg, fg):
+ """Set the context source colour.
+
+ Picks a distinct colour based on an internal wheel; the bg
+ parameter provides the value that should be assigned to the 'zero'
+ colours and the fg parameter provides the multiplier that should be
+ applied to the foreground colours.
+ """
+ colours = [
+ ( 1.0, 0.0, 0.0 ),
+ ( 1.0, 1.0, 0.0 ),
+ ( 0.0, 1.0, 0.0 ),
+ ( 0.0, 1.0, 1.0 ),
+ ( 0.0, 0.0, 1.0 ),
+ ( 1.0, 0.0, 1.0 ),
+ ]
+
+ colour %= len(colours)
+ red = (colours[colour][0] * fg) or bg
+ green = (colours[colour][1] * fg) or bg
+ blue = (colours[colour][2] * fg) or bg
+
+ ctx.set_source_rgb(red, green, blue)
+
+ def on_get_size(self, widget, cell_area):
+ """Return the size we need for this cell.
+
+ Each cell is drawn individually and is only as wide as it needs
+ to be, we let the TreeViewColumn take care of making them all
+ line up.
+ """
+ box_size = self.box_size(widget)
+
+ cols = self.node[0]
+ for start, end, colour in self.in_lines + self.out_lines:
+ cols = max(cols, start, end)
+
+ (column, colour, names) = self.node
+ names_len = 0
+ if (len(names) != 0):
+ for item in names:
+ names_len += len(item)/3
+
+ width = box_size * (cols + 1 + names_len )
+ height = box_size
+
+ # FIXME I have no idea how to use cell_area properly
+ return (0, 0, width, height)
+
+ def on_render(self, window, widget, bg_area, cell_area, exp_area, flags):
+ """Render an individual cell.
+
+ Draws the cell contents using cairo, taking care to clip what we
+ do to within the background area so we don't draw over other cells.
+ Note that we're a bit naughty there and should really be drawing
+ in the cell_area (or even the exposed area), but we explicitly don't
+ want any gutter.
+
+ We try and be a little clever, if the line we need to draw is going
+ to cross other columns we actually draw it as in the .---' style
+ instead of a pure diagonal ... this reduces confusion by an
+ incredible amount.
+ """
+ ctx = window.cairo_create()
+ ctx.rectangle(bg_area.x, bg_area.y, bg_area.width, bg_area.height)
+ ctx.clip()
+
+ box_size = self.box_size(widget)
+
+ ctx.set_line_width(box_size / 8)
+ ctx.set_line_cap(cairo.LINE_CAP_SQUARE)
+
+ # Draw lines into the cell
+ for start, end, colour in self.in_lines:
+ ctx.move_to(cell_area.x + box_size * start + box_size / 2,
+ bg_area.y - bg_area.height / 2)
+
+ if start - end > 1:
+ ctx.line_to(cell_area.x + box_size * start, bg_area.y)
+ ctx.line_to(cell_area.x + box_size * end + box_size, bg_area.y)
+ elif start - end < -1:
+ ctx.line_to(cell_area.x + box_size * start + box_size,
+ bg_area.y)
+ ctx.line_to(cell_area.x + box_size * end, bg_area.y)
+
+ ctx.line_to(cell_area.x + box_size * end + box_size / 2,
+ bg_area.y + bg_area.height / 2)
+
+ self.set_colour(ctx, colour, 0.0, 0.65)
+ ctx.stroke()
+
+ # Draw lines out of the cell
+ for start, end, colour in self.out_lines:
+ ctx.move_to(cell_area.x + box_size * start + box_size / 2,
+ bg_area.y + bg_area.height / 2)
+
+ if start - end > 1:
+ ctx.line_to(cell_area.x + box_size * start,
+ bg_area.y + bg_area.height)
+ ctx.line_to(cell_area.x + box_size * end + box_size,
+ bg_area.y + bg_area.height)
+ elif start - end < -1:
+ ctx.line_to(cell_area.x + box_size * start + box_size,
+ bg_area.y + bg_area.height)
+ ctx.line_to(cell_area.x + box_size * end,
+ bg_area.y + bg_area.height)
+
+ ctx.line_to(cell_area.x + box_size * end + box_size / 2,
+ bg_area.y + bg_area.height / 2 + bg_area.height)
+
+ self.set_colour(ctx, colour, 0.0, 0.65)
+ ctx.stroke()
+
+ # Draw the revision node in the right column
+ (column, colour, names) = self.node
+ ctx.arc(cell_area.x + box_size * column + box_size / 2,
+ cell_area.y + cell_area.height / 2,
+ box_size / 4, 0, 2 * math.pi)
+
+
+ if (len(names) != 0):
+ name = " "
+ for item in names:
+ name = name + item + " "
+
+ ctx.text_path(name)
+
+ self.set_colour(ctx, colour, 0.0, 0.5)
+ ctx.stroke_preserve()
+
+ self.set_colour(ctx, colour, 0.5, 1.0)
+ ctx.fill()
+
+class Commit:
+ """ This represent a commit object obtained after parsing the git-rev-list
+ output """
+
+ children_sha1 = {}
+
+ def __init__(self, commit_lines):
+ self.message = ""
+ self.author = ""
+ self.date = ""
+ self.committer = ""
+ self.commit_date = ""
+ self.commit_sha1 = ""
+ self.parent_sha1 = [ ]
+ self.parse_commit(commit_lines)
+
+
+ def parse_commit(self, commit_lines):
+
+ # First line is the sha1 lines
+ line = string.strip(commit_lines[0])
+ sha1 = re.split(" ", line)
+ self.commit_sha1 = sha1[0]
+ self.parent_sha1 = sha1[1:]
+
+ #build the child list
+ for parent_id in self.parent_sha1:
+ try:
+ Commit.children_sha1[parent_id].append(self.commit_sha1)
+ except KeyError:
+ Commit.children_sha1[parent_id] = [self.commit_sha1]
+
+ # IF we don't have parent
+ if (len(self.parent_sha1) == 0):
+ self.parent_sha1 = [0]
+
+ for line in commit_lines[1:]:
+ m = re.match("^ ", line)
+ if (m != None):
+ # First line of the commit message used for short log
+ if self.message == "":
+ self.message = string.strip(line)
+ continue
+
+ m = re.match("tree", line)
+ if (m != None):
+ continue
+
+ m = re.match("parent", line)
+ if (m != None):
+ continue
+
+ m = re_ident.match(line)
+ if (m != None):
+ date = show_date(m.group('epoch'), m.group('tz'))
+ if m.group(1) == "author":
+ self.author = m.group('ident')
+ self.date = date
+ elif m.group(1) == "committer":
+ self.committer = m.group('ident')
+ self.commit_date = date
+
+ continue
+
+ def get_message(self, with_diff=0):
+ if (with_diff == 1):
+ message = self.diff_tree()
+ else:
+ fp = os.popen("git cat-file commit " + self.commit_sha1)
+ message = fp.read()
+ fp.close()
+
+ return message
+
+ def diff_tree(self):
+ fp = os.popen("git diff-tree --pretty --cc -v -p --always " + self.commit_sha1)
+ diff = fp.read()
+ fp.close()
+ return diff
+
+class DiffWindow:
+ """Diff window.
+ This object represents and manages a single window containing the
+ differences between two revisions on a branch.
+ """
+
+ def __init__(self):
+ self.window = gtk.Window(gtk.WINDOW_TOPLEVEL)
+ self.window.set_border_width(0)
+ self.window.set_title("Git repository browser diff window")
+
+ # Use two thirds of the screen by default
+ screen = self.window.get_screen()
+ monitor = screen.get_monitor_geometry(0)
+ width = int(monitor.width * 0.66)
+ height = int(monitor.height * 0.66)
+ self.window.set_default_size(width, height)
+
+ self.construct()
+
+ def construct(self):
+ """Construct the window contents."""
+ vbox = gtk.VBox()
+ self.window.add(vbox)
+ vbox.show()
+
+ menu_bar = gtk.MenuBar()
+ save_menu = gtk.ImageMenuItem(gtk.STOCK_SAVE)
+ save_menu.connect("activate", self.save_menu_response, "save")
+ save_menu.show()
+ menu_bar.append(save_menu)
+ vbox.pack_start(menu_bar, False, False, 2)
+ menu_bar.show()
+
+ scrollwin = gtk.ScrolledWindow()
+ scrollwin.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
+ scrollwin.set_shadow_type(gtk.SHADOW_IN)
+ vbox.pack_start(scrollwin, expand=True, fill=True)
+ scrollwin.show()
+
+ if have_gtksourceview:
+ self.buffer = gtksourceview.SourceBuffer()
+ slm = gtksourceview.SourceLanguagesManager()
+ gsl = slm.get_language_from_mime_type("text/x-patch")
+ self.buffer.set_highlight(True)
+ self.buffer.set_language(gsl)
+ sourceview = gtksourceview.SourceView(self.buffer)
+ else:
+ self.buffer = gtk.TextBuffer()
+ sourceview = gtk.TextView(self.buffer)
+
+ sourceview.set_editable(False)
+ sourceview.modify_font(pango.FontDescription("Monospace"))
+ scrollwin.add(sourceview)
+ sourceview.show()
+
+
+ def set_diff(self, commit_sha1, parent_sha1):
+ """Set the differences showed by this window.
+ Compares the two trees and populates the window with the
+ differences.
+ """
+ # Diff with the first commit or the last commit shows nothing
+ if (commit_sha1 == 0 or parent_sha1 == 0 ):
+ return
+
+ fp = os.popen("git diff-tree -p " + parent_sha1 + " " + commit_sha1)
+ self.buffer.set_text(fp.read())
+ fp.close()
+ self.window.show()
+
+ def save_menu_response(self, widget, string):
+ dialog = gtk.FileChooserDialog("Save..", None, gtk.FILE_CHOOSER_ACTION_SAVE,
+ (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL,
+ gtk.STOCK_SAVE, gtk.RESPONSE_OK))
+ dialog.set_default_response(gtk.RESPONSE_OK)
+ response = dialog.run()
+ if response == gtk.RESPONSE_OK:
+ patch_buffer = self.buffer.get_text(self.buffer.get_start_iter(),
+ self.buffer.get_end_iter())
+ fp = open(dialog.get_filename(), "w")
+ fp.write(patch_buffer)
+ fp.close()
+ dialog.destroy()
+
+class GitView:
+ """ This is the main class
+ """
+ version = "0.6"
+
+ def __init__(self, with_diff=0):
+ self.with_diff = with_diff
+ self.window = gtk.Window(gtk.WINDOW_TOPLEVEL)
+ self.window.set_border_width(0)
+ self.window.set_title("Git repository browser")
+
+ self.get_bt_sha1()
+
+ # Use three-quarters of the screen by default
+ screen = self.window.get_screen()
+ monitor = screen.get_monitor_geometry(0)
+ width = int(monitor.width * 0.75)
+ height = int(monitor.height * 0.75)
+ self.window.set_default_size(width, height)
+
+ # FIXME AndyFitz!
+ icon = self.window.render_icon(gtk.STOCK_INDEX, gtk.ICON_SIZE_BUTTON)
+ self.window.set_icon(icon)
+
+ self.accel_group = gtk.AccelGroup()
+ self.window.add_accel_group(self.accel_group)
+
+ self.construct()
+
+ def get_bt_sha1(self):
+ """ Update the bt_sha1 dictionary with the
+ respective sha1 details """
+
+ self.bt_sha1 = { }
+ git_dir = os.getenv("GIT_DIR")
+ if (git_dir == None):
+ git_dir = ".git"
+
+ #FIXME the path seperator
+ ref_files = os.listdir(git_dir + "/refs/tags")
+ for file in ref_files:
+ fp = open(git_dir + "/refs/tags/"+file)
+ sha1 = get_sha1_from_tags(string.strip(fp.readline()))
+ try:
+ self.bt_sha1[sha1].append(file)
+ except KeyError:
+ self.bt_sha1[sha1] = [file]
+ fp.close()
+
+
+ #FIXME the path seperator
+ ref_files = os.listdir(git_dir + "/refs/heads")
+ for file in ref_files:
+ fp = open(git_dir + "/refs/heads/" + file)
+ sha1 = get_sha1_from_tags(string.strip(fp.readline()))
+ try:
+ self.bt_sha1[sha1].append(file)
+ except KeyError:
+ self.bt_sha1[sha1] = [file]
+ fp.close()
+
+
+ def construct(self):
+ """Construct the window contents."""
+ paned = gtk.VPaned()
+ paned.pack1(self.construct_top(), resize=False, shrink=True)
+ paned.pack2(self.construct_bottom(), resize=False, shrink=True)
+ self.window.add(paned)
+ paned.show()
+
+
+ def construct_top(self):
+ """Construct the top-half of the window."""
+ vbox = gtk.VBox(spacing=6)
+ vbox.set_border_width(12)
+ vbox.show()
+
+ menu_bar = gtk.MenuBar()
+ menu_bar.set_pack_direction(gtk.PACK_DIRECTION_RTL)
+ help_menu = gtk.MenuItem("Help")
+ menu = gtk.Menu()
+ about_menu = gtk.MenuItem("About")
+ menu.append(about_menu)
+ about_menu.connect("activate", self.about_menu_response, "about")
+ about_menu.show()
+ help_menu.set_submenu(menu)
+ help_menu.show()
+ menu_bar.append(help_menu)
+ vbox.pack_start(menu_bar, False, False, 2)
+ menu_bar.show()
+
+ scrollwin = gtk.ScrolledWindow()
+ scrollwin.set_policy(gtk.POLICY_NEVER, gtk.POLICY_AUTOMATIC)
+ scrollwin.set_shadow_type(gtk.SHADOW_IN)
+ vbox.pack_start(scrollwin, expand=True, fill=True)
+ scrollwin.show()
+
+ self.treeview = gtk.TreeView()
+ self.treeview.set_rules_hint(True)
+ self.treeview.set_search_column(4)
+ self.treeview.connect("cursor-changed", self._treeview_cursor_cb)
+ scrollwin.add(self.treeview)
+ self.treeview.show()
+
+ cell = CellRendererGraph()
+ column = gtk.TreeViewColumn()
+ column.set_resizable(False)
+ column.pack_start(cell, expand=False)
+ column.add_attribute(cell, "node", 1)
+ column.add_attribute(cell, "in-lines", 2)
+ column.add_attribute(cell, "out-lines", 3)
+ self.treeview.append_column(column)
+
+ cell = gtk.CellRendererText()
+ cell.set_property("width-chars", 65)
+ cell.set_property("ellipsize", pango.ELLIPSIZE_END)
+ column = gtk.TreeViewColumn("Message")
+ column.set_resizable(True)
+ column.pack_start(cell, expand=True)
+ column.add_attribute(cell, "text", 4)
+ self.treeview.append_column(column)
+
+ cell = gtk.CellRendererText()
+ cell.set_property("width-chars", 40)
+ cell.set_property("ellipsize", pango.ELLIPSIZE_END)
+ column = gtk.TreeViewColumn("Author")
+ column.set_resizable(True)
+ column.pack_start(cell, expand=True)
+ column.add_attribute(cell, "text", 5)
+ self.treeview.append_column(column)
+
+ cell = gtk.CellRendererText()
+ cell.set_property("ellipsize", pango.ELLIPSIZE_END)
+ column = gtk.TreeViewColumn("Date")
+ column.set_resizable(True)
+ column.pack_start(cell, expand=True)
+ column.add_attribute(cell, "text", 6)
+ self.treeview.append_column(column)
+
+ return vbox
+
+ def about_menu_response(self, widget, string):
+ dialog = gtk.AboutDialog()
+ dialog.set_name("Gitview")
+ dialog.set_version(GitView.version)
+ dialog.set_authors(["Aneesh Kumar K.V <aneesh.kumar@hp.com>"])
+ dialog.set_website("http://www.kernel.org/pub/software/scm/git/")
+ dialog.set_copyright("Use and distribute under the terms of the GNU General Public License")
+ dialog.set_wrap_license(True)
+ dialog.run()
+ dialog.destroy()
+
+
+ def construct_bottom(self):
+ """Construct the bottom half of the window."""
+ vbox = gtk.VBox(False, spacing=6)
+ vbox.set_border_width(12)
+ (width, height) = self.window.get_size()
+ vbox.set_size_request(width, int(height / 2.5))
+ vbox.show()
+
+ self.table = gtk.Table(rows=4, columns=4)
+ self.table.set_row_spacings(6)
+ self.table.set_col_spacings(6)
+ vbox.pack_start(self.table, expand=False, fill=True)
+ self.table.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ label = gtk.Label()
+ label.set_markup("<b>Revision:</b>")
+ align.add(label)
+ self.table.attach(align, 0, 1, 0, 1, gtk.FILL, gtk.FILL)
+ label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ self.revid_label = gtk.Label()
+ self.revid_label.set_selectable(True)
+ align.add(self.revid_label)
+ self.table.attach(align, 1, 2, 0, 1, gtk.EXPAND | gtk.FILL, gtk.FILL)
+ self.revid_label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ label = gtk.Label()
+ label.set_markup("<b>Committer:</b>")
+ align.add(label)
+ self.table.attach(align, 0, 1, 1, 2, gtk.FILL, gtk.FILL)
+ label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ self.committer_label = gtk.Label()
+ self.committer_label.set_selectable(True)
+ align.add(self.committer_label)
+ self.table.attach(align, 1, 2, 1, 2, gtk.EXPAND | gtk.FILL, gtk.FILL)
+ self.committer_label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ label = gtk.Label()
+ label.set_markup("<b>Timestamp:</b>")
+ align.add(label)
+ self.table.attach(align, 0, 1, 2, 3, gtk.FILL, gtk.FILL)
+ label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ self.timestamp_label = gtk.Label()
+ self.timestamp_label.set_selectable(True)
+ align.add(self.timestamp_label)
+ self.table.attach(align, 1, 2, 2, 3, gtk.EXPAND | gtk.FILL, gtk.FILL)
+ self.timestamp_label.show()
+ align.show()
+
+ align = gtk.Alignment(0.0, 0.5)
+ label = gtk.Label()
+ label.set_markup("<b>Parents:</b>")
+ align.add(label)
+ self.table.attach(align, 0, 1, 3, 4, gtk.FILL, gtk.FILL)
+ label.show()
+ align.show()
+ self.parents_widgets = []
+
+ align = gtk.Alignment(0.0, 0.5)
+ label = gtk.Label()
+ label.set_markup("<b>Children:</b>")
+ align.add(label)
+ self.table.attach(align, 2, 3, 3, 4, gtk.FILL, gtk.FILL)
+ label.show()
+ align.show()
+ self.children_widgets = []
+
+ scrollwin = gtk.ScrolledWindow()
+ scrollwin.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
+ scrollwin.set_shadow_type(gtk.SHADOW_IN)
+ vbox.pack_start(scrollwin, expand=True, fill=True)
+ scrollwin.show()
+
+ if have_gtksourceview:
+ self.message_buffer = gtksourceview.SourceBuffer()
+ slm = gtksourceview.SourceLanguagesManager()
+ gsl = slm.get_language_from_mime_type("text/x-patch")
+ self.message_buffer.set_highlight(True)
+ self.message_buffer.set_language(gsl)
+ sourceview = gtksourceview.SourceView(self.message_buffer)
+ else:
+ self.message_buffer = gtk.TextBuffer()
+ sourceview = gtk.TextView(self.message_buffer)
+
+ sourceview.set_editable(False)
+ sourceview.modify_font(pango.FontDescription("Monospace"))
+ scrollwin.add(sourceview)
+ sourceview.show()
+
+ return vbox
+
+ def _treeview_cursor_cb(self, *args):
+ """Callback for when the treeview cursor changes."""
+ (path, col) = self.treeview.get_cursor()
+ commit = self.model[path][0]
+
+ if commit.committer is not None:
+ committer = commit.committer
+ timestamp = commit.commit_date
+ message = commit.get_message(self.with_diff)
+ revid_label = commit.commit_sha1
+ else:
+ committer = ""
+ timestamp = ""
+ message = ""
+ revid_label = ""
+
+ self.revid_label.set_text(revid_label)
+ self.committer_label.set_text(committer)
+ self.timestamp_label.set_text(timestamp)
+ self.message_buffer.set_text(message)
+
+ for widget in self.parents_widgets:
+ self.table.remove(widget)
+
+ self.parents_widgets = []
+ self.table.resize(4 + len(commit.parent_sha1) - 1, 4)
+ for idx, parent_id in enumerate(commit.parent_sha1):
+ self.table.set_row_spacing(idx + 3, 0)
+
+ align = gtk.Alignment(0.0, 0.0)
+ self.parents_widgets.append(align)
+ self.table.attach(align, 1, 2, idx + 3, idx + 4,
+ gtk.EXPAND | gtk.FILL, gtk.FILL)
+ align.show()
+
+ hbox = gtk.HBox(False, 0)
+ align.add(hbox)
+ hbox.show()
+
+ label = gtk.Label(parent_id)
+ label.set_selectable(True)
+ hbox.pack_start(label, expand=False, fill=True)
+ label.show()
+
+ image = gtk.Image()
+ image.set_from_stock(gtk.STOCK_JUMP_TO, gtk.ICON_SIZE_MENU)
+ image.show()
+
+ button = gtk.Button()
+ button.add(image)
+ button.set_relief(gtk.RELIEF_NONE)
+ button.connect("clicked", self._go_clicked_cb, parent_id)
+ hbox.pack_start(button, expand=False, fill=True)
+ button.show()
+
+ image = gtk.Image()
+ image.set_from_stock(gtk.STOCK_FIND, gtk.ICON_SIZE_MENU)
+ image.show()
+
+ button = gtk.Button()
+ button.add(image)
+ button.set_relief(gtk.RELIEF_NONE)
+ button.set_sensitive(True)
+ button.connect("clicked", self._show_clicked_cb,
+ commit.commit_sha1, parent_id)
+ hbox.pack_start(button, expand=False, fill=True)
+ button.show()
+
+ # Populate with child details
+ for widget in self.children_widgets:
+ self.table.remove(widget)
+
+ self.children_widgets = []
+ try:
+ child_sha1 = Commit.children_sha1[commit.commit_sha1]
+ except KeyError:
+ # We don't have child
+ child_sha1 = [ 0 ]
+
+ if ( len(child_sha1) > len(commit.parent_sha1)):
+ self.table.resize(4 + len(child_sha1) - 1, 4)
+
+ for idx, child_id in enumerate(child_sha1):
+ self.table.set_row_spacing(idx + 3, 0)
+
+ align = gtk.Alignment(0.0, 0.0)
+ self.children_widgets.append(align)
+ self.table.attach(align, 3, 4, idx + 3, idx + 4,
+ gtk.EXPAND | gtk.FILL, gtk.FILL)
+ align.show()
+
+ hbox = gtk.HBox(False, 0)
+ align.add(hbox)
+ hbox.show()
+
+ label = gtk.Label(child_id)
+ label.set_selectable(True)
+ hbox.pack_start(label, expand=False, fill=True)
+ label.show()
+
+ image = gtk.Image()
+ image.set_from_stock(gtk.STOCK_JUMP_TO, gtk.ICON_SIZE_MENU)
+ image.show()
+
+ button = gtk.Button()
+ button.add(image)
+ button.set_relief(gtk.RELIEF_NONE)
+ button.connect("clicked", self._go_clicked_cb, child_id)
+ hbox.pack_start(button, expand=False, fill=True)
+ button.show()
+
+ image = gtk.Image()
+ image.set_from_stock(gtk.STOCK_FIND, gtk.ICON_SIZE_MENU)
+ image.show()
+
+ button = gtk.Button()
+ button.add(image)
+ button.set_relief(gtk.RELIEF_NONE)
+ button.set_sensitive(True)
+ button.connect("clicked", self._show_clicked_cb,
+ child_id, commit.commit_sha1)
+ hbox.pack_start(button, expand=False, fill=True)
+ button.show()
+
+ def _destroy_cb(self, widget):
+ """Callback for when a window we manage is destroyed."""
+ self.quit()
+
+
+ def quit(self):
+ """Stop the GTK+ main loop."""
+ gtk.main_quit()
+
+ def run(self, args):
+ self.set_branch(args)
+ self.window.connect("destroy", self._destroy_cb)
+ self.window.show()
+ gtk.main()
+
+ def set_branch(self, args):
+ """Fill in different windows with info from the reposiroty"""
+ fp = os.popen("git rev-parse --sq --default HEAD " + list_to_string(args, 1))
+ git_rev_list_cmd = fp.read()
+ fp.close()
+ fp = os.popen("git rev-list --header --topo-order --parents " + git_rev_list_cmd)
+ self.update_window(fp)
+
+ def update_window(self, fp):
+ commit_lines = []
+
+ self.model = gtk.ListStore(gobject.TYPE_PYOBJECT, gobject.TYPE_PYOBJECT,
+ gobject.TYPE_PYOBJECT, gobject.TYPE_PYOBJECT, str, str, str)
+
+ # used for cursor positioning
+ self.index = {}
+
+ self.colours = {}
+ self.nodepos = {}
+ self.incomplete_line = {}
+
+ index = 0
+ last_colour = 0
+ last_nodepos = -1
+ out_line = []
+ input_line = fp.readline()
+ while (input_line != ""):
+ # The commit header ends with '\0'
+ # This NULL is immediately followed by the sha1 of the
+ # next commit
+ if (input_line[0] != '\0'):
+ commit_lines.append(input_line)
+ input_line = fp.readline()
+ continue;
+
+ commit = Commit(commit_lines)
+ if (commit != None ):
+ (out_line, last_colour, last_nodepos) = self.draw_graph(commit,
+ index, out_line,
+ last_colour,
+ last_nodepos)
+ self.index[commit.commit_sha1] = index
+ index += 1
+
+ # Skip the '\0
+ commit_lines = []
+ commit_lines.append(input_line[1:])
+ input_line = fp.readline()
+
+ fp.close()
+
+ self.treeview.set_model(self.model)
+ self.treeview.show()
+
+ def draw_graph(self, commit, index, out_line, last_colour, last_nodepos):
+ in_line=[]
+
+ # | -> outline
+ # X
+ # |\ <- inline
+
+ # Reset nodepostion
+ if (last_nodepos > 5):
+ last_nodepos = 0
+
+ # Add the incomplete lines of the last cell in this
+ for sha1 in self.incomplete_line.keys():
+ if ( sha1 != commit.commit_sha1):
+ for pos in self.incomplete_line[sha1]:
+ in_line.append((pos, pos, self.colours[sha1]))
+ else:
+ del self.incomplete_line[sha1]
+
+ try:
+ colour = self.colours[commit.commit_sha1]
+ except KeyError:
+ last_colour +=1
+ self.colours[commit.commit_sha1] = last_colour
+ colour = last_colour
+ try:
+ node_pos = self.nodepos[commit.commit_sha1]
+ except KeyError:
+ last_nodepos +=1
+ self.nodepos[commit.commit_sha1] = last_nodepos
+ node_pos = last_nodepos
+
+ #The first parent always continue on the same line
+ try:
+ # check we alreay have the value
+ tmp_node_pos = self.nodepos[commit.parent_sha1[0]]
+ except KeyError:
+ self.colours[commit.parent_sha1[0]] = colour
+ self.nodepos[commit.parent_sha1[0]] = node_pos
+
+ in_line.append((node_pos, self.nodepos[commit.parent_sha1[0]],
+ self.colours[commit.parent_sha1[0]]))
+
+ self.add_incomplete_line(commit.parent_sha1[0], index+1)
+
+ if (len(commit.parent_sha1) > 1):
+ for parent_id in commit.parent_sha1[1:]:
+ try:
+ tmp_node_pos = self.nodepos[parent_id]
+ except KeyError:
+ last_colour += 1;
+ self.colours[parent_id] = last_colour
+ last_nodepos +=1
+ self.nodepos[parent_id] = last_nodepos
+
+ in_line.append((node_pos, self.nodepos[parent_id],
+ self.colours[parent_id]))
+ self.add_incomplete_line(parent_id, index+1)
+
+
+ try:
+ branch_tag = self.bt_sha1[commit.commit_sha1]
+ except KeyError:
+ branch_tag = [ ]
+
+
+ node = (node_pos, colour, branch_tag)
+
+ self.model.append([commit, node, out_line, in_line,
+ commit.message, commit.author, commit.date])
+
+ return (in_line, last_colour, last_nodepos)
+
+ def add_incomplete_line(self, sha1, index):
+ try:
+ self.incomplete_line[sha1].append(self.nodepos[sha1])
+ except KeyError:
+ self.incomplete_line[sha1] = [self.nodepos[sha1]]
+
+
+ def _go_clicked_cb(self, widget, revid):
+ """Callback for when the go button for a parent is clicked."""
+ try:
+ self.treeview.set_cursor(self.index[revid])
+ except KeyError:
+ print "Revision %s not present in the list" % revid
+ # revid == 0 is the parent of the first commit
+ if (revid != 0 ):
+ print "Try running gitview without any options"
+
+ self.treeview.grab_focus()
+
+ def _show_clicked_cb(self, widget, commit_sha1, parent_sha1):
+ """Callback for when the show button for a parent is clicked."""
+ window = DiffWindow()
+ window.set_diff(commit_sha1, parent_sha1)
+ self.treeview.grab_focus()
+
+if __name__ == "__main__":
+ without_diff = 0
+
+ if (len(sys.argv) > 1 ):
+ if (sys.argv[1] == "--without-diff"):
+ without_diff = 1
+
+ view = GitView( without_diff != 1)
+ view.run(sys.argv[without_diff:])
+
+
--- /dev/null
+gitview(1)
+==========
+
+NAME
+----
+gitview - A GTK based repository browser for git
+
+SYNOPSIS
+--------
+'gitview' [options] [args]
+
+DESCRIPTION
+---------
+
+Dependencies
+
+* Python 2.4
+* PyGTK 2.8 or later
+* PyCairo 1.0 or later
+
+OPTIONS
+------
+ --without-diff
+ If the user doesn't want to list the commit diffs in the main window. This may speed up the repository browsing.
+
+ <args>
+ All the valid option for git-rev-list(1)
+
+EXAMPLES
+------
+ gitview v2.6.12.. include/scsi drivers/scsi
+ Show as the changes since version v2.6.12 that changed any file in the include/scsi
+ or drivers/scsi subdirectories
+
+ gitview --since=2.weeks.ago
+ Show the changes during the last two weeks
+
+
#!/bin/sh
#
-#
+# Copyright (c) 2005, 2006 Junio C Hamano
USAGE='[--signoff] [--dotest=<dir>] [--utf8] [--binary] [--3way] <mbox>
or, when resuming [--skip | --resolved]'
. git-sh-setup
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
stop_here () {
echo "$1" >"$dotest/next"
exit 1
USAGE='[-u] [-k] [-q] [-m] (-c .dotest/<num> | mbox) [signoff]'
. git-sh-setup
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
keep_subject= query_apply= continue= utf8= resume=t
while case "$#" in 0) break ;; esac
do
}
# update the index with all the changes we got
+ system('git-diff-files --name-only -z | '.
+ 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
system('git-ls-files --others -z | '.
'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
- system('git-ls-files --deleted -z | '.
- 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
- system('git-ls-files -z | '.
- 'git-update-index -z --stdin') == 0 or die "$! $?\n";
return 1;
}
# imports don't give us good info
# on added files. Shame on them
if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
- system('git-ls-files --others -z | '.
- 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
system('git-ls-files --deleted -z | '.
'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
+ system('git-ls-files --others -z | '.
+ 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
}
# TODO: handle removed_directories and renamed_directories:
-
- if (my $add = $ps->{new_files}) {
- while (@$add) {
- my @slice = splice(@$add, 0, 100);
- system('git-update-index','--add','--',@slice) == 0 or
- die "Error in git-update-index --add: $! $?\n";
- }
- }
-
+
if (my $del = $ps->{removed_files}) {
unlink @$del;
while (@$del) {
}
}
+ if (my $add = $ps->{new_files}) {
+ while (@$add) {
+ my @slice = splice(@$add, 0, 100);
+ system('git-update-index','--add','--',@slice) == 0 or
+ die "Error in git-update-index --add: $! $?\n";
+ }
+ }
+
if (my $mod = $ps->{modified_files}) {
while (@$mod) {
my @slice = splice(@$mod, 0, 100);
[ -e "$dir" ] && echo "$dir already exists." && usage
mkdir -p "$dir" &&
D=$(cd "$dir" && pwd) &&
+trap 'err=$?; rm -r $D; exit $err' exit
case "$bare" in
yes) GIT_DIR="$D" ;;
*) GIT_DIR="$D/.git" ;;
git checkout
esac
fi
+
+trap - exit
+
}
}
}
+ return undef;
}
sub file {
my($self,$fn,$rev) = @_;
$self->_file($fn,$rev) and $res = $self->_line($fh);
if (!defined $res) {
- # retry
+ print STDERR "Server has gone away while fetching $fn $rev, retrying...\n";
+ truncate $fh, 0;
$self->conn();
- $self->_file($fn,$rev)
- or die "No file command send\n";
+ $self->_file($fn,$rev) or die "No file command send";
$res = $self->_line($fh);
- die "No input: $fn $rev\n" unless defined $res;
+ die "Retry failed" unless defined $res;
}
close ($fh);
- if ($res eq '') {
- die "Looks like the server has gone away while fetching $fn $rev -- exiting!";
- }
-
return ($name, $res);
}
return $val;
}
-sub mergebase {
- my ($other) = @_;
+sub current_branch {
my $fh;
- open $fh, '-|', 'git-merge-base', '--all', 'HEAD', $other or die "$!";
- my (@mb) = map { chomp; $_ } <$fh>;
- close $fh or die "$!";
- return @mb;
+ open $fh, '-|', 'git-symbolic-ref', 'HEAD' or die "$!";
+ my ($bra) = <$fh>;
+ chomp($bra);
+ $bra =~ s|^refs/heads/||;
+ if ($bra ne 'master') {
+ $bra = " into $bra";
+ } else {
+ $bra = "";
+ }
+
+ return $bra;
}
sub shortlog {
- my ($tip, $limit, @base) = @_;
+ my ($tip) = @_;
my ($fh, @result);
- open $fh, '-|', ('git-log', "--max-count=$limit", '--topo-order',
- '--pretty=oneline', $tip, map { "^$_" } @base)
+ open $fh, '-|', ('git-log', '--topo-order',
+ '--pretty=oneline', $tip, '^HEAD')
or die "$!";
while (<$fh>) {
s/^[0-9a-f]{40}\s+//;
}
push @msg, $this;
}
-print "Merge ", join("; ", @msg), "\n";
+
+my $into = current_branch();
+
+print "Merge ", join("; ", @msg), $into, "\n";
if (!repoconfig) {
exit(0);
for (@origin) {
my ($sha1, $name) = @$_;
- my @mb = mergebase($sha1);
- my @log = shortlog($sha1, $limit + 1, @mb);
+ my @log = shortlog($sha1);
if ($limit + 1 <= @log) {
print "\n* $name: (" . scalar(@log) . " commits)\n";
}
1,*,)
# We are not doing octopus, not fast forward, and have only
# one common. See if it is really trivial.
+ git var GIT_COMMITTER_IDENT >/dev/null || exit
+
echo "Trying really trivial in-index merge..."
git-update-index --refresh 2>/dev/null
if git-read-tree --trivial -m -u $common $head "$1" &&
;;
esac
+# We are going to make a new commit.
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
case "$use_strategies" in
'')
case "$#" in
$dst = shift @dstArgs;
$bad = "";
+ for ($src, $dst) {
+ # Be nicer to end-users by doing ".//a/./b/.//./c" ==> "a/b/c"
+ s|^\./||;
+ s|/\./|/| while (m|/\./|);
+ s|//+|/|g;
+ # Also "a/b/../c" ==> "a/c"
+ 1 while (s,(^|/)[^/]+/\.\./,$1,);
+ }
+
if ($opt_v) {
print "Checking rename of '$src' to '$dst'\n";
}
# Copyright (c) 2005 Junio C Hamano.
#
-USAGE='<upstream> [<head>]'
+USAGE='[--onto <newbase>] <upstream> [<branch>]'
+LONG_USAGE='If <branch> is specified, switch to that branch first. Then,
+extract commits in the current branch that are not in <upstream>,
+and reconstruct the current on top of <upstream>, discarding the original
+development history. If --onto <newbase> is specified, the history is
+reconstructed on top of <newbase>, instead of <upstream>. For example,
+while on "topic" branch:
+
+ A---B---C topic
+ /
+ D---E---F---G master
+
+ $ '"$0"' --onto master~1 master topic
+
+would rewrite the history to look like this:
+
+
+ A'\''--B'\''--C'\'' topic
+ /
+ D---E---F---G master
+'
+
. git-sh-setup
-case $# in 1|2) ;; *) usage ;; esac
+unset newbase
+while case "$#" in 0) break ;; esac
+do
+ case "$1" in
+ --onto)
+ test 2 -le "$#" || usage
+ newbase="$2"
+ shift
+ ;;
+ -*)
+ usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+done
# Make sure we do not have .dotest
if mkdir .dotest
;;
esac
-# The other head is given. Make sure it is valid.
-other=$(git-rev-parse --verify "$1^0") || usage
-
-# Make sure the branch to rebase is valid.
-head=$(git-rev-parse --verify "${2-HEAD}^0") || exit
+# The upstream head must be given. Make sure it is valid.
+upstream_name="$1"
+upstream=`git rev-parse --verify "${upstream_name}^0"` ||
+ die "invalid upsteram $upstream_name"
# If a hook exists, give it a chance to interrupt
if test -x "$GIT_DIR/hooks/pre-rebase"
# If the branch to rebase is given, first switch to it.
case "$#" in
2)
+ branch_name="$2"
git-checkout "$2" || usage
+ ;;
+*)
+ branch_name=`git symbolic-ref HEAD` || die "No current branch"
+ branch_name=`expr "$branch_name" : 'refs/heads/\(.*\)'`
+ ;;
esac
+branch=$(git-rev-parse --verify "${branch_name}^0") || exit
-mb=$(git-merge-base "$other" "$head")
+# Make sure the branch to rebase onto is valid.
+onto_name=${newbase-"$upstream_name"}
+onto=$(git-rev-parse --verify "${onto_name}^0") || exit
-# Check if we are already based on $other.
-if test "$mb" = "$other"
+# Now we are rebasing commits $upstream..$branch on top of $onto
+
+# Check if we are already based on $onto, but this should be
+# done only when upstream and onto are the same.
+if test "$upstream" = "onto"
then
- echo >&2 "Current branch `git-symbolic-ref HEAD` is up to date."
- exit 0
+ mb=$(git-merge-base "$onto" "$branch")
+ if test "$mb" = "$onto"
+ then
+ echo >&2 "Current branch $branch_name is up to date."
+ exit 0
+ fi
fi
-# Rewind the head to "$other"
-git-reset --hard "$other"
+# Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
+git-reset --hard "$onto"
-# If the $other is a proper descendant of the tip of the branch, then
+# If the $onto is a proper descendant of the tip of the branch, then
# we just fast forwarded.
-if test "$mb" = "$head"
+if test "$mb" = "$onto"
then
- echo >&2 "Fast-forwarded $head to $other."
+ echo >&2 "Fast-forwarded $branch to $newbase."
exit 0
fi
-git-format-patch -k --stdout --full-index "$other" ORIG_HEAD |
+git-format-patch -k --stdout --full-index "$upstream" ORIG_HEAD |
git am --binary -3 -k
# it is ok if this fails -- it may already
# have been culled by checkout-index.
unlink $_;
+ while (s|/[^/]*$||) {
+ rmdir($_) or last;
+ }
}
}
' $tmp-exists
;;
esac
+# We are going to make a new commit.
+git var GIT_COMMITTER_IDENT >/dev/null || exit
+
# Find an optimum merge base if there are more than one candidates.
LF='
'
result=$(git-write-tree 2>/dev/null) || {
echo >&2 "Simple $me fails; trying Automatic $me."
git-merge-index -o git-merge-one-file -a || {
- echo >&2 "Automatic $me failed. After fixing it up,"
- echo >&2 "you can use \"git commit -F .msg\""
+ echo >&2 "Automatic $me failed. After resolving the conflicts,"
+ echo >&2 "mark the corrected paths with 'git-update-index <paths>'"
+ echo >&2 "and commit with 'git commit -F .msg'"
case "$me" in
cherry-pick)
echo >&2 "You may choose to use the following when making"
#!/bin/sh
# Copyright (c) 2005 Linus Torvalds
-USAGE='[-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <tagname> [<head>]'
+USAGE='-l [<pattern>] | [-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <tagname> [<head>]'
SUBDIRECTORY_OK='Yes'
. git-sh-setup
force=
message=
username=
+list=
while case "$#" in 0) break ;; esac
do
case "$1" in
-f)
force=1
;;
+ -l)
+ cd "$GIT_DIR/refs" &&
+ case "$#" in
+ 1)
+ find tags -type f -print ;;
+ *)
+ shift
+ find tags -type f -print | grep "$@" ;;
+ esac
+ exit $?
+ ;;
-m)
annotate=1
shift
return offset;
}
+static const char au_env[] = "GIT_AUTHOR_NAME";
+static const char co_env[] = "GIT_COMMITTER_NAME";
+static const char *env_hint =
+"\n*** Environment problem:\n"
+"*** Your name cannot be determined from your system services (gecos).\n"
+"*** You would need to set %s and %s\n"
+"*** environment variables; otherwise you won't be able to perform\n"
+"*** certain operations because of \"empty ident\" errors.\n"
+"*** Alternatively, you can use user.name configuration variable.\n\n";
+
static const char *get_ident(const char *name, const char *email,
- const char *date_str)
+ const char *date_str, int error_on_no_name)
{
static char buffer[1000];
char date[50];
if (!email)
email = git_default_email;
- if (!*name || !*email)
- die("empty ident %s <%s> not allowed",
- name, email);
+ if (!*name) {
+ if (name == git_default_name && env_hint) {
+ fprintf(stderr, env_hint, au_env, co_env);
+ env_hint = NULL; /* warn only once, for "git-var -l" */
+ }
+ if (error_on_no_name)
+ die("empty ident %s <%s> not allowed", name, email);
+ }
strcpy(date, git_default_date);
if (date_str)
return buffer;
}
-const char *git_author_info(void)
+const char *git_author_info(int error_on_no_name)
{
return get_ident(getenv("GIT_AUTHOR_NAME"),
getenv("GIT_AUTHOR_EMAIL"),
- getenv("GIT_AUTHOR_DATE"));
+ getenv("GIT_AUTHOR_DATE"),
+ error_on_no_name);
}
-const char *git_committer_info(void)
+const char *git_committer_info(int error_on_no_name)
{
return get_ident(getenv("GIT_COMMITTER_NAME"),
getenv("GIT_COMMITTER_EMAIL"),
- getenv("GIT_COMMITTER_DATE"));
+ getenv("GIT_COMMITTER_DATE"),
+ error_on_no_name);
}
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
+#ifndef NO_ICONV
#include <iconv.h>
+#endif
#include "git-compat-util.h"
#include "cache.h"
static void convert_to_utf8(char *line, char *charset)
{
+#ifndef NO_ICONV
char *in, *out;
size_t insize, outsize, nrc;
char outbuf[4096]; /* cheat */
return;
*out = 0;
strcpy(line, outbuf);
+#endif
}
static void decode_header_bq(char *it)
" ordering output:\n"
" --merge-order [ --show-breaks ]\n"
" --topo-order\n"
+" --date-order\n"
" formatting output:\n"
" --parents\n"
" --objects\n"
static int show_breaks = 0;
static int stop_traversal = 0;
static int topo_order = 0;
+static int lifo = 1;
static int no_merges = 0;
static const char **paths = NULL;
static int remove_empty_trees = 0;
}
if (!strcmp(arg, "--topo-order")) {
topo_order = 1;
+ lifo = 1;
+ limited = 1;
+ continue;
+ }
+ if (!strcmp(arg, "--date-order")) {
+ topo_order = 1;
+ lifo = 0;
limited = 1;
continue;
}
if (limited)
list = limit_list(list);
if (topo_order)
- sort_in_topological_order(&list);
+ sort_in_topological_order(&list, lifo);
show_commit_list(list);
} else {
#ifndef NO_OPENSSL
"--show-breaks",
"--sparse",
"--topo-order",
+ "--date-order",
"--unpacked",
NULL
};
continue;
}
if (!strcmp(arg, "--short") ||
- !strncmp(arg, "--short=", 9)) {
+ !strncmp(arg, "--short=", 8)) {
filter &= ~(DO_FLAGS|DO_NOREV);
verify = 1;
abbrev = DEFAULT_ABBREV;
- if (arg[8] == '=')
- abbrev = strtoul(arg + 9, NULL, 10);
+ if (arg[7] == '=')
+ abbrev = strtoul(arg + 8, NULL, 10);
if (abbrev < MINIMUM_ABBREV)
abbrev = MINIMUM_ABBREV;
else if (40 <= abbrev)
sprintf(path, "%s/pack", objdir);
len = strlen(path);
dir = opendir(path);
- if (!dir)
+ if (!dir) {
+ fprintf(stderr, "unable to open object pack directory: %s: %s\n", path, strerror(errno));
return;
+ }
path[len++] = '/';
while ((de = readdir(dir)) != NULL) {
int namelen = strlen(de->d_name);
int num_rev, i, extra = 0;
int all_heads = 0, all_tags = 0;
int all_mask, all_revs;
+ int lifo = 1;
char head_path[128];
const char *head_path_p;
int head_path_len;
int no_name = 0;
int sha1_name = 0;
int shown_merge_point = 0;
- int topo_order = 0;
int with_current_branch = 0;
int head_at = -1;
else if (!strcmp(arg, "--independent"))
independent = 1;
else if (!strcmp(arg, "--topo-order"))
- topo_order = 1;
+ lifo = 1;
+ else if (!strcmp(arg, "--date-order"))
+ lifo = 0;
else
usage(show_branch_usage);
ac--; av++;
exit(0);
/* Sort topologically */
- if (topo_order)
- sort_in_topological_order(&seen);
+ sort_in_topological_order(&seen, lifo);
/* Give names to commits */
if (!sha1_name && !no_name)
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2006 Shawn Pearce
+#
+
+test_description='git-reset should cull empty subdirs'
+. ./test-lib.sh
+
+test_expect_success \
+ 'creating initial files' \
+ 'mkdir path0 &&
+ cp ../../COPYING path0/COPYING &&
+ git-add path0/COPYING &&
+ git-commit -m add -a'
+
+test_expect_success \
+ 'creating second files' \
+ 'mkdir path1 &&
+ mkdir path1/path2 &&
+ cp ../../COPYING path1/path2/COPYING &&
+ cp ../../COPYING path1/COPYING &&
+ cp ../../COPYING COPYING &&
+ cp ../../COPYING path0/COPYING-TOO &&
+ git-add path1/path2/COPYING &&
+ git-add path1/COPYING &&
+ git-add COPYING &&
+ git-add path0/COPYING-TOO &&
+ git-commit -m change -a'
+
+test_expect_success \
+ 'resetting tree HEAD^' \
+ 'git-reset --hard HEAD^'
+
+test_expect_success \
+ 'checking initial files exist after rewind' \
+ 'test -d path0 &&
+ test -f path0/COPYING'
+
+test_expect_failure \
+ 'checking lack of path1/path2/COPYING' \
+ 'test -f path1/path2/COPYING'
+
+test_expect_failure \
+ 'checking lack of path1/COPYING' \
+ 'test -f path1/COPYING'
+
+test_expect_failure \
+ 'checking lack of COPYING' \
+ 'test -f COPYING'
+
+test_expect_failure \
+ 'checking checking lack of path1/COPYING-TOO' \
+ 'test -f path0/COPYING-TOO'
+
+test_expect_failure \
+ 'checking lack of path1/path2' \
+ 'test -d path1/path2'
+
+test_expect_failure \
+ 'checking lack of path1' \
+ 'test -d path1'
+
+test_done
fi
}
+# Most tests can use the created repository, but some amy need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+ test "$#" = 1 ||
+ error "bug in the test script: not 1 parameter to test-create-repo"
+ owd=`pwd`
+ repo="$1"
+ mkdir "$repo"
+ cd "$repo" || error "Cannot setup test environment"
+ "$GIT_EXEC_PATH/git" init-db --template=$GIT_EXEC_PATH/templates/blt/ 2>/dev/null ||
+ error "cannot run git init-db -- have you built things yet?"
+ mv .git/hooks .git/hooks-disabled
+ cd "$owd"
+}
+
test_done () {
trap - exit
case "$test_failure" in
# Test repository
test=trash
rm -fr "$test"
-mkdir "$test"
-cd "$test" || error "Cannot setup test environment"
-"$GIT_EXEC_PATH/git" init-db --template=../../templates/blt/ 2>/dev/null ||
-error "cannot run git init-db -- have you built things yet?"
-
-mv .git/hooks .git/hooks-disabled
+test_create_repo $test
+cd "$test"
static char *capabilities = "multi_ack";
struct object *o = parse_object(sha1);
+ if (!o)
+ die("git-upload-pack: cannot find object %s:", sha1_to_hex(sha1));
+
if (capabilities)
packet_write(1, "%s %s%c%s\n", sha1_to_hex(sha1), refname,
0, capabilities);
struct git_var {
const char *name;
- const char *(*read)(void);
+ const char *(*read)(int);
};
static struct git_var git_vars[] = {
{ "GIT_COMMITTER_IDENT", git_committer_info },
{
struct git_var *ptr;
for(ptr = git_vars; ptr->read; ptr++) {
- printf("%s=%s\n", ptr->name, ptr->read());
+ printf("%s=%s\n", ptr->name, ptr->read(0));
}
}
val = NULL;
for(ptr = git_vars; ptr->read; ptr++) {
if (strcmp(var, ptr->name) == 0) {
- val = ptr->read();
+ val = ptr->read(1);
break;
}
}
projects / git.git / commitdiff